p2mpTlPostTrigBufMgmt
CISCO-WIRELESS-P2MP-RF-METRICS-MIB ·
.1.3.6.1.4.1.9.9.180.2.1.1.10
Object
column
r/w
Enumeration
Once a trigger fires, this object determines which portion of
the collected data to capture for use. If it is:
preTrigger(1) : Then most of the data collected prior to trigger
is captured.
postTrigger(2): Then most of the data collected after the trigger
is captured.
Context
- MIB
- CISCO-WIRELESS-P2MP-RF-METRICS-MIB
- OID
.1.3.6.1.4.1.9.9.180.2.1.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- p2mpTlCtrlEntry
- Table
- p2mpTlCtrlTable
- Siblings
- 12
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | preTrigger |
2 | postTrigger |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| p2mpTlSuMacAddress This object is used to index this table.
At the head end:
When a timeline is created on a per subscriber unit basis,
this object should reflect the MAC address of the subscr… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.9.9.180.2.1.1.1 |
| p2mpTlOwner This object identifies the management station that created this
timeline specification. | column | IF-MIBOwnerString | .1.3.6.1.4.1.9.9.180.2.1.1.11 |
| p2mpTlStatus This object represents the current state of this timeline.
Once the timeline collection is complete the status changes to
statusCaptured and the data is available for use.
None o… | column | CISCO-WIRELESS-TC-MIBCwrCollectionStatus | .1.3.6.1.4.1.9.9.180.2.1.1.12 |
| p2mpTlRowStatus This object may be used to create or delete a timeline control
specification. Once created data sampling starts based on the
value of p2mpTlAction. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.180.2.1.1.13 |
| p2mpTlClass This object represents the attribute for which a timline capture
is requested.
When a timeline is requested p2mpBufSize worth of data will be
captured. | column | CISCO-WIRELESS-TC-MIBP2mpRadioSignalAttribute | .1.3.6.1.4.1.9.9.180.2.1.1.2 |
| p2mpTlThreshAttribute This object, along with p2mpTlThreshType, identifies the
threshold in the p2mpThresholdTable responsible for trigerring
this timeline. When this object's value is none(0), it im… | column | CISCO-WIRELESS-TC-MIBP2mpRadioSignalAttribute | .1.3.6.1.4.1.9.9.180.2.1.1.3 |
| p2mpTlThreshType This object, along with p2mpTlThreshAttribute, identifies the
threshold in the p2mpThresholdTable responsible for trigerring
this timeline. When this object's value is none(0),… | column | CISCO-WIRELESS-TC-MIBCwrThreshLimitType | .1.3.6.1.4.1.9.9.180.2.1.1.4 |
| p2mpTlNumDataValues This object indicates the number of data values to be captured
for this timeline. The captured data can be viewed by reading
the p2mpTlDataTable. | column | number of data values Integer32 | .1.3.6.1.4.1.9.9.180.2.1.1.5 |
| p2mpTlDataScale This variable indicates the exponent to apply to the
fixed-point values in the timeline data table. | column | CISCO-WIRELESS-TC-MIBCwrFixedPointScale | .1.3.6.1.4.1.9.9.180.2.1.1.6 |
| p2mpTlDataPrecision This variable indicates the number of decimal places used for
precision when interpreting the fixed-point values in the
timeline data table. | column | CISCO-WIRELESS-TC-MIBCwrFixedPointPrecision | .1.3.6.1.4.1.9.9.180.2.1.1.7 |
| p2mpTlSamplePeriod This lets the user specify the time in milliseconds between
consecutive timeline samples.
The special value of '0' indicates that the timeline will be
sampled on every burst of d… | column | milliseconds Integer32 | .1.3.6.1.4.1.9.9.180.2.1.1.8 |
| p2mpTlAction This object represents the action to be carried out on this
timeline specification. If a timeline has been successfully
captured then it must be cleared before another capture
may… | column | CISCO-WIRELESS-TC-MIBCwrCollectionAction | .1.3.6.1.4.1.9.9.180.2.1.1.9 |