CISCO-SDSL-LINE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

124

cSdslLineTable

table

.1.3.6.1.4.1.9.9.155.1.1 · 1 row entry · 3 columns

Open in standard view

This table contains the enterprise-specific common attributes
describing both ends of SDSL lines supported by the system.

cSdslLineEntry entry .1.3.6.1.4.1.9.9.155.1.1.1

A set of enterprise-specific common attributes describing both
ends of an SDSL line supported by the system. There exists an
entry for each ifEntry with an ifType of sdsl(96).

Indexes

IF-MIBifIndex

Column Syntax OID

cSdslLineCoding

Specifies encoding of signal used by this line. Other types
may be added in the future.

Enumeration

Enumerated Values:

1	other
2	base2b1q
3	tcPam
4	optis
5	cap

.1.3.6.1.4.1.9.9.155.1.1.1.1

cSdslLineFraming

This object specifies the current Transmission Convergence
framing structure being used by the interface.

Enumeration

Enumerated Values:

1	none
2	other
3	hdsl
4	gShdsl
5	hdsl2
6	ds1

.1.3.6.1.4.1.9.9.155.1.1.1.2

cSdslLineSpecific

This object specifies an object identifier of an instance of
an object in the MIB. The implementation determines the
application of this object. For example, an implementation
may use this object to provide a referen…

SNMPv2-TCVariablePointer

Textual Convention: SNMPv2-TCVariablePointer ObjectIdentifier

.1.3.6.1.4.1.9.9.155.1.1.1.3

cSdslStucPhysTable

table

.1.3.6.1.4.1.9.9.155.1.2 · 1 row entry · 11 columns

Open in standard view

This table contains enterprise-specific physical layer
parameters for STU-C class devices supported by the system.

cSdslStucPhysEntry entry .1.3.6.1.4.1.9.9.155.1.2.1

A set of enterprise-specific physical-layer parameters for an
STU-C class device supported by the system. There exists an
entry for each ifEntry with an ifType of sdsl(96).

Indexes

IF-MIBifIndex

Column Syntax OID

cSdslStucInvSerialNumber

This object specifies the vendor specific string that
identifies the vendor STU-C.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.9.9.155.1.2.1.1

cSdslStucInvVendorId

This object specifies the vendor identifier assigned according
to T1.220

OctetString

Constraints:
range: 0-16

.1.3.6.1.4.1.9.9.155.1.2.1.2

cSdslStucInvVersionNumber

This object specifies the vendor specific version number of
the STU-C.

OctetString

Constraints:
range: 0-16

.1.3.6.1.4.1.9.9.155.1.2.1.3

cSdslStucState

This object specifies the state of the STU-C transceiver.

Enumeration

Enumerated Values:

1	other
2	idle
3	training
4	steadyState
5	testing
6	downloading
7	downloadFailed

.1.3.6.1.4.1.9.9.155.1.2.1.4

cSdslStucDefect

This object specifies any possible defects currently being
exhibited by the STU-C.

This object has the intention of supplementing ifOperStatus.

SdslStuxDefect

Textual Convention: SdslStuxDefect Bits

Type Values:

0	lossOfSignal
1	lossOfSignalQuality
2	noPeerStuPresent
3	lossOfSyncFailure

.1.3.6.1.4.1.9.9.155.1.2.1.5

cSdslStucCurrRate

This object specifies the rate the STU-C transceiver was
able to obtain following training.

bpsInteger32

Constraints:
range: 0-2320000

.1.3.6.1.4.1.9.9.155.1.2.1.6

cSdslStucCurrSnrMgn

This object specifies the SNR margin as seen by this STU-C with
respect to its received signal.

tenth dBSNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.155.1.2.1.7

cSdslStucCurrGain deprecated

This object specifies gain applied to this STU-C's receiver.
This object is deprecated by cSdslStucCurrGainRev which has
no specified range.

tenth dBInteger32

Constraints:
range: -200-200

.1.3.6.1.4.1.9.9.155.1.2.1.8

cSdslStucCurrOutputPwr

This object specifies the measured total output power
transmitted by this STU-C. This is the measurement that was
reported during the last activation sequence.

tenth dBmSNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.155.1.2.1.9

cSdslStucCurrAtn

Measured difference in the total power transmitted by
the peer STU-R and the total power received by this STU-C.

tenth dBmSNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.155.1.2.1.10

cSdslStucCurrGainRev

This object specifies gain applied to this STU-C's receiver.
This object deprecates cSdslStucCurrGainRev and has
no specified range.

tenth dBSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.155.1.2.1.11

cSdslSturPhysTable

table

.1.3.6.1.4.1.9.9.155.1.3 · 1 row entry · 11 columns

Open in standard view

This table contains enterprise-specific physical layer
parameters for STU-R class devices supported by the system.
          
--      Note to implementor:
--      If the implementation does not support remote management
--      of STU-R class devices, then the agent must respond with
--      the appropriate error indicating that the instance does not
--      exist; that is, 'noSuchName' in response to a SNMPv1 get
--      request, 'noSuchInstance' in response to a SNMPv2 get
--      request or a null string for string types.

cSdslSturPhysEntry entry .1.3.6.1.4.1.9.9.155.1.3.1

A set of enterprise-specific physical-layer parameters for an
STU-R class device supported by the system. There exists an
entry for each ifEntry with an ifType of sdsl(96).

Indexes

IF-MIBifIndex

Column Syntax OID

cSdslSturInvSerialNumber

This object specifies the vendor specific string that
identifies the vendor STU-R.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.9.9.155.1.3.1.1

cSdslSturInvVendorId

This object specifies the vendor identifier assigned according
to T1.220

OctetString

Constraints:
range: 0-16

.1.3.6.1.4.1.9.9.155.1.3.1.2

cSdslSturInvVersionNumber

This object specifies the vendor specific version number of
the STU-R.

OctetString

Constraints:
range: 0-16

.1.3.6.1.4.1.9.9.155.1.3.1.3

cSdslSturState

This object specifies the state of the STU-R transceiver.

Enumeration

Enumerated Values:

1	other
2	training
3	steadyState

.1.3.6.1.4.1.9.9.155.1.3.1.4

cSdslSturDefect

This object specifies any possible defects currently being
exhibited by the STU-R.

This object has the intention of supplementing ifOperStatus.

SdslStuxDefect

Textual Convention: SdslStuxDefect Bits

Type Values:

0	lossOfSignal
1	lossOfSignalQuality
2	noPeerStuPresent
3	lossOfSyncFailure

.1.3.6.1.4.1.9.9.155.1.3.1.5

cSdslSturCurrRate

This object specifies the rate the STU-R transceiver was
able to obtain following training.

bpsInteger32

Constraints:
range: 0-2320000

.1.3.6.1.4.1.9.9.155.1.3.1.6

cSdslSturCurrSnrMgn

This object specifies the SNR margin as seen by this STU-R with
respect to its received signal.

tenth dBSNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.155.1.3.1.7

cSdslSturCurrGain deprecated

This object specifies gain applied to this STU-R's receiver.
This object is deprecated by cSdslSturCurrGainRev which has
no specified range.

tenth dBInteger32

Constraints:
range: -200-200

.1.3.6.1.4.1.9.9.155.1.3.1.8

cSdslSturCurrOutputPwr

This object specifies the measured total output power
transmitted by this STU-R. This is the measurement that was
reported during the last activation sequence.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.155.1.3.1.9

cSdslSturCurrAtn

Measured difference in the total power transmitted by
the peer STU-C and the total power received by this STU-R

tenth dBmSNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.155.1.3.1.10

cSdslSturCurrGainRev

This object specifies gain applied to this STU-R's receiver.
This object deprecates by cSdslSturCurrGain and has
no specified range.

tenth dBSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.155.1.3.1.11

cSdslStucPerfDataTable

table

.1.3.6.1.4.1.9.9.155.1.6 · 1 row entry · 37 columns

Open in standard view

This table contains physical-layer statistics for STU-C class
devices supported by the system.

cSdslStucPerfDataEntry entry .1.3.6.1.4.1.9.9.155.1.6.1

A set of physical-layer statistics for an STU-C class device
supported by the system. There exists an entry for each ifEntry
with an ifType of sdsl(96).

Indexes

IF-MIBifIndex

Column	Syntax	OID
cSdslStucPerfLOSs This object specifies the number of LOS failures experienced by the STU-C since agent reset.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.155.1.6.1.1`
cSdslStucPerfLOSQs This object specifies the number of LOSQ failures experienced by the STU-C since agent reset.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.155.1.6.1.2`
cSdslStucPerfCVs This object specifies the number of coding violations experienced by the STU-C since agent reset.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.155.1.6.1.3`
cSdslStucPerfESs This object specifies the number of errored seconds experienced by the STU-C since agent reset.	secondsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.155.1.6.1.4`
cSdslStucPerfSESs This object specifies the number of severely errored seconds experienced by the STU-C since agent reset.	secondsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.155.1.6.1.5`
cSdslStucPerfUASs This object specifies the number of unavailable seconds experienced by the STU-C since agent reset.	secondsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.155.1.6.1.6`
cSdslStucPerfInits This object specifies the number of line initializations attempted by the STU-C since agent reset. This value includes both successful and failed attempts.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.155.1.6.1.7`
cSdslStucUnavailRsrcs This object specifies the number of packets discarded on the STU-C due to unavailable resources, such as lack of buffer space.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.155.1.6.1.8`
cSdslStucPerfValidIntervals The number of previous near end intervals for which valid data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complet…	Integer32 Constraints: `range: 0-96`	`.1.3.6.1.4.1.9.9.155.1.6.1.9`
cSdslStucPerfInvalidIntervals The number of near-end performance data 15-minute intervals in the range from 0 to cSdslStucPerfValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some i…	Integer32 Constraints: `range: 0-96`	`.1.3.6.1.4.1.9.9.155.1.6.1.10`
cSdslStucPerfCurr15MinTimeElapse The number of seconds that have elapsed since the beginning of the current measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum valu…	secondsUnsigned32 Constraints: `range: 0-899`	`.1.3.6.1.4.1.9.9.155.1.6.1.11`
cSdslStucPerfCurr15MinLOSs This object specifies the number of seconds in the current 15-minute interval when the STU-C experienced LOS.	secondsPerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.9.9.155.1.6.1.12`
cSdslStucPerfCurr15MinLOSQs This object specifies the number of seconds in the current 15-minute interval when the STU-C experienced LOSQ.	secondsPerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.9.9.155.1.6.1.13`
cSdslStucPerfCurr15MinCVs This object specifies the number of coding violations experienced by the STU-C in the current 15-minute interval.	PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.9.9.155.1.6.1.14`
cSdslStucPerfCurr15MinESs This object specifies the number of errored seconds experienced by the STU-C in the current 15-minute interval.	secondsPerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.9.9.155.1.6.1.15`
cSdslStucPerfCurr15MinSESs This object specifies the number of severely errored seconds experienced by the STU-C in the current 15-minute interval.	secondsPerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.9.9.155.1.6.1.16`
cSdslStucPerfCurr15MinUASs This object specifies the number of unavailable seconds experienced by the STU-C in the current 15-minute interval.	secondsPerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.9.9.155.1.6.1.17`
cSdslStucPerfCurr15MinInits This object specifies the number of line initializations attempted by the STU-C in the current 15-minute interval.	PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.9.9.155.1.6.1.18`
cSdslStucPerfCurr15MinUnavlRsrcs This object specifies the number of packets discarded on the STU-C due to unavailable resources, such as lack of buffer space, in the current 15 minute interval.	PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.9.9.155.1.6.1.19`
cSdslStucPerfCurr1DayTimeElapsed The number of seconds that have elapsed since the beginning of the current measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum valu…	secondsUnsigned32 Constraints: `range: 0-86399`	`.1.3.6.1.4.1.9.9.155.1.6.1.20`
cSdslStucPerfCurr1DayLOSs This object specifies the number of seconds experienced by the STU-C in the current 1-day interval when there was LOS.	secondsSdslPerfCurrDayCount Textual Convention: SdslPerfCurrDayCount `Unsigned32`	`.1.3.6.1.4.1.9.9.155.1.6.1.21`
cSdslStucPerfCurr1DayLOSQs This object specifies the number of seconds experienced by the STU-C in the current 1-day interval when there was LOSQ.	secondsSdslPerfCurrDayCount Textual Convention: SdslPerfCurrDayCount `Unsigned32`	`.1.3.6.1.4.1.9.9.155.1.6.1.22`
cSdslStucPerfCurr1DayCVs This object specifies the number of coding violations experienced by the STU-C in the current 1-day interval.	SdslPerfCurrDayCount Textual Convention: SdslPerfCurrDayCount `Unsigned32`	`.1.3.6.1.4.1.9.9.155.1.6.1.23`
cSdslStucPerfCurr1DayESs This object specifies the number of errored seconds experienced by the STU-C in the current 1-day interval.	secondsSdslPerfCurrDayCount Textual Convention: SdslPerfCurrDayCount `Unsigned32`	`.1.3.6.1.4.1.9.9.155.1.6.1.24`
cSdslStucPerfCurr1DaySESs This object specifies the number of severely errored seconds experienced by the STU-C in the current 1-day interval.	secondsSdslPerfCurrDayCount Textual Convention: SdslPerfCurrDayCount `Unsigned32`	`.1.3.6.1.4.1.9.9.155.1.6.1.25`
cSdslStucPerfCurr1DayUASs This object specifies the number of unavailable seconds experienced by the STU-C in the current 1-day interval.	secondsSdslPerfCurrDayCount Textual Convention: SdslPerfCurrDayCount `Unsigned32`	`.1.3.6.1.4.1.9.9.155.1.6.1.26`
cSdslStucPerfCurr1DayInits This object specifies the number of line initializations attempted by the STU-C in the current 1-day interval.	SdslPerfCurrDayCount Textual Convention: SdslPerfCurrDayCount `Unsigned32`	`.1.3.6.1.4.1.9.9.155.1.6.1.27`
cSdslStucPerfCurr1DayUnavlRsrcs This object specifies the number of packets discarded on the STU-C due to unavailable resources, such as lack of buffer space, in the current 1-day interval.	SdslPerfCurrDayCount Textual Convention: SdslPerfCurrDayCount `Unsigned32`	`.1.3.6.1.4.1.9.9.155.1.6.1.28`
cSdslStucPerfPrev1DayMoniSecs The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monit…	secondsInteger32 Constraints: `range: 0-86400`	`.1.3.6.1.4.1.9.9.155.1.6.1.29`
cSdslStucPerfPrev1DayLOSs This object specifies the number of seconds in the current 1-day interval when the STU-C experienced LOS.	secondsSdslPerfPrevDayCount Textual Convention: SdslPerfPrevDayCount `Unsigned32`	`.1.3.6.1.4.1.9.9.155.1.6.1.30`
cSdslStucPerfPrev1DayLOSQs This object specifies the number of seconds in the previous 1-day interval when the STU-C experienced LOSQ.	secondsSdslPerfPrevDayCount Textual Convention: SdslPerfPrevDayCount `Unsigned32`	`.1.3.6.1.4.1.9.9.155.1.6.1.31`
cSdslStucPerfPrev1DayCVs This object specifies the number of coding violations experienced by the STU-C in the previous 1-day interval.	SdslPerfPrevDayCount Textual Convention: SdslPerfPrevDayCount `Unsigned32`	`.1.3.6.1.4.1.9.9.155.1.6.1.32`
cSdslStucPerfPrev1DayESs This object specifies the number of errored seconds experienced by the STU-C in the previous 1-day interval.	secondsSdslPerfPrevDayCount Textual Convention: SdslPerfPrevDayCount `Unsigned32`	`.1.3.6.1.4.1.9.9.155.1.6.1.33`
cSdslStucPerfPrev1DaySESs This object specifies the number of severely errored seconds experienced by the STU-C in the previous 1-day interval.	secondsSdslPerfPrevDayCount Textual Convention: SdslPerfPrevDayCount `Unsigned32`	`.1.3.6.1.4.1.9.9.155.1.6.1.34`
cSdslStucPerfPrev1DayUASs This object specifies the number of unavailable seconds experienced by the STU-C in the previous 1-day interval.	secondsSdslPerfPrevDayCount Textual Convention: SdslPerfPrevDayCount `Unsigned32`	`.1.3.6.1.4.1.9.9.155.1.6.1.35`
cSdslStucPerfPrev1DayInits This object specifies the number of line initializations attempted by the STU-C in the previous 1-day interval.	SdslPerfPrevDayCount Textual Convention: SdslPerfPrevDayCount `Unsigned32`	`.1.3.6.1.4.1.9.9.155.1.6.1.36`
cSdslStucPerfPrev1DayUnavlRsrcs This object specifies the number of packets discarded on the STU-C due to unavailable resources, such as lack of buffer space, in the previous 1-day interval.	SdslPerfPrevDayCount Textual Convention: SdslPerfPrevDayCount `Unsigned32`	`.1.3.6.1.4.1.9.9.155.1.6.1.37`

cSdslSturPerfDataTable

table

.1.3.6.1.4.1.9.9.155.1.7 · 1 row entry · 29 columns

Open in standard view

This table contains physical-layer statistics for STU-R class
devices supported by the system.
          
--      Note to implementor:
--      If the implementation does not support remote management
--      of STU-R class devices, then the agent must respond with
--      the appropriate error indicating that the instance does not
--      exist; that is, 'noSuchName' in response to a SNMPv1 get
--      request, and 'noSuchInstance' in response to a SNMPv2 get
--      request.

cSdslSturPerfDataEntry entry .1.3.6.1.4.1.9.9.155.1.7.1

A set of physical-layer statistics for an STU-R class device
supported by the system. There exists an entry for each ifEntry
with an ifType of sdsl(96).

Indexes

IF-MIBifIndex

Column	Syntax	OID
cSdslSturPerfLOSs This object specifies the number of LOS failures experienced by the STU-R since agent reset.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.155.1.7.1.1`
cSdslSturPerfLOSQs This object specifies the number of LOSQ failures experienced by the STU-R since agent reset.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.155.1.7.1.2`
cSdslSturPerfCVs This object specifies the number of coding violations experienced by the STU-R since agent reset.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.155.1.7.1.3`
cSdslSturPerfESs This object specifies the number of errored seconds experienced by the STU-R since agent reset.	secondsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.155.1.7.1.4`
cSdslSturPerfSESs This object specifies the number of severely errored seconds experienced by the STU-R since agent reset.	secondsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.155.1.7.1.5`
cSdslSturPerfUASs This object specifies the number of unavailable seconds experienced by the STU-R since agent reset.	secondsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.155.1.7.1.6`
cSdslSturPerfValidIntervals The number of previous far end intervals for which valid data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete…	Integer32 Constraints: `range: 0-96`	`.1.3.6.1.4.1.9.9.155.1.7.1.7`
cSdslSturPerfInvalidIntervals The number of far-end performance data 15-minute intervals in the range from 0 to cSdslSturPerfValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some in…	Integer32 Constraints: `range: 0-96`	`.1.3.6.1.4.1.9.9.155.1.7.1.8`
cSdslSturPerfCurr15MinTimeElapse The number of seconds that have elapsed since the beginning of the current measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum valu…	secondsUnsigned32 Constraints: `range: 0-899`	`.1.3.6.1.4.1.9.9.155.1.7.1.9`
cSdslSturPerfCurr15MinLOSs This object specifies the number of seconds in the current 15-minute interval when the STU-R experienced LOS.	secondsPerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.9.9.155.1.7.1.10`
cSdslSturPerfCurr15MinLOSQs This object specifies the number of seconds in the current 15-minute interval when the STU-R experienced LOSQ.	secondsPerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.9.9.155.1.7.1.11`
cSdslSturPerfCurr15MinCVs This object specifies the number of coding violations experienced by the STU-R in the current 15-minute interval.	PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.9.9.155.1.7.1.12`
cSdslSturPerfCurr15MinESs This object specifies the number of errored seconds experienced by the STU-R in the current 15-minute interval.	secondsPerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.9.9.155.1.7.1.13`
cSdslSturPerfCurr15MinSESs This object specifies the number of severely errored seconds experienced by the STU-R in the current 15-minute interval.	secondsPerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.9.9.155.1.7.1.14`
cSdslSturPerfCurr15MinUASs This object specifies the number of unavailable seconds experienced by the STU-R in the current 15-minute interval.	secondsPerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.4.1.9.9.155.1.7.1.15`
cSdslSturPerfCurr1DayTimeElapsed The number of seconds that have elapsed since the beginning of the current measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum valu…	secondsUnsigned32 Constraints: `range: 0-86399`	`.1.3.6.1.4.1.9.9.155.1.7.1.16`
cSdslSturPerfCurr1DayLOSs This object specifies the number of seconds experienced by the STU-R in the current 1-day interval when there was LOS.	secondsSdslPerfCurrDayCount Textual Convention: SdslPerfCurrDayCount `Unsigned32`	`.1.3.6.1.4.1.9.9.155.1.7.1.17`
cSdslSturPerfCurr1DayLOSQs This object specifies the number of seconds experienced by the STU-R in the current 1-day interval when there was LOSQ.	secondsSdslPerfCurrDayCount Textual Convention: SdslPerfCurrDayCount `Unsigned32`	`.1.3.6.1.4.1.9.9.155.1.7.1.18`
cSdslSturPerfCurr1DayCVs This object specifies the number of coding violations experienced by the STU-R in the current 1-day interval.	SdslPerfCurrDayCount Textual Convention: SdslPerfCurrDayCount `Unsigned32`	`.1.3.6.1.4.1.9.9.155.1.7.1.19`
cSdslSturPerfCurr1DayESs This object specifies the number of errored seconds experienced by the STU-R in the current 1-day interval.	secondsSdslPerfCurrDayCount Textual Convention: SdslPerfCurrDayCount `Unsigned32`	`.1.3.6.1.4.1.9.9.155.1.7.1.20`
cSdslSturPerfCurr1DaySESs This object specifies the number of severely errored seconds experienced by the STU-R in the current 1-day interval.	secondsSdslPerfCurrDayCount Textual Convention: SdslPerfCurrDayCount `Unsigned32`	`.1.3.6.1.4.1.9.9.155.1.7.1.21`
cSdslSturPerfCurr1DayUASs This object specifies the number of unavailable seconds experienced by the STU-R in the current 1-day interval.	secondsSdslPerfCurrDayCount Textual Convention: SdslPerfCurrDayCount `Unsigned32`	`.1.3.6.1.4.1.9.9.155.1.7.1.22`
cSdslSturPerfPrev1DayMoniSecs The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monit…	secondsInteger32 Constraints: `range: 0-86400`	`.1.3.6.1.4.1.9.9.155.1.7.1.23`
cSdslSturPerfPrev1DayLOSs This object specifies the number of seconds in the current 1-day interval when the STU-R experienced LOS.	secondsSdslPerfPrevDayCount Textual Convention: SdslPerfPrevDayCount `Unsigned32`	`.1.3.6.1.4.1.9.9.155.1.7.1.24`
cSdslSturPerfPrev1DayLOSQs This object specifies the number of seconds in the previous 1-day interval when the STU-R experienced LOSQ.	secondsSdslPerfPrevDayCount Textual Convention: SdslPerfPrevDayCount `Unsigned32`	`.1.3.6.1.4.1.9.9.155.1.7.1.25`
cSdslSturPerfPrev1DayCVs This object specifies the number of coding violations experienced by the STU-R in the previous 1-day interval.	SdslPerfPrevDayCount Textual Convention: SdslPerfPrevDayCount `Unsigned32`	`.1.3.6.1.4.1.9.9.155.1.7.1.26`
cSdslSturPerfPrev1DayESs This object specifies the number of errored seconds experienced by the STU-R in the previous 1-day interval.	secondsSdslPerfPrevDayCount Textual Convention: SdslPerfPrevDayCount `Unsigned32`	`.1.3.6.1.4.1.9.9.155.1.7.1.27`
cSdslSturPerfPrev1DaySESs This object specifies the number of severely errored seconds experienced by the STU-R in the previous 1-day interval.	secondsSdslPerfPrevDayCount Textual Convention: SdslPerfPrevDayCount `Unsigned32`	`.1.3.6.1.4.1.9.9.155.1.7.1.28`
cSdslSturPerfPrev1DayUASs This object specifies the number of unavailable seconds experienced by the STU-R in the previous 1-day interval.	secondsSdslPerfPrevDayCount Textual Convention: SdslPerfPrevDayCount `Unsigned32`	`.1.3.6.1.4.1.9.9.155.1.7.1.29`

cSdslStucIntervalTable

table

.1.3.6.1.4.1.9.9.155.1.8 · 1 row entry · 10 columns

Open in standard view

This table contains physical-layer statistics intervals for
STU-C class devices supported by the system.  The interval
	tables are modeled after RFC 2493, Textual Conventions for 
	MIB Modules Using Performance History Based on 15 Minute 
	Intervals, RFC 2493

cSdslStucIntervalEntry entry .1.3.6.1.4.1.9.9.155.1.8.1

A 15-miute interval of physical-layer statistics for a STU-C
class device supported by the system. There exists up to 96
entries for each ifEntry with an ifType of sdsl(96).

Indexes

IF-MIBifIndex cSdslStucIntervalNumber

Column Syntax OID

cSdslStucIntervalNumber

The interval in which the statistics were collected, where the
value of 1 represents the most recent interval, and the value of
96 represents the interval collected 24 hours ago. Intervals
2..96 are optional.

Integer32

Constraints:
range: 1-96

.1.3.6.1.4.1.9.9.155.1.8.1.1

cSdslStucIntervalValidData

This object specifies whether the data for this interval
is valid.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.155.1.8.1.2

cSdslStucIntervalLOSs

This object specifies the number of seconds in the interval
when the STU-C experienced LOS.

secondsPerfHist-TC-MIBPerfIntervalCount

Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32

.1.3.6.1.4.1.9.9.155.1.8.1.3

cSdslStucIntervalLOSQs

This object specifies the number of seconds in the interval
when the STU-C experienced LOSQ.

secondsPerfHist-TC-MIBPerfIntervalCount

Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32

.1.3.6.1.4.1.9.9.155.1.8.1.4

cSdslStucIntervalCVs

This object specifies the number of coding violations
experienced by the STU-C in the interval.

PerfHist-TC-MIBPerfIntervalCount

Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32

.1.3.6.1.4.1.9.9.155.1.8.1.5

cSdslStucIntervalESs

This object specifies the number of errored seconds
experienced by the STU-C in the interval.

secondsPerfHist-TC-MIBPerfIntervalCount

Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32

.1.3.6.1.4.1.9.9.155.1.8.1.6

cSdslStucIntervalSESs

This object specifies the number of severely errored seconds
experienced by the STU-C in the interval.

secondsPerfHist-TC-MIBPerfIntervalCount

Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32

.1.3.6.1.4.1.9.9.155.1.8.1.7

cSdslStucIntervalUASs

This object specifies the number of unavailable seconds
experienced by the STU-C in the interval.

secondsPerfHist-TC-MIBPerfIntervalCount

Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32

.1.3.6.1.4.1.9.9.155.1.8.1.8

cSdslStucIntervalInits

This object specifies the number of line initializations
attempted by the STU-C in the interval.

PerfHist-TC-MIBPerfIntervalCount

Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32

.1.3.6.1.4.1.9.9.155.1.8.1.9

cSdslStucIntervalUnavlRsrcs

This object specifies the number of packets discarded on the
STU-C due to unavailable resources, such as lack of buffer
space in the interval.

PerfHist-TC-MIBPerfIntervalCount

Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32

.1.3.6.1.4.1.9.9.155.1.8.1.10

cSdslSturIntervalTable

table

.1.3.6.1.4.1.9.9.155.1.9 · 1 row entry · 8 columns

Open in standard view

This table contains physical-layer statistics intervals for
STU-R class devices supported by the system.  The interval
	tables are modeled after RFC 2493, Textual Conventions for 
	MIB Modules Using Performance History Based on 15 Minute 
	Intervals, RFC 2493

cSdslSturIntervalEntry entry .1.3.6.1.4.1.9.9.155.1.9.1

A 15-miute interval of physical-layer statistics for a STU-R
class device supported by the system. There exists up to 96
entries for each ifEntry with an ifType of sdsl(96).

Indexes

IF-MIBifIndex cSdslSturIntervalNumber

Column Syntax OID

cSdslSturIntervalNumber

Integer32

Constraints:
range: 1-96

.1.3.6.1.4.1.9.9.155.1.9.1.1

cSdslSturIntervalValidData

This object specifies whether the data for this interval
is valid.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.155.1.9.1.2

cSdslSturIntervalLOSs

This object specifies the number of seconds in the interval
when the STU-R experienced LOS.

secondsPerfHist-TC-MIBPerfIntervalCount

Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32

.1.3.6.1.4.1.9.9.155.1.9.1.3

cSdslSturIntervalLOSQs

This object specifies the number of seconds in the interval
when the STU-R experienced LOSQ.

secondsPerfHist-TC-MIBPerfIntervalCount

Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32

.1.3.6.1.4.1.9.9.155.1.9.1.4

cSdslSturIntervalCVs

This object specifies the number of coding violations
experienced by the STU-R in the interval.

PerfHist-TC-MIBPerfIntervalCount

Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32

.1.3.6.1.4.1.9.9.155.1.9.1.5

cSdslSturIntervalESs

This object specifies the number of errored seconds
experienced by the STU-R in the interval.

secondsPerfHist-TC-MIBPerfIntervalCount

Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32

.1.3.6.1.4.1.9.9.155.1.9.1.6

cSdslSturIntervalSESs

This object specifies the number of severely errored seconds
experienced by the STU-R in the interval.

secondsPerfHist-TC-MIBPerfIntervalCount

Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32

.1.3.6.1.4.1.9.9.155.1.9.1.7

cSdslSturIntervalUASs

This object specifies the number of unavailable seconds
experienced by the STU-R in the interval.

secondsPerfHist-TC-MIBPerfIntervalCount

Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32

.1.3.6.1.4.1.9.9.155.1.9.1.8

cSdslLineConfProfileTable

table

.1.3.6.1.4.1.9.9.155.1.14 · 1 row entry · 13 columns

Open in standard view

This table extends the adslLineConfProfileTable and contains
enterprise-specific SDSL line configuration information.

cSdslLineConfProfileEntry entry .1.3.6.1.4.1.9.9.155.1.14.1

A configuration profile containing enterprise-specific SDSL
line configuration information.

Indexes

ADSL-LINE-MIBadslLineConfProfileName

Column Syntax OID

cSdslLineMaxRate

This object specifies the desired line rate which the STU-C
will attempt to train at.

bpsInteger32r/w

Constraints:
range: 1552000-1552000
range: 144000-144000
range: 272000-272000
range: 400000-400000
range: 528000-528000
range: 784000-784000
range: 1040000-1040000
range: 1168000-1168000
range: 2064000-2064000
range: 2320000-2320000

.1.3.6.1.4.1.9.9.155.1.14.1.1

cSdslLineFramingMode

This object specifies the desired Transmission Convergence
framing structure being used by the interface.

Enumerationr/w

Enumerated Values:

1	none
2	other
3	hdsl
4	gShdsl
5	hdsl2
6	ds1

.1.3.6.1.4.1.9.9.155.1.14.1.2

cSdslStucTargetSnrMgn

This object specifies the target SNR margin. This is the
desired noise margin the STU-C must achieve with a BER of
10-7 or better to successfully complete training. The value
for this object must be in multiples of 1…

tenth dBInteger32r/w

Constraints:
range: 0-310

.1.3.6.1.4.1.9.9.155.1.14.1.3

cSdslStucMaxSnrMgn

This object specifies the maximum acceptable SNR margin.
If the noise margin exceeds this level, then the STU-C should
attempt to reduce its power output to optimize its operation.
The value for this object must be in…

tenth dBInteger32r/w

Constraints:
range: 0-310

.1.3.6.1.4.1.9.9.155.1.14.1.4

cSdslStucMinSnrMgn

This object specifies the minimum acceptable SNR margin.
If the noise margin falls below this level, the STU-C will
retrain. The value for this object must be in multiples of 10.
The specified value will be rounded do…

tenth dBInteger32r/w

Constraints:
range: 0-310

.1.3.6.1.4.1.9.9.155.1.14.1.5

cSdslStucOutputPwr

This object specifies the transmit power level used by
the STU-C. The value for this object must be in multiples
of 10. The specified value will be rounded down to the
nearest valid tenth dB level if the value is no…

tenth dBmInteger32r/w

Constraints:
range: 0-310

.1.3.6.1.4.1.9.9.155.1.14.1.6

cSdslShdslLineMaxRate

This object specifies the desired line rate at which the
G.shdsl STU-C will attempt to train.

bpsEnumerationr/w

Enumerated Values:

72000	r72000
136000	r136000
200000	r200000
264000	r264000
392000	r392000
520000	r520000
776000	r776000
784000	r784000
1032000	r1032000
1160000	r1160000
1544000	r1544000
1552000	r1552000
2056000	r2056000
2312000	r2312000
2376000	r2376000

.1.3.6.1.4.1.9.9.155.1.14.1.7

cSdslStucPsdMaskType

This object specifies the PSD mask type for the transceiver.
For all values of the cSdslShdslLineMaxRate, the symmetric PSD
masktype is selectable. Asymmetric mask is only selectable for
the following rates: 776000, …

Enumerationr/w

Enumerated Values:

1	symmetric
2	asymmetric

.1.3.6.1.4.1.9.9.155.1.14.1.8

cSdslStucAnnex

This object specifies the operating conditions for the port
of G.shdsl CO equipment . Annex A is optimized for conditions
typically encountered within the North American network,whereas
Annex B is optimized for condit…

Enumerationr/w

Enumerated Values:

1	annexA
2	annexB

.1.3.6.1.4.1.9.9.155.1.14.1.9

cSdslLineEquipmentType

This object specifies the type of the STU device ,either
STU-C or STU-R

Enumerationr/w

Enumerated Values:

1	stuR
2	stuC

.1.3.6.1.4.1.9.9.155.1.14.1.10

cSdslLineAutoRateEnable

This object specifies whether the device uses the rate
adaptive training mode.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.155.1.14.1.11

cSdslStucThresholdSnrMgn

This object specifies the SNR margin threshold. An
appropriate alarm should be generated when the difference
between the actual SNR and the SNR required to maintain BER
of 10E-7 is less than this value. The value fo…

tenth dBInteger32r/w

Constraints:
range: 0-310

.1.3.6.1.4.1.9.9.155.1.14.1.12

cSdslSturAnnex

This object specifies the operating conditions for the port
of G.shdsl CPE equipment. Annex A is optimized for conditions
typically encountered within the North American network,whereas
Annex B is optimized for condit…

Enumerationr/w

Enumerated Values:

1	annexA
2	annexB

.1.3.6.1.4.1.9.9.155.1.14.1.13

cSdslLineAlarmConfProfileTable

table

.1.3.6.1.4.1.9.9.155.1.15 · 1 row entry · 2 columns

Open in standard view

This table extends the adslLineAlarmConfProfileTable and
contains enterprise-specific SDSL line configuration information
pertaining to alarms.

cSdslLineAlarmConfProfileEntry entry .1.3.6.1.4.1.9.9.155.1.15.1

A configuration profile containing enterprise-specific SDSL
line configuration information pertaining to alarms

Indexes

ADSL-LINE-MIBadslLineAlarmConfProfileName

Column	Syntax	OID
cSdslStucThreshMinRate This object specifies the line rate threshold. When the agent observes the line rate fall below this value, an appropriate alarm should be generated. The default value for this object should be the value…	bpsInteger32r/w Constraints: `range: 0-310`	`.1.3.6.1.4.1.9.9.155.1.15.1.1`
cSdslStucThreshMinSnrMgn This object specifies the SNR margin threshold. When the agent observes the received SNR margin fall below this value, an appropriate alarm should be generated. If the agent implements the CISCO-ENTITY-A…	tenth dBInteger32r/w Constraints: `range: 0-310`	`.1.3.6.1.4.1.9.9.155.1.15.1.2`