cvIfCfgInitialDigitTimeOut
CISCO-VOICE-IF-MIB ·
.1.3.6.1.4.1.9.9.64.1.1.1.1.10
Object
column
r/w
seconds Integer32
This is the initial digit timeout that indicates the amount of time the managed system waits for an initial input digit from the caller. The timer is activated when the call is accepted and is deactivated upon digit input. If the timer expires, the caller is signaled through the appropriate tone and the call is abandoned. The value of zero disables the timer. The default value of this object is 10 seconds.
Context
- MIB
- CISCO-VOICE-IF-MIB
- OID
.1.3.6.1.4.1.9.9.64.1.1.1.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- cvIfCfgEntry
- Table
- cvIfCfgTable
- Siblings
- 13
Syntax
seconds Integer32
Values & Constraints
Object Constraints
range: 0-120
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cvIfCfgNoiseRegEnable The object indicates whether or not the background noise
should be played to fill silence gaps if VAD is
activated.
The default value of this object is enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.64.1.1.1.1.1 |
| cvIfCfgInterDigitTimeOut This is the inter-digit timeout that indicates the amount
of time the managed system waits for a subsequent input
digit from the caller. The timer is started upon receipt
of an in… | column | seconds Integer32 | .1.3.6.1.4.1.9.9.64.1.1.1.1.11 |
| cvIfCfgRegionalTone This object contains the country specific setting
for the tone, ring, cadence parameters to be used by
this interface. | column | CISCO-TCCountryCode | .1.3.6.1.4.1.9.9.64.1.1.1.1.12 |
| cvIfCfgEchoCancelWorstERL The object specifies the worst case Echo Return Loss for
which the echo canceller must operate. To some echo
cancellers this object may not apply. This object is
valid if the c… | column | Enumeration | .1.3.6.1.4.1.9.9.64.1.1.1.1.13 |
| cvIfCfgEchoCanceller The object specifies which echo canceller is present
on the interface.
echoCancellerStandard - for this echo canceller valid
values of cvIfCfgEchoCancelCoverage are echoCanceller8… | column | Enumeration | .1.3.6.1.4.1.9.9.64.1.1.1.1.14 |
| cvIfCfgNonLinearProcEnable The object indicates whether or not the Nonlinear
Processing is enabled for the interface.
The default value of this object is enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.64.1.1.1.1.2 |
| cvIfCfgMusicOnHoldThreshold The object specifies the Music On Hold Threshold for
the interface.
The default value of this object is -38 dBm. | column | dBm Integer32 | .1.3.6.1.4.1.9.9.64.1.1.1.1.3 |
| cvIfCfgInGain This object contains the amount of gain inserted at the
receiver side of the interface. The input gain settings
only define a gain/loss relative to the 0 dB setting.
The absolute … | column | dB Integer32 | .1.3.6.1.4.1.9.9.64.1.1.1.1.4 |
| cvIfCfgOutAttn This object contains the amount of attenuation inserted
at the transmit side of the interface.
The output attenuation settings only define a loss
relative to the 0 dB setting.
T… | column | dB Integer32 | .1.3.6.1.4.1.9.9.64.1.1.1.1.5 |
| cvIfCfgEchoCancelEnable The object specifies whether or not the Echo Cancellation
is enabled for the interface.
The default value of this object is enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.64.1.1.1.1.6 |
| cvIfCfgEchoCancelCoverage The object specifies the Echo Canceller coverage for
the interface. This object is valid if the
cvIfCfgEchoCancelEnable object is 'true'.
echoCanceller8ms - 8 millisecs echo c… | column | Enumeration | .1.3.6.1.4.1.9.9.64.1.1.1.1.7 |
| cvIfCfgConnectionMode The object indicates the connection mode of the interface.
normal - the interface acts normally to handle incoming
and outgoing call.
trunk - the interface acts in trunk… | column | Enumeration | .1.3.6.1.4.1.9.9.64.1.1.1.1.8 |
| cvIfCfgConnectionNumber This is the E.164 phone number that is used to
establish connection with trunking mode or PLAR mode.
If the cvIfCfgConnectionMode is 'normal', then this
object will be a zero le… | column | OctetString | .1.3.6.1.4.1.9.9.64.1.1.1.1.9 |