cvIfCfgEchoCanceller

CISCO-VOICE-IF-MIB · .1.3.6.1.4.1.9.9.64.1.1.1.1.14

MIB view Table view

Object

column Enumeration

The object specifies which echo canceller is present
on the interface.
echoCancellerStandard - for this echo canceller valid
values of cvIfCfgEchoCancelCoverage are echoCanceller8ms
 through echoCanceller32ms; cvIfCfgEchoCancelWorstERL is 
not valid.
echoCancellerExtended - for this echo canceller valid
values of cvIfCfgEchoCancelCoverage are echoCanceller24ms
through echoCanceller128ms; cvIfCfgEchoCancelWorstERL is
 valid.

Context

MIB: CISCO-VOICE-IF-MIB
OID: .1.3.6.1.4.1.9.9.64.1.1.1.1.14
Type: column
Access: readonly
Status: current
Parent: cvIfCfgEntry
Table: cvIfCfgTable
Siblings: 13

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	echoCancellerStandard
`2`	echoCancellerExtended

Related Objects

Sibling Objects

Object	Type	Syntax	OID
cvIfCfgNoiseRegEnable The object indicates whether or not the background noise should be played to fill silence gaps if VAD is activated. The default value of this object is enabled.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.64.1.1.1.1.1`
cvIfCfgInitialDigitTimeOut This is the initial digit timeout that indicates the amount of time the managed system waits for an initial input digit from the caller. The timer is activated when the call is ac…	column	seconds Integer32	`.1.3.6.1.4.1.9.9.64.1.1.1.1.10`
cvIfCfgInterDigitTimeOut This is the inter-digit timeout that indicates the amount of time the managed system waits for a subsequent input digit from the caller. The timer is started upon receipt of an in…	column	seconds Integer32	`.1.3.6.1.4.1.9.9.64.1.1.1.1.11`
cvIfCfgRegionalTone This object contains the country specific setting for the tone, ring, cadence parameters to be used by this interface.	column	CISCO-TCCountryCode	`.1.3.6.1.4.1.9.9.64.1.1.1.1.12`
cvIfCfgEchoCancelWorstERL The object specifies the worst case Echo Return Loss for which the echo canceller must operate. To some echo cancellers this object may not apply. This object is valid if the c…	column	Enumeration	`.1.3.6.1.4.1.9.9.64.1.1.1.1.13`
cvIfCfgNonLinearProcEnable The object indicates whether or not the Nonlinear Processing is enabled for the interface. The default value of this object is enabled.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.64.1.1.1.1.2`
cvIfCfgMusicOnHoldThreshold The object specifies the Music On Hold Threshold for the interface. The default value of this object is -38 dBm.	column	dBm Integer32	`.1.3.6.1.4.1.9.9.64.1.1.1.1.3`
cvIfCfgInGain This object contains the amount of gain inserted at the receiver side of the interface. The input gain settings only define a gain/loss relative to the 0 dB setting. The absolute …	column	dB Integer32	`.1.3.6.1.4.1.9.9.64.1.1.1.1.4`
cvIfCfgOutAttn This object contains the amount of attenuation inserted at the transmit side of the interface. The output attenuation settings only define a loss relative to the 0 dB setting. T…	column	dB Integer32	`.1.3.6.1.4.1.9.9.64.1.1.1.1.5`
cvIfCfgEchoCancelEnable The object specifies whether or not the Echo Cancellation is enabled for the interface. The default value of this object is enabled.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.64.1.1.1.1.6`
cvIfCfgEchoCancelCoverage The object specifies the Echo Canceller coverage for the interface. This object is valid if the cvIfCfgEchoCancelEnable object is 'true'. echoCanceller8ms - 8 millisecs echo c…	column	Enumeration	`.1.3.6.1.4.1.9.9.64.1.1.1.1.7`
cvIfCfgConnectionMode The object indicates the connection mode of the interface. normal - the interface acts normally to handle incoming and outgoing call. trunk - the interface acts in trunk…	column	Enumeration	`.1.3.6.1.4.1.9.9.64.1.1.1.1.8`
cvIfCfgConnectionNumber This is the E.164 phone number that is used to establish connection with trunking mode or PLAR mode. If the cvIfCfgConnectionMode is 'normal', then this object will be a zero le…	column	OctetString	`.1.3.6.1.4.1.9.9.64.1.1.1.1.9`