CISCO-PFR-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

254

cpfrMCTable

table

.1.3.6.1.4.1.9.9.772.1.1 · 1 row entry · 32 columns

Open in standard view

This table lists the MC instances created by the system.

cpfrMCEntry entry .1.3.6.1.4.1.9.9.772.1.1.1

An entry describing the configuration and status of one PfR
MC.

A simple device may only support a single MC, where a more
sophisticate device may support more than one MC.

A peer SNMP entity m…

Indexes

cpfrMCIndex

Column Syntax OID

cpfrMCIndex

This object indicates an arbitrary integer-value that uniquely
identifies a PfR MC.

PfRMasterControllerIndex

Textual Convention: PfRMasterControllerIndex Unsigned32

Type Constraints:
range: 1..4294967295

.1.3.6.1.4.1.9.9.772.1.1.1.1

cpfrMCStorageType

This object specifies the memory realization of the row. The
following columnar objects are allowed to be writable when the
storageType of this entry is permanent(4):
cpfrMCMapIndex, cpfrMCKeepAliveTimer, cpfrMCMaxPref…

SNMPv2-TCStorageTyper/w

Textual Convention: SNMPv2-TCStorageType Enumeration

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

.1.3.6.1.4.1.9.9.772.1.1.1.2

cpfrMCRowStatus

This object specifies the status of a row in the MC table. The
following columnar objects must be valid in order to transition
the row to the active state:
None.

The following columnar objects can be mo…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.9.9.772.1.1.1.3

cpfrMCMapIndex

This object indicates a set of PfR policy map entries in
cpfrMapTable associated with the MC. A value of zero indicates
that there is no policy map associated with the MC and that the
values in the default policy shoul…

PfrMapIndexOrZeror/w

Textual Convention: PfrMapIndexOrZero Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.772.1.1.1.4

cpfrMCKeepAliveTimer

This object specifies the value of the PfR keepalive timer.
The MC sends keepalive packets to BRs to maintain connectivity
between the MC and the BR. If the MC does not receive keepalive
packets from a BR before the ke…

secondsUnsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.1.1.5

cpfrMCMaxPrefixTotal

This object specifies the maximum number of prefixes that a PfR
MC will monitor. Limiting the number of prefixes a MC will
monitor and learn reduces memory and system resource
consumption.

prefixesUnsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.1.1.6

cpfrMCMaxPrefixLearn

This object specifies the maximum number of prefixes that a PfR
MC will learn.

prefixesUnsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.1.1.7

cpfrMCEntranceLinksMaxUtil

This object specifies the maximum utilization threshold of
incoming traffic that can be transmitted over a PfR-managed
entrance link interface.

percentUnsigned32r/w

Constraints:
range: 1-100

.1.3.6.1.4.1.9.9.772.1.1.1.8

cpfrMCExitLinksMaxUtil

This object specifies the maximum utilization of outbound
traffic that can be transmitted over a PfR-managed exit
interface.

percentUnsigned32r/w

Constraints:
range: 1-100

.1.3.6.1.4.1.9.9.772.1.1.1.9

cpfrMCPortNumber

This object specifies a dynamic port number for communication
between a PfR MC and a PfR BR.

INET-ADDRESS-MIBInetPortNumberr/w

Textual Convention: INET-ADDRESS-MIBInetPortNumber Unsigned32

Type Constraints:
range: 0..65535

.1.3.6.1.4.1.9.9.772.1.1.1.10

cpfrMCTracerouteProbeDelay

This object specifies the time interval between traceroute
probe cycles.

millisecondsUnsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.1.1.11

cpfrMCRsvpPostDialDelay

This object specifies the delay before PfR returns the default
routing path to RSVP.

millisecondsUnsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.1.1.12

cpfrMCRsvpSignalingRetries

This object specifies the number of retries that RSVP will
query PfR for the alternate path.

retriesUnsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.1.1.13

cpfrMCNetflowExporter

This object specifies the name of PfR Netflow exporter.

SNMP-FRAMEWORK-MIBSnmpAdminStringr/w

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.772.1.1.1.14

cpfrMCAdminStatus

This object can be used to enable or disable PfR operation in
the system.

'enable'
Enable MC on the router.

'disable'
Disable MC on the router.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.9.9.772.1.1.1.15

cpfrMCOperStatus

This object indicates the operational status of PfR MC.

'active'
MC is active.

'inactive'
MC is not active.

Enumeration

Enumerated Values:

1	active
2	inactive

.1.3.6.1.4.1.9.9.772.1.1.1.16

cpfrMCConnStatus

This object indicates the state of the connection between MC
and BRs.

'success'
MC is successfully connected to at least one BR.

'closed'
MC is not connected to any BR.

Enumeration

Enumerated Values:

1	success
2	closed

.1.3.6.1.4.1.9.9.772.1.1.1.17

cpfrMCNumofBorderRouters

This object indicates the number of BRs that peer with the
MC.

border routersUnsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.1.1.18

cpfrMCNumofExits

This object indicates the total number of PfR external
interfaces configured on a MC.

exitsUnsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.1.1.19

cpfrMCLearnState

This object indicates the status of PfR learning operation.

'disable'
PfR learning mode is not enabled.

'started'
PfR is learning TCs.

'writing'
PfR is storing the l…

Enumeration

Enumerated Values:

1	disabled
2	started
3	writing
4	sleep
5	retry

.1.3.6.1.4.1.9.9.772.1.1.1.20

cpfrMCLearnStateTimeRemain

This object indicates time remaining in the current prefix
learning period measured in seconds.

secondsSNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.772.1.1.1.21

cpfrMCPrefixCount

This object indicates the total number of prefixes PfR is
monitoring.

prefixesSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.772.1.1.1.22

cpfrMCPrefixLearned

This object indicates the number of prefixes PfR has learned.

prefixesSNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.772.1.1.1.23

cpfrMCPrefixConfigured

This object indicates the number of configured prefixes PfR is
monitoring.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.772.1.1.1.24

cpfrMCPbrMet

This object indicates whether the PBR requirements have been
met. If PBR requirements are not met, the BRs cannot
communicate with each other over the internal interfaces and
cannot redirect traffic to each other using…

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.772.1.1.1.25

cpfrMCLoggingAdminStatus

This object specifies whether logging is enabled or not on PfR
MC.

'enable'
logging is enabled.

'disable'
logging is disabled.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.9.9.772.1.1.1.26

cpfrMCControlMode

This object specifies PfR MC control-mode.

'observe'
PfR doesn't control traffic classes, but observes them.

'control'
PfR controls traffic classes.

Enumerationr/w

Enumerated Values:

1	observe
2	control

.1.3.6.1.4.1.9.9.772.1.1.1.27

cpfrMCClear

This object specifies the clear operation that an MC should
perform. A read on this object will return the last successful
clear operation performed by the master controller.

'none'
No clear operation…

Enumerationr/w

Enumerated Values:

1	none
2	clearAll
3	clearAllPrefixes
4	clearAllBorders

.1.3.6.1.4.1.9.9.772.1.1.1.28

cpfrMCLastClearTime

This object indicates the value of sysUpTime the last time the
MC successfully performed a clear operation.

SNMPv2-TCTimeStamp

Textual Convention: SNMPv2-TCTimeStamp Unsigned32

.1.3.6.1.4.1.9.9.772.1.1.1.29

cpfrMCNotifisControl

This object specifies whether PfR notifications is enabled or
not
from PfR MC.

'enable'
notification is enabled.

'disable'
notification is disabled.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.9.9.772.1.1.1.30

cpfrMCChangeConfigType

This object indicates which of the following configuration is
changed.

'cpfrMCLoggingAdminStatus'
cpfrMCLoggingAdminStatus is changed.

'cpfrMCAdminStatus'
cpfrMCAdminStatus is changed…

Enumeration

Enumerated Values:

1	cpfrMCLoggingAdminStatus
2	cpfrMCAdminStatus
3	cpfrMCControlMode
4	cpfrMCClear

.1.3.6.1.4.1.9.9.772.1.1.1.31

cpfrMCChangeConfigValue

This object indicates the value to which the type of
configuration specified in cpfrMCChangeConfigType, is changed.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.772.1.1.1.32

cpfrMapTable

table

.1.3.6.1.4.1.9.9.772.1.2 · 1 row entry · 40 columns

Open in standard view

This table lists the PfR map instances created by the system.
          
This table has a sparse expansion dependent relationship on
cpfrMCTable, containing one or more rows for each cpfrMCEntry.

cpfrMapEntry entry .1.3.6.1.4.1.9.9.772.1.2.1

An entry describing the configuration of one PfR map.

A device creates a row in a cpfrMapTable when it specifies a
PfR map. Likewise, such a device destroys a row in the
cpfrBRTable when removing a PfR ma…

Indexes

cpfrMapIndex cpfrMapPolicyIndex

Column Syntax OID

cpfrMapIndex

This object indicates an arbitrary integer-value that uniquely
identifies a set of PfR policy maps.

PfrMapIndex

Textual Convention: PfrMapIndex Unsigned32

Type Constraints:
range: 1..4294967295

.1.3.6.1.4.1.9.9.772.1.2.1.1

cpfrMapPolicyIndex

This object indicates an arbitrary integer-value that, in
combination with cpfrMapIndex, uniquely identifies a PfR policy
map.

PfrMapPolicyIndex

Textual Convention: PfrMapPolicyIndex Unsigned32

Type Constraints:
range: 1..4294967295

.1.3.6.1.4.1.9.9.772.1.2.1.2

cpfrMapStorageType

This object specifies the memory realization of the row. The
following columnar objects are allowed to be writable when the
storageType of this entry is permanent(4):
cpfrMapIndex, cpfrMapPolicyIndex, cpfrMapStorageTyp…

SNMPv2-TCStorageTyper/w

Textual Convention: SNMPv2-TCStorageType Enumeration

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

.1.3.6.1.4.1.9.9.772.1.2.1.3

cpfrMapRowStatus

This object specifies the status of a row in the PfR map table.
The following columnar objects must be valid in order to
transition the row to the active state:
cpfrMapName.

The following columnar object…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.9.9.772.1.2.1.4

cpfrMapName

This object specifies the name of a PfR map.

SNMP-FRAMEWORK-MIBSnmpAdminStringr/w

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.772.1.2.1.5

cpfrMapBackoffMinTimer

This object specifies the minimum value for the backoff timer.
The backoff timer is used to configure a PfR map to set the
transition period for which the MC holds an out-of-policy
prefix.

secondsUnsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.2.1.6

cpfrMapBackoffMaxTimer

This object specifies the maximum value for the backoff timer.
If the maximum timer expires and all PfR-managed exits are
out-of-policy, PfR will install the best available exit and
reset the minimum timer.

secondsUnsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.2.1.7

cpfrMapBackoffStepTimer

This object specifies the time period value for the step timer.
PfR users the step timer to add time to the out-of-policy
waiting period each time the backoff timer expires and PfR is
unable to find an in-policy exit. …

secondsUnsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.2.1.8

cpfrMapDelayType

This object specifies the delay type of a PfR map. It is used
to set the delay threshold as a relative percentage or as an
absolute value for match criteria.

PfrMetricPolicyTyper/w

Textual Convention: PfrMetricPolicyType Enumeration

Type Values:

1	relative
2	threshold

.1.3.6.1.4.1.9.9.772.1.2.1.9

cpfrMapDelayRelativePercent

This object specifies a relative delay threshold based on a
comparison of short-term and long-term delay percentages. The
value of this object is valid if the corresponding value of
cpfrMapDelayType is set to 'relative…

tenths of percentUnsigned32r/w

Constraints:
range: 1-1000

.1.3.6.1.4.1.9.9.772.1.2.1.10

cpfrMapDelayThresholdMax

This object specifies the absolute maximum delay time. The
value of this object is valid if the corresponding value of
cpfrMapDelayType is set to 'threshold'.

millisecondsUnsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.2.1.11

cpfrMapHolddownTimer

This object specifies the route dampening time period.
It is used to configure the prefix route dampening timer for
the minimum period of time in which a new exit must be used
before an alternate exit can be selected.

secondsUnsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.2.1.12

cpfrMapPrefixForwardInterface

This object specifies whether or not a null forwarding
interface has been configured. This interface is always
up and can never forward or receive traffic; encapsulation
always fails. Null interfaces are used as a l…

CISCO-TCInterfaceIndexOrZeror/w

Textual Convention: CISCO-TCInterfaceIndexOrZero Integer32

Type Constraints:
range: 0..2147483647

.1.3.6.1.4.1.9.9.772.1.2.1.13

cpfrMapJitterThresholdMax

This object specifies the maximum tolerable jitter value
permitted on an exit link.

millisecondsUnsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.2.1.14

cpfrMapLinkGroupName

This object specifies the primary link group to be used by PfR
to select an exit. It allows a group of exit links to be
defined as a preferred set of links for PfR to use when
optimizing TCs specified in a PfR policy.

SNMP-FRAMEWORK-MIBSnmpAdminStringr/w

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.772.1.2.1.15

cpfrMapFallbackLinkGroupName

This object specifies a fallback link group to be used if all
the exits in the primary link group are out-of-policy (OOP).

SNMP-FRAMEWORK-MIBSnmpAdminStringr/w

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.772.1.2.1.16

cpfrMapLossType

This object specifies the loss type configuration used by PfR.
It specifies the relative percentage or maximum number of
packets that PfR will permit to be lost during transmission
on an exit link.

PfrMetricPolicyTyper/w

Textual Convention: PfrMetricPolicyType Enumeration

Type Values:

1	relative
2	threshold

.1.3.6.1.4.1.9.9.772.1.2.1.17

cpfrMapLossRelativeAvg

This object specifies a relative percentage of packet loss
based on a comparison of short-term and long-term packet loss
percentages. The value of this object is valid if the
corresponding value of cpfrMapLossType is s…

tenths of percentUnsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.2.1.18

cpfrMapLossThresholdMax

This object specifies absolute packet loss based on packets per
million (PPM). The value of this object is valid if the
corresponding value of cpfrMapLossType is set to 'threshold'.

packets-per-millionUnsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.2.1.19

cpfrMapModeMonitor

This object specifies how a PfR MC using this PfR map should
monitor the TCs.

'active'
Enable active monitoring.

'activethrougput'
Enable active monitoring with throughput data from …

Enumerationr/w

Enumerated Values:

1	active
2	activeThroughput
3	both
4	fast
5	passive

.1.3.6.1.4.1.9.9.772.1.2.1.20

cpfrMapModeRouteOpts

This object specifies how a PfR MC using this PfR map should
control the TCs.

'control'
Monitor and report performance data and use the data to
make route changes that will optimize performance.
…

Enumerationr/w

Enumerated Values:

1	control
2	observe
3	metric

.1.3.6.1.4.1.9.9.772.1.2.1.21

cpfrMapRouteMetricBgpLocalPref

This object specifies the BGP local preference for PfR
controlled routes. The value of this object is valid if the
corresponding value of cpfrMapModeRouteOpts is set to 'metric'.
The value 0 is not a valid BGP local pr…

Unsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.2.1.22

cpfrMapRouteMetricEigrpTagCommunity

This object specifies the community value to an EIGRP route
under PfR control. The value of this object is valid if the
corresponding value of cpfrMapModeRouteOpts is set to 'metric'.
The value 0 is not a valid EIGRP …

Unsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.2.1.23

cpfrMapRouteMetricStaticTag

This object specifies the tag to a static route under PfR
control. The value of this object is valid if the
corresponding value of cpfrMapModeRouteOpts is set to 'metric'.
The value 0 is not a valid Static tag. Confi…

Unsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.2.1.24

cpfrMapModeSelectExitType

This object specifies how a PfR MC using this PfR map should
select an exit based on performance or policy.

'best'
Select the best exit based on performance or policy.

'good'
Select t…

Enumerationr/w

Enumerated Values:

1	best
2	good

.1.3.6.1.4.1.9.9.772.1.2.1.25

cpfrMapMOSThresholdMin

This object specifies a threshold MOS value that represents a
minimum voice quality for exit link utilization.

Unsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.2.1.26

cpfrMapMOSPercentage

This object specifies a percentage value that is compared
with the percentage of MOS samples that are below the MOS
threshold. The number of MOS samples over a period of time that
are below the threshold MOS value are…

percentUnsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.2.1.27

cpfrMapNextHopAddressType

This object specifies the address type of the address specified
as the next hop when PfR is used for sinkhole filtering.

INET-ADDRESS-MIBInetAddressTyper/w

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.9.9.772.1.2.1.28

cpfrMapNextHopAddress

This object specifies the next hop address to which PfR
forwards packets for matching prefixes. The prefixes that are
forwarded to the next hop address are specified by an access
list configured in a match clause on th…

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.772.1.2.1.29

cpfrMapPeriodicTimer

This object specifies the periodic timer that PfR uses to
select the best exit for the matched TCs. When this timer
expires, PfR automatically selects the best exit,
irrespective of whether the current exit is in-polic…

secondsUnsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.2.1.30

cpfrMapActiveProbeFrequency

This object specifies the frequency of active probes configured
under a PfR map.

secondsUnsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.2.1.31

cpfrMapActiveProbePackets

This object specifies the number of probe packets generated
for each active probe cycle.

packetsUnsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.2.1.32

cpfrMapTracerouteReporting

This object enables continuous and policy-based traceroute
probing. Traceroute probing allows prefix performance to be
measured on a hop-by-hop basis. Delay, loss, and
reachability measurements are gathered for each h…

Bitsr/w

Enumerated Values:

0	none
1	delay
2	loss
3	unreachable

.1.3.6.1.4.1.9.9.772.1.2.1.33

cpfrMapUnreachableType

This object specifies the unreachable type configuration used
by PfR. It is used to set the relative percentage or the
absolute maximum number of unreachable hosts, based on flows
per million (fpm), that PfR will per…

PfrMetricPolicyTyper/w

Textual Convention: PfrMetricPolicyType Enumeration

Type Values:

1	relative
2	threshold

.1.3.6.1.4.1.9.9.772.1.2.1.34

cpfrMapUnreachableRelativeAvg

This object specifies a relative percentage of unreachable
hosts. The relative unreachable host percentage is based on a
comparison of short-term and long-term measurements. The
short-term measurement reflects the per…

tenths of percentSNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.772.1.2.1.35

cpfrMapUnreachableThresholdMax

This object specifies the absolute maximum number of
unreachable hosts based on flows per million.
The value of this object is valid if the corresponding
value of cpfrMapUnreachableType is set to 'threshold'.

flows per millionUnsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.2.1.36

cpfrMapRoundRobinResolver

This object specifies whether the round robin resolver is
enabled or disabled.

'enable'
Round robin resolver is enabled.

'disable'
Round robin resolver is disabled.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.9.9.772.1.2.1.37

cpfrMapEventNotifCtrlType

This object specifies the event notification control type
configuration used by PfR. It is used to set the relative
percentage or the absolute threshold value for
cpfrMapEventNotifCtrlThreshold object.

PfrMetricPolicyTyper/w

Textual Convention: PfrMetricPolicyType Enumeration

Type Values:

1	relative
2	threshold

.1.3.6.1.4.1.9.9.772.1.2.1.38

cpfrMapEventNotifCtrlThreshold

This object specifies the absolute event counter threshold or
relative percentage threshold used by PfR to throttle the
generation of cpfrTCInpolicyThresholdBelowNotify and
cpfrTCPrimaryThresholdBelowNotify.
…

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.772.1.2.1.39

cpfrMapEventTCCount

This object specifies the current absolute number of traffic
classes, whose state are 'default' or 'oopolicy' specified by
cpfrTCStatus.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.772.1.2.1.40

cpfrMatchTable

table

.1.3.6.1.4.1.9.9.772.1.3 · 1 row entry · 9 columns

Open in standard view

This table lists the match clause instances created by the
system. 
          
This table has an expansion dependent relationship on
cpfrMapTable, containing zero or more rows for each
cpfrMapEntry.

cpfrMatchEntry entry .1.3.6.1.4.1.9.9.772.1.3.1

An entry describing a match clause PfR uses.

A peer SNMP entity may create a match criterion by setting an
instance of cpfrMatchStatus to 'createAndWait' or 'createAndGo'.
Observe that an implementation th…

Indexes

cpfrMapIndex cpfrMapPolicyIndex

Column Syntax OID

cpfrMatchValid

This object specifies which of those objects are valid. When
a user is configuring a match clause, the corresponding bit
should also be set to true in this object. The following list
shows different types of match cla…

Bitsr/w

Enumerated Values:

0	accessList
1	prefixList
2	learn
3	trafficClassACL
4	nbarApplicationList
5	trafficClassPfx

.1.3.6.1.4.1.9.9.772.1.3.1.1

cpfrMatchAddrAccessList

This object specifies the access list used to manually
configure a traffic class that matches destination prefixes
in an access list used in a PfR map.

SNMP-FRAMEWORK-MIBSnmpAdminStringr/w

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.772.1.3.1.2

cpfrMatchAddrPrefixList

This object specifies the prefix list used to manually
configure a traffic class that matches destination prefixes
in a prefix list.

SNMP-FRAMEWORK-MIBSnmpAdminStringr/w

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.772.1.3.1.3

cpfrMatchAddrPrefixInside

This object specifies whether or not the prefixes learned by
PfR are within the internal network.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.772.1.3.1.4

cpfrMatchLearnMode

This object specifies the mode by which PfR should learn
prefixes.

'Delay'
PfR learns prefixes based on the highest delay.

'Inside'
PfR learns the prefixes inside the network.
…

Enumerationr/w

Enumerated Values:

1	delay
2	inside
3	throughput
4	list

.1.3.6.1.4.1.9.9.772.1.3.1.5

cpfrMatchLearnListName

This object specifies the learn list name used by PfR for
learning prefixes. This object is valid when the corresponding
cpfrMatchLearnMode object is set to 'list'.

SNMP-FRAMEWORK-MIBSnmpAdminStringr/w

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.772.1.3.1.6

cpfrMatchTCNbarListName

This object specifies that PfR is to profile traffic
destined for prefixes defined in an IP prefix list that match
one or more NBAR applications. The applications are predefined
with a protocol identifier. This object…

SNMP-FRAMEWORK-MIBSnmpAdminStringr/w

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.772.1.3.1.7

cpfrMatchTCNbarApplPfxList

This object specifies the prefix list to be used by PfR to
filter traffic that is learned based on NBAR applications.

SNMP-FRAMEWORK-MIBSnmpAdminStringr/w

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.772.1.3.1.8

cpfrMatchTCPfxInside

This object specifies whether or not the prefixes filtered by
the prefix list is inside the internal network.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.772.1.3.1.9

cpfrResolveTable

table

.1.3.6.1.4.1.9.9.772.1.4 · 1 row entry · 8 columns

Open in standard view

This table lists the resolver instances created by the
system.
          
This table has an expansion dependent relationship on
cpfrMapTable, containing zero or more rows for each
cpfrMapEntry.

cpfrResolveEntry entry .1.3.6.1.4.1.9.9.772.1.4.1

An entry in the cpfrResolveTable describes a policy metric
and its priority relative to other metrics if multiple metrics
are configured for the default policy or under a PfR map.

A peer SNMP entity may cre…

Indexes

cpfrResolveIndex

Column Syntax OID

cpfrResolveIndex

This object indicates an arbitrary integer-value that uniquely
identifies a PfR resolver.

Unsigned32

Constraints:
range: 1-4294967295

.1.3.6.1.4.1.9.9.772.1.4.1.1

cpfrResolveStorageType

This object specifies the memory realization of the row. The
following columnar objects are allowed to be writable when the
storageType of this entry is permanent(4):
cpfrResolvePolicyType, cpfrResolveVariance,
c…

SNMPv2-TCStorageTyper/w

Textual Convention: SNMPv2-TCStorageType Enumeration

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

.1.3.6.1.4.1.9.9.772.1.4.1.2

cpfrResolveRowStatus

This object specifies the status of a row in the resolver
table. The following columnar objects must be valid in order to

transition the row to the active state:
cpfrMCResolvePriority, cpfrResolvePolicy…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.9.9.772.1.4.1.3

cpfrResolvePriority

This object indicates the priority of the resolver.

Unsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.4.1.4

cpfrResolvePolicyType

This object indicates the type of this resolver policy.

PfrResolvePolicyTyper/w

Textual Convention: PfrResolvePolicyType Enumeration

Type Values:

0	none
1	cost
2	delay
3	jitter
4	loss
5	mos
6	range
7	utilization

.1.3.6.1.4.1.9.9.772.1.4.1.5

cpfrResolveVariance

This object specifies the allowable variance for the policy,
as a percentage.

Unsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.4.1.6

cpfrResolveMapIndex

This object refers to the map Index of PfR map under which
this resolver was configured.

PfrMapIndexOrZeror/w

Textual Convention: PfrMapIndexOrZero Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.772.1.4.1.7

cpfrResolveMapPolicyIndex

This object refers to PfR map policy index of PfR map under
which this resolver was configured.

PfrMapPolicyIndexr/w

Textual Convention: PfrMapPolicyIndex Unsigned32

Type Constraints:
range: 1..4294967295

.1.3.6.1.4.1.9.9.772.1.4.1.8

cpfrLearnTable

table

.1.3.6.1.4.1.9.9.772.1.5 · 1 row entry · 11 columns

Open in standard view

This table lists the PfR learn instances created by the system.
          
This table has a one-to-one relationship with cpfrMCTable,
containing zero or more rows for each cpfrMCEntry.

cpfrLearnEntry entry .1.3.6.1.4.1.9.9.772.1.5.1

An entry in the cpfrLearnTable describes the configuration
and status of a PfR learning policy.

A device creates a row in a cpfrLearnTable when PfR learn is
enabled. Likewise, such a device destroys a row …

Indexes

cpfrMCIndex

Column Syntax OID

cpfrLearnAggregationType

This object specifies how a MC aggregates learned
prefixes based on traffic type.

'bgp'
The bgp keyword configures aggregation based on entries in
the BGP routing table.

'nonBgp'
T…

Enumerationr/w

Enumerated Values:

1	bgp
2	nonBgp
3	prefixLength

.1.3.6.1.4.1.9.9.772.1.5.1.1

cpfrLearnAggregationPrefixLen

This object configures aggregation based on the specified
prefix length.

bitsUnsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.5.1.2

cpfrLearnMethod

This object specifies the method by which PfR learns prefixes.

'delay'
Learn prefixes with the highest round trip delay.

'throughput'
Learn prefixes with the highest throughput.
…

Bitsr/w

Enumerated Values:

0	delay
1	throughput
2	insideBgp

.1.3.6.1.4.1.9.9.772.1.5.1.3

cpfrLearnExpireType

This object specifies the length of time that the learned
prefixes are kept in the central policy database.

'session'
Configures a session-based expiration timer.

'time'
Configures a…

Enumerationr/w

Enumerated Values:

1	session
2	time

.1.3.6.1.4.1.9.9.772.1.5.1.4

cpfrLearnExpireSessionNum

This object configures a session-based expiration timer. A
number from 1 to 65535 can be entered. Each increment
represents one monitoring period. The object is valid when
cpfrLearnExpireType is configured with session.

monitoring periodsUnsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.5.1.5

cpfrLearnExpireTime

This object configures a time-based expiration timer.

minutesUnsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.5.1.6

cpfrLearnMonitorPeriod

This object specifies the time period over which a PfR MC
learns traffic flows.

minutesUnsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.5.1.7

cpfrLearnPeriodInterval

This object specifies the time interval between prefix
monitoring periods.

minutesUnsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.5.1.8

cpfrLearnPrefixesNumber

This object specifies the maximum number of prefixes PfR
can learn.

prefixesUnsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.5.1.9

cpfrLearnAggAccesslistName

This object specifies a PfR access list to define criteria
which PfR uses to aggregate TCs.

SNMP-FRAMEWORK-MIBSnmpAdminStringr/w

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.772.1.5.1.10

cpfrLearnFilterAccessListName

This object specifies an access list used to filter TCs
learned by PfR.

SNMP-FRAMEWORK-MIBSnmpAdminStringr/w

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.772.1.5.1.11

cpfrLearnListTable

table

.1.3.6.1.4.1.9.9.772.1.6 · 1 row entry · 11 columns

Open in standard view

This table lists the learn lists created by the system.
          
This table has an expansion dependent relationship on
cpfrLearnTable, containing zero or more rows for each
cpfrLearnEntry.

cpfrLearnListEntry entry .1.3.6.1.4.1.9.9.772.1.6.1

An entry in the cpfrLearnListTable describes the configuration
and status of a PfR learn list.

A peer SNMP entity may create a learn list by setting an
instance of cpfrLearnListRowStatus to 'createAndWait' …

Indexes

cpfrMCIndex cpfrLearnListIndex

Column Syntax OID

cpfrLearnListIndex

This object indicates an arbitrary integer-value that uniquely
identifies a PfR learn list.

PfrLearnListIndex

Textual Convention: PfrLearnListIndex Unsigned32

Type Constraints:
range: 1..4294967295

.1.3.6.1.4.1.9.9.772.1.6.1.1

cpfrLearnListStorageType

This object specifies the memory realization of the row. The
following columnar objects are allowed to be writable when the
storageType of this entry is permanent(4):
cpfrLearnListReferenceName, cpfrLearnListSequenceNu…

SNMPv2-TCStorageTyper/w

Textual Convention: SNMPv2-TCStorageType Enumeration

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

.1.3.6.1.4.1.9.9.772.1.6.1.2

cpfrLearnListRowStatus

This object specifies the status of a row in the learn list
table. The following columnar objects must be valid in order to
transition the row to the active state:
cpfrLearnListReferenceName, cpfrLearnListSequenceNum.
…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.9.9.772.1.6.1.3

cpfrLearnListReferenceName

This object specifies the reference name of a learn list.

SNMP-FRAMEWORK-MIBSnmpAdminStringr/w

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.772.1.6.1.4

cpfrLearnListSequenceNum

This object specifies the sequence number representing a
sequence that is used to determine the order in which PfR
applies learn list criteria.

Unsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.6.1.5

cpfrLearnListMethod

This object specifies how PfR learns prefixes.

'delay'
Learn prefixes with the highest round trip delay.

'througput'
Learn prefixes with the highest throughput.

'rsvp'
…

Bitsr/w

Enumerated Values:

0	delay
1	throughput
2	rsvp

.1.3.6.1.4.1.9.9.772.1.6.1.6

cpfrLearnListAclName

This object specifies the name of the access list to be used
by the PfR learn list.

SNMP-FRAMEWORK-MIBSnmpAdminStringr/w

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.772.1.6.1.7

cpfrLearnListPfxName

This object specifies the name of the prefix list to be used
by the PfR learn list.

SNMP-FRAMEWORK-MIBSnmpAdminStringr/w

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.772.1.6.1.8

cpfrLearnListPfxInside

This object specifies whether PfR should learn prefixes that
are inside the network.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.772.1.6.1.9

cpfrLearnListNbarAppl

This object specifies a set of protocols in the
cpfrNbarApplListTable that will be used by PfR to learn TCs.

SNMP-FRAMEWORK-MIBSnmpAdminStringr/w

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.772.1.6.1.10

cpfrLearnListFilterPfxName

This object specifies the name of the prefix list to be used
as a filter for traffic classes to be learned by this
learn list.

SNMP-FRAMEWORK-MIBSnmpAdminStringr/w

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.772.1.6.1.11

cpfrActiveProbeTable

table

.1.3.6.1.4.1.9.9.772.1.7 · 1 row entry · 18 columns

Open in standard view

This table lists the active probe instances created by the
system.
          
This table has an expansion dependent relationship on
cpfrMapTable, containing zero or more rows for each
cpfrMapEntry.

cpfrActiveProbeEntry entry .1.3.6.1.4.1.9.9.772.1.7.1

An entry in the cpfrActiveProbeTable describes the
configuration and status that directs how PfR active-probes
targets.

A peer SNMP entity may create an active probe by setting an
instance of cpfrActivePro…

Indexes

cpfrActiveProbeIndex

Column Syntax OID

cpfrActiveProbeIndex

This object indicates an arbitrary integer-value that uniquely
identifies an active probe entity in a PfR policy map.

Unsigned32

Constraints:
range: 1-4294967295

.1.3.6.1.4.1.9.9.772.1.7.1.1

cpfrActiveProbeStorageType

This object specifies the memory realization of the row. The
following columnar objects are allowed to be writable when the
storageType of this entry is permanent(4):
pfrActiveProbeType, cpfrActiveProbeTargetAddressTyp…

SNMPv2-TCStorageTyper/w

Textual Convention: SNMPv2-TCStorageType Enumeration

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

.1.3.6.1.4.1.9.9.772.1.7.1.2

cpfrActiveProbeRowStatus

This object specifies the status of row in the active probe
table. The following columnar objects must be valid in order to

transition the row to the active state:
cpfrActiveProbeType,
cpfrActiveProbeTa…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.9.9.772.1.7.1.3

cpfrActiveProbeType

This object specifies the Type of probe.

'echo'
Use Internet Control Message Protocol (ICMP) echo messages
(ping) for active probe.

'jitter'
Use jitter messages for active probe.
…

Enumerationr/w

Enumerated Values:

1	echo
2	jitter
3	tcpConn
4	udpEcho

.1.3.6.1.4.1.9.9.772.1.7.1.4

cpfrActiveProbeTargetAddressType

This object specifies the type of a target IP address of a
prefix to be monitored using the specified type of probe.

INET-ADDRESS-MIBInetAddressTyper/w

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.9.9.772.1.7.1.5

cpfrActiveProbeTargetAddress

This object specifies target IP address of a prefix to be
monitored using the specified type of probe.

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.772.1.7.1.6

cpfrActiveProbeTargetPortNumber

This object specifies the destination port number for the
active probe.

CISCO-TCCiscoPortr/w

Textual Convention: CISCO-TCCiscoPort Integer32

Type Constraints:
range: 0..65535

.1.3.6.1.4.1.9.9.772.1.7.1.7

cpfrActiveProbePfrMapIndex

This object specifies the index of the PfR policy map on
which the active probe clause is configured.

PfrMapIndexOrZeror/w

Textual Convention: PfrMapIndexOrZero Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.772.1.7.1.8

cpfrActiveProbeDscpValue

This object indicates the Differentiated Services Code Point
(DSCP) value.

Unsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.7.1.9

cpfrActiveProbeCodecName

This object specifies the codec value used for Mean Opinion
Score (MOS) calculation and only used with the jitter probe
type. The codec values must be one of the following,

'g711alaw'
G.711 A Law 6400…

Enumerationr/w

Enumerated Values:

1	g711alaw
2	g711ulaw
3	g729a

.1.3.6.1.4.1.9.9.772.1.7.1.10

cpfrActiveProbeMapIndex

This object specifies the index of a PfR map under which this
active probe was configured.

PfrMapIndexOrZeror/w

Textual Convention: PfrMapIndexOrZero Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.772.1.7.1.11

cpfrActiveProbeMapPolicyIndex

This object specifies the index of a PfR map policy under
which this active probe was configured.

PfrMapIndexOrZeror/w

Textual Convention: PfrMapIndexOrZero Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.772.1.7.1.12

cpfrActiveProbeAdminStatus

This object specifies whether the probe is assigned to
a prefix or not, or is a forced probe configured on a PfR map.

'assigned'
Active probe is assigned.

'unassigned'
Active probe is…

Enumerationr/w

Enumerated Values:

1	assigned
2	unassigned
3	forced

.1.3.6.1.4.1.9.9.772.1.7.1.13

cpfrActiveProbeOperStatus

This object indicates the current status of an active probe.

'running'
Active probe is running.

'notrunning'
Active probe is not running.

Enumeration

Enumerated Values:

1	running
2	notRunning

.1.3.6.1.4.1.9.9.772.1.7.1.14

cpfrActiveProbeAssignedPfxAddressType

This object indicates the type of assigned prefix address.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.9.9.772.1.7.1.15

cpfrActiveProbeAssignedPfxAddress

This object indicates the assigned prefix address.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.772.1.7.1.16

cpfrActiveProbeAssignedPfxLen

This object indicates the length of the assigned prefix
address.

Unsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.7.1.17

cpfrActiveProbeMethod

This object indicates how an active probe is entered into
the PfR system.

'learned'
Active probe is triggered when PfR learns TCs.

'configured'
Active probe is forced by CLI command.

Enumeration

Enumerated Values:

1	learned
2	configured

.1.3.6.1.4.1.9.9.772.1.7.1.18

cpfrBRTable

table

.1.3.6.1.4.1.9.9.772.1.8 · 1 row entry · 11 columns

Open in standard view

This table lists the border router (BR) instances created by
the system.
          
This table has an expansion dependent relationship on the  
cpfrMCTable, containing zero or more rows for each cpfrMCEntry.

cpfrBREntry entry .1.3.6.1.4.1.9.9.772.1.8.1

An entry in the cpfrBRTable describes the configuration and
status of one PfR BR.

A peer SNMP entity may create a BR by setting an instance of
cpfrBRRowStatus to 'createAndWait' or 'createAndGo'.
Observe t…

Indexes

cpfrMCIndex cpfrBRIndex

Column Syntax OID

cpfrBRIndex

This object indicates an arbitrary integer-value that uniquely
identifies a PfR BR.

PfrBorderRouterIndex

Textual Convention: PfrBorderRouterIndex Unsigned32

Type Constraints:
range: 1..4294967295

.1.3.6.1.4.1.9.9.772.1.8.1.1

cpfrBRStorageType

This object specifies the memory realization of the row. The
following columnar objects are allowed to be writable
when the storageType of this entry is permanent(4):
cpfrBRAddressType, cpfrBRAddress, cpfrBRKeyName.

SNMPv2-TCStorageTyper/w

Textual Convention: SNMPv2-TCStorageType Enumeration

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

.1.3.6.1.4.1.9.9.772.1.8.1.2

cpfrBRRowStatus

This object specifies the status of a row in the BR table. The
following columnar objects must be valid in order to transition
the row to the active state:
None.

The following columnar objects can be mo…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.9.9.772.1.8.1.3

cpfrBRAddressType

This object specifies the IP address type of a PfR BR.

INET-ADDRESS-MIBInetAddressTyper/w

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.9.9.772.1.8.1.4

cpfrBRAddress

This object specifies the IP address of a PfR BR

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.772.1.8.1.5

cpfrBRKeyName

This object specifies the key used to authenticate
communication between the BR and the MC. The authentication
key must be specified during the initial configuration to
establish communication, but is not required to…

SNMP-FRAMEWORK-MIBSnmpAdminStringr/w

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.772.1.8.1.6

cpfrBROperStatus

This object indicates the operational status of PfR BR.

'active'
BR is active.

'inactive'
BR is inactive.

Enumerationr/w

Enumerated Values:

1	active
2	inactive

.1.3.6.1.4.1.9.9.772.1.8.1.7

cpfrBRConnStatus

This object indicates the connection status between BR and MC.

'up'
BR is successfully connected to the MC.

'down'
BR is not connected to the MC.

Enumeration

Enumerated Values:

1	up
2	down

.1.3.6.1.4.1.9.9.772.1.8.1.8

cpfrBRUpTime

This object indicates the length of time that the connection
with the MC has been up.

SNMPv2-SMITimeTicks

Textual Convention: SNMPv2-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.772.1.8.1.9

cpfrBRConnFailureReason

This object indicates the reason why the connection status
between the BR and MC fails.

'versionmismatch'
The software version between MC and BR does not match.

'none'
No failure reas…

Enumeration

Enumerated Values:

1	versionMismatch
2	none
3	authFailure
4	socketError
5	timerExpired

.1.3.6.1.4.1.9.9.772.1.8.1.10

cpfrBRAuthFailCount

This object indicates the number of authentication failures
between the MC and the BR.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.772.1.8.1.11

cpfrExitTable

table

.1.3.6.1.4.1.9.9.772.1.9 · 1 row entry · 51 columns

Open in standard view

This table lists the PfR exit instances created by the system.
          
This table has an expansion dependent relationship on the  
cpfrBRTable, containing zero or more rows for each
cpfrBREntry.

cpfrExitEntry entry .1.3.6.1.4.1.9.9.772.1.9.1

An entry in the cpfrExitTable describes the configuration and
status of one PfR monitored/controlled exit.

A peer SNMP entity may create an exit for PfR BR by setting an
instance of cpfrLinkGroupRowStatus t…

Indexes

cpfrMCIndex cpfrBRIndex cpfrExitIndex

Column Syntax OID

cpfrExitIndex

This object indicates an arbitrary integer-value that uniquely
identifies a PfR monitored/controlled exit.

PfrExitIndex

Textual Convention: PfrExitIndex Unsigned32

Type Constraints:
range: 1..4294967295

.1.3.6.1.4.1.9.9.772.1.9.1.1

cpfrExitStorageType

This object specifies the memory realization of the row. The
following columnar objects are allowed to be writable
when the storageType of this entry is permanent(4):
cpfrExitName, cpfrExitType, cpfrDowngradeBgpCommun…

SNMPv2-TCStorageTyper/w

Textual Convention: SNMPv2-TCStorageType Enumeration

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

.1.3.6.1.4.1.9.9.772.1.9.1.2

cpfrExitRowStatus

This object specifies the status of a row in the exit table.
The following columnar objects must be valid in order to
transition the row to the active state:
cpfrExitName, cpfrExitType.

The following col…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.9.9.772.1.9.1.3

cpfrExitName

This object specifies the name of a PfR controlled interface
on a BR.

SNMP-FRAMEWORK-MIBSnmpAdminStringr/w

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.772.1.9.1.4

cpfrExitType

This object specifies the exit type.

'internal'
The interface is an internal interface. Internal interfaces
are used for communication between BRs.

'external'
The interface is an external i…

Enumerationr/w

Enumerated Values:

1	internal
2	external

.1.3.6.1.4.1.9.9.772.1.9.1.5

cpfrDowngradeBgpCommunity

This object specifies a BGP prepend community number attached
to an inside prefix BGP advertisement from the network to
another autonomous system. The BGP prepend community will
increase the number of autonomous system…

Unsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.9.1.6

cpfrExitMaxUtilRxType

This object specifies the maximum utilization configuration
type for incoming traffic over a single PfR exit.

PfrMetricPolicyTyper/w

Textual Convention: PfrMetricPolicyType Enumeration

Type Values:

1	relative
2	threshold

.1.3.6.1.4.1.9.9.772.1.9.1.7

cpfrExitMaxUtilRxAbsolute

This object specifies the maximum utilization on a PfR managed
entrance link to an absolute value.

KbpsUnsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.9.1.8

cpfrExitMaxUtilRxPercentage

This object specifies the maximum utilization on a PfR managed
entrance link to a bandwidth percentage.

percentUnsigned32r/w

Constraints:
range: 1-100

.1.3.6.1.4.1.9.9.772.1.9.1.9

cpfrExitMaxUtilTxType

This object specifies the maximum utilization configuration
type for traffic over a single PfR managed exit.

PfrMetricPolicyTyper/w

Textual Convention: PfrMetricPolicyType Enumeration

Type Values:

1	relative
2	threshold

.1.3.6.1.4.1.9.9.772.1.9.1.10

cpfrExitMaxUtilTxAbsolute

This object indicates the maximum utilization on a PfR managed
exit link to an absolute value.

KbpsUnsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.9.1.11

cpfrExitMaxUtilTxPercentage

This object specifies the maximum utilization on a PfR
managed exit link to a bandwidth percentage.

percentUnsigned32r/w

Constraints:
range: 1-100

.1.3.6.1.4.1.9.9.772.1.9.1.12

cpfrExitCostCalcMethod

This object indicates how the fee for a particular exit is
calculated.

'combined'
Specifies billing based on combined egress and ingress
rollup samples.

'separate'
Specifies billin…

Enumerationr/w

Enumerated Values:

1	combined
2	separate
3	sum

.1.3.6.1.4.1.9.9.772.1.9.1.13

cpfrExitCostDiscard

This object specifies how often rollup samples are discarded.

'daily'
Rollup samples are discarded every day.

'monthly'
Rollup samples are discarded every month.

Enumerationr/w

Enumerated Values:

1	daily
2	monthly

.1.3.6.1.4.1.9.9.772.1.9.1.14

cpfrExitCostDiscardType

This object specifies the threshold value types for cost
discard.

'absolute'
Absolute value configured in cpfrExitCostDiscardAbsolute
object will be used.

'percent'
Percent value …

Enumerationr/w

Enumerated Values:

1	absolute
2	percent

.1.3.6.1.4.1.9.9.772.1.9.1.15

cpfrExitCostDiscardAbsolute

This object specifies an absolute number of rollup samples
to be discarded.

samplesUnsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.9.1.16

cpfrExitCostDiscardPercent

This object specifies what percentage of the rollup samples
should be discarded when calculating the exit cost.

percentUnsigned32r/w

Constraints:
range: 1-99

.1.3.6.1.4.1.9.9.772.1.9.1.17

cpfrExitCostEndDayOfMonth

This object specifies the end billing date.

Unsigned32r/w

Constraints:
range: 1-31

.1.3.6.1.4.1.9.9.772.1.9.1.18

cpfrExitCostEndOffsetType

This object indicates the cpfrExitCostEndOffset is before or
after cpfrExitCostEndDayOfMonth.

'positive'
time After cpfrExitCostEndDayOfMonth.

'negative'
time before cpfrExitCostEndDa…

Enumerationr/w

Enumerated Values:

1	positive
2	negative

.1.3.6.1.4.1.9.9.772.1.9.1.19

cpfrExitCostEndOffset

This object indicates an offset in hours and minutes, allowing
you to compensate for time zone differences.

SNMPv2-TCTimeIntervalr/w

Textual Convention: SNMPv2-TCTimeInterval Integer32

Type Constraints:
range: 0..2147483647

.1.3.6.1.4.1.9.9.772.1.9.1.20

cpfrExitCostFixedFeeCost

This object specifies a non-usage based fixed fee.

dollarsUnsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.9.1.21

cpfrExitCostNickName

This object specifies a nickname for the cost structure.

SNMP-FRAMEWORK-MIBSnmpAdminStringr/w

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.772.1.9.1.22

cpfrExitCostSamplingPeriod

This object specifies the sampling period.

minutesUnsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.9.1.23

cpfrExitCostRollupPeriod

This object specifies that samples are rolled up at the
interval specified for the minutes argument. This value must be
greater than or equal to the corresponding instance of
cpfrExitCostSamplingPeriod.

minutesUnsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.9.1.24

cpfrExitCostSummerTimeStart

This object indicates the date and time when the daylight
savings time starts.

SNMPv2-TCDateAndTimer/w

Textual Convention: SNMPv2-TCDateAndTime OctetString

Type Constraints:
range: 8
range: 11

.1.3.6.1.4.1.9.9.772.1.9.1.25

cpfrExitCostSummerTimeOffset

This object specifies the offset added in the spring and
subtracted in the fall.

minutesUnsigned32r/w

Constraints:
range: 1-120

.1.3.6.1.4.1.9.9.772.1.9.1.26

cpfrExitCostSummerTimeEnd

This object indicates the date and time when daylight saving
time comes to an end.

SNMPv2-TCDateAndTimer/w

Textual Convention: SNMPv2-TCDateAndTime OctetString

Type Constraints:
range: 8
range: 11

.1.3.6.1.4.1.9.9.772.1.9.1.27

cpfrExitCapacity

This object indicates the capacity of the interface.

KbpsHCNUM-TCCounterBasedGauge64

Textual Convention: HCNUM-TCCounterBasedGauge64 Unsigned64

.1.3.6.1.4.1.9.9.772.1.9.1.28

cpfrExitRxBandwidth

This object indicates the receive bandwidth as configured on
the interface.

KbpsHCNUM-TCCounterBasedGauge64

Textual Convention: HCNUM-TCCounterBasedGauge64 Unsigned64

.1.3.6.1.4.1.9.9.772.1.9.1.29

cpfrExitTxBandwidth

This object indicates the transmit bandwidth as configured on
the interface.

KbpsHCNUM-TCCounterBasedGauge64

Textual Convention: HCNUM-TCCounterBasedGauge64 Unsigned64

.1.3.6.1.4.1.9.9.772.1.9.1.30

cpfrExitTxLoad

This object indicates the transmit load of the exit.

percentUnsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.9.1.31

cpfrExitRxLoad

This object indicates the receive traffic load of the exit.

Unsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.9.1.32

cpfrExitNickName

The object indicates the exit nickname assigned to an external
PfR interface.

SNMP-FRAMEWORK-MIBSnmpAdminString

Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.772.1.9.1.33

cpfrExitCost1

This object indicates the exit link cost for the current
month.

dollarsUnsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.9.1.34

cpfrExitSustainedUtil1

This object indicates the sustained utilization of the exit
link in the current month.

KbpsUnsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.9.1.35

cpfrExitCost2

This object indicates the exit link cost of the previous
month.

dollarsUnsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.9.1.36

cpfrExitSustainedUtil2

This object indicates the sustained utilization of the exit
link for the month prior to the previous month.

KbpsUnsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.9.1.37

cpfrExitCost3

This object indicates the exit link cost for the month prior to
the previous month.

dollarsUnsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.9.1.38

cpfrExitSustainedUtil3

This object indicates the sustained utilization of the exit
link the month prior to the previous month.

KbpsUnsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.9.1.39

cpfrExitRollupTotal

This object indicates the total rollups.

minutesUnsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.9.1.40

cpfrExitRollupDiscard

This object indicates the total discarded rollups.

Unsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.9.1.41

cpfrExitRollupLeft

This object indicates the left over rollups.

Unsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.9.1.42

cpfrExitRollupCollected

This object indicates the rollups that are being collected.

Unsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.9.1.43

cpfrExitRollupMomTgtUtil

This object indicates the momentary utilization of the
targets.

KbpsUnsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.9.1.44

cpfrExitRollupStartingTgtUtil

This object indicates the target when the rollup starts.

KbpsUnsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.9.1.45

cpfrExitRollupCurrentTgtUtil

This object indicates current rollup target.

kbpsUnsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.9.1.46

cpfrExitRollupCumRxBytes

This object indicates the cumulative receive bytes in a
rollup.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.772.1.9.1.47

cpfrExitRollupCumTxBytes

This object indicates the cumulative transmit bytes in a
rollup.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.772.1.9.1.48

cpfrExitRollupTimeRemain

This object indicates the remaining time before a new rollup is
started.

SNMPv2-TCTimeInterval

Textual Convention: SNMPv2-TCTimeInterval Integer32

Type Constraints:
range: 0..2147483647

.1.3.6.1.4.1.9.9.772.1.9.1.49

cpfrExitOperStatus

This object indicates the current status of an exit.

'up'
The exit is up.

'down'
The exit is down.

Enumeration

Enumerated Values:

1	up
2	down

.1.3.6.1.4.1.9.9.772.1.9.1.50

cpfrExitRsvpBandwidthPool

This object indicates the bandwidth pool for RSVP in PfR.

bytesHCNUM-TCCounterBasedGauge64

Textual Convention: HCNUM-TCCounterBasedGauge64 Unsigned64

.1.3.6.1.4.1.9.9.772.1.9.1.51

cpfrExitCostTierTable

table

.1.3.6.1.4.1.9.9.772.1.10 · 1 row entry · 4 columns

Open in standard view

This table lists the cost tier instances created by the
system.
          
This table has an expansion dependent relationship on the  
cpfrExitTable, containing zero or more rows for each
cpfrExitEntry.

cpfrExitCostTierEntry entry .1.3.6.1.4.1.9.9.772.1.10.1

An entry describing the configuration of a cost tier of a PfR
monitored or Controlled exit.

A peer SNMP entity may create a cost tier for a PfR monitored
or controlled exit by setting an instance of
cpfrExi…

Indexes

cpfrMCIndex cpfrBRIndex cpfrExitIndex cpfrExitCostTierIndex

Column Syntax OID

cpfrExitCostTierIndex

This object indicates an arbitrary integer-value that uniquely
identifies the cost tier of a PfR monitored/controlled exit.

Unsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.10.1.1

cpfrExitCostTierStorageType

This object specifies the memory realization of the row.
The following columnar objects are allowed to be writable
when the storageType of this entry is permanent(4):
cpfrExitCostTierFee.

SNMPv2-TCStorageTyper/w

Textual Convention: SNMPv2-TCStorageType Enumeration

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

.1.3.6.1.4.1.9.9.772.1.10.1.2

cpfrExitCostTierRowStatus

This object specifies the status of a row in the exit cost tier
table. The following columnar objects must be valid in
order to transition the row to the active state:
cpfrExitCostTierFee.

The followin…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.9.9.772.1.10.1.3

cpfrExitCostTierFee

This object specifies the cost value of a cost tier.

Unsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.10.1.4

cpfrTrafficClassTable

table

.1.3.6.1.4.1.9.9.772.1.11 · 1 row entry · 19 columns

Open in standard view

This table lists the TC instances created by the system.

cpfrTrafficClassEntry entry .1.3.6.1.4.1.9.9.772.1.11.1

An entry describing the metrics that identify a PfR monitored
or controlled TC.

A device supporting PfR creates a row in a
cpfrTrafficClassTable when it recognizes the addition of a new
TC monitored by PfR.…

Indexes

cpfrMCIndex cpfrTrafficClassIndex

Column Syntax OID

cpfrTrafficClassIndex

This object indicates an arbitrary integer-value that uniquely
identifies a TC monitored/controlled by PfR.

Unsigned32

Constraints:
range: 1-4294967295

.1.3.6.1.4.1.9.9.772.1.11.1.1

cpfrTCBRIndex

This object indicates the index of the BR on which PfR is
controlling the TC.

Unsigned32

Constraints:
range: 1-4294967295

.1.3.6.1.4.1.9.9.772.1.11.1.2

cpfrTCBRExitIndex

This object indicates the index of the exit on which PfR is
controlling the TC.

PfrExitIndex

Textual Convention: PfrExitIndex Unsigned32

Type Constraints:
range: 1..4294967295

.1.3.6.1.4.1.9.9.772.1.11.1.3

cpfrTCMapIndex

This object indicates the map index of the PfR map defining the
policy for the TC.

PfrMapIndexOrZero

Textual Convention: PfrMapIndexOrZero Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.772.1.11.1.4

cpfrTCMapPolicyIndex

This object indicates the map policy index of the PfR map
defining the policy for the TC.

PfrMapPolicyIndex

Textual Convention: PfrMapPolicyIndex Unsigned32

Type Constraints:
range: 1..4294967295

.1.3.6.1.4.1.9.9.772.1.11.1.5

cpfrTrafficClassValid

This object indicates which objects in the traffic class table
are valid. If an attribute of a TC is configured, the
corresponding bit in this object should be set.

'source'
Source address is valid.
…

Bits

Enumerated Values:

0	source
1	destination
2	sourcePort
3	destinationPort
4	dscp
5	protocol
6	nbar

.1.3.6.1.4.1.9.9.772.1.11.1.6

cpfrTCSrcPrefixType

This object indicates the type of IP address indicated by the
corresponding instance of cpfrTCSrcPrefix.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.9.9.772.1.11.1.7

cpfrTCSrcPrefix

This object indicates the source IP prefix of the corresponding
TC.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.772.1.11.1.8

cpfrTCSrcPrefixLen

This object indicates the prefix length of source IP address
for the TC.

Unsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.11.1.9

cpfrTCSrcMinPort

This object indicates the minimum source port number for a
TC.

CISCO-TCCiscoPort

Textual Convention: CISCO-TCCiscoPort Integer32

Type Constraints:
range: 0..65535

.1.3.6.1.4.1.9.9.772.1.11.1.10

cpfrTCSrcMaxPort

This object indicates the maximum source port number for a TC

CISCO-TCCiscoPort

Textual Convention: CISCO-TCCiscoPort Integer32

Type Constraints:
range: 0..65535

.1.3.6.1.4.1.9.9.772.1.11.1.11

cpfrTCDstPrefixType

This object indicates the type of IP address indicated by the
corresponding instances of cpfrTCDstPrefix.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.9.9.772.1.11.1.12

cpfrTCDstPrefix

This object indicates the destination IP prefix of the
corresponding TC.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.772.1.11.1.13

cpfrTCDstPrefixLen

This object indicates the prefix length of destination IP
address for the TC.

Unsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.11.1.14

cpfrTCDstMinPort

This object indicates the minimum destination port of a TC.

CISCO-TCCiscoPort

Textual Convention: CISCO-TCCiscoPort Integer32

Type Constraints:
range: 0..65535

.1.3.6.1.4.1.9.9.772.1.11.1.15

cpfrTCDstMaxPort

This object indicates the maximum destination port of a TC

CISCO-TCCiscoPort

Textual Convention: CISCO-TCCiscoPort Integer32

Type Constraints:
range: 0..65535

.1.3.6.1.4.1.9.9.772.1.11.1.16

cpfrTCDscpValue

This object indicates the Differentiated Services Code Point
(DSCP) value of a TC.

Integer32

Constraints:
range: -1-63

.1.3.6.1.4.1.9.9.772.1.11.1.17

cpfrTCProtocol

This object indicates the routing protocol by a TC.

bgpEnumeration

Enumerated Values:

1	static
2	eigrp
3	ribpbr
4	bgp
5	pbr
6	cce
7	unknown

.1.3.6.1.4.1.9.9.772.1.11.1.18

cpfrTCNbarApplication

This object indicates the application or protocol recognized by
NBAR. The value of this object points to an entry in
cnpdSupportedProtocolsTable, which describes the recognized
protocol, and is defined in CISCO-NBAR-PRO…

CISCO-NBAR-PROTOCOL-DISCOVERY-MIBCiscoPdProtocolIndex

Textual Convention: CISCO-NBAR-PROTOCOL-DISCOVERY-MIBCiscoPdProtocolIndex Unsigned32

.1.3.6.1.4.1.9.9.772.1.11.1.19

cpfrTrafficClassStatusTable

table

.1.3.6.1.4.1.9.9.772.1.12 · 1 row entry · 11 columns

Open in standard view

This table lists the TC status instances created by the
system.  
          
This table has an one-to-one relationship with
cpfrTrafficClassTable,  containing a row for each entry in
cpfrTrafficClassTable.

cpfrTrafficClassStatusEntry entry .1.3.6.1.4.1.9.9.772.1.12.1

An entry describing the status of a PfR monitored or controlled
TC.

A device supporting PfR creates a row in a
cpfrTrafficClassStatusTable when it recognizes the addition of
a new TC. Likewise, such a devi…

Indexes

cpfrMCIndex cpfrTrafficClassIndex

Column Syntax OID

cpfrTCStatus

This object indicates the current state of a TC.

'default'
The state means that the parent IP routes control the exit
for this destination prefix. This would be the same behavior as
if PfR were not config…

Enumeration

Enumerated Values:

1	default
2	choose
3	holddown
4	inpolicy
5	oopolicy

.1.3.6.1.4.1.9.9.772.1.12.1.1

cpfrTCSType

This object indicates whether a TC was learned or configured.

'learned'
The TC is learned by PfR.

'configured'
The TC is configured via CLI command.

Enumeration

Enumerated Values:

1	learned
2	configured

.1.3.6.1.4.1.9.9.772.1.12.1.2

cpfrTCSLearnListIndex

This object indicates the index of the learn list
responsible for PfR learning this TC.

PfrLearnListIndexOrZero

Textual Convention: PfrLearnListIndexOrZero Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.772.1.12.1.3

cpfrTCSTimeOnCurrExit

This object indicates the length of time the TC has been
controlled on the current exit.

secondsUnsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.12.1.4

cpfrTCSControlState

The object indicates the control state of a TC.

'controlled'
PfR is controlling this TC.

'uncontrolled'
PfR is not controlling this TC.

Enumeration

Enumerated Values:

1	controlled
2	uncontrolled

.1.3.6.1.4.1.9.9.772.1.12.1.5

cpfrTCSControlBy

This object indicates which routing protocol a TC is
being controlled by.

'static'
TC is controlled by static routing protocol.

'eigrp'
TC is controlled by EIGRP.

'ribp…

Enumeration

Enumerated Values:

1	static
2	eigrp
3	ribpbr
4	bgp
5	pbr
6	cce
7	unknown

.1.3.6.1.4.1.9.9.772.1.12.1.6

cpfrTCSTimeRemainCurrState

This object indicates the time remaining before the prefix
timer expires.

secondsUnsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.12.1.7

cpfrTCSLastOOPEventTime

This object indicates the time when the last out-of-policy
event was observed.

SNMPv2-TCTimeStamp

Textual Convention: SNMPv2-TCTimeStamp Unsigned32

.1.3.6.1.4.1.9.9.772.1.12.1.8

cpfrTCSLastOOPReason

This object indicates the last out-of-policy reason.

This object indicates the reason that causes an out-of-policy
event.

'delayOOPassiveMode'
The Delay is out of policy in passive mode.
…

Enumeration

Enumerated Values:

1	delayOOPPassiveMode
2	lossOOPPassiveMode
3	unreachableOOPPassiveMode
4	delayOOPActiveMode
5	lossOOPActiveMode
6	unreachableOOPActiveMode
7	jitterOOPActiveMode
8	mosOOPActiveMode
9	none
10	rsvpOOPRecomputeExclude

.1.3.6.1.4.1.9.9.772.1.12.1.9

cpfrTCSLastRouteChangeEvent

This object indicates the value of sysUpTime when the last
route change occurred for this TC.

SNMPv2-TCTimeStamp

Textual Convention: SNMPv2-TCTimeStamp Unsigned32

.1.3.6.1.4.1.9.9.772.1.12.1.10

cpfrTCSLastRouteChangeReason

This object indicates the reason the last route change
occurred.

PfrLastUncontrolReason

Textual Convention: PfrLastUncontrolReason Enumeration

Type Values:

1	none
2	activatingUnsedFcdTgt
3	ifaceDown
4	newProbeTargetAssigned
5	newTargetAssigned
6	borderDown
7	uncontrolNonOptimizedPfx
8	recontrolNull0Pfx
9	recontrolSinkHolePfx
10	modeRouteChange
11	pfxEnabled
12	uncontrolModeMonitorChange
13	insideEnabled
14	forcedNextHop
15	forwardToNull0
16	clearOnePfx
17	clearOneTc
18	grantUpdated
19	tcInFastMode
20	pbrBRTopologyChange
21	pfrReqNotMet
22	probeFrequencyChange
23	fcdTgtAssRemMod
24	policyChangedAddedNewFcdProbeTgt
25	usingFcdTgtNow
26	firstTargetWithDscpAdded
27	usingLmNow
28	lastTargetWithDscpRemoved
29	couldntMonitor
30	couldntControl
31	applControlOnBrFailed
32	allProtoCouldNtControl
33	excludePfxFailed
34	ipflowRestFailed
35	couldntExclude
36	dontDowngradeAllEntrances
37	maxDownGrade
38	cantSelectEntrances
39	unhandledOopReasonInChooseExit
40	oopModeSelectExitGood
41	couldntFindBestExitInAllLinkGrps
42	couldntFindBestExit
43	failedToControlRoute
44	endOfProbing
45	retryForcedNextHop
46	noStatusInPfxTimeout
47	couldntChooseExitInPfxTimeout
48	inconsistentView
49	unableToSendControlMsg
50	nbarIdStateUpdated
51	controledExitIsNotCurrent
52	exitMisMatch
53	newExitWhileInpolicy
54	unknownExit
55	controlledExitIsNotCurrForUpd
56	couldntControlPasPfxInSpecMode
57	remoteStatsNotFound
58	nbarInternalIfAddedRemoved
59	noPassiveData
60	probeNumPktsChanged
61	last

.1.3.6.1.4.1.9.9.772.1.12.1.11

cpfrTrafficClassMetricTable

table

.1.3.6.1.4.1.9.9.772.1.13 · 1 row entry · 17 columns

Open in standard view

This table lists the TC's metrics instances created by the
system.  
          
This table has an one-to-one relationship with
cpfrTrafficClassTable,  containing a row for each entry in
cpfrTrafficClassTable.

cpfrTrafficClassMetricEntry entry .1.3.6.1.4.1.9.9.772.1.13.1

An entry describing the metric for a PfR monitored or
controlled TC.

A device supporting PfR creates a row in a
cpfrTrafficClassMetricTable when it recognizes the addition of
a new TC. Likewise, such a dev…

Indexes

cpfrMCIndex cpfrTrafficClassIndex

Column Syntax OID

cpfrTCMLastUpdateTime

This object indicates the value of sysUpTime when the metrics
were last updated.

SNMPv2-TCTimeStamp

Textual Convention: SNMPv2-TCTimeStamp Unsigned32

.1.3.6.1.4.1.9.9.772.1.13.1.1

cpfrTCMAge

This object indicates the age of a metric.

secondsUnsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.13.1.2

cpfrTCMetricsValid

This object indicates if an object in the entry is valid.

'relativeDelay'
Relative delay is a valid value.

'relativeJitter'
Relative jitter is a valid value.

'relativeD…

Bits

Enumerated Values:

0	activeSTJitterAvg
1	mosPercentage
2	attempts
3	packets
4	passiveSTUnreachableAvg
5	passiveSTdelayAvg
6	passiveSTLossAvg
7	activeSTUnreachableAvg
8	activeSTDelayAvg
9	passiveLTUnreachableAvg
10	passiveLTDelayAvg
11	passiveLTLossAvg
12	activeLTUnreachableAvg
13	activeLTDelayAvg

.1.3.6.1.4.1.9.9.772.1.13.1.3

cpfrTCMActiveSTJitterAvg

This object indicates average jitter of a TC in active
mode.

percentUnsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.13.1.4

cpfrTCMMOSPercentage

This object indicates the number of Mean Opinion Score (MOS)
packets with a percentage below threshold in active mode.

percentUnsigned32

Constraints:
range: 0-100

.1.3.6.1.4.1.9.9.772.1.13.1.5

cpfrTCMAttempts

This object indicates the number of attempts to send an
active probe to a target for this TC.

attemptsUnsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.13.1.6

cpfrTCMPackets

This object indicates the number packets per jitter probe.

Packets/probeUnsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.13.1.7

cpfrTCMPassiveSTUnreachableAvg

This object indicates the number of the average short term
unreachable targets in passive mode.

flows-per-millionUnsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.13.1.8

cpfrTCMPassiveSTDelayAvg

This object indicates the short term delay as measured by
Netflow. The short term interval is 5 minutes.

Unsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.13.1.9

cpfrTCMPassiveSTLossAvg

This object indicates the number of short term packets lost
in passive mode.

packetsUnsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.13.1.10

cpfrTCMActiveSTUnreachableAvg

This object indicates the number of short term unreachable
packets in active mode.

flows-per-millionUnsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.13.1.11

cpfrTCMActiveSTDelayAvg

This object indicates the short term delay in
milliseconds in active mode.

Unsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.13.1.12

cpfrTCMPassiveLTUnreachableAvg

This object indicates the number of long term unreachable
packets in flows-per-million in passive mode.

Unsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.13.1.13

cpfrTCMPassiveLTDelayAvg

This object indicates the long term delay in milliseconds
in passive mode.

Unsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.13.1.14

cpfrTCMPassiveLTLossAvg

This object indicates the number of packets lost over the
long term in packets-per-million in passive mode.

Unsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.13.1.15

cpfrTCMActiveLTUnreachableAvg

This object indicates the number of long term unreachable
packets in flows-per-million in active mode.

Unsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.13.1.16

cpfrTCMActiveLTDelayAvg

This object indicates the long term delay in milliseconds
in active mode.

Unsigned32

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.772.1.13.1.17

cpfrLinkGroupExitTable

table

.1.3.6.1.4.1.9.9.772.1.14 · 1 row entry · 7 columns

Open in standard view

This table lists the link group instances created by the
system. 
          
It has an expansion dependent relationship on cpfrExitTable, 
containing zero or more rows for each cpfrExitEntry.

cpfrLinkGroupExitEntry entry .1.3.6.1.4.1.9.9.772.1.14.1

An entry describing a link group configured for a PfR monitored
or controlled external exit.

A peer SNMP entity may create a link group for a PfR monitored
or controlled exit by setting an instance of
cpfrL…

Indexes

cpfrMCIndex cpfrLinkGroupName cpfrLinkGroupIndex

Column Syntax OID

cpfrLinkGroupName

This object indicates the name of a link-group.

OctetString

Constraints:
range: 1-64

.1.3.6.1.4.1.9.9.772.1.14.1.1

cpfrLinkGroupIndex

This object indicates a unique arbitrary number identifying a
specific instance in a link-group with the identical name.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.772.1.14.1.2

cpfrLinkGroupStorageType

This object specifies the memory realization of the row.
The following columnar objects are allowed to be writable
when the storageType of this entry is permanent(4):
cpfrLinkGroupBRIndex, cpfrLinkGroupExitIndex.

SNMPv2-TCStorageTyper/w

Textual Convention: SNMPv2-TCStorageType Enumeration

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

.1.3.6.1.4.1.9.9.772.1.14.1.3

cpfrLinkGroupRowStatus

This object specifies the status of a NBAR application list.
The following columnar objects must be valid in order to
transition the row to the active state:
None.

The following columnar objects can be m…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.9.9.772.1.14.1.4

cpfrLinkGroupBRIndex

This object specifies the PfR BR on which the exit related to
this link group is configured.

PfrBorderRouterIndexr/w

Textual Convention: PfrBorderRouterIndex Unsigned32

Type Constraints:
range: 1..4294967295

.1.3.6.1.4.1.9.9.772.1.14.1.5

cpfrLinkGroupExitIndex

This object specifies the exit, identified by this index, in
combination with cpfrLinkGroupBRIndex, in cpfrExitTable.

PfrExitIndexr/w

Textual Convention: PfrExitIndex Unsigned32

Type Constraints:
range: 1..4294967295

.1.3.6.1.4.1.9.9.772.1.14.1.6

cpfrLinkGroupType

This object indicates PfR Link-Group type.

'primaryLinkGroup'
primary link-group

'fallbackLinkGroup'
fallback link-group

'none'
There is no link-group.

Enumeration

Enumerated Values:

1	primaryLinkGroup
2	fallbackLinkGroup
3	none

.1.3.6.1.4.1.9.9.772.1.14.1.7

cpfrNbarApplListTable

table

.1.3.6.1.4.1.9.9.772.1.15 · 1 row entry · 5 columns

Open in standard view

This table lists the NBAR list instances created by the
system.  
          
This table has an expansion dependent relationship on
cpfrMatchTable and cpfrLearnListTable, containing zero or more
rows for each cpfrMatchEntry and cpfrLearnListEntry.

cpfrNbarApplListEntry entry .1.3.6.1.4.1.9.9.772.1.15.1

An entry describing a NBAR application configured in PfR.

A peer SNMP entity may create an NBAR application entry by
setting an instance of cpfrNbarApplListRowStatus to
'createAndWait' or
'createAndGo'. Ob…

Indexes

cpfrNbarApplListName cpfrNbarApplIndex

Column Syntax OID

cpfrNbarApplListName

This object indicates the name of a NBAR application list.

OctetString

Constraints:
range: 1-64

.1.3.6.1.4.1.9.9.772.1.15.1.1

cpfrNbarApplIndex

This object indicates a unique arbitrary number identifying a
specific protocol in a PfR NBAR Application List.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.772.1.15.1.2

cpfrNbarApplListStorageType

This object specifies the memory realization of the row.
The following columnar objects are allowed to be writable
when the storageType of this conceptual row is permanent(4):
cpfrNbarApplPdIndex.

SNMPv2-TCStorageTyper/w

Textual Convention: SNMPv2-TCStorageType Enumeration

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

.1.3.6.1.4.1.9.9.772.1.15.1.3

cpfrNbarApplListRowStatus

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.9.9.772.1.15.1.4

cpfrNbarApplPdIndex

CISCO-NBAR-PROTOCOL-DISCOVERY-MIBCiscoPdProtocolIndexr/w

Textual Convention: CISCO-NBAR-PROTOCOL-DISCOVERY-MIBCiscoPdProtocolIndex Unsigned32

.1.3.6.1.4.1.9.9.772.1.15.1.5