CISCO-MODEM-MGMT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

cmGroupTable

table

.1.3.6.1.4.1.9.9.47.1.2.1 · 1 row entry · 2 columns

Open in standard view

Table of descriptive and status information about the groups
of modems.

cmGroupEntry entry .1.3.6.1.4.1.9.9.47.1.2.1.1

An entry in the table, containing information about a single
group of modems.

Indexes

cmGroupIndex

Column	Syntax	OID
cmGroupIndex This object identifies the group containing the modems for which this entry contains information.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.47.1.2.1.1.1`
cmGroupTotalDevices The total number of modem devices which are configured in the group.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.9.9.47.1.2.1.1.2`

cmGroupMemberTable

table

.1.3.6.1.4.1.9.9.47.1.2.2 · 1 row entry · 2 columns

Open in standard view

Table of information about the modem members in modem groups.

cmGroupMemberEntry entry .1.3.6.1.4.1.9.9.47.1.2.2.1

An entry in the table, containing information about modem
members in a group. The modem groups are currently created
when an associated Async interface groups are configured
via CLI command 'interface group-async' and…

Indexes

cmGroupIndex cmSlotIndex cmPortIndex

Column	Syntax	OID
cmSlotIndex The modem feature card slot number in the group.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.47.1.2.2.1.1`
cmPortIndex The modem port number of a modem feature card in the group.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.47.1.2.2.1.2`

cmLineStatusTable

table

.1.3.6.1.4.1.9.9.47.1.3.1 · 1 row entry · 17 columns

Open in standard view

A collection of objects that describe the status of the modem.

cmLineStatusEntry entry .1.3.6.1.4.1.9.9.47.1.3.1.1

An entry in the table, containing status information about a
single modem.

Indexes

cmSlotIndex cmPortIndex

Column Syntax OID

cmInterface

The interface that this modem is connected.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.9.9.47.1.3.1.1.1

cmGroup

The modem group number that the modem may be in.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.9.9.47.1.3.1.1.2

cmManufacturerID

A textual description to identify the modem, including the
manufacturer's name and type of modem.

OctetString

Constraints:
range: 0-79

.1.3.6.1.4.1.9.9.47.1.3.1.1.3

cmProductDetails

A textual description of the modem, including hardware revision
number, firmware revision number, feature set and optionally,
its serial number.

OctetString

Constraints:
range: 0-79

.1.3.6.1.4.1.9.9.47.1.3.1.1.4

cmManageable

The Manageable modem allows to be accessed through the out of
band management port in which the modem statistic data can be
retrieved, and the Direct Connect session can be used to
provide the test and debugging abili…

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.47.1.3.1.1.5

cmState

Indicates the current state of modem. The meaning of each
state code is explained below:

unknown: the current state of the modem is unknown.

onHook: the condition similar to hangi…

Enumeration

Enumerated Values:

1	unknown
2	onHook
3	offHook
4	connected
5	busiedOut
6	disabled
7	bad
8	loopback
9	downloadFirmware
10	downloadFirmwareFailed

.1.3.6.1.4.1.9.9.47.1.3.1.1.6

cmCallDirection

The modem can be used either as an incoming call or
outgoing call. This object specifies the direction of
the current or previous call.

Enumeration

Enumerated Values:

1	incoming
2	outgoing
3	none

.1.3.6.1.4.1.9.9.47.1.3.1.1.7

cmDisconnectReason

Indicates the reason that the last connection or call attempt
disconnected. The meaning of each reason code is explained
below:

unknown: the failure reason is unknown or there has been
no previou…

Enumeration

Enumerated Values:

1	unknown
2	lostCarrier
3	noCarrier
4	noDialTone
5	busy
6	modemWatchdogTimeout
7	dtrDrop
8	userHangup
9	compressionProblem
10	retrainFailure
11	remoteLinkDisconnect
12	abort
13	inactivityTimeout
14	dialStringError
15	linkFailure
16	modulationError
17	dialTimeout
18	remoteHangup
19	mnp10ProtocolError
20	lapmProtocolError
21	faxClass2Error
22	trainupFailure
23	fallbackTerminate
24	excessiveEC
25	hostDrop
26	terminate
27	autoLogonError
28	ccpNotSeen
29	callbackFailed
30	blacklist
31	lapmTimeout
32	reliableLinkTxTimeout
33	dspAccessFailure
34	cdOffTimeout
35	codewordSizeMismatch
36	dspDownloadFailure
37	modemDrNone
38	modemDrSoftwareReset
39	modemDrEcTerminated
40	modemDrBadMnp5Rxdata
41	modemDrBadV42bisRxdata
42	modemDrBadCopState
43	modemDrAth
44	modemDrAborted
45	modemDrConnectTimeout
46	modemDrResetDsp
47	modemDrNoCarrier
48	modemDrNoAbtDetected
49	modemDrTrainupFailure
50	modemDrRetrainLimit
51	modemDrAbtEndFailure
52	modemDrNoLr
53	modemDrLrParam1
54	modemDrLrIncompat
55	modemDrRetransmitLimit
56	modemDrInactivity
57	modemDrProtocolError
58	modemDrFallbackTerminate
59	modemDrNoXid
60	modemDrXidIncompat
61	modemDrDisc
62	modemDrDm
63	modemDrBadNr
64	modemDrSabmeOnline
65	modemDrXidOnline
66	modemDrLrOnline
67	modemDrBadCmnd
68	modemDrFrmrBadCmnd
69	modemDrFrmrData
70	modemDrFrmrLength
71	modemDrFrmrBadNr
72	modemDrLdNoLr
73	modemDrLdLrParam1
74	modemDrLdLrIncompat
75	modemDrLdRetransLimit
76	modemDrLdInactivity
77	modemDrLdProtocol
78	modemDrLdUser
79	modemDrHostNonspecific
80	modemDrHostBusy
81	modemDrHostNoAnswer
82	modemDrHostDtr
83	modemDrHostAth
84	modemDrHostNoDialtone
85	modemDrHostNoCarrier
86	modemDrHostAck
87	modemDrMohClrd
88	modemDrMohTimeout
89	modemDrCotAck
90	modemDrCotNak1
91	modemDrCotNak2
92	modemDrCotOff
93	modemDrCotTimeout
94	modemDrDcIllegalCodewordStepup
95	modemDrDcIllegalTokenEmptyNode
96	modemDrDcIllegalTokenTooLarge
97	modemDrDcReservedCommand
98	modemDrDcIllegalCharacterSizeStepup
99	modemDrDcRxDictionaryFull
100	modemDrDcRxHistoryFull
101	modemDrDcRxStringSizeExceeded
102	modemDrDcNegotiationError
103	modemDrDcCompressionError

.1.3.6.1.4.1.9.9.47.1.3.1.1.8

cmCallDuration

This object specifies the call duration of the current
or previous call.

SNMPv2-SMITimeTicks

Textual Convention: SNMPv2-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.47.1.3.1.1.9

cmCallPhoneNumber

The dialed outgoing telephone number of the current or
previous call.

OctetString

Constraints:
range: 0-64

.1.3.6.1.4.1.9.9.47.1.3.1.1.10

cmCallerID

The incoming caller identification of the current or
previous call if this entry is not in the connected state.

OctetString

Constraints:
range: 0-64

.1.3.6.1.4.1.9.9.47.1.3.1.1.11

cmModulationSchemeUsed

The modem modulation scheme used in the current or previous
call. This object is valid only for modems which have
cmManageable to be true.

Enumeration

Enumerated Values:

1	unknown
2	bell103a
3	bell212a
4	v21
5	v22
6	v22bis
7	v32
8	v32bis
9	vfc
10	v34
11	v17
12	v29
13	v33
14	k56flex
15	v23
16	v32terbo
17	v34plus
18	v90
19	v27ter
20	v110
21	piafs

.1.3.6.1.4.1.9.9.47.1.3.1.1.12

cmProtocolUsed

The modem protocol used in the current or previous call.
This object is valid only for modems which have cmManageable
to be true.

Enumeration

Enumerated Values:

1	normal
2	direct
3	reliableMNP
4	reliableLAPM
5	syncMode
6	asyncMode
7	ara10
8	ara20
9	unknown

.1.3.6.1.4.1.9.9.47.1.3.1.1.13

cmTXRate

The speed of modem transmit rate of the current or previous
call in bits per second. This object is valid only for modems
which have cmManageable to be true.

bits/secondSNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.47.1.3.1.1.14

cmRXRate

The speed of modem receive rate of the current or previous
call in bits per second. This object is valid only for modems
which have cmManageable to be true.

bits/secondSNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.47.1.3.1.1.15

cmTXAnalogSignalLevel

The modem transmit analog signal level in the current or
previous call. The unit used is in dBm. This object
is valid for modems that have cmManageable set to true(1)
otherwise 0 will be returned.

dBmInteger32

Constraints:
range: -43--9
range: 0-0

.1.3.6.1.4.1.9.9.47.1.3.1.1.16

cmRXAnalogSignalLevel

The modem transmit analog signal level in the current or
previous call. The unit used is in dBm. This object
is valid for modems that have cmManageable set to true(1)
otherwise 0 will be returned.

dBmInteger32

Constraints:
range: -128-0

.1.3.6.1.4.1.9.9.47.1.3.1.1.17

cmLineConfigTable

table

.1.3.6.1.4.1.9.9.47.1.3.2 · 1 row entry · 6 columns

Open in standard view

A collection of objects that describe some of the configuration
info of the modem.

cmLineConfigEntry entry .1.3.6.1.4.1.9.9.47.1.3.2.1

An entry in the table, containing configuration information
about a single modem.

Indexes

No indexes recorded

Column Syntax OID

cmATModePermit

Direct Connect session is used for test and debugging purpose
by using the modem AT commands through the out of band
management port when cmManageable is true.

This object specifies whether the Direct C…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.47.1.3.2.1.1

cmStatusPolling

Modem status and events can be polled through the out of band
management port when the cmManageable is true.

This object specifies whether this status polling feature is
enabled at this modem.
…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.47.1.3.2.1.2

cmBusyOutRequest

This object is used to put modem out of service, i.e. modem
cannot make calls or answer calls. If the modem to
be busyout is handling a call, the busyout action will
be taken after the current call is disconnected. Afte…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.47.1.3.2.1.3

cmShutdown

This object is used to put modem out of service, i.e. modem
cannot make calls or answer calls. This is a hard busyout
command to bring the modem out of service immediately without
waiting for the call to be ended norm…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.47.1.3.2.1.4

cmHoldReset

A command hold-reset will put the state of modem into reset mode
until an inverse command to bring modem out of RESET mode.
During the period of reset mode, this modem can not be used
and is non-functional.
…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.47.1.3.2.1.5

cmBad

This object can hold modem out of service and marks the modem
as suspected or proven to be bad. During the router start-up
initialization sequence, modem back-to-back tests will test
modems and mark those modems fail…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.47.1.3.2.1.6

cmLineStatisticsTable

table

.1.3.6.1.4.1.9.9.47.1.3.3 · 1 row entry · 17 columns

Open in standard view

A collection of objects that describe the status of the modem.

cmLineStatisticsEntry entry .1.3.6.1.4.1.9.9.47.1.3.3.1

An entry in the table, containing status information about a
single modem.

Indexes

No indexes recorded

Column	Syntax	OID
cmRingNoAnswers A counter to count the calls that ringing was detected but the call was not answered at this modem.	callsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.47.1.3.3.1.1`
cmIncomingConnectionFailures A counter that indicates the number of incoming connection requests that this modem answered in which it could not train with the other DCE. This object is valid only for modems which have cmManageable to be true.	callsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.47.1.3.3.1.2`
cmIncomingConnectionCompletions A counter that indicates the number of incoming connection requests that this modem answered and successfully trained with the other DCE. This object is valid only for modems which have cmManageable to be true.	callsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.47.1.3.3.1.3`
cmOutgoingConnectionFailures A counter that indicates the number of outgoing calls from this modem which successfully went off hook and dialed, in which it could not train with the other DCE. This object is valid only for modems which have cmM…	callsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.47.1.3.3.1.4`
cmOutgoingConnectionCompletions A counter that indicates the number of outgoing calls from this modem which resulted in successfully training with the other DCE.This object is valid only for modems which have cmManageable to be true.	callsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.47.1.3.3.1.5`
cmFailedDialAttempts A counter that indicates the number of call attempts that failed because the modem didn't go off hook, or there was no dial tone.	callsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.47.1.3.3.1.6`
cmNoDialTones A counter that indicates the number of times the dial tone expected but not received. This object is valid only for modems which have cmManageable to be true.	callsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.47.1.3.3.1.7`
cmDialTimeouts A counter that indicates the number of times the dial time-out occurred. This object is valid only for modems which have cmManageable to be true.	callsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.47.1.3.3.1.8`
cmWatchdogTimeouts The number of times the Call Processing watchdog timer has expired.	callsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.47.1.3.3.1.9`
cm2400OrLessConnections deprecated The number of connections initially established at a modulation speed of 2400 bits per second or less. This object is valid only for modems which have cmManageable to be true.	callsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.47.1.3.3.1.10`
cm2400To14400Connections deprecated The number of connections initially established at a modulation speed of greater than 2400 bits per second and less than 14400 bits per second. This object is valid only for modems which have cmManageable to be true.	callsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.47.1.3.3.1.11`
cmGreaterThan14400Connections deprecated The number of connections initially established at a modulation speed of greater than 14400 bits per second. This object is valid only for modems which have cmManageable to be true.	callsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.47.1.3.3.1.12`
cmNoCarriers A counter that indicates the number of times that the disconnect reason is no carrier. This object is valid only for modems which have cmManageable to be true.	callsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.47.1.3.3.1.13`
cmLinkFailures A counter that indicates the number of times that the disconnect reason is link failure. This object is valid only for modems which have cmManageable to be true.	callsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.47.1.3.3.1.14`
cmProtocolErrors A counter that indicates the number of times that the out of band protocol error occurred. This object is valid only for modems which have cmManageable to be true.	errorsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.47.1.3.3.1.15`
cmPollingTimeouts A counter that indicates the number of times that the out of band protocol time-out error occurred. This object is valid only for modems which have cmManageable to be true.	errorsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.47.1.3.3.1.16`
cmTotalCallDuration A counter that indicates total call duration on the modem. This includes the duration of all previous calls.	secondsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.47.1.3.3.1.17`

cmLineSpeedStatisticsTable

table

.1.3.6.1.4.1.9.9.47.1.3.4 · 1 row entry · 4 columns

Open in standard view

A collection of objects that describe the intial modem 
line speeds and connections

cmLineSpeedStatisticsEntry entry .1.3.6.1.4.1.9.9.47.1.3.4.1

An entry in the table, containing initial speed and
connection information about a single modem.

Indexes

cmSlotIndex cmPortIndex cmInitialLineSpeed

Column	Syntax	OID
cmInitialLineSpeed A discrete initial speed at which the given line may operate	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.47.1.3.4.1.1`
cmInitialLineConnections deprecated The number of connections initially established at a given modulation speed. An instance of this object will be only present for those speeds where one or more connections have occurred	callsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.47.1.3.4.1.2`
cmInitialTxLineConnections The number of Transmit connections initially established at a given modulation speed. An instance of this object will be only present for those speeds where one or more connections have occurred	callsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.47.1.3.4.1.3`
cmInitialRxLineConnections The number of Receive connections initially established at a given modulation speed. An instance of this object will be only present for those speeds where one or more connections have occurred	callsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.9.9.47.1.3.4.1.4`