cpfrActiveProbeRowStatus
CISCO-PFR-MIB ·
.1.3.6.1.4.1.9.9.772.1.7.1.3
Object
This object specifies the status of row in the active probe
table. The following columnar objects must be valid in order to
transition the row to the active state:
cpfrActiveProbeType,
cpfrActiveProbeTargetAddressType, cpfrActiveProbeTargetAddress,
cpfrActiveProbeTargetPortNumber, cpfrActiveProbeMapIndex,
cpfrActiveProbeMapPolicyIndex.
The following columnar objects can be modified when the row is
in the active state:
None
Context
- MIB
- CISCO-PFR-MIB
- OID
.1.3.6.1.4.1.9.9.772.1.7.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cpfrActiveProbeEntry
- Table
- cpfrActiveProbeTable
- Siblings
- 17
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cpfrActiveProbeIndex This object indicates an arbitrary integer-value that uniquely
identifies an active probe entity in a PfR policy map. | column | Unsigned32 | .1.3.6.1.4.1.9.9.772.1.7.1.1 |
| cpfrActiveProbeCodecName This object specifies the codec value used for Mean Opinion
Score (MOS) calculation and only used with the jitter probe
type. The codec values must be one of the following,
… | column | Enumeration | .1.3.6.1.4.1.9.9.772.1.7.1.10 |
| cpfrActiveProbeMapIndex This object specifies the index of a PfR map under which this
active probe was configured. | column | PfrMapIndexOrZero | .1.3.6.1.4.1.9.9.772.1.7.1.11 |
| cpfrActiveProbeMapPolicyIndex This object specifies the index of a PfR map policy under
which this active probe was configured. | column | PfrMapIndexOrZero | .1.3.6.1.4.1.9.9.772.1.7.1.12 |
| cpfrActiveProbeAdminStatus This object specifies whether the probe is assigned to
a prefix or not, or is a forced probe configured on a PfR map.
'assigned'
Active probe is assigned.
… | column | Enumeration | .1.3.6.1.4.1.9.9.772.1.7.1.13 |
| cpfrActiveProbeOperStatus This object indicates the current status of an active probe.
'running'
Active probe is running.
'notrunning'
Active probe is not running. | column | Enumeration | .1.3.6.1.4.1.9.9.772.1.7.1.14 |
| cpfrActiveProbeAssignedPfxAddressType This object indicates the type of assigned prefix address. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.772.1.7.1.15 |
| cpfrActiveProbeAssignedPfxAddress This object indicates the assigned prefix address. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.772.1.7.1.16 |
| cpfrActiveProbeAssignedPfxLen This object indicates the length of the assigned prefix
address. | column | Unsigned32 | .1.3.6.1.4.1.9.9.772.1.7.1.17 |
| cpfrActiveProbeMethod This object indicates how an active probe is entered into
the PfR system.
'learned'
Active probe is triggered when PfR learns TCs.
'configured'
… | column | Enumeration | .1.3.6.1.4.1.9.9.772.1.7.1.18 |
| cpfrActiveProbeStorageType This object specifies the memory realization of the row. The
following columnar objects are allowed to be writable when the
storageType of this entry is permanent(4):
pfrActivePr… | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.9.9.772.1.7.1.2 |
| cpfrActiveProbeType This object specifies the Type of probe.
'echo'
Use Internet Control Message Protocol (ICMP) echo messages
(ping) for active probe.
'jitter'
Use jitt… | column | Enumeration | .1.3.6.1.4.1.9.9.772.1.7.1.4 |
| cpfrActiveProbeTargetAddressType This object specifies the type of a target IP address of a
prefix to be monitored using the specified type of probe. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.772.1.7.1.5 |
| cpfrActiveProbeTargetAddress This object specifies target IP address of a prefix to be
monitored using the specified type of probe. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.772.1.7.1.6 |
| cpfrActiveProbeTargetPortNumber This object specifies the destination port number for the
active probe. | column | CISCO-TCCiscoPort | .1.3.6.1.4.1.9.9.772.1.7.1.7 |
| cpfrActiveProbePfrMapIndex This object specifies the index of the PfR policy map on
which the active probe clause is configured. | column | PfrMapIndexOrZero | .1.3.6.1.4.1.9.9.772.1.7.1.8 |
| cpfrActiveProbeDscpValue This object indicates the Differentiated Services Code Point
(DSCP) value. | column | Unsigned32 | .1.3.6.1.4.1.9.9.772.1.7.1.9 |