dsAdslAtucPhysExtnExtendedPsdStatus

DASAN-ADSL-MIB · .1.3.6.1.4.1.6296.9.5.1.1.4.1.34
MIB view Table view

Object

column Enumeration 
GlobespanVirata parameter that indicates whether an extended or the standard upstream PSD is used - for G.Span Plus mode of operation only. Only supported for G.Span Plus, therefore this parameter is not valid for ADSL2/ADSL2plus modes of operation.

Context

MIB
DASAN-ADSL-MIB
OID
.1.3.6.1.4.1.6296.9.5.1.1.4.1.34
Type
column
Access
readonly
Status
current
Parent
dsAdslAtucPhysExtnEntry
Table
dsAdslAtucPhysExtnTable
Siblings
27

Syntax

Enumeration

Values & Constraints

Enumerated Values
0standard
1jj100
32768extended

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
dsAdslAtucPhysExtnOpState
This object indicates the operational state of the ATU. Values include idle,handshake, training, etc.
columnEnumeration.1.3.6.1.4.1.6296.9.5.1.1.4.1.1
dsAdslAtucPhysExtnParametricTestResult
Indicates the Result of the Parametric Test conducted on the Xcvr.
columnEnumeration.1.3.6.1.4.1.6296.9.5.1.1.4.1.10
dsAdslAtucPhysExtnActualStd
This object provides actual ATU-C configuration based on outcome of negotiation with ATU-R. In this case, the parameter provides actual standard used for the connection.
columnEnumeration.1.3.6.1.4.1.6296.9.5.1.1.4.1.2
dsAdslAtucPhysExtnDataBoostStatus
This object indicates whether DataBoost is utilized for the connection.
columnEnumeration.1.3.6.1.4.1.6296.9.5.1.1.4.1.21
dsAdslAtucPhysExtnTestArray
This object indicates the Parametric Test Array. Every Four octects refer to one element in this array of octets.
columnOctetString.1.3.6.1.4.1.6296.9.5.1.1.4.1.22
dsAdslAtucPhysExtnChanPerfCD
The near-end delineated total cell count performance parameter is a count of the total number of cells passed through the cell delineation and HEC function process operating on th…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6296.9.5.1.1.4.1.23
dsAdslAtucPhysExtnChanPerfBE
The near-end idle bit error count performance parameter is a count of the number of bit errors in the idle cell payload received in the ATM Data Path at the near-end. (Not availab…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6296.9.5.1.1.4.1.24
dsAdslAtucPhysExtnDeltHLINSCus
DELT-related parameter that provides the scale factor to be applied to the upstream Hlin(f) values.(Not available for ADSL and ADSL2plus).
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6296.9.5.1.1.4.1.25
dsAdslAtucPhysExtnDeltHLINpsus
DELT-related parameter that provides an array of complex upstream Hlin(f) values in linear scale. (Not available for ADSL and ADSL2plus). Every two octets refer to one element in…
columnOctetString.1.3.6.1.4.1.6296.9.5.1.1.4.1.26
dsAdslAtucPhysExtnDeltHLOGMTus
DELT-related parameter that provides the number of symbols used to measure the upstream Hlog(f).(Not available for ADSL and ADSL2plus).
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6296.9.5.1.1.4.1.27
dsAdslAtucPhysExtnDeltHLOGpsus
DELT-related parameter that provides an array of real upstream Hlog(f) values in dB. (Not available for ADSL and ADSL2plus). Every two octets refer to one element in this array of…
columnOctetString.1.3.6.1.4.1.6296.9.5.1.1.4.1.28
dsAdslAtucPhysExtnDeltQLNMTus
DELT-related parameter that provides the number of symbols used to measure the upstream QLN(f) values. (Not available for ADSL and ADSL2plus).
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6296.9.5.1.1.4.1.29
dsAdslAtucPhysExtnBertError
This object indicates the No. of bit errors detected during BERT.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6296.9.5.1.1.4.1.3
dsAdslAtucPhysExtnDeltQLNpsus
DELT-related parameter that provides an array of real upstream QLN(f) values in dB. (Not available for ADSL and ADSL2plus). Every two octets refer to one element in this array of …
columnOctetString.1.3.6.1.4.1.6296.9.5.1.1.4.1.30
dsAdslAtucPhysExtnDeltLastTxState
DELT-related parameter that provides last successful transmitted initialization state by the ATU-C. (Not available for ADSL and ADSL2plus).
columnEnumeration.1.3.6.1.4.1.6296.9.5.1.1.4.1.31
dsAdslAtucPhysExtnPMState
Line Power Management State. (Not available for ADSL).
columnEnumeration.1.3.6.1.4.1.6296.9.5.1.1.4.1.32
dsAdslAtucPhysExtnChanPerfCU
The near-end user total cell count performance parameter is a count of the total number of cells in the ATM Data Path delivered at the V-C (for ATU-C) or T-R (for ATU-R) interface…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6296.9.5.1.1.4.1.33
dsAdslAtucPhysExtnChipVersion
GlobespanVirata parameter that indicates the DSP version number.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6296.9.5.1.1.4.1.35
dsAdslAtucPhysExtnPilotTone
GlobespanVirata parameter that indicates the Pilot Tone Index.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6296.9.5.1.1.4.1.36
dsAdslAtucMSGds
Indicates the Overhead Channel. This feature is not supported by DSLPHY as yet.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.6296.9.5.1.1.4.1.37
dsAdslAtucPhysExtnPsdMaskMode
GlobespanVirata parameter that indicates the actual Psd Mask currently being used.
columnEnumeration.1.3.6.1.4.1.6296.9.5.1.1.4.1.38
dsAdslAtucPhysExtnTxAtmCellCounter
This object Provides transmit ATM cell counter.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.6296.9.5.1.1.4.1.4
dsAdslAtucPhysExtnRxAtmCellCounter
This object Provides receive ATM cell counter.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6296.9.5.1.1.4.1.5
dsAdslAtucPhysExtnStartProgress
This object provides current detailed start up information to be used for debugging.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6296.9.5.1.1.4.1.6
dsAdslAtucPhysExtnIdleBertError
Number of bit errors.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6296.9.5.1.1.4.1.7
dsAdslAtucPhysExtnIdleBertCells
Number of idle cells.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6296.9.5.1.1.4.1.8
dsAdslAtucPhysExtnBertSync
Indicates if the Signal is in Sync or not.
columnEnumeration.1.3.6.1.4.1.6296.9.5.1.1.4.1.9