cSdslSturCurrAtn
CISCO-SDSL-LINE-MIB ·
.1.3.6.1.4.1.9.9.155.1.3.1.10
Object
Measured difference in the total power transmitted by the peer STU-C and the total power received by this STU-R
Context
- MIB
- CISCO-SDSL-LINE-MIB
- OID
.1.3.6.1.4.1.9.9.155.1.3.1.10- Type
- column
- Access
- readonly
- Status
- current
- Units
- tenth dBm
- Parent
- cSdslSturPhysEntry
- Table
- cSdslSturPhysTable
- Siblings
- 10
Syntax
tenth dBm SNMPv2-SMIGauge32
- Source
- SNMPv2-SMIGauge32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cSdslSturInvSerialNumber This object specifies the vendor specific string that
identifies the vendor STU-R. | column | OctetString | .1.3.6.1.4.1.9.9.155.1.3.1.1 |
| cSdslSturCurrGainRev This object specifies gain applied to this STU-R's receiver.
This object deprecates by cSdslSturCurrGain and has
no specified range. | column | tenth dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.155.1.3.1.11 |
| cSdslSturInvVendorId This object specifies the vendor identifier assigned according
to T1.220 | column | OctetString | .1.3.6.1.4.1.9.9.155.1.3.1.2 |
| cSdslSturInvVersionNumber This object specifies the vendor specific version number of
the STU-R. | column | OctetString | .1.3.6.1.4.1.9.9.155.1.3.1.3 |
| cSdslSturState This object specifies the state of the STU-R transceiver. | column | Enumeration | .1.3.6.1.4.1.9.9.155.1.3.1.4 |
| cSdslSturDefect This object specifies any possible defects currently being
exhibited by the STU-R.
This object has the intention of supplementing ifOperStatus. | column | SdslStuxDefect | .1.3.6.1.4.1.9.9.155.1.3.1.5 |
| cSdslSturCurrRate This object specifies the rate the STU-R transceiver was
able to obtain following training. | column | bps Integer32 | .1.3.6.1.4.1.9.9.155.1.3.1.6 |
| cSdslSturCurrSnrMgn This object specifies the SNR margin as seen by this STU-R with
respect to its received signal. | column | tenth dB SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.155.1.3.1.7 |
| cSdslSturCurrGain deprecated This object specifies gain applied to this STU-R's receiver.
This object is deprecated by cSdslSturCurrGainRev which has
no specified range. | column | tenth dB Integer32 | .1.3.6.1.4.1.9.9.155.1.3.1.8 |
| cSdslSturCurrOutputPwr This object specifies the measured total output power
transmitted by this STU-R. This is the measurement that was
reported during the last activation sequence. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.155.1.3.1.9 |