cmManufacturerID
CISCO-MODEM-MGMT-MIB ·
.1.3.6.1.4.1.9.9.47.1.3.1.1.3
Object
column
OctetString
A textual description to identify the modem, including the manufacturer's name and type of modem.
Context
- MIB
- CISCO-MODEM-MGMT-MIB
- OID
.1.3.6.1.4.1.9.9.47.1.3.1.1.3- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cmLineStatusEntry
- Table
- cmLineStatusTable
- Siblings
- 16
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-79
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cmInterface The interface that this modem is connected. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.9.9.47.1.3.1.1.1 |
| cmCallPhoneNumber The dialed outgoing telephone number of the current or
previous call. | column | OctetString | .1.3.6.1.4.1.9.9.47.1.3.1.1.10 |
| cmCallerID The incoming caller identification of the current or
previous call if this entry is not in the connected state. | column | OctetString | .1.3.6.1.4.1.9.9.47.1.3.1.1.11 |
| cmModulationSchemeUsed The modem modulation scheme used in the current or previous
call. This object is valid only for modems which have
cmManageable to be true. | column | Enumeration | .1.3.6.1.4.1.9.9.47.1.3.1.1.12 |
| cmProtocolUsed The modem protocol used in the current or previous call.
This object is valid only for modems which have cmManageable
to be true. | column | Enumeration | .1.3.6.1.4.1.9.9.47.1.3.1.1.13 |
| cmTXRate The speed of modem transmit rate of the current or previous
call in bits per second. This object is valid only for modems
which have cmManageable to be true. | column | bits/second SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.47.1.3.1.1.14 |
| cmRXRate The speed of modem receive rate of the current or previous
call in bits per second. This object is valid only for modems
which have cmManageable to be true. | column | bits/second SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.47.1.3.1.1.15 |
| cmTXAnalogSignalLevel The modem transmit analog signal level in the current or
previous call. The unit used is in dBm. This object
is valid for modems that have cmManageable set to true(1)
otherwis… | column | dBm Integer32 | .1.3.6.1.4.1.9.9.47.1.3.1.1.16 |
| cmRXAnalogSignalLevel The modem transmit analog signal level in the current or
previous call. The unit used is in dBm. This object
is valid for modems that have cmManageable set to true(1)
otherwis… | column | dBm Integer32 | .1.3.6.1.4.1.9.9.47.1.3.1.1.17 |
| cmGroup The modem group number that the modem may be in. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.47.1.3.1.1.2 |
| cmProductDetails A textual description of the modem, including hardware revision
number, firmware revision number, feature set and optionally,
its serial number. | column | OctetString | .1.3.6.1.4.1.9.9.47.1.3.1.1.4 |
| cmManageable The Manageable modem allows to be accessed through the out of
band management port in which the modem statistic data can be
retrieved, and the Direct Connect session can be used … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.47.1.3.1.1.5 |
| cmState Indicates the current state of modem. The meaning of each
state code is explained below:
unknown: the current state of the modem is unknown.
… | column | Enumeration | .1.3.6.1.4.1.9.9.47.1.3.1.1.6 |
| cmCallDirection The modem can be used either as an incoming call or
outgoing call. This object specifies the direction of
the current or previous call. | column | Enumeration | .1.3.6.1.4.1.9.9.47.1.3.1.1.7 |
| cmDisconnectReason Indicates the reason that the last connection or call attempt
disconnected. The meaning of each reason code is explained
below:
unknown: the failure reason is … | column | Enumeration | .1.3.6.1.4.1.9.9.47.1.3.1.1.8 |
| cmCallDuration This object specifies the call duration of the current
or previous call. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.9.9.47.1.3.1.1.9 |