cmShutdown
CISCO-MODEM-MGMT-MIB ·
.1.3.6.1.4.1.9.9.47.1.3.2.1.4
Object
This object is used to put modem out of service, i.e. modem
cannot make calls or answer calls. This is a hard busyout
command to bring the modem out of service immediately without
waiting for the call to be ended normally. After modem is
shutdown, the following commands can be applied to those
modems - reset, bad modem, download modem firmware, etc.
The value of true(1) indicates the hard busyout has been
issued to the modem. The value of false(2) indicates the
modem has not been hard busyout.
Context
- MIB
- CISCO-MODEM-MGMT-MIB
- OID
.1.3.6.1.4.1.9.9.47.1.3.2.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cmLineConfigEntry
- Table
- cmLineConfigTable
- Siblings
- 5
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cmATModePermit Direct Connect session is used for test and debugging purpose
by using the modem AT commands through the out of band
management port when cmManageable is true.
Th… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.47.1.3.2.1.1 |
| cmStatusPolling Modem status and events can be polled through the out of band
management port when the cmManageable is true.
This object specifies whether this status polling feat… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.47.1.3.2.1.2 |
| cmBusyOutRequest This object is used to put modem out of service, i.e. modem
cannot make calls or answer calls. If the modem to
be busyout is handling a call, the busyout action will
be taken afte… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.47.1.3.2.1.3 |
| cmHoldReset A command hold-reset will put the state of modem into reset mode
until an inverse command to bring modem out of RESET mode.
During the period of reset mode, this modem can not be … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.47.1.3.2.1.5 |
| cmBad This object can hold modem out of service and marks the modem
as suspected or proven to be bad. During the router start-up
initialization sequence, modem back-to-back tests will… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.47.1.3.2.1.6 |