cmDisconnectReason

CISCO-MODEM-MGMT-MIB · .1.3.6.1.4.1.9.9.47.1.3.1.1.8
MIB view Table view

Object

column Enumeration 
Indicates the reason that the last connection or call attempt
disconnected.  The meaning of each reason code is explained
below:
              
    unknown: the failure reason is unknown or there has been
    no previous call.
              
    lostCarrier: the call was disconnected because the loss
    of carrier.
              
    noCarrier: the dial out attempt has failed because the
    modem detects no carrier.
              
    noDialTone: the dial out attempt has failed because the
    modem failed to detect a dial tone.
              
    busy: the call attempt failed because the modem detected
    a busy signal.
              
    modemWatchdogTimeout: the modem internal watchdog timer
    has expired.
              
    dtrDrop: DTR has been turned off while the modem is to
    disconnect on DTR drop.
              
    userHangup: normal disconnect where the user hangs up call.
              
    compressionProblem: the call is disconnected due to a
    problem detected during compression in the modem.
              
    retrainFailure: the modem did not successfully train and
    reach data mode on the previous connections.
              
    remoteLinkDisconnect: the remote link disconnected the
    connection.
              
    abort: the call was aborted.
              
    inactivityTimeout: the modem automatically hangs up because
    data is not sent or received within the inactivity time out.
              
    dialStringError: the dialed phone number is invalid.
              
    linkFailure: the modem detects a link failure.
              
    modulationError: the modem detects a modulation error.
              
    dialTimeout: the modem times out while attempting to dial.
              
    remoteHangup: the remote side hangs up the connection.
              
    mnp10ProtocolError: MNP10 Protocol Error.
              
    lapmProtocolError: LAPM Protocol Error.
              
    faxClass2Error: Fax Class 2 Error.
              
    trainupFailure: failure to trainup with a remote peer.
              
    fallbackTerminate: User has EC fallback set to disconnect.
              
    excessiveEC: Link loss due to excessive EC retransmissions.
    EC packet transmit limit exceeded.
              
    hostDrop: Host initiated link drop.
              
    terminate: Lost Carrier Microcom HDMS product relating to
    password security issues.
              
    autoLogonError: An autologon sequence did not complete
    successfully.
              
    ccpNotSeen: The Credit Card Prompt was not detected.
              
    callbackFailed: Applies to leased line connection.  If after
    a switched line dialback due to a leased line connection
    failure, the switched line connection also fails and a
    connection can still not be made on the leased line, a
    disconnect occurs with this reason set.
              
    blacklist: In coutries that support blacklisting, an attempt
    was made to go off hook with a null dial string (ATD).
              
    lapmTimeout: Timed out waiting for a reply from remote.
              
    reliableLinkTxTimeout: Have not received the
    link acknowledgement in the first 30 seconds of the
    connection.
              
    dspAccessFailure: Timed out trying to access the
    DSP chip.
              
    cdOffTimeout: Timed out waiting for carrier to return
    after a retrain or rate renegotiation.
              
    codewordSizeMismatch: The codeword size are mismatched.
              
    dspDownloadFailure: Error during the DSP code download.
    The time taken to recover and repeat the download
    would take too long to complete the handshake.

Context

MIB
CISCO-MODEM-MGMT-MIB
OID
.1.3.6.1.4.1.9.9.47.1.3.1.1.8
Type
column
Access
readonly
Status
current
Parent
cmLineStatusEntry
Table
cmLineStatusTable
Siblings
16

Syntax

Enumeration

Values & Constraints

Enumerated Values
1unknown
2lostCarrier
3noCarrier
4noDialTone
5busy
6modemWatchdogTimeout
7dtrDrop
8userHangup
9compressionProblem
10retrainFailure
11remoteLinkDisconnect
12abort
13inactivityTimeout
14dialStringError
15linkFailure
16modulationError
17dialTimeout
18remoteHangup
19mnp10ProtocolError
20lapmProtocolError
21faxClass2Error
22trainupFailure
23fallbackTerminate
24excessiveEC
25hostDrop
26terminate
27autoLogonError
28ccpNotSeen
29callbackFailed
30blacklist
31lapmTimeout
32reliableLinkTxTimeout
33dspAccessFailure
34cdOffTimeout
35codewordSizeMismatch
36dspDownloadFailure
37modemDrNone
38modemDrSoftwareReset
39modemDrEcTerminated
40modemDrBadMnp5Rxdata
41modemDrBadV42bisRxdata
42modemDrBadCopState
43modemDrAth
44modemDrAborted
45modemDrConnectTimeout
46modemDrResetDsp
47modemDrNoCarrier
48modemDrNoAbtDetected
49modemDrTrainupFailure
50modemDrRetrainLimit
51modemDrAbtEndFailure
52modemDrNoLr
53modemDrLrParam1
54modemDrLrIncompat
55modemDrRetransmitLimit
56modemDrInactivity
57modemDrProtocolError
58modemDrFallbackTerminate
59modemDrNoXid
60modemDrXidIncompat
61modemDrDisc
62modemDrDm
63modemDrBadNr
64modemDrSabmeOnline
65modemDrXidOnline
66modemDrLrOnline
67modemDrBadCmnd
68modemDrFrmrBadCmnd
69modemDrFrmrData
70modemDrFrmrLength
71modemDrFrmrBadNr
72modemDrLdNoLr
73modemDrLdLrParam1
74modemDrLdLrIncompat
75modemDrLdRetransLimit
76modemDrLdInactivity
77modemDrLdProtocol
78modemDrLdUser
79modemDrHostNonspecific
80modemDrHostBusy
81modemDrHostNoAnswer
82modemDrHostDtr
83modemDrHostAth
84modemDrHostNoDialtone
85modemDrHostNoCarrier
86modemDrHostAck
87modemDrMohClrd
88modemDrMohTimeout
89modemDrCotAck
90modemDrCotNak1
91modemDrCotNak2
92modemDrCotOff
93modemDrCotTimeout
94modemDrDcIllegalCodewordStepup
95modemDrDcIllegalTokenEmptyNode
96modemDrDcIllegalTokenTooLarge
97modemDrDcReservedCommand
98modemDrDcIllegalCharacterSizeStepup
99modemDrDcRxDictionaryFull
100modemDrDcRxHistoryFull
101modemDrDcRxStringSizeExceeded
102modemDrDcNegotiationError
103modemDrDcCompressionError

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cmInterface
The interface that this modem is connected.
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.9.9.47.1.3.1.1.1
cmCallPhoneNumber
The dialed outgoing telephone number of the current or previous call.
columnOctetString.1.3.6.1.4.1.9.9.47.1.3.1.1.10
cmCallerID
The incoming caller identification of the current or previous call if this entry is not in the connected state.
columnOctetString.1.3.6.1.4.1.9.9.47.1.3.1.1.11
cmModulationSchemeUsed
The modem modulation scheme used in the current or previous call. This object is valid only for modems which have cmManageable to be true.
columnEnumeration.1.3.6.1.4.1.9.9.47.1.3.1.1.12
cmProtocolUsed
The modem protocol used in the current or previous call. This object is valid only for modems which have cmManageable to be true.
columnEnumeration.1.3.6.1.4.1.9.9.47.1.3.1.1.13
cmTXRate
The speed of modem transmit rate of the current or previous call in bits per second. This object is valid only for modems which have cmManageable to be true.
columnbits/second SNMPv2-SMIGauge32.1.3.6.1.4.1.9.9.47.1.3.1.1.14
cmRXRate
The speed of modem receive rate of the current or previous call in bits per second. This object is valid only for modems which have cmManageable to be true.
columnbits/second SNMPv2-SMIGauge32.1.3.6.1.4.1.9.9.47.1.3.1.1.15
cmTXAnalogSignalLevel
The modem transmit analog signal level in the current or previous call. The unit used is in dBm. This object is valid for modems that have cmManageable set to true(1) otherwis…
columndBm Integer32.1.3.6.1.4.1.9.9.47.1.3.1.1.16
cmRXAnalogSignalLevel
The modem transmit analog signal level in the current or previous call. The unit used is in dBm. This object is valid for modems that have cmManageable set to true(1) otherwis…
columndBm Integer32.1.3.6.1.4.1.9.9.47.1.3.1.1.17
cmGroup
The modem group number that the modem may be in.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.47.1.3.1.1.2
cmManufacturerID
A textual description to identify the modem, including the manufacturer's name and type of modem.
columnOctetString.1.3.6.1.4.1.9.9.47.1.3.1.1.3
cmProductDetails
A textual description of the modem, including hardware revision number, firmware revision number, feature set and optionally, its serial number.
columnOctetString.1.3.6.1.4.1.9.9.47.1.3.1.1.4
cmManageable
The Manageable modem allows to be accessed through the out of band management port in which the modem statistic data can be retrieved, and the Direct Connect session can be used …
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.47.1.3.1.1.5
cmState
Indicates the current state of modem. The meaning of each state code is explained below: unknown: the current state of the modem is unknown. …
columnEnumeration.1.3.6.1.4.1.9.9.47.1.3.1.1.6
cmCallDirection
The modem can be used either as an incoming call or outgoing call. This object specifies the direction of the current or previous call.
columnEnumeration.1.3.6.1.4.1.9.9.47.1.3.1.1.7
cmCallDuration
This object specifies the call duration of the current or previous call.
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.9.9.47.1.3.1.1.9