CISCO-VOICE-IF-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
1
Rows
1
Columns
14
cvIfCfgTable
table.1.3.6.1.4.1.9.9.64.1.1.1
·
1 row entry
·
14 columns
The Voice Common Configuration Table. It contains information about the voice related configuration parameters for both analog and digital telephony interfaces.
An entry in the configuration table for each voice analog
interface or voice feature associated ISDN D channel.
The entry is automatically created when a voice analog
interface hardware is found or ISDN D channel is
con…
interface or voice feature associated ISDN D channel.
The entry is automatically created when a voice analog
interface hardware is found or ISDN D channel is
con…
Indexes
IF-MIBifIndex
| Column | Syntax | OID | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
cvIfCfgNoiseRegEnable
The object indicates whether or not the background noise
should be played to fill silence gaps if VAD is activated. The default value of this object is enabled. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.9.9.64.1.1.1.1.1 |
||||||||||||||||||||
|
cvIfCfgNonLinearProcEnable
The object indicates whether or not the Nonlinear
Processing is enabled for the interface. The default value of this object is enabled. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.9.9.64.1.1.1.1.2 |
||||||||||||||||||||
|
cvIfCfgMusicOnHoldThreshold
The object specifies the Music On Hold Threshold for
the interface. The default value of this object is -38 dBm. |
dBmInteger32r/w Constraints: range: -70--30 |
.1.3.6.1.4.1.9.9.64.1.1.1.1.3 |
||||||||||||||||||||
|
cvIfCfgInGain
This object contains the amount of gain inserted at the
receiver side of the interface. The input gain settings only define a gain/loss relative to the 0 dB setting. The absolute loss at the 0 dB setting could be implem… |
dBInteger32r/w Constraints: range: -6-14 |
.1.3.6.1.4.1.9.9.64.1.1.1.1.4 |
||||||||||||||||||||
|
cvIfCfgOutAttn
This object contains the amount of attenuation inserted
at the transmit side of the interface. The output attenuation settings only define a loss relative to the 0 dB setting. The absolute loss at the 0 dB setting cou… |
dBInteger32r/w Constraints: range: 0-14 |
.1.3.6.1.4.1.9.9.64.1.1.1.1.5 |
||||||||||||||||||||
|
cvIfCfgEchoCancelEnable
The object specifies whether or not the Echo Cancellation
is enabled for the interface. The default value of this object is enabled. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.9.9.64.1.1.1.1.6 |
||||||||||||||||||||
|
cvIfCfgEchoCancelCoverage
The object specifies the Echo Canceller coverage for
the interface. This object is valid if the cvIfCfgEchoCancelEnable object is 'true'. echoCanceller8ms - 8 millisecs echo canceller coverage. echoCanceller16ms - … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.9.9.64.1.1.1.1.7 |
||||||||||||||||||||
|
cvIfCfgConnectionMode
The object indicates the connection mode of the interface.
normal - the interface acts normally to handle incoming and outgoing call. trunk - the interface acts in trunking mode. trunking mode causes … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.9.9.64.1.1.1.1.8 |
||||||||||||||||||||
|
cvIfCfgConnectionNumber
This is the E.164 phone number that is used to
establish connection with trunking mode or PLAR mode. If the cvIfCfgConnectionMode is 'normal', then this object will be a zero length string. |
OctetStringr/w Constraints: range: 0-32 |
.1.3.6.1.4.1.9.9.64.1.1.1.1.9 |
||||||||||||||||||||
|
cvIfCfgInitialDigitTimeOut
This is the initial digit timeout that indicates the amount
of time the managed system waits for an initial input digit from the caller. The timer is activated when the call is accepted and is deactivated upon digit inp… |
secondsInteger32r/w Constraints: range: 0-120 |
.1.3.6.1.4.1.9.9.64.1.1.1.1.10 |
||||||||||||||||||||
|
cvIfCfgInterDigitTimeOut
This is the inter-digit timeout that indicates the amount
of time the managed system waits for a subsequent input digit from the caller. The timer is started upon receipt of an input digit and restarted as each digit is… |
secondsInteger32r/w Constraints: range: 0-120 |
.1.3.6.1.4.1.9.9.64.1.1.1.1.11 |
||||||||||||||||||||
|
cvIfCfgRegionalTone
This object contains the country specific setting
for the tone, ring, cadence parameters to be used by this interface. |
CISCO-TCCountryCoder/w Textual Convention: CISCO-TCCountryCode OctetStringType Constraints: range: 0range: 2 |
.1.3.6.1.4.1.9.9.64.1.1.1.1.12 |
||||||||||||||||||||
|
cvIfCfgEchoCancelWorstERL
The object specifies the worst case Echo Return Loss for
which the echo canceller must operate. To some echo cancellers this object may not apply. This object is valid if the cvIfCfgEchoCancelEnable object is 'true'.… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.9.9.64.1.1.1.1.13 |
||||||||||||||||||||
|
cvIfCfgEchoCanceller
The object specifies which echo canceller is present
on the interface. echoCancellerStandard - for this echo canceller valid values of cvIfCfgEchoCancelCoverage are echoCanceller8ms through echoCanceller32ms; cvIfCfgEc… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.9.9.64.1.1.1.1.14 |