cpfrActiveProbeMethod

CISCO-PFR-MIB · .1.3.6.1.4.1.9.9.772.1.7.1.18
MIB view Table view

Object

column Enumeration 
This object indicates how an active probe is entered into
the PfR system.
              
'learned'
   Active probe is triggered when PfR learns TCs.
              
'configured'
   Active probe is forced by CLI command.

Context

MIB
CISCO-PFR-MIB
OID
.1.3.6.1.4.1.9.9.772.1.7.1.18
Type
column
Access
readonly
Status
current
Parent
cpfrActiveProbeEntry
Table
cpfrActiveProbeTable
Siblings
17

Syntax

Enumeration

Values & Constraints

Enumerated Values
1learned
2configured

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cpfrActiveProbeIndex
This object indicates an arbitrary integer-value that uniquely identifies an active probe entity in a PfR policy map.
columnUnsigned32.1.3.6.1.4.1.9.9.772.1.7.1.1
cpfrActiveProbeCodecName
This object specifies the codec value used for Mean Opinion Score (MOS) calculation and only used with the jitter probe type. The codec values must be one of the following, …
columnEnumeration.1.3.6.1.4.1.9.9.772.1.7.1.10
cpfrActiveProbeMapIndex
This object specifies the index of a PfR map under which this active probe was configured.
columnPfrMapIndexOrZero.1.3.6.1.4.1.9.9.772.1.7.1.11
cpfrActiveProbeMapPolicyIndex
This object specifies the index of a PfR map policy under which this active probe was configured.
columnPfrMapIndexOrZero.1.3.6.1.4.1.9.9.772.1.7.1.12
cpfrActiveProbeAdminStatus
This object specifies whether the probe is assigned to a prefix or not, or is a forced probe configured on a PfR map. 'assigned' Active probe is assigned. …
columnEnumeration.1.3.6.1.4.1.9.9.772.1.7.1.13
cpfrActiveProbeOperStatus
This object indicates the current status of an active probe. 'running' Active probe is running. 'notrunning' Active probe is not running.
columnEnumeration.1.3.6.1.4.1.9.9.772.1.7.1.14
cpfrActiveProbeAssignedPfxAddressType
This object indicates the type of assigned prefix address.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.9.9.772.1.7.1.15
cpfrActiveProbeAssignedPfxAddress
This object indicates the assigned prefix address.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.9.9.772.1.7.1.16
cpfrActiveProbeAssignedPfxLen
This object indicates the length of the assigned prefix address.
columnUnsigned32.1.3.6.1.4.1.9.9.772.1.7.1.17
cpfrActiveProbeStorageType
This object specifies the memory realization of the row. The following columnar objects are allowed to be writable when the storageType of this entry is permanent(4): pfrActivePr…
columnSNMPv2-TCStorageType.1.3.6.1.4.1.9.9.772.1.7.1.2
cpfrActiveProbeRowStatus
This object specifies the status of row in the active probe table. The following columnar objects must be valid in order to transition the row to the active state:…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.9.9.772.1.7.1.3
cpfrActiveProbeType
This object specifies the Type of probe. 'echo' Use Internet Control Message Protocol (ICMP) echo messages (ping) for active probe. 'jitter' Use jitt…
columnEnumeration.1.3.6.1.4.1.9.9.772.1.7.1.4
cpfrActiveProbeTargetAddressType
This object specifies the type of a target IP address of a prefix to be monitored using the specified type of probe.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.9.9.772.1.7.1.5
cpfrActiveProbeTargetAddress
This object specifies target IP address of a prefix to be monitored using the specified type of probe.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.9.9.772.1.7.1.6
cpfrActiveProbeTargetPortNumber
This object specifies the destination port number for the active probe.
columnCISCO-TCCiscoPort.1.3.6.1.4.1.9.9.772.1.7.1.7
cpfrActiveProbePfrMapIndex
This object specifies the index of the PfR policy map on which the active probe clause is configured.
columnPfrMapIndexOrZero.1.3.6.1.4.1.9.9.772.1.7.1.8
cpfrActiveProbeDscpValue
This object indicates the Differentiated Services Code Point (DSCP) value.
columnUnsigned32.1.3.6.1.4.1.9.9.772.1.7.1.9