CISCO-WIRELESS-P2MP-RF-METRICS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

p2mpHistCtrlTable

table

.1.3.6.1.4.1.9.9.180.1.1 · 1 row entry · 14 columns

Open in standard view

This table contains information about histograms configured in
hardware.

p2mpHistCtrlEntry entry .1.3.6.1.4.1.9.9.180.1.1.1

This represents one entry in the p2mpHistCtrlTable. This table
is indexed by ifIndex, p2mpHistSuMacAddress, and p2mpHistClass.

At the head end:
Histograms can be created on each upstream channel either on …

Indexes

IF-MIBifIndex p2mpHistSuMacAddress p2mpHistClass

Column Syntax OID

p2mpHistSuMacAddress

This object is used to index this table.
At the head end:
When a histogram is created on a per subscriber unit basis,
this object should reflect the MAC address of the subscriber
unit.
When a histogram is cr…

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.9.9.180.1.1.1.1

p2mpHistClass

This objects used to index this table. It represents the
attribute that is being histogrammed.

CISCO-WIRELESS-TC-MIBP2mpRadioSignalAttribute

Textual Convention: CISCO-WIRELESS-TC-MIBP2mpRadioSignalAttribute Enumeration

Type Values:

0	none
1	rsaSinrMainAnt
2	rsaSinrDiversityAnt
3	rsaSinrRatio
4	rsaTimingOffset
5	rsaRxPowerMainAnt
6	rsaRxPowerDiversityAnt
7	rsaChDelaySpreadMainAnt
8	rsaChDelaySpreadDiversityAnt
9	rsaHeAmbientNoise
10	rsaSuRxPowerDeltaMainAnt
11	rsaSuRxPowerDeltaDiversityAnt
12	rsaSuTotalTxPower

.1.3.6.1.4.1.9.9.180.1.1.1.2

p2mpHistSize

This object lets the user select the granularity of the
histogram. The number of bins used for the capture in
each category is hardware dependent.

Enumerationr/w

Enumerated Values:

1	fine
2	coarse

.1.3.6.1.4.1.9.9.180.1.1.1.3

p2mpHistSumScale

This variable indicates the exponent to apply to the
fixed-point values in the histogram summary table.

CISCO-WIRELESS-TC-MIBCwrFixedPointScale

Textual Convention: CISCO-WIRELESS-TC-MIBCwrFixedPointScale Enumeration

Type Values:

1	yocto
2	zepto
3	atto
4	femto
5	pico
6	nano
7	micro
8	milli
9	units
10	kilo
11	mega
12	giga
13	tera
14	exa
15	peta
16	zetta
17	yotta

.1.3.6.1.4.1.9.9.180.1.1.1.4

p2mpHistSumPrecision

This variable indicates the number of decimal places used for
precision when interpreting the fixed-point values in the
histogram summary table.

CISCO-WIRELESS-TC-MIBCwrFixedPointPrecision

Textual Convention: CISCO-WIRELESS-TC-MIBCwrFixedPointPrecision Integer32

Type Constraints:
range: 0..9

.1.3.6.1.4.1.9.9.180.1.1.1.5

p2mpStartBinValue

This object represents the maximum of the values that will be
collected in the first bin of the histogram.
All values <= p2mpStartBinValue are kept in the first histogram
bin.

Integer32r/w

Constraints:
range: -2147483647-2147483647

.1.3.6.1.4.1.9.9.180.1.1.1.6

p2mpEndBinValue

This object represents the minimum of the values that will be
collected in the last bin of the histogram.
All values >= p2mpEndBinValue are kept in the last histogram
bin.

Integer32r/w

Constraints:
range: -2147483647-2147483647

.1.3.6.1.4.1.9.9.180.1.1.1.7

p2mpCollDuration

This object specifies the duration for which this histogram
must be accumulated. After successfully accumulating data for
this amount of time the collection stops and the p2mpHistStatus
changes to statusCaptured.

secondsCISCO-WIRELESS-TC-MIBCwrUpdateTimer/w

Textual Convention: CISCO-WIRELESS-TC-MIBCwrUpdateTime Integer32

Type Constraints:
range: 0..2147483647

.1.3.6.1.4.1.9.9.180.1.1.1.8

p2mpUpdateRate

This object represents rate at which snapshots of the histogram
will be available.

secondsCISCO-WIRELESS-TC-MIBCwrUpdateTimer/w

Textual Convention: CISCO-WIRELESS-TC-MIBCwrUpdateTime Integer32

Type Constraints:
range: 0..2147483647

.1.3.6.1.4.1.9.9.180.1.1.1.9

p2mpPeriodicSum

The histogram data is updated every p2mpUpdateRate seconds.
When set to true(1), the latest histogram data set is summed
with the previous histogram data set and the
p2mpHistSummaryTable will reflect cumulative values.
…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.180.1.1.1.10

p2mpHistOwner

This object identifies management station that created this
histogram specification.

IF-MIBOwnerStringr/w

Textual Convention: IF-MIBOwnerString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.180.1.1.1.11

p2mpHistAction

This object represents the action to be carried out on this
histogram specification. If a histogram has been successfully
captured then it must be cleared before an other capture
may be initiated.

CISCO-WIRELESS-TC-MIBCwrCollectionActionr/w

Textual Convention: CISCO-WIRELESS-TC-MIBCwrCollectionAction Enumeration

Type Values:

1	actionStop
2	actionStart
3	actionClear
4	actionRestart

.1.3.6.1.4.1.9.9.180.1.1.1.12

p2mpHistStatus

This object represents the current state of this histogram.
Once the histogram collection is complete the status changes to
statusCaptured and the data is available for use.
None of the parameters of a histogram specif…

CISCO-WIRELESS-TC-MIBCwrCollectionStatus

Textual Convention: CISCO-WIRELESS-TC-MIBCwrCollectionStatus Enumeration

Type Values:

1	statusIdle
2	statusInProgress
3	statusStopped
4	statusCaptured

.1.3.6.1.4.1.9.9.180.1.1.1.13

p2mpHistRowStatus

This object may be used to create or delete a histogram control
specification.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.9.9.180.1.1.1.14

p2mpHistSummaryTable

table

.1.3.6.1.4.1.9.9.180.1.2 · 1 row entry · 4 columns

Open in standard view

This table contains histogram Summary collected based on the
specifications in the p2mpHistCtrlTable.

p2mpHistSummaryEntry entry .1.3.6.1.4.1.9.9.180.1.2.1

This represents one entry in the p2mpHistSummaryTable.

At the head end:
When viewing the summary of a histogram that was created for a
specific subscriber unit, the user must specify the subscriber
unit's…

Indexes

IF-MIBifIndex p2mpHistSuMacAddress p2mpHistClass

Column	Syntax	OID
p2mpHistUpdateTime This object represents the sysUpTime when this histogram was retrieved from hardware.	secondsCISCO-WIRELESS-TC-MIBCwrUpdateTime Textual Convention: CISCO-WIRELESS-TC-MIBCwrUpdateTime `Integer32` Type Constraints: `range: 0..2147483647`	`.1.3.6.1.4.1.9.9.180.1.2.1.1`
p2mpHistMin This object represents minimum value seen in this histogram.	CISCO-WIRELESS-TC-MIBCwrFixedPointValue Textual Convention: CISCO-WIRELESS-TC-MIBCwrFixedPointValue `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.9.9.180.1.2.1.2`
p2mpHistMax This object represents maximum value seen in this histogram.	CISCO-WIRELESS-TC-MIBCwrFixedPointValue Textual Convention: CISCO-WIRELESS-TC-MIBCwrFixedPointValue `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.9.9.180.1.2.1.3`
p2mpHistMean This object represents mean of the values in this histogram.	CISCO-WIRELESS-TC-MIBCwrFixedPointValue Textual Convention: CISCO-WIRELESS-TC-MIBCwrFixedPointValue `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.9.9.180.1.2.1.4`

p2mpHistDataTable

table

.1.3.6.1.4.1.9.9.180.1.3 · 1 row entry · 2 columns

Open in standard view

This table contains histogram values collected based on the
specifications in the p2mpHistCtrlTable.

p2mpHistDataEntry entry .1.3.6.1.4.1.9.9.180.1.3.1

This represents one entry in the p2mpHistDataTable.

At the head end:
When viewing the data of a histogram that was created for a
specific subscriber unit, the user must specify the subscriber
unit's MAC …

Indexes

IF-MIBifIndex p2mpHistSuMacAddress p2mpHistClass p2mpHistBinIndex

Column	Syntax	OID
p2mpHistBinIndex This object represents the histogram bin number for the value in p2mpValue.	Integer32 Constraints: `range: 1-50`	`.1.3.6.1.4.1.9.9.180.1.3.1.1`
p2mpValue This object represents the value in the histogram bin p2mpHistBinIndex.	Integer32 Constraints: `range: 0-2147483647`	`.1.3.6.1.4.1.9.9.180.1.3.1.2`

p2mpTlCtrlTable

table

.1.3.6.1.4.1.9.9.180.2.1 · 1 row entry · 13 columns

Open in standard view

This table contains information about timelines configured in
hardware. When radio signal data is collected it will be stored 
in a buffer of size p2mpTlNumDataValues which may be later 
retrieved.

p2mpTlCtrlEntry entry .1.3.6.1.4.1.9.9.180.2.1.1

This represents one entry in the p2mpTlCtrlTable. This table
is indexed by ifIndex, p2mpTlSuMacAddress, and p2mpTlClass.

At the head end:
Timelines can be created on each upstream channel either on a
per c…

Indexes

IF-MIBifIndex p2mpTlSuMacAddress p2mpTlClass

Column Syntax OID

p2mpTlSuMacAddress

This object is used to index this table.
At the head end:
When a timeline is created on a per subscriber unit basis,
this object should reflect the MAC address of the subscriber
unit.
When a timeline is cre…

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.9.9.180.2.1.1.1

p2mpTlClass

This object represents the attribute for which a timline capture
is requested.
When a timeline is requested p2mpBufSize worth of data will be
captured.

CISCO-WIRELESS-TC-MIBP2mpRadioSignalAttribute

Textual Convention: CISCO-WIRELESS-TC-MIBP2mpRadioSignalAttribute Enumeration

Type Values:

0	none
1	rsaSinrMainAnt
2	rsaSinrDiversityAnt
3	rsaSinrRatio
4	rsaTimingOffset
5	rsaRxPowerMainAnt
6	rsaRxPowerDiversityAnt
7	rsaChDelaySpreadMainAnt
8	rsaChDelaySpreadDiversityAnt
9	rsaHeAmbientNoise
10	rsaSuRxPowerDeltaMainAnt
11	rsaSuRxPowerDeltaDiversityAnt
12	rsaSuTotalTxPower

.1.3.6.1.4.1.9.9.180.2.1.1.2

p2mpTlThreshAttribute

This object, along with p2mpTlThreshType, identifies the
threshold in the p2mpThresholdTable responsible for trigerring
this timeline. When this object's value is none(0), it implies
that there is no threshold associ…

CISCO-WIRELESS-TC-MIBP2mpRadioSignalAttributer/w

Textual Convention: CISCO-WIRELESS-TC-MIBP2mpRadioSignalAttribute Enumeration

Type Values:

0	none
1	rsaSinrMainAnt
2	rsaSinrDiversityAnt
3	rsaSinrRatio
4	rsaTimingOffset
5	rsaRxPowerMainAnt
6	rsaRxPowerDiversityAnt
7	rsaChDelaySpreadMainAnt
8	rsaChDelaySpreadDiversityAnt
9	rsaHeAmbientNoise
10	rsaSuRxPowerDeltaMainAnt
11	rsaSuRxPowerDeltaDiversityAnt
12	rsaSuTotalTxPower

.1.3.6.1.4.1.9.9.180.2.1.1.3

p2mpTlThreshType

This object, along with p2mpTlThreshAttribute, identifies the
threshold in the p2mpThresholdTable responsible for trigerring
this timeline. When this object's value is none(0), it implies
that there is no threshold …

CISCO-WIRELESS-TC-MIBCwrThreshLimitTyper/w

Textual Convention: CISCO-WIRELESS-TC-MIBCwrThreshLimitType Enumeration

Type Values:

1	upChange
2	downChange
3	highThresh
4	lowThresh
5	upLimit
6	lowLimit

.1.3.6.1.4.1.9.9.180.2.1.1.4

p2mpTlNumDataValues

This object indicates the number of data values to be captured
for this timeline. The captured data can be viewed by reading
the p2mpTlDataTable.

number of data valuesInteger32r/w

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.9.9.180.2.1.1.5

p2mpTlDataScale

This variable indicates the exponent to apply to the
fixed-point values in the timeline data table.

CISCO-WIRELESS-TC-MIBCwrFixedPointScale

Textual Convention: CISCO-WIRELESS-TC-MIBCwrFixedPointScale Enumeration

Type Values:

1	yocto
2	zepto
3	atto
4	femto
5	pico
6	nano
7	micro
8	milli
9	units
10	kilo
11	mega
12	giga
13	tera
14	exa
15	peta
16	zetta
17	yotta

.1.3.6.1.4.1.9.9.180.2.1.1.6

p2mpTlDataPrecision

This variable indicates the number of decimal places used for
precision when interpreting the fixed-point values in the
timeline data table.

CISCO-WIRELESS-TC-MIBCwrFixedPointPrecision

Textual Convention: CISCO-WIRELESS-TC-MIBCwrFixedPointPrecision Integer32

Type Constraints:
range: 0..9

.1.3.6.1.4.1.9.9.180.2.1.1.7

p2mpTlSamplePeriod

This lets the user specify the time in milliseconds between
consecutive timeline samples.
The special value of '0' indicates that the timeline will be
sampled on every burst of data. The number of bursts in one
millis…

millisecondsInteger32r/w

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.9.9.180.2.1.1.8

p2mpTlAction

This object represents the action to be carried out on this
timeline specification. If a timeline has been successfully
captured then it must be cleared before another capture
may be initiated.

CISCO-WIRELESS-TC-MIBCwrCollectionActionr/w

Textual Convention: CISCO-WIRELESS-TC-MIBCwrCollectionAction Enumeration

Type Values:

1	actionStop
2	actionStart
3	actionClear
4	actionRestart

.1.3.6.1.4.1.9.9.180.2.1.1.9

p2mpTlPostTrigBufMgmt

Once a trigger fires, this object determines which portion of
the collected data to capture for use. If it is:
preTrigger(1) : Then most of the data collected prior to trigger
is captured.
postTrigger(2…

Enumerationr/w

Enumerated Values:

1	preTrigger
2	postTrigger

.1.3.6.1.4.1.9.9.180.2.1.1.10

p2mpTlOwner

This object identifies the management station that created this
timeline specification.

IF-MIBOwnerStringr/w

Textual Convention: IF-MIBOwnerString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.180.2.1.1.11

p2mpTlStatus

This object represents the current state of this timeline.
Once the timeline collection is complete the status changes to
statusCaptured and the data is available for use.
None of the parameters of a timeline specifica…

CISCO-WIRELESS-TC-MIBCwrCollectionStatus

Textual Convention: CISCO-WIRELESS-TC-MIBCwrCollectionStatus Enumeration

Type Values:

1	statusIdle
2	statusInProgress
3	statusStopped
4	statusCaptured

.1.3.6.1.4.1.9.9.180.2.1.1.12

p2mpTlRowStatus

This object may be used to create or delete a timeline control
specification. Once created data sampling starts based on the
value of p2mpTlAction.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.9.9.180.2.1.1.13

p2mpTlSummaryTable

table

.1.3.6.1.4.1.9.9.180.2.2 · 1 row entry · 3 columns

Open in standard view

This table contains Timeline Summary collected based on the
specifications in the p2mpTlCtrlTable.

p2mpTlSummaryEntry entry .1.3.6.1.4.1.9.9.180.2.2.1

This represents one entry in the p2mpTlSummaryTable.

At the head end:
When viewing the summary of a timeline created for a specific
subscriber unit, the user must specify the subscriber unit's
MAC address…

Indexes

IF-MIBifIndex p2mpTlSuMacAddress p2mpTlClass

Column	Syntax	OID
p2mpTlUpdateTime This object represents the sysUpTime when this timeline capture was completed.	secondsCISCO-WIRELESS-TC-MIBCwrUpdateTime Textual Convention: CISCO-WIRELESS-TC-MIBCwrUpdateTime `Integer32` Type Constraints: `range: 0..2147483647`	`.1.3.6.1.4.1.9.9.180.2.2.1.1`
p2mpTlNumValues This object represents the number of values available in the timeline	Integer32 Constraints: `range: 0-2147483647`	`.1.3.6.1.4.1.9.9.180.2.2.1.2`
p2mpTlTriggerLoc This object contains the value of p2mpTlValueIndex which represents the entry in the p2mpTlDataTable that caused the stop trigger to fire, thereby resulting in this timeline to be collected.	Integer32 Constraints: `range: 0-2147483647`	`.1.3.6.1.4.1.9.9.180.2.2.1.3`

p2mpTlDataTable

table

.1.3.6.1.4.1.9.9.180.2.3 · 1 row entry · 2 columns

Open in standard view

This table contains timeline values collected based on the
specifications in the p2mpTlCtrlTable.

p2mpTlDataEntry entry .1.3.6.1.4.1.9.9.180.2.3.1

This represents one entry in the p2mpTlDataTable.

At the head end:
When viewing the data of a timeline created for a specific
subscriber unit, the user must specify the subscriber unit's
MAC address and t…

Indexes

IF-MIBifIndex p2mpTlSuMacAddress p2mpTlClass p2mpTlValueIndex

Column	Syntax	OID
p2mpTlValueIndex This object is the index into the timeline data.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.9.9.180.2.3.1.1`
p2mpTlValue This object represents the radio signal data sampled.	CISCO-WIRELESS-TC-MIBCwrFixedPointValue Textual Convention: CISCO-WIRELESS-TC-MIBCwrFixedPointValue `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.9.9.180.2.3.1.2`

p2mpThresholdTable

table

.1.3.6.1.4.1.9.9.180.3.1 · 1 row entry · 7 columns

Open in standard view

This table enables the user to establish thresholds for the 
radio signals analyzed on the radio interface.

p2mpThresholdEntry entry .1.3.6.1.4.1.9.9.180.3.1.1

This represents one entry in the p2mpThresholdTable.

At the head end:
Thresholds can be created on each upstream channel either on a
per channel or per subscriber unit basis.

When creating thre…

Indexes

IF-MIBifIndex p2mpThreshSuMacAddr p2mpThreshAttribute p2mpThreshType

Column Syntax OID

p2mpThreshSuMacAddr

This object is used to index this table.

At the head end:
When a threshold is created on a per subscriber unit basis,
this object should reflect the MAC address of the subscriber
unit.
When a…

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.9.9.180.3.1.1.1

p2mpThreshAttribute

This represents the attribute of a radio link which needs to be
thresholded. For each of these attributes, the p2mpThreshType
identifies the type of change to monitor. When that threshold is
exceeded a Trap with approp…

CISCO-WIRELESS-TC-MIBP2mpRadioSignalAttribute

Textual Convention: CISCO-WIRELESS-TC-MIBP2mpRadioSignalAttribute Enumeration

Type Values:

0	none
1	rsaSinrMainAnt
2	rsaSinrDiversityAnt
3	rsaSinrRatio
4	rsaTimingOffset
5	rsaRxPowerMainAnt
6	rsaRxPowerDiversityAnt
7	rsaChDelaySpreadMainAnt
8	rsaChDelaySpreadDiversityAnt
9	rsaHeAmbientNoise
10	rsaSuRxPowerDeltaMainAnt
11	rsaSuRxPowerDeltaDiversityAnt
12	rsaSuTotalTxPower

.1.3.6.1.4.1.9.9.180.3.1.1.2

p2mpThreshType

This object represents the kind of change that needs to be
monitored for the p2mpThreshAttribute. An event is generated
when the specified condition is met.

CISCO-WIRELESS-TC-MIBCwrThreshLimitType

Textual Convention: CISCO-WIRELESS-TC-MIBCwrThreshLimitType Enumeration

Type Values:

1	upChange
2	downChange
3	highThresh
4	lowThresh
5	upLimit
6	lowLimit

.1.3.6.1.4.1.9.9.180.3.1.1.3

p2mpThreshValue

This object represents the value to be compared against. The
p2mpThreshType determines the way in which it is used.
It is used as follows:
if p2mpThreshType is ..
highThresh : Notify if data sample exceeds the p2mpThres…

Integer32r/w

Constraints:
range: -2147483647-2147483647

.1.3.6.1.4.1.9.9.180.3.1.1.4

p2mpThreshHysteresisTime

When radio signals oscillate around threshold values, they
potentially flood the system with notifications. This object
specifies the amount of time to wait before sending an identical
notification if the oscillations…

SNMPv2-TCTimeIntervalr/w

Textual Convention: SNMPv2-TCTimeInterval Integer32

Type Constraints:
range: 0..2147483647

.1.3.6.1.4.1.9.9.180.3.1.1.5

p2mpThreshLimitTime

It is desirable to know when a radio signal has stabilized. This
object specifies the amount of time that the radio signal should
stay below the threshold after crossing it. If it does then a
'clear' notification is se…

SNMPv2-TCTimeIntervalr/w

Textual Convention: SNMPv2-TCTimeInterval Integer32

Type Constraints:
range: 0..2147483647

.1.3.6.1.4.1.9.9.180.3.1.1.6

p2mpThreshRowStatus

This object represents the status of this threshold entry. It
may be used to create a new threshold specification.
For every p2mpThreshAttribute one threshold of p2mpThreshType on
one DSP may be created.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.9.9.180.3.1.1.7

p2mpSnapshotCtrlTable

table

.1.3.6.1.4.1.9.9.180.4.1 · 1 row entry · 8 columns

Open in standard view

This table contains information about the snapshots configured 
in hardware. When data is collected it will be stored in
p2mpSnapDataTable. Snapshots can only be captured per DSP.

p2mpSnapshotCtrlEntry entry .1.3.6.1.4.1.9.9.180.4.1.1

This represents one entry in the p2mpSnapshotCntrlTable
It is indexed by the ifIndex of the MAC layer
(propDocsWirelessMaclayer) and p2mpSnapshotDspNum.

Indexes

IF-MIBifIndex p2mpSnapshotDspNum

Column Syntax OID

p2mpSnapshotDspNum

This object represents the DSP on which the snapshot needs to
be collected.

Integer32

Constraints:
range: 1-8

.1.3.6.1.4.1.9.9.180.4.1.1.1

p2mpSnapshotType

This identfies the set of radio signal attributes being
monitored in this snapshot.

CISCO-WIRELESS-TC-MIBP2mpSnapshotAttributer/w

Textual Convention: CISCO-WIRELESS-TC-MIBP2mpSnapshotAttribute OctetString

Type Constraints:
range: 1

.1.3.6.1.4.1.9.9.180.4.1.1.2

p2mpSnapshotDataScale

This variable indicates the exponent to apply to the
fixed-point values in the snapshot data table.

CISCO-WIRELESS-TC-MIBCwrFixedPointScale

Textual Convention: CISCO-WIRELESS-TC-MIBCwrFixedPointScale Enumeration

Type Values:

1	yocto
2	zepto
3	atto
4	femto
5	pico
6	nano
7	micro
8	milli
9	units
10	kilo
11	mega
12	giga
13	tera
14	exa
15	peta
16	zetta
17	yotta

.1.3.6.1.4.1.9.9.180.4.1.1.3

p2mpSnapshotDataPrecision

This variable indicates the number of decimal places used for
precision when interpreting the fixed-point values in the
snapshot data table.

CISCO-WIRELESS-TC-MIBCwrFixedPointPrecision

Textual Convention: CISCO-WIRELESS-TC-MIBCwrFixedPointPrecision Integer32

Type Constraints:
range: 0..9

.1.3.6.1.4.1.9.9.180.4.1.1.4

p2mpSnapshotOwner

This object identifies management station that created this
snapshot specification.

IF-MIBOwnerStringr/w

Textual Convention: IF-MIBOwnerString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.180.4.1.1.5

p2mpSnapshotAction

This object represents the action to be carried out on this
snapshot specification. If a snapshot has been successfully
captured then it must be cleared before another capture
may be initiated.

CISCO-WIRELESS-TC-MIBCwrCollectionActionr/w

Textual Convention: CISCO-WIRELESS-TC-MIBCwrCollectionAction Enumeration

Type Values:

1	actionStop
2	actionStart
3	actionClear
4	actionRestart

.1.3.6.1.4.1.9.9.180.4.1.1.6

p2mpSnapshotStatus

This object represents the current status of this snapshot
specification. When the status in statusInProgress none of the
snapshot parameters can be configured. When the status is
statusCaptured then data is available f…

CISCO-WIRELESS-TC-MIBCwrCollectionStatus

Textual Convention: CISCO-WIRELESS-TC-MIBCwrCollectionStatus Enumeration

Type Values:

1	statusIdle
2	statusInProgress
3	statusStopped
4	statusCaptured

.1.3.6.1.4.1.9.9.180.4.1.1.7

p2mpSnapshotRowStatus

This object may be used to create or delete this snapshot
specification.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.9.9.180.4.1.1.8

p2mpSnapSummaryTable

table

.1.3.6.1.4.1.9.9.180.4.2 · 1 row entry · 8 columns

Open in standard view

This table contains summary information for captured snapshots
defined in p2mpSnapshotCtrlTable.

p2mpSnapSummaryEntry entry .1.3.6.1.4.1.9.9.180.4.2.1

This represents one entry in the p2mpSnapSummaryTable. It is
indexed by the ifIndex of the MAC layer
(propDocsWirelessMaclayer) and p2mpSnapshotDspNum.

Indexes

IF-MIBifIndex p2mpSnapshotDspNum

Column	Syntax	OID
p2mpSnapAttr1Id This object represents the bit in the P2mpSnapshotAttribute bitmask that identifies the first attribute value.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.9.9.180.4.2.1.2`
p2mpSnapAttr1Size This object represents the number of values captured for the snapshot p2mpSnapAttr1Id.	Integer32 Constraints: `range: 0-4096`	`.1.3.6.1.4.1.9.9.180.4.2.1.3`
p2mpSnapAttr2Id This object represents the bit in the P2mpSnapshotAttribute bitmask that identifies the second attribute value.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.9.9.180.4.2.1.4`
p2mpSnapAttr2Size This object represents the number of values captured for the snapshot p2mpSnapAttr2Id.	Integer32 Constraints: `range: 0-4096`	`.1.3.6.1.4.1.9.9.180.4.2.1.5`
p2mpSnapAttr3Id This object represents the bit in the P2mpSnapshotAttribute bitmask that identifies the third attribute value.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.9.9.180.4.2.1.6`
p2mpSnapAttr3Size This object represents the number of values captured for the snapshot p2mpSnapAttr3Id.	Integer32 Constraints: `range: 0-4096`	`.1.3.6.1.4.1.9.9.180.4.2.1.7`
p2mpSnapAttr4Id This object represents the bit in the P2mpSnapshotAttribute bitmask that identifies the fourth attribute value.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.9.9.180.4.2.1.8`
p2mpSnapAttr4Size This object represents the number of values captured for the snapshot p2mpSnapAttr4Id.	Integer32 Constraints: `range: 0-4096`	`.1.3.6.1.4.1.9.9.180.4.2.1.9`

p2mpSnapDataTable

table

.1.3.6.1.4.1.9.9.180.4.3 · 1 row entry · 3 columns

Open in standard view

This table contains snapshot values collected based on the
specifications in the p2mpSnapshotCtrlTable.

p2mpSnapDataEntry entry .1.3.6.1.4.1.9.9.180.4.3.1

This represents one entry in the P2mpSnapDataTable. It is
indexed by ifIndex of the MAC layer (propDocsWirelessMaclayer),
p2mpSnapshotIndex, and p2mpSnapValueIndex.

The values in this table represent real…

Indexes

IF-MIBifIndex p2mpSnapshotDspNum p2mpSnapValueIndex

Column	Syntax	OID
p2mpSnapValueIndex This object represents the snapshot entry value number. The hardware provides a maximum of 1024 data points for any snapshot attribute. Since we can capture a maximum of 4 attributes in a single snapshot, this objec…	Integer32 Constraints: `range: 1-4096`	`.1.3.6.1.4.1.9.9.180.4.3.1.1`
p2mpRealPart The data sample value. Real part.	CISCO-WIRELESS-TC-MIBCwrFixedPointValue Textual Convention: CISCO-WIRELESS-TC-MIBCwrFixedPointValue `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.9.9.180.4.3.1.2`
p2mpImaginaryPart The data sample value. Imaginary part of the attribute is represented by a complex number.	CISCO-WIRELESS-TC-MIBCwrFixedPointValue Textual Convention: CISCO-WIRELESS-TC-MIBCwrFixedPointValue `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.9.9.180.4.3.1.3`