cxeCcProfileProtocolIdx
CISCO-XGCP-EXT-MIB ·
.1.3.6.1.4.1.9.9.325.1.1.2.1.7
Object
column
r/w
Integer32
This object specifies the protocol that the media gateway
should communicate with MGC during call setup.
It is the index of the protocol table(cMediaGwProtocolTable).
If cxeCcProfileMgcGrpNum is non-zero, the value of this object
will be ignored. The protocol will be determined by the
MGC group.
Context
- MIB
- CISCO-XGCP-EXT-MIB
- OID
.1.3.6.1.4.1.9.9.325.1.1.2.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cxeCallCtrlProfileEntry
- Table
- cxeCallCtrlProfileTable
- Siblings
- 30
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-32
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cxeCcProfileIndex This object uniquely identifies the call control profile. | column | CISCO-MEDIA-GATEWAY-MIBCCallControlProfileIndex | .1.3.6.1.4.1.9.9.325.1.1.2.1.1 |
| cxeCcProfileDnsLookupMax1 This object enables/disables the Max1 Domain Name Server
(DNS) query operation when Max1 expires.
This object is used when a gateway-initiated message is not
acknowledged by the M… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.325.1.1.2.1.10 |
| cxeCcProfileRetryMax2 This object contains the disconnect error threshold
for signaling messages. | column | Integer32 | .1.3.6.1.4.1.9.9.325.1.1.2.1.11 |
| cxeCcProfileDnsLookupMax2 This object enables/disables the Max2 Domain Name Server
(DNS) query operation when Max2 expires.
This object is used when a gateway-initiated message is not
acknow… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.325.1.1.2.1.12 |
| cxeCcProfileMwiTimeout The timeout value for the message waiting indicator tone.
Message Waiting Indicator (MWI) tone is used with message
waiting services, it indicates that the media gateway
is ready… | column | milliseconds Integer32 | .1.3.6.1.4.1.9.9.325.1.1.2.1.13 |
| cxeCcProfileTsmaxTimeout The timeout value for retransmission removal.
The gateway uses the value of this object to determine how
long for the MGCP messages stored in the retransmission
queue before th… | column | seconds Integer32 | .1.3.6.1.4.1.9.9.325.1.1.2.1.14 |
| cxeCcProfileTdinitTimeout The voice interface (DS0 group) becomes disconnected when
the media gateway tries to communicate with the call agent
and the retransmission procedure times out after retrying.
… | column | seconds Integer32 | .1.3.6.1.4.1.9.9.325.1.1.2.1.15 |
| cxeCcProfileTdminTimeout The DS0 group (voice interface) becomes disconnected
when it tries to communicate with the call agent and the
retransmission procedure times out after retrying.
… | column | seconds Integer32 | .1.3.6.1.4.1.9.9.325.1.1.2.1.17 |
| cxeCcProfileTdmaxTimeout The maximum waiting delay (Tdmax) timeout value used by the
media gateway to send the Restart In Progress with the
restart method as RM:disconnected to the call agent when
the vo… | column | seconds Integer32 | .1.3.6.1.4.1.9.9.325.1.1.2.1.18 |
| cxeCcProfileTcritTimeout This object represents the timeout value for the critical
timer.
If used along with a digit map, the timer is started when
the last digit is received. i.e and when… | column | seconds Integer32 | .1.3.6.1.4.1.9.9.325.1.1.2.1.19 |
| cxeCcProfileName A unique name for the profile. The name of the profile
has to be unique among all entries of the table.
This object is mandatory during the creation of the entry.
… | column | OctetString | .1.3.6.1.4.1.9.9.325.1.1.2.1.2 |
| cxeCcProfileTparTimeout This object represents the partial dial timeout
and is used along with a digit map as the inter-digit
timer.
This object is used by call processing when it processes
mid-call D… | column | seconds Integer32 | .1.3.6.1.4.1.9.9.325.1.1.2.1.20 |
| cxeCcProfileThistTimeout The MGCP protocol is organized as set of transactions, each
of which is composed of a command and a resonse. The MGCP
messages, being carried over UDP, may be subject to losses.
I… | column | seconds Integer32 | .1.3.6.1.4.1.9.9.325.1.1.2.1.21 |
| cxeCcProfileRtTimeout This object specifies time for which the local ring back
tone (towards the TDM) will be generated unless
interrupted (e.g., by the answer from the called party
or a delete conne… | column | seconds Integer32 | .1.3.6.1.4.1.9.9.325.1.1.2.1.22 |
| cxeCcProfileRbkTimeout This object specifies time for which the remote ring
back tone (towards the packet network) will be
generated unless interrupted (e.g., by the answer
from the called party or a… | column | seconds Integer32 | .1.3.6.1.4.1.9.9.325.1.1.2.1.23 |
| cxeCcProfileCgTimeout This object specifies time for network congestion
tone will be generated.
The network congestion tone will be generated when
the network resources or bandwidth ex… | column | seconds Integer32 | .1.3.6.1.4.1.9.9.325.1.1.2.1.24 |
| cxeCcProfileBzTimeout This object specifies time for which the busy tone
will be generated unless interrupted (e.g., by the
hangup from the calling party).
The value of '0' indicates … | column | seconds Integer32 | .1.3.6.1.4.1.9.9.325.1.1.2.1.25 |
| cxeCcProfileDlTimeout This object specifies time for which the dial tone
will be generated unless interrupted (e.g., by the
first DTMF digit from the calling party).
The value of '0' … | column | seconds Integer32 | .1.3.6.1.4.1.9.9.325.1.1.2.1.26 |
| cxeCcProfileSlTimeout This object specifies time for which the stutter
dial tone or confirmation dial tone will be
generated unless interrupted (e.g., by the first
DTMF digit from the calling party)… | column | seconds Integer32 | .1.3.6.1.4.1.9.9.325.1.1.2.1.27 |
| cxeCcProfileRgTimeout This object specifies time for which the ringing
cadence will be generated towards the basic PBX
unless interrupted (e.g., by the answer from the
called party or a delete conne… | column | seconds Integer32 | .1.3.6.1.4.1.9.9.325.1.1.2.1.28 |
| cxeCcProfileRoTimeout This object specifies time for which the reorder
tone or fast busy tone will be generated unless
interrupted (e.g., by the hangup from the called party).
The value… | column | seconds Integer32 | .1.3.6.1.4.1.9.9.325.1.1.2.1.29 |
| cxeCcProfileNumVifs This object reprsents the total number of voice interface
(DS0 group) associated with this call control profile.
The value of '0' means there is no voice interface… | column | Integer32 | .1.3.6.1.4.1.9.9.325.1.1.2.1.3 |
| cxeCcProfileCot1Timeout This object specifies time for which the continuity
test tone 1 will be generated unless interrupted.
The value of '0' indicates that the cadence will be
generat… | column | seconds Integer32 | .1.3.6.1.4.1.9.9.325.1.1.2.1.30 |
| cxeCcProfileCot2Timeout This object specifies time for which the continuity
test tone 2 will be generated unless interrupted.
The value of '0' indicates that the cadence will be
generat… | column | seconds Integer32 | .1.3.6.1.4.1.9.9.325.1.1.2.1.31 |
| cxeCcProfileRowStatus This object is used by users for adding/deleting an
entry from the table.
The entry can't be deleted if the value of
cxeCcProfileNumVifs is greater than zero or
… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.325.1.1.2.1.32 |
| cxeCcProfileMgcGrpNum This object indicates which MGC Redundant group number
that the call control profile will be used.
The value is the index to MGC Redundant Group Table
(cMgcGrpParamTable).
… | column | Integer32 | .1.3.6.1.4.1.9.9.325.1.1.2.1.4 |
| cxeCcProfileMgcAddrType This object identifies the address type applicable to
cxeCcProfileMgcAddress. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.325.1.1.2.1.5 |
| cxeCcProfileMgcAddress This object specifies the address of Media Gateway
Controller (MGC) configured in the profile.
When cxeCcProfileMgcGrpNum is non-zero (which menas
using MGC group… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.325.1.1.2.1.6 |
| cxeCcProfileXgcpRetryMethod This object specifies the command/response retry method
when the media gateway communicates with the MGC in
xGCP protocols. | column | CISCO-XGCP-MIBCXgcpRetryMethod | .1.3.6.1.4.1.9.9.325.1.1.2.1.8 |
| cxeCcProfileRetryMax1 This object contains the suspicious error threshold for
signaling messages. | column | Integer32 | .1.3.6.1.4.1.9.9.325.1.1.2.1.9 |