CISCO-XGCP-EXT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
53

cxeCallCtrlConfigTable

table
.1.3.6.1.4.1.9.9.325.1.1.1 · 1 row entry · 22 columns
Open in standard view 
This table contains objects used for configuring general 
parameters in call control default to the local media gateway
in xGCP protocols.
cxeCallCtrlConfigEntry entry .1.3.6.1.4.1.9.9.325.1.1.1.1
There is one entry for each media gateway.
The entry will be automatically generated when a media
gateway is detected.
Indexes
Column Syntax OID
cxeCallCtrlControlServiceType
This object identifies Type Of Service (TOS) field of
IP header for the control packet in VoIP application.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.325.1.1.1.1.1
cxeCallCtrlBearerServiceType
This object identifies Type Of Service (TOS) field
of IP header for the voice payload packet in VoIP
application.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.325.1.1.1.1.2
cxeCallCtrlVoIpDtmfRelayMode
This object defines whether the DTMF (Dual Tone,
Multi-Frequency) digits need to be transported to the other
endpoint via NSE packets in Voice Over IP.

The value of this object will be utilized when the …
DtmfRelayModer/w
Textual Convention: DtmfRelayMode Enumeration
Type Values:
1dtmfRelayDisabled
2dtmfRelayCisco
3dtmfRelayNse
4dtmfRelayOutOfBand
5dtmfRelayNteGw
6dtmfRelayNteCa
7dtmfRelayInband
8dtmfRelayType3
 .1.3.6.1.4.1.9.9.325.1.1.1.1.3
cxeCallCtrlVoIpDtmfCodec
This object identifies DTMF relay codec for VoIP.
This object is not applicable if cxeCallCtrlVoIpDtmfRelay
is DtmfRelayDisabled.
DtmfCodecTyper/w
Textual Convention: DtmfCodecType Enumeration
Type Values:
1dtmfCodecAll
2dtmfCodecLowRate
 .1.3.6.1.4.1.9.9.325.1.1.1.1.4
cxeCallCtrlVoAal2DtmfRelayMode
This object defines whether the DTMF (Dual Tone,
Multi-Frequency) digits need to be transported to the other
endpoint in Voice over AAL2 packets.

The value of this object will be utilized when the call
a…
DtmfRelayModer/w
Textual Convention: DtmfRelayMode Enumeration
Type Values:
1dtmfRelayDisabled
2dtmfRelayCisco
3dtmfRelayNse
4dtmfRelayOutOfBand
5dtmfRelayNteGw
6dtmfRelayNteCa
7dtmfRelayInband
8dtmfRelayType3
 .1.3.6.1.4.1.9.9.325.1.1.1.1.5
cxeCallCtrlVoAal2DtmfCodec
This object identifies DTMF relay CODEC for Voice over AAL2.
This object is not applicable if cxeCallCtrlVoAal2DtmfRelay
is DtmfRelayDisabled.
DtmfCodecTyper/w
Textual Convention: DtmfCodecType Enumeration
Type Values:
1dtmfCodecAll
2dtmfCodecLowRate
 .1.3.6.1.4.1.9.9.325.1.1.1.1.6
cxeCallCtrlTsePayload
This object identifies TSE (Telephony Signaling
Events) payload type.
Integer32r/w
Constraints:
range: 0-200
 .1.3.6.1.4.1.9.9.325.1.1.1.1.7
cxeCallCtrlNetNseTimer
This object identifies Network Signaling Event (NSE)
timeout value.
millisecondsInteger32r/w
Constraints:
range: 250-10000
 .1.3.6.1.4.1.9.9.325.1.1.1.1.8
cxeCallCtrlRtcpRcvTimer
This object identifies the number of times of Real Time
Control Transport (RTCP) report interval if the media
gateway has not recieved any RTCP packets from another
side.

The media gateway will mark anot…
timesInteger32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.9.9.325.1.1.1.1.9
cxeCallCtrlIgnoreAal2LcoCodec
This object defines whether to ignore the AAL2 Local
Connection Option (LCO) message from the call agent
or not.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.325.1.1.1.1.10
cxeCallCtrlDigitMapOrder
This object defines the type of digit map order.
The MGC can advise and load the gateway with a digit map
that correspond to the dial plan to collect the access
codes, credit card numbers and other numbers requested
…
Enumerationr/w
Enumerated Values:
1dmOrderShortest
2dmOrderOrdered
 .1.3.6.1.4.1.9.9.325.1.1.1.1.11
cxeCallCtrlT38Inhibited
This object defines whether T.38 is inhibited in the
media gateway or not.

T.38 is a Fax Relay Protocol defined by ITU for
real-time protocol for Fax over IP networks.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.325.1.1.1.1.12
cxeCallCtrlT38NseRspTimer
This object defines a timeout value for a timer.
This timer is started after sending a NSE 200
while waiting for the NSE 201 acknowledgement or
NSE 202 negative acknowledgement. Expiration of the
timer will indicate …
millisecondsInteger32r/w
Constraints:
range: 250-10000
 .1.3.6.1.4.1.9.9.325.1.1.1.1.13
cxeCallCtrlT38FecEnabled
This object is used to enable the Forward Error
Correction (FEC) for UDP-based fax transport.

This object is not applicable if cxeCallCtrlT38Inhibited
is set to 'true'.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.325.1.1.1.1.14
cxeCallCtrlT38LsRedundancy
This object determines the extent of the Internet Fax
Protocol (IFP) packet transmission redundancy for
the low-speed control information exchanged during
the first phase of a T.38 fax relay connection.
…
Integer32r/w
Constraints:
range: 0-5
 .1.3.6.1.4.1.9.9.325.1.1.1.1.15
cxeCallCtrlT38HsRedundancy
This object determines the extent of the Internet Fax
Protocol (IFP) packet transmission redundancy for
the high-speed control and image information
exchanged following the initial low-speed phase of
a T.38 fax relay…
Integer32r/w
Constraints:
range: 0-2
 .1.3.6.1.4.1.9.9.325.1.1.1.1.16
cxeCallCtrlT38NsfCountryCode
This object specifies the country code for identifying
the country where the media gateway with non-standard
capabilities was manufactured.

This object is not applicable if cxeCallCtrlT38Inhibited
is se…
CISCO-TCCountryCodeITUr/w
Textual Convention: CISCO-TCCountryCodeITU Unsigned32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.325.1.1.1.1.17
cxeCallCtrlT38NsfVendorCode
Per its definition (ITU T.35), the Vendor Code (also
called the Terminal Provider Code) in the Non-Standard
Facilities (NSF) code is a two-byte field identifying the
manufacturer of the media gateway with non-standard
…
CxeTerminalProviderCoder/w
Textual Convention: CxeTerminalProviderCode OctetString
Type Constraints:
range: 0
range: 2
 .1.3.6.1.4.1.9.9.325.1.1.1.1.18
cxeCallCtrlVselDselFselSupport
This object is used to enable or disable VSEL, DSEL and
FSEL support.

VSEL: Voice codec, packet length and packet times Selection
DSEL: Data codec, packet length and packet times Selection
FSEL: Fax co…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.325.1.1.1.1.19
cxeCallCtrlDefaultBearTraffic
This object specifies the combination of the network
type (IP/ATM), virtual circuit type (PVC/SVC) and
ATM adaptation layer type (AAL1/AAL2/AAL5) for the
connection used in transporting bearer traffic.

…
Enumerationr/w
Enumerated Values:
1ipPvcAal5
2atmPvcAal2
3atmSvcAal2
4atmSvcAal1
 .1.3.6.1.4.1.9.9.325.1.1.1.1.20
cxeCallCtrlLastFailedMgcAddrType
This object indicates the address type, either IPv4 or
IPv6, of cxeCallCtrlLastFailedMgcAddress.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.325.1.1.1.1.21
cxeCallCtrlLastFailedMgcAddress
This object indicates the address of MGC (Media Gateway
Controller) with which the media gateway had tried to
communicate lastly but failed.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.325.1.1.1.1.22

cxeCallCtrlProfileTable

table
.1.3.6.1.4.1.9.9.325.1.1.2 · 1 row entry · 31 columns
Open in standard view 
This table defines the call control profiles.
          
A call control profile contains the call control information 
that a call agent uses to establish a call. In the call 
control profile, it has the following configurations:
(1) The information of call agent, such as its address, 
    connecting port, service type and version.
(2) The maximum retry parameters in the message exchange 
    between the call agent and the media gateway.
(3) The timeout settings in the call control.
          
A call control profile can be associated with a voice
interface (DS0 group in TDM side), so all the calls set up
in the voice interface will use the call control 
parameters from the profile. 
          
A call control profile can be associated with a Media Gateway
Controller(MGC)/call agent redundant group (cMgcGrpParamTable
defined in CISCO-MGC-MIB). In this case, the call agent 
information for the profile will be determined by the MGC 
redundant group.
cxeCallCtrlProfileEntry entry .1.3.6.1.4.1.9.9.325.1.1.2.1
Each entry describes an instance of a call control
profile in the media gateway.

When an entry of call control profile is added to the table,
the following object must be provided:

cxeCcPr…
Indexes
CISCO-MEDIA-GATEWAY-MIBcmgwIndex cxeCcProfileIndex
Column Syntax OID
cxeCcProfileIndex
This object uniquely identifies the call control profile.
CISCO-MEDIA-GATEWAY-MIBCCallControlProfileIndex
Textual Convention: CISCO-MEDIA-GATEWAY-MIBCCallControlProfileIndex Unsigned32
Type Constraints:
range: 1..65535
 .1.3.6.1.4.1.9.9.325.1.1.2.1.1
cxeCcProfileName
A unique name for the profile. The name of the profile
has to be unique among all entries of the table.

This object is mandatory during the creation of the entry.

This object can not be mod…
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.9.9.325.1.1.2.1.2
cxeCcProfileNumVifs
This object reprsents the total number of voice interface
(DS0 group) associated with this call control profile.

The value of '0' means there is no voice interfaces
associated with the profile.
…
Integer32
Constraints:
range: 0-1000
 .1.3.6.1.4.1.9.9.325.1.1.2.1.3
cxeCcProfileMgcGrpNum
This object indicates which MGC Redundant group number
that the call control profile will be used.
The value is the index to MGC Redundant Group Table
(cMgcGrpParamTable).

There are two conditions for as…
Integer32r/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.9.9.325.1.1.2.1.4
cxeCcProfileMgcAddrType
This object identifies the address type applicable to
cxeCcProfileMgcAddress.
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.9.9.325.1.1.2.1.5
cxeCcProfileMgcAddress
This object specifies the address of Media Gateway
Controller (MGC) configured in the profile.

When cxeCcProfileMgcGrpNum is non-zero (which menas
using MGC group), this object can not be set.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.325.1.1.2.1.6
cxeCcProfileProtocolIdx
This object specifies the protocol that the media gateway
should communicate with MGC during call setup.

It is the index of the protocol table(cMediaGwProtocolTable).

If cxeCcProfileMgcGrpN…
Integer32r/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.9.9.325.1.1.2.1.7
cxeCcProfileXgcpRetryMethod
This object specifies the command/response retry method
when the media gateway communicates with the MGC in
xGCP protocols.
CISCO-XGCP-MIBCXgcpRetryMethodr/w
Textual Convention: CISCO-XGCP-MIBCXgcpRetryMethod Enumeration
Type Values:
1neverResetTimer
2resetTimerForNewMgc
3resetTimerForNewAddr
4resetTimerForEndpoint
 .1.3.6.1.4.1.9.9.325.1.1.2.1.8
cxeCcProfileRetryMax1
This object contains the suspicious error threshold for
signaling messages.
Integer32r/w
Constraints:
range: 1-20
 .1.3.6.1.4.1.9.9.325.1.1.2.1.9
cxeCcProfileDnsLookupMax1
This object enables/disables the Max1 Domain Name Server
(DNS) query operation when Max1 expires.
This object is used when a gateway-initiated message is not
acknowledged by the MGC. If the object is 'true', a DNS
query…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.325.1.1.2.1.10
cxeCcProfileRetryMax2
This object contains the disconnect error threshold
for signaling messages.
Integer32r/w
Constraints:
range: 1-20
 .1.3.6.1.4.1.9.9.325.1.1.2.1.11
cxeCcProfileDnsLookupMax2
This object enables/disables the Max2 Domain Name Server
(DNS) query operation when Max2 expires.

This object is used when a gateway-initiated message is not
acknowledged by the MGC. If the object is 'tru…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.325.1.1.2.1.12
cxeCcProfileMwiTimeout
The timeout value for the message waiting indicator tone.
Message Waiting Indicator (MWI) tone is used with message
waiting services, it indicates that the media gateway
is ready to accept address information or other …
millisecondsInteger32r/w
Constraints:
range: 1-50
 .1.3.6.1.4.1.9.9.325.1.1.2.1.13
cxeCcProfileTsmaxTimeout
The timeout value for retransmission removal.
The gateway uses the value of this object to determine how
long for the MGCP messages stored in the retransmission
queue before they are discarded.
secondsInteger32r/w
Constraints:
range: 1-1000
 .1.3.6.1.4.1.9.9.325.1.1.2.1.14
cxeCcProfileTdinitTimeout
The voice interface (DS0 group) becomes disconnected when
the media gateway tries to communicate with the call agent
and the retransmission procedure times out after retrying.

The voice interface (DS0 …
secondsInteger32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.9.9.325.1.1.2.1.15
cxeCcProfileTdminTimeout
The DS0 group (voice interface) becomes disconnected
when it tries to communicate with the call agent and the
retransmission procedure times out after retrying.

The DS0 group (voice interface ) in disc…
secondsInteger32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.9.9.325.1.1.2.1.17
cxeCcProfileTdmaxTimeout
The maximum waiting delay (Tdmax) timeout value used by the
media gateway to send the Restart In Progress with the
restart method as RM:disconnected to the call agent when
the voice interface associated ds0-group disco…
secondsInteger32r/w
Constraints:
range: 1-1000
 .1.3.6.1.4.1.9.9.325.1.1.2.1.18
cxeCcProfileTcritTimeout
This object represents the timeout value for the critical
timer.

If used along with a digit map, the timer is started when
the last digit is received. i.e and when no more digits
are required for a digit…
secondsInteger32r/w
Constraints:
range: 1-1000
 .1.3.6.1.4.1.9.9.325.1.1.2.1.19
cxeCcProfileTparTimeout
This object represents the partial dial timeout
and is used along with a digit map as the inter-digit
timer.
This object is used by call processing when it processes
mid-call DTMF digit reporting.

The …
secondsInteger32r/w
Constraints:
range: 1-1000
 .1.3.6.1.4.1.9.9.325.1.1.2.1.20
cxeCcProfileThistTimeout
The MGCP protocol is organized as set of transactions, each
of which is composed of a command and a resonse. The MGCP
messages, being carried over UDP, may be subject to losses.
In the absence of a timely response, comm…
secondsInteger32r/w
Constraints:
range: 1-1000
 .1.3.6.1.4.1.9.9.325.1.1.2.1.21
cxeCcProfileRtTimeout
This object specifies time for which the local ring back
tone (towards the TDM) will be generated unless
interrupted (e.g., by the answer from the called party
or a delete connection command from the Call Agent).
…
secondsInteger32r/w
Constraints:
range: 0-3600
 .1.3.6.1.4.1.9.9.325.1.1.2.1.22
cxeCcProfileRbkTimeout
This object specifies time for which the remote ring
back tone (towards the packet network) will be
generated unless interrupted (e.g., by the answer
from the called party or a delete connection command
from the Cal…
secondsInteger32r/w
Constraints:
range: 0-3600
 .1.3.6.1.4.1.9.9.325.1.1.2.1.23
cxeCcProfileCgTimeout
This object specifies time for network congestion
tone will be generated.

The network congestion tone will be generated when
the network resources or bandwidth exceed their
threholds.

Th…
secondsInteger32r/w
Constraints:
range: 0-3600
 .1.3.6.1.4.1.9.9.325.1.1.2.1.24
cxeCcProfileBzTimeout
This object specifies time for which the busy tone
will be generated unless interrupted (e.g., by the
hangup from the calling party).

The value of '0' indicates that the tone will be
generated indefin…
secondsInteger32r/w
Constraints:
range: 0-3600
 .1.3.6.1.4.1.9.9.325.1.1.2.1.25
cxeCcProfileDlTimeout
This object specifies time for which the dial tone
will be generated unless interrupted (e.g., by the
first DTMF digit from the calling party).

The value of '0' indicates that the tone will be
generat…
secondsInteger32r/w
Constraints:
range: 0-3600
 .1.3.6.1.4.1.9.9.325.1.1.2.1.26
cxeCcProfileSlTimeout
This object specifies time for which the stutter
dial tone or confirmation dial tone will be
generated unless interrupted (e.g., by the first
DTMF digit from the calling party).

The value of '0' indic…
secondsInteger32r/w
Constraints:
range: 0-3600
 .1.3.6.1.4.1.9.9.325.1.1.2.1.27
cxeCcProfileRgTimeout
This object specifies time for which the ringing
cadence will be generated towards the basic PBX
unless interrupted (e.g., by the answer from the
called party or a delete connection command from
the Call Agent).
…
secondsInteger32r/w
Constraints:
range: 0-3600
 .1.3.6.1.4.1.9.9.325.1.1.2.1.28
cxeCcProfileRoTimeout
This object specifies time for which the reorder
tone or fast busy tone will be generated unless
interrupted (e.g., by the hangup from the called party).

The value of '0' indicates that the cadence will …
secondsInteger32r/w
Constraints:
range: 0-3600
 .1.3.6.1.4.1.9.9.325.1.1.2.1.29
cxeCcProfileCot1Timeout
This object specifies time for which the continuity
test tone 1 will be generated unless interrupted.

The value of '0' indicates that the cadence will be
generated indefinitely unless interrupted.
secondsInteger32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.9.9.325.1.1.2.1.30
cxeCcProfileCot2Timeout
This object specifies time for which the continuity
test tone 2 will be generated unless interrupted.

The value of '0' indicates that the cadence will be
generated indefinitely unless interrupted.
secondsInteger32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.9.9.325.1.1.2.1.31
cxeCcProfileRowStatus
This object is used by users for adding/deleting an
entry from the table.

The entry can't be deleted if the value of
cxeCcProfileNumVifs is greater than zero or
the value of cxeCcProfileMgcGrpNum is gr…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.9.325.1.1.2.1.32