p2mpThresholdEntry
CISCO-WIRELESS-P2MP-RF-METRICS-MIB ·
.1.3.6.1.4.1.9.9.180.3.1.1
Object
row
This represents one entry in the p2mpThresholdTable.
At the head end:
Thresholds can be created on each upstream channel either on a
per channel or per subscriber unit basis.
When creating thresholds on a per subscriber unit basis, the
user must specify the subscriber unit's MAC address and the
ifIndex of the MAC layer (propDocsWirelessMaclayer) at the
head end.
When creating thresholds on a per channel basis, the user
must set the MAC address to zero(00 00 00 00 00 00). The channel
ID is specified by the ifIndex of the upstream channel. Hence,
when creating thresholds on a per channel basis, the ifIndex must
be set to the ifIndex of the upstream channel
(propDocsWirelessUpstream) on which the threshold is created.
At the subscriber end:
Thresholds can only be created on the downstream channel. Since
there is only one downstream channel, thresholds cannot be
created per channel ID. Hence, when a thresholds is created, the
users sets the MAC address (p2mpThreshSuMacAdress) to
zero(00 00 00 00 00 00). The ifIndex must be set to the ifIndex
of the downstream channel (propDocsWirelessDownstream).
Context
- MIB
- CISCO-WIRELESS-P2MP-RF-METRICS-MIB
- OID
.1.3.6.1.4.1.9.9.180.3.1.1- Type
- row
- Status
- current
- Parent
- p2mpThresholdTable
- Table
- p2mpThresholdTable
- Children
- 7
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| p2mpThreshSuMacAddr This object is used to index this table.
At the head end:
When a threshold is created on a per subscriber unit basis,
this object should reflect the MAC addre… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.9.9.180.3.1.1.1 |
| p2mpThreshAttribute This represents the attribute of a radio link which needs to be
thresholded. For each of these attributes, the p2mpThreshType
identifies the type of change to monitor. When that … | column | CISCO-WIRELESS-TC-MIBP2mpRadioSignalAttribute | .1.3.6.1.4.1.9.9.180.3.1.1.2 |
| p2mpThreshType This object represents the kind of change that needs to be
monitored for the p2mpThreshAttribute. An event is generated
when the specified condition is met. | column | CISCO-WIRELESS-TC-MIBCwrThreshLimitType | .1.3.6.1.4.1.9.9.180.3.1.1.3 |
| p2mpThreshValue This object represents the value to be compared against. The
p2mpThreshType determines the way in which it is used.
It is used as follows:
if p2mpThreshType is ..
highThresh : Not… | column | Integer32 | .1.3.6.1.4.1.9.9.180.3.1.1.4 |
| p2mpThreshHysteresisTime When radio signals oscillate around threshold values, they
potentially flood the system with notifications. This object
specifies the amount of time to wait before sending an id… | column | SNMPv2-TCTimeInterval | .1.3.6.1.4.1.9.9.180.3.1.1.5 |
| p2mpThreshLimitTime It is desirable to know when a radio signal has stabilized. This
object specifies the amount of time that the radio signal should
stay below the threshold after crossing it. If it… | column | SNMPv2-TCTimeInterval | .1.3.6.1.4.1.9.9.180.3.1.1.6 |
| p2mpThreshRowStatus This object represents the status of this threshold entry. It
may be used to create a new threshold specification.
For every p2mpThreshAttribute one threshold of p2mpThreshType o… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.180.3.1.1.7 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| IF-MIBifIndex A unique value, greater than zero, for each interface. It
is recommended that values are assigned contiguously
starting from 1. The value for each interface sub-layer
must remai… | column | InterfaceIndex | .1.3.6.1.2.1.2.2.1.1 |
| p2mpThreshSuMacAddr This object is used to index this table.
At the head end:
When a threshold is created on a per subscriber unit basis,
this object should reflect the MAC addre… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.9.9.180.3.1.1.1 |
| p2mpThreshAttribute This represents the attribute of a radio link which needs to be
thresholded. For each of these attributes, the p2mpThreshType
identifies the type of change to monitor. When that … | column | CISCO-WIRELESS-TC-MIBP2mpRadioSignalAttribute | .1.3.6.1.4.1.9.9.180.3.1.1.2 |
| p2mpThreshType This object represents the kind of change that needs to be
monitored for the p2mpThreshAttribute. An event is generated
when the specified condition is met. | column | CISCO-WIRELESS-TC-MIBCwrThreshLimitType | .1.3.6.1.4.1.9.9.180.3.1.1.3 |