cmModulationSchemeUsed

CISCO-MODEM-MGMT-MIB · .1.3.6.1.4.1.9.9.47.1.3.1.1.12

Object

column Enumeration

The modem modulation scheme used in the current or previous 
call.  This object is valid only for modems which have 
cmManageable to be true.

Context

MIB: CISCO-MODEM-MGMT-MIB
OID: .1.3.6.1.4.1.9.9.47.1.3.1.1.12
Type: column
Access: readonly
Status: current
Parent: cmLineStatusEntry
Table: cmLineStatusTable
Siblings: 16

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	unknown
`2`	bell103a
`3`	bell212a
`4`	v21
`5`	v22
`6`	v22bis
`7`	v32
`8`	v32bis
`9`	vfc
`10`	v34
`11`	v17
`12`	v29
`13`	v33
`14`	k56flex
`15`	v23
`16`	v32terbo
`17`	v34plus
`18`	v90
`19`	v27ter
`20`	v110
`21`	piafs

Related Objects

Sibling Objects

Object	Type	Syntax	OID
cmInterface The interface that this modem is connected.	column	IF-MIBInterfaceIndex	`.1.3.6.1.4.1.9.9.47.1.3.1.1.1`
cmCallPhoneNumber The dialed outgoing telephone number of the current or previous call.	column	OctetString	`.1.3.6.1.4.1.9.9.47.1.3.1.1.10`
cmCallerID The incoming caller identification of the current or previous call if this entry is not in the connected state.	column	OctetString	`.1.3.6.1.4.1.9.9.47.1.3.1.1.11`
cmProtocolUsed The modem protocol used in the current or previous call. This object is valid only for modems which have cmManageable to be true.	column	Enumeration	`.1.3.6.1.4.1.9.9.47.1.3.1.1.13`
cmTXRate The speed of modem transmit rate of the current or previous call in bits per second. This object is valid only for modems which have cmManageable to be true.	column	bits/second SNMPv2-SMIGauge32	`.1.3.6.1.4.1.9.9.47.1.3.1.1.14`
cmRXRate The speed of modem receive rate of the current or previous call in bits per second. This object is valid only for modems which have cmManageable to be true.	column	bits/second SNMPv2-SMIGauge32	`.1.3.6.1.4.1.9.9.47.1.3.1.1.15`
cmTXAnalogSignalLevel The modem transmit analog signal level in the current or previous call. The unit used is in dBm. This object is valid for modems that have cmManageable set to true(1) otherwis…	column	dBm Integer32	`.1.3.6.1.4.1.9.9.47.1.3.1.1.16`
cmRXAnalogSignalLevel The modem transmit analog signal level in the current or previous call. The unit used is in dBm. This object is valid for modems that have cmManageable set to true(1) otherwis…	column	dBm Integer32	`.1.3.6.1.4.1.9.9.47.1.3.1.1.17`
cmGroup The modem group number that the modem may be in.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.9.9.47.1.3.1.1.2`
cmManufacturerID A textual description to identify the modem, including the manufacturer's name and type of modem.	column	OctetString	`.1.3.6.1.4.1.9.9.47.1.3.1.1.3`
cmProductDetails A textual description of the modem, including hardware revision number, firmware revision number, feature set and optionally, its serial number.	column	OctetString	`.1.3.6.1.4.1.9.9.47.1.3.1.1.4`
cmManageable The Manageable modem allows to be accessed through the out of band management port in which the modem statistic data can be retrieved, and the Direct Connect session can be used …	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.47.1.3.1.1.5`
cmState Indicates the current state of modem. The meaning of each state code is explained below: unknown: the current state of the modem is unknown. …	column	Enumeration	`.1.3.6.1.4.1.9.9.47.1.3.1.1.6`
cmCallDirection The modem can be used either as an incoming call or outgoing call. This object specifies the direction of the current or previous call.	column	Enumeration	`.1.3.6.1.4.1.9.9.47.1.3.1.1.7`
cmDisconnectReason Indicates the reason that the last connection or call attempt disconnected. The meaning of each reason code is explained below: unknown: the failure reason is …	column	Enumeration	`.1.3.6.1.4.1.9.9.47.1.3.1.1.8`
cmCallDuration This object specifies the call duration of the current or previous call.	column	SNMPv2-SMITimeTicks	`.1.3.6.1.4.1.9.9.47.1.3.1.1.9`