p2mpStartBinValue
CISCO-WIRELESS-P2MP-RF-METRICS-MIB ·
.1.3.6.1.4.1.9.9.180.1.1.1.6
Object
column
r/w
Integer32
This object represents the maximum of the values that will be collected in the first bin of the histogram. All values <= p2mpStartBinValue are kept in the first histogram bin.
Context
- MIB
- CISCO-WIRELESS-P2MP-RF-METRICS-MIB
- OID
.1.3.6.1.4.1.9.9.180.1.1.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- p2mpHistCtrlEntry
- Table
- p2mpHistCtrlTable
- Siblings
- 13
Syntax
Integer32
Values & Constraints
Object Constraints
range: -2147483647-2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| p2mpHistSuMacAddress This object is used to index this table.
At the head end:
When a histogram is created on a per subscriber unit basis,
this object should reflect the MAC address of the subsc… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.9.9.180.1.1.1.1 |
| p2mpPeriodicSum The histogram data is updated every p2mpUpdateRate seconds.
When set to true(1), the latest histogram data set is summed
with the previous histogram data set and the
p2mpHistSumma… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.180.1.1.1.10 |
| p2mpHistOwner This object identifies management station that created this
histogram specification. | column | IF-MIBOwnerString | .1.3.6.1.4.1.9.9.180.1.1.1.11 |
| p2mpHistAction This object represents the action to be carried out on this
histogram specification. If a histogram has been successfully
captured then it must be cleared before an other capture… | column | CISCO-WIRELESS-TC-MIBCwrCollectionAction | .1.3.6.1.4.1.9.9.180.1.1.1.12 |
| p2mpHistStatus This object represents the current state of this histogram.
Once the histogram collection is complete the status changes to
statusCaptured and the data is available for use.
None… | column | CISCO-WIRELESS-TC-MIBCwrCollectionStatus | .1.3.6.1.4.1.9.9.180.1.1.1.13 |
| p2mpHistRowStatus This object may be used to create or delete a histogram control
specification. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.180.1.1.1.14 |
| p2mpHistClass This objects used to index this table. It represents the
attribute that is being histogrammed. | column | CISCO-WIRELESS-TC-MIBP2mpRadioSignalAttribute | .1.3.6.1.4.1.9.9.180.1.1.1.2 |
| p2mpHistSize This object lets the user select the granularity of the
histogram. The number of bins used for the capture in
each category is hardware dependent. | column | Enumeration | .1.3.6.1.4.1.9.9.180.1.1.1.3 |
| p2mpHistSumScale This variable indicates the exponent to apply to the
fixed-point values in the histogram summary table. | column | CISCO-WIRELESS-TC-MIBCwrFixedPointScale | .1.3.6.1.4.1.9.9.180.1.1.1.4 |
| p2mpHistSumPrecision This variable indicates the number of decimal places used for
precision when interpreting the fixed-point values in the
histogram summary table. | column | CISCO-WIRELESS-TC-MIBCwrFixedPointPrecision | .1.3.6.1.4.1.9.9.180.1.1.1.5 |
| p2mpEndBinValue This object represents the minimum of the values that will be
collected in the last bin of the histogram.
All values >= p2mpEndBinValue are kept in the last histogram
bin. | column | Integer32 | .1.3.6.1.4.1.9.9.180.1.1.1.7 |
| p2mpCollDuration This object specifies the duration for which this histogram
must be accumulated. After successfully accumulating data for
this amount of time the collection stops and the p2mpHi… | column | seconds CISCO-WIRELESS-TC-MIBCwrUpdateTime | .1.3.6.1.4.1.9.9.180.1.1.1.8 |
| p2mpUpdateRate This object represents rate at which snapshots of the histogram
will be available. | column | seconds CISCO-WIRELESS-TC-MIBCwrUpdateTime | .1.3.6.1.4.1.9.9.180.1.1.1.9 |