p2mpCollDuration
CISCO-WIRELESS-P2MP-RF-METRICS-MIB ·
.1.3.6.1.4.1.9.9.180.1.1.1.8
Object
This object specifies the duration for which this histogram must be accumulated. After successfully accumulating data for this amount of time the collection stops and the p2mpHistStatus changes to statusCaptured.
Context
- MIB
- CISCO-WIRELESS-P2MP-RF-METRICS-MIB
- OID
.1.3.6.1.4.1.9.9.180.1.1.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- p2mpHistCtrlEntry
- Table
- p2mpHistCtrlTable
- Siblings
- 13
Syntax
seconds CISCO-WIRELESS-TC-MIBCwrUpdateTime
- Source
- CISCO-WIRELESS-TC-MIBCwrUpdateTime
- Base type
Integer32
Values & Constraints
Type Constraints
range: 0..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| p2mpHistSuMacAddress This object is used to index this table.
At the head end:
When a histogram is created on a per subscriber unit basis,
this object should reflect the MAC address of the subsc… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.9.9.180.1.1.1.1 |
| p2mpPeriodicSum The histogram data is updated every p2mpUpdateRate seconds.
When set to true(1), the latest histogram data set is summed
with the previous histogram data set and the
p2mpHistSumma… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.180.1.1.1.10 |
| p2mpHistOwner This object identifies management station that created this
histogram specification. | column | IF-MIBOwnerString | .1.3.6.1.4.1.9.9.180.1.1.1.11 |
| p2mpHistAction This object represents the action to be carried out on this
histogram specification. If a histogram has been successfully
captured then it must be cleared before an other capture… | column | CISCO-WIRELESS-TC-MIBCwrCollectionAction | .1.3.6.1.4.1.9.9.180.1.1.1.12 |
| p2mpHistStatus This object represents the current state of this histogram.
Once the histogram collection is complete the status changes to
statusCaptured and the data is available for use.
None… | column | CISCO-WIRELESS-TC-MIBCwrCollectionStatus | .1.3.6.1.4.1.9.9.180.1.1.1.13 |
| p2mpHistRowStatus This object may be used to create or delete a histogram control
specification. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.180.1.1.1.14 |
| p2mpHistClass This objects used to index this table. It represents the
attribute that is being histogrammed. | column | CISCO-WIRELESS-TC-MIBP2mpRadioSignalAttribute | .1.3.6.1.4.1.9.9.180.1.1.1.2 |
| p2mpHistSize This object lets the user select the granularity of the
histogram. The number of bins used for the capture in
each category is hardware dependent. | column | Enumeration | .1.3.6.1.4.1.9.9.180.1.1.1.3 |
| p2mpHistSumScale This variable indicates the exponent to apply to the
fixed-point values in the histogram summary table. | column | CISCO-WIRELESS-TC-MIBCwrFixedPointScale | .1.3.6.1.4.1.9.9.180.1.1.1.4 |
| p2mpHistSumPrecision This variable indicates the number of decimal places used for
precision when interpreting the fixed-point values in the
histogram summary table. | column | CISCO-WIRELESS-TC-MIBCwrFixedPointPrecision | .1.3.6.1.4.1.9.9.180.1.1.1.5 |
| p2mpStartBinValue This object represents the maximum of the values that will be
collected in the first bin of the histogram.
All values <= p2mpStartBinValue are kept in the first histogram
bin. | column | Integer32 | .1.3.6.1.4.1.9.9.180.1.1.1.6 |
| p2mpEndBinValue This object represents the minimum of the values that will be
collected in the last bin of the histogram.
All values >= p2mpEndBinValue are kept in the last histogram
bin. | column | Integer32 | .1.3.6.1.4.1.9.9.180.1.1.1.7 |
| p2mpUpdateRate This object represents rate at which snapshots of the histogram
will be available. | column | seconds CISCO-WIRELESS-TC-MIBCwrUpdateTime | .1.3.6.1.4.1.9.9.180.1.1.1.9 |