cvIfCfgInterDigitTimeOut

Object

column r/w seconds Integer32

This is the inter-digit timeout that indicates the amount
of time the managed system waits for a subsequent input
digit from the caller. The timer is started upon receipt
of an input digit and restarted as each digit is received
until the destination address is identified. If the timer
expires and no destination address is identified, the
caller is signaled through the appropriate tone and the
call is abandoned. The value of zero disables the timer.
The default value of this object is 10 seconds.

Context

MIB: CISCO-VOICE-IF-MIB
OID: .1.3.6.1.4.1.9.9.64.1.1.1.1.11
Type: column
Access: readwrite
Status: current
Units: seconds
Parent: cvIfCfgEntry
Table: cvIfCfgTable
Siblings: 13

Related Objects

Sibling Objects

Object	Type	Syntax	OID
cvIfCfgNoiseRegEnable The object indicates whether or not the background noise should be played to fill silence gaps if VAD is activated. The default value of this object is enabled.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.64.1.1.1.1.1`
cvIfCfgInitialDigitTimeOut This is the initial digit timeout that indicates the amount of time the managed system waits for an initial input digit from the caller. The timer is activated when the call is ac…	column	seconds Integer32	`.1.3.6.1.4.1.9.9.64.1.1.1.1.10`
cvIfCfgRegionalTone This object contains the country specific setting for the tone, ring, cadence parameters to be used by this interface.	column	CISCO-TCCountryCode	`.1.3.6.1.4.1.9.9.64.1.1.1.1.12`
cvIfCfgEchoCancelWorstERL The object specifies the worst case Echo Return Loss for which the echo canceller must operate. To some echo cancellers this object may not apply. This object is valid if the c…	column	Enumeration	`.1.3.6.1.4.1.9.9.64.1.1.1.1.13`
cvIfCfgEchoCanceller The object specifies which echo canceller is present on the interface. echoCancellerStandard - for this echo canceller valid values of cvIfCfgEchoCancelCoverage are echoCanceller8…	column	Enumeration	`.1.3.6.1.4.1.9.9.64.1.1.1.1.14`
cvIfCfgNonLinearProcEnable The object indicates whether or not the Nonlinear Processing is enabled for the interface. The default value of this object is enabled.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.64.1.1.1.1.2`
cvIfCfgMusicOnHoldThreshold The object specifies the Music On Hold Threshold for the interface. The default value of this object is -38 dBm.	column	dBm Integer32	`.1.3.6.1.4.1.9.9.64.1.1.1.1.3`
cvIfCfgInGain This object contains the amount of gain inserted at the receiver side of the interface. The input gain settings only define a gain/loss relative to the 0 dB setting. The absolute …	column	dB Integer32	`.1.3.6.1.4.1.9.9.64.1.1.1.1.4`
cvIfCfgOutAttn This object contains the amount of attenuation inserted at the transmit side of the interface. The output attenuation settings only define a loss relative to the 0 dB setting. T…	column	dB Integer32	`.1.3.6.1.4.1.9.9.64.1.1.1.1.5`
cvIfCfgEchoCancelEnable The object specifies whether or not the Echo Cancellation is enabled for the interface. The default value of this object is enabled.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.64.1.1.1.1.6`
cvIfCfgEchoCancelCoverage The object specifies the Echo Canceller coverage for the interface. This object is valid if the cvIfCfgEchoCancelEnable object is 'true'. echoCanceller8ms - 8 millisecs echo c…	column	Enumeration	`.1.3.6.1.4.1.9.9.64.1.1.1.1.7`
cvIfCfgConnectionMode The object indicates the connection mode of the interface. normal - the interface acts normally to handle incoming and outgoing call. trunk - the interface acts in trunk…	column	Enumeration	`.1.3.6.1.4.1.9.9.64.1.1.1.1.8`
cvIfCfgConnectionNumber This is the E.164 phone number that is used to establish connection with trunking mode or PLAR mode. If the cvIfCfgConnectionMode is 'normal', then this object will be a zero le…	column	OctetString	`.1.3.6.1.4.1.9.9.64.1.1.1.1.9`

Object

Context

Syntax

Values & Constraints

Related Objects