CISCO-DSL-PROVISION-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
10
Rows
10
Columns
100

cdslNrpIpAddressTable

table
.1.3.6.1.4.1.9.10.30.1.1.3 · 1 row entry · 2 columns
Open in standard view 
This table reflects the IP addresses of each NRP
in the system.
cdslNrpIpAddressEntry entry .1.3.6.1.4.1.9.10.30.1.1.3.1
These entries are used to store the IP Addresses of
NRP cards that are inserted in the indexed slot.
The IP addresses are used to access these cards.
Indexes
cdslNrpSlotIndex
Column Syntax OID
cdslNrpSlotIndex
The object specifies the identifier of a slot
containing a NRP.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.9.10.30.1.1.3.1.1
cdslNrpIpAddress
The object specifies the IP addresses associated with the
NRP contained in the slot identified by cdslNrpSlotIndex.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.9.10.30.1.1.3.1.2

cdslVirtualTemplateNumberTable

table
.1.3.6.1.4.1.9.10.30.1.2.1 · 1 row entry · 2 columns
Open in standard view 
This table reflects the number of virtual template
that are presently set up in each NRP.
          
A virtual template interface is a logical entity 
a configuration for a serial-interface but not tied to a 
physical interface - thatcan be applied dynamically as needed.
cdslVirtualTemplateNumberEntry entry .1.3.6.1.4.1.9.10.30.1.2.1.1
Entries are read only.
Indexes
cdslNrpSlotIndex
Column Syntax OID
cdslMaxVirtualTemplates
The object specifies the maximum number of virtual
templates allowed in one single NRP.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.9.10.30.1.2.1.1.1
cdslVirtualTemplates
This object indicates the number of virtual templates
presently set up in each NRP identified by cdslNrpSlotIndex.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.9.10.30.1.2.1.1.2

cdslVirtualTemplateTable

table
.1.3.6.1.4.1.9.10.30.1.2.2 · 1 row entry · 20 columns
Open in standard view 
This table includes the virtual templates in the NRP
identified by cNrpSlotIndex.
          
Though a virtual template is often called a virtual 
template interface, it is not reflected in the ifTable.
cdslVirtualTemplateEntry entry .1.3.6.1.4.1.9.10.30.1.2.2.1
User may create a new entry or delete an existing
entry.

Entries may be created without explicitly setting
cdslVTRowStatus.

While the row status is 'active', objects having
read-create access…
Indexes
cdslNrpSlotIndex cdslVTIndex
Column Syntax OID
cdslVTIndex
This object represents an arbitrary index used to
identify the virtual template entry.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.9.10.30.1.2.2.1.1
cdslVTIpAddressMethod
This object indicates how an IP address is obtained
to be associated with this virtual template.
The actual parameters of these methods are indicated
by the objects defined after.

none -- means n…
Enumerationr/w
Enumerated Values:
0none
1ipAddress
2interfaceIp
3negotiate
 .1.3.6.1.4.1.9.10.30.1.2.2.1.2
cdslVTIpAddress
This object specifies the IP address associated with
this virtual template entry.

This object is only valid when cdslVTIpAddressMethod
is 'ipAddress'. To set the value correctly,
this object shall be se…
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.9.10.30.1.2.2.1.3
cdslVTIpAddressMask
This object specifies the IP address mask.

This object is only valid when cdslVTIpAddressMethod
is 'ipAddress'. To set the value correctly,
this object shall be set in the same packet as
cdslVTIpAddress…
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.9.10.30.1.2.2.1.4
cdslVTIpIfIndex
This object specifies the ifIndex of the interface,
whose IP address will be used for the virtual template
entry. Any interface with an IP address in the routing
processor can be selected.

This object i…
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.10.30.1.2.2.1.5
cdslVTPeerIpAddressMethod
This object indicates how an IP address is obtained
when a peer requesting one.
The actual parameters of these methods are indicated
by the objects defined after.

none -- means no IP address associa…
Enumerationr/w
Enumerated Values:
0none
1negotiate
2ipAddressPool
 .1.3.6.1.4.1.9.10.30.1.2.2.1.6
cdslVTPeerIpAddrPool
This object is used to specify peer default local IP address
pool name.

This object is only valid when cdslVTPeerIpAddressMethod
is 'ipAddressPool'. To set the value correctly, this
object shall be set i…
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.9.10.30.1.2.2.1.7
cdslVTPppAuthChap
This object is used to specify to use Challenge Handshake
Authentication Protocol (CHAP) authentication method and
the order it is used.

The value zero indicates that CHAP is not used.

See…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.10.30.1.2.2.1.8
cdslVTPppAuthMSChap
This object is used to specify the use of Microsoft's
CHAP (MSCHAP) authentication method and the order it is used.

The value zero indicates that MSCHAP is not used.

See the description of …
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.10.30.1.2.2.1.9
cdslVTPppAuthPap
This object is used to specify whether to use Password
Authentication Protocol (PAP) authentication method and
the order it is used.

This object is one of multiple objects used to specify
authentication…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.10.30.1.2.2.1.10
cdslVTPppChapHost
This object is used to specify the PPP CHAP host name.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.9.10.30.1.2.2.1.11
cdslVTPppChapPassword
This object is used to specify the PPP CHAP password.
OctetStringr/w
Constraints:
range: 0-25
 .1.3.6.1.4.1.9.10.30.1.2.2.1.12
cdslVTPppChapEncrypType
This object is used to specify whether to encrypt
the PPP CHAP password.

Only effective when cdslVTPppChapPassword is non-empty.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.10.30.1.2.2.1.13
cdslVTPppChapRefuse
The object is used to refuse CHAP authentication
from peers requesting it.

To disable this function set the value to no.

RefuseCallinOnly indicating the system to refuse to
answer CHAP …
Enumerationr/w
Enumerated Values:
1no
2refuse
3refuseCallinOnly
 .1.3.6.1.4.1.9.10.30.1.2.2.1.14
cdslVTPppChapWaitPeer
This object is used to specify that the system will
not authenticate to a peer requesting CHAP authentication
until after the peer has authenticated to this system.

To disable this function, set this obj…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.10.30.1.2.2.1.15
cdslVTPppPapUserName
This object is used to specify the PPP PAP user
name that will be sent to a peer device.

Please refer to the description of cdslVTPppPassword
to see the interaction.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.9.10.30.1.2.2.1.16
cdslVTPppPapPassword
This object is used to specify the PPP PAP authentication
password.

The system only utilizes the user name and password when
both cdslVTPppUserName and cdslVTPppPassword are
non-empty strings. To enfo…
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.9.10.30.1.2.2.1.17
cdslVTPppPapEncrypType
This object is used to specify whether to encrypt
the PAP password.

Only effective when cdslVTPppPapPassword
is non-empty.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.10.30.1.2.2.1.18
cdslVTPppUseTacacs
This object is used to specify whether to enable
TACACS for PPP authentication.

SingleLine means yes and plus to accept username and
password in the username field that is in single line.
Enumerationr/w
Enumerated Values:
1no
2yes
3singleLine
 .1.3.6.1.4.1.9.10.30.1.2.2.1.19
cdslVTRowStatus
This object is used to create a new row or modify
or delete an existing row in this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.10.30.1.2.2.1.20

cdslLocalIpAddrPoolNumberTable

table
.1.3.6.1.4.1.9.10.30.1.3.1 · 1 row entry · 2 columns
Open in standard view 
This table indicates the number of IP address pools
that are presently set up in each NRP.
cdslLocalIpAddrPoolNumberEntry entry .1.3.6.1.4.1.9.10.30.1.3.1.1
Entries are read only.
Indexes
cdslNrpSlotIndex
Column Syntax OID
cdslMaxLocalIpAddrPools
Maximum number of local IP address pools allowed in a NRP.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.9.10.30.1.3.1.1.1
cdslLocalIpAddrPools
The number of local IP address pools presently set up.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.9.10.30.1.3.1.1.2

cdslLocalIpAddrPoolTable

table
.1.3.6.1.4.1.9.10.30.1.3.2 · 1 row entry · 3 columns
Open in standard view 
This table defines the IP local address pool.
          
An IP address pool may have a single entry in 
the table. The ranges of a pool are represented
in the cdslLocalIPAddrRangeTable.
cdslLocalIpAddrPoolEntry entry .1.3.6.1.4.1.9.10.30.1.3.2.1
This list contains IP pool entry.

The entry is read-only. The creation or the deletion
of an entry will be a by-product of the entry in the
cdslLocalIPAddrRangeTable. When an entry is created
and activate…
Indexes
cdslNrpSlotIndex cdslLocalIpAddrPoolName
Column Syntax OID
cdslLocalIpAddrPoolName
A unique and non-empty string for the pool.
The name can not be modified once created.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.9.10.30.1.3.2.1.1
cdslLocalIpAddrPoolFreeAddresses
The number of IP addresses still available for use in
the pool. Please notice that the number is for the
whole pool, not for the individual range.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.9.10.30.1.3.2.1.2
cdslLocalIpAddrPoolInUseAddresses
The number of addresses currently in use in the pool.
Please notice that the number is for the whole pool,
not for the individual range.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.9.10.30.1.3.2.1.3

cdslLocalIpAddrRangeTable

table
.1.3.6.1.4.1.9.10.30.1.3.3 · 1 row entry · 3 columns
Open in standard view 
This table defines the IP local address pool ranges.
          
An IP address pool may have a single entry or multiple 
entries in the table, since an IP address pool can have 
multiple dis-continuous ranges. Each range will have 
a separate entry in the table.
cdslLocalIpAddrRangeEntry entry .1.3.6.1.4.1.9.10.30.1.3.3.1
This list contains IP pool range entry.

User may create a new entry or delete an existing entry.

When creating an entry, after its activation, an entry
in the cdslLocalIpAddrPoolTable will ex…
Indexes
cdslNrpSlotIndex cdslLocalIpAddrRangeLowAddr cdslLocalIpAddrRangeHighAddr cdslLocalIpAddrPoolName
Column Syntax OID
cdslLocalIpAddrRangeLowAddr
The low range of this IP address pool range.
This must be lower than the pool's high range.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.9.10.30.1.3.3.1.1
cdslLocalIpAddrRangeHighAddr
The high range of this IP address pool range.
This must be higher than the pool's low range.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.9.10.30.1.3.3.1.2
cdslLocalIpAddrRangeRowStatus
This object is used to create a new row or delete an
existing row in this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.10.30.1.3.3.1.3

cdslPppOverAtmPvcNumberTable

table
.1.3.6.1.4.1.9.10.30.1.4.1 · 1 row entry · 1 columns
Open in standard view 
This table reflects the number of PVCs of PPP
encapsulation presently set up in each NRP.
cdslPppOverAtmPvcNumberEntry entry .1.3.6.1.4.1.9.10.30.1.4.1.1
Each entry represents the responding NRP.
Indexes
cdslNrpSlotIndex
Column Syntax OID
cdslPppOverAtmPvcs
The number of atm pvcs that are presently set up with
PPP encapsulation. The number of all atm PVCs and
the maximum number of PVCs are provided by AToM Mib.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.9.10.30.1.4.1.1.1

cdslAtmPvcTable

table
.1.3.6.1.4.1.9.10.30.1.4.2 · 1 row entry · 28 columns
Open in standard view 
This table includes configuration parameters
for ATM PVCs with PPP encapsulation. 
          
The vc-mode ATM PVC management approach is used as 
the PVC creating method, which greatly simplifies 
configuration by using of vc-class.
          
The PVCs which were created using atm pvc cli commands 
can only be read or deleted from snmp. In case of reading,
only the values of vpi, vci, sub-interface number, 
encapsulation, virtual template number and row status 
are meaningful. When trying to set any object of these PVCs, 
a GEN_ERROR returns except for the row status object. 
To indicate a PVC is created with old pvc syntax, 
the value of cdslAtmPvcClass will be set into '!'.
cdslAtmPvcEntry entry .1.3.6.1.4.1.9.10.30.1.4.2.1
The IfIndex by which the table is indexed, is the ATM
interface index in which the PVC is created.

The only object that is allowed to change the value
while the row status is 'active' is cdslAtmPvcClass.
…
Indexes
cdslNrpSlotIndex IF-MIBifIndex cdslAtmPvcVpi cdslAtmPvcVci
Column Syntax OID
cdslAtmPvcVpi
The virtual path identifier of the PVC. Please note
that it is routing processor's VPI number.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.10.30.1.4.2.1.1
cdslAtmPvcVci
The virtual channel identifier of the PVC. Please note
that it is routing processor's VCI number.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.10.30.1.4.2.1.2
cdslAtmPvcName
This object can be used to identify the PVC.
Unique name for each PVC is desired if assigned.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.9.10.30.1.4.2.1.3
cdslAtmPvcSubIfNumber
This object indicates the ios sub-interface number
if this PVC belongs to an atm sub-interface.

Once the pvc exists, the value can not be modified.

If the PVC is created under the ATM int…
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.10.30.1.4.2.1.4
cdslAtmPvcClass
This object indicates the vc-class to inherit when
the named vc-class exists.

If the object is to set into an empty string, the default
value 'default-vc-class' will be used.
If the 'default-vc-class' …
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.9.10.30.1.4.2.1.5
cdslAtmPvcQosType
Quality of Service type of this PVC.
Enumeration
Enumerated Values:
0ubrDefault
1cbr
2ubr
3ubrPlus
4vbrRt
5vbrNrt
6abr
7max
 .1.3.6.1.4.1.9.10.30.1.4.2.1.6
cdslAtmPvcAbrPCR
Availabe bit rate (Abr) peak cell rate(PCR) of this PVC.
kbpsUnsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.9.10.30.1.4.2.1.7
cdslAtmPvcAbrMCR
Abr Minimum Guaranteed Cell Rate(MCR) of this PVC.
kbpsUnsigned32
Constraints:
range: 0-1
 .1.3.6.1.4.1.9.10.30.1.4.2.1.8
cdslAtmPvcAbrIORIF
Abr inverse of rate increase factor (1/rif) of this PVC.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.9.10.30.1.4.2.1.9
cdslAtmPvcAbrIORDF
Abr inverse of rate decrease factor (1/rdf) of this PVC.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.9.10.30.1.4.2.1.10
cdslAtmPvcBroadcast
This object indicates whether to allow broadcast or not.
Enumeration
Enumerated Values:
0false
1true
2unknown
 .1.3.6.1.4.1.9.10.30.1.4.2.1.11
cdslAtmPvcEncapsulation
This object indicates encapsulation method of this PVC.
Enumeration
Enumerated Values:
0default
1aal5snap
2aal5mux
3aal5nlpid
4aal34smds
5aal5ilmi
6aal5qsaal
7aal5ciscoppp
 .1.3.6.1.4.1.9.10.30.1.4.2.1.12
cdslAtmPvcMuxLinkType
This object can be used to This object is used to specify
the link type if the encapsulation is aal5mux.

1 -- ip and
2 -- ppp.
Enumerationr/w
Enumerated Values:
1ip
2ppp
 .1.3.6.1.4.1.9.10.30.1.4.2.1.13
cdslAtmPvcVirtualTemplate
The virtual template number configured for the PVC.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.10.30.1.4.2.1.14
cdslAtmPvcILMIManage
This object indicates whether to ilmi manage or not.
Enumeration
Enumerated Values:
0false
1true
2unknown
 .1.3.6.1.4.1.9.10.30.1.4.2.1.15
cdslAtmPvcInarp
This object indicates the InARP Frequency in minutes
(Only meaningful in aal5snap encapsulation).
Unsigned32
Constraints:
range: 1-60
 .1.3.6.1.4.1.9.10.30.1.4.2.1.16
cdslAtmPvcOamRetryUpCount
This object indicates the OAM retry count before declaring
a VC is up.
Unsigned32
Constraints:
range: 1-600
 .1.3.6.1.4.1.9.10.30.1.4.2.1.17
cdslAtmPvcOamRetryDownCount
This object indicates the OAM retry count before declaring
a VC is down.
Unsigned32
Constraints:
range: 1-600
 .1.3.6.1.4.1.9.10.30.1.4.2.1.18
cdslAtmPvcOamPvcManaged
This object indicates whether to enable VC management
on OAM in this PVC.
Enumeration
Enumerated Values:
0false
1true
2unknown
 .1.3.6.1.4.1.9.10.30.1.4.2.1.19
cdslAtmPvcOamPvcLF
This object indicates the OAM loopback frequency(seconds)
for this PVC.
Unsigned32
Constraints:
range: 0-600
 .1.3.6.1.4.1.9.10.30.1.4.2.1.20
cdslAtmPvcProtocolIpBC
Pseudo-broadcast on the protocol IP inarp connections or
not (Only meaningful in aal5snap encapsulation).
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.10.30.1.4.2.1.21
cdslAtmPvcProtocolIpxBC
This object indicates whether to allow Pseudo-broadcast
on the protocol IPX inarp connections or not
(Only meaningful in aal5snap encapsulation).
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.10.30.1.4.2.1.22
cdslAtmPvcUbrPCR
This object indicates the Ubr Peak Cell Rate.
kbpsUnsigned32
Constraints:
range: 1-155000
 .1.3.6.1.4.1.9.10.30.1.4.2.1.23
cdslAtmPvcUbrPlusPCR
This object indicates the Ubr+ Peak Cell Rate.
kbpsUnsigned32
Constraints:
range: 1-155000
 .1.3.6.1.4.1.9.10.30.1.4.2.1.24
cdslAtmPvcUbrPlusMCR
This object indicates the Ubr+ Minimum Guaranteed Cell Rate.
kbpsUnsigned32
Constraints:
range: 0-1
 .1.3.6.1.4.1.9.10.30.1.4.2.1.25
cdslAtmPvcVbrNrtPCR
This object indicates the Vbr-Nrt Peak Cell Rate.
kbpsUnsigned32
Constraints:
range: 1-155000
 .1.3.6.1.4.1.9.10.30.1.4.2.1.26
cdslAtmPvcVbrNrtSCR
This object indicates the Vbr-Nrt Sustainable Cell Rate.
kbpsUnsigned32
Constraints:
range: 1-1
 .1.3.6.1.4.1.9.10.30.1.4.2.1.27
cdslAtmPvcRowStatus
This object is used to create a new row or modify
or delete an existing row in this table.

When the row is created, but the minimun set of
parameters is not all set, the status is 'notReady'.
There is no…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.10.30.1.4.2.1.28

cdslVcClassNumberTable

table
.1.3.6.1.4.1.9.10.30.1.5.1 · 1 row entry · 2 columns
Open in standard view 
This table reflects the number of VC classes
that are presently set up in each NRP.
cdslVcClassNumberEntry entry .1.3.6.1.4.1.9.10.30.1.5.1.1
Entries are read only.
Indexes
cdslNrpSlotIndex
Column Syntax OID
cdslMaxVcClasses
This object indicates the maximum number of VC
classes allowed.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.9.10.30.1.5.1.1.1
cdslVcClasses
This object indicates the number of VC classes presently
set in each NRP identified by cdslNrpSlotIndex.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.9.10.30.1.5.1.1.2

cdslVcClassTable

table
.1.3.6.1.4.1.9.10.30.1.5.2 · 1 row entry · 37 columns
Open in standard view 
The entries in this table are vc-classes with at least
one parameter configured. In other words, empty classes 
(with name only) will not be present in this table.
cdslVcClassEntry entry .1.3.6.1.4.1.9.10.30.1.5.2.1
The VC Class entry is read-create.
Each entry represents a VC class.
Indexes
cdslNrpSlotIndex cdslVcClassName
Column Syntax OID
cdslVcClassName
This object is used to identify the vc class.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.9.10.30.1.5.2.1.1
cdslVcClassType
This object indicates the type of the vc class.

Atm is for Asynchronous transfer mode and
funi for frame user network interface.
Enumeration
Enumerated Values:
1atm
2funi
 .1.3.6.1.4.1.9.10.30.1.5.2.1.2
cdslVcClassQosType
This object specifies the QOS type of the vc class.
Enumerationr/w
Enumerated Values:
0ubrDefault
1cbr
2ubr
3ubrPlus
4vbrRt
5vbrNrt
6abr
7max
 .1.3.6.1.4.1.9.10.30.1.5.2.1.3
cdslVcClassAbrPCR
This object specifies Abr Peak Cell Rate.
kbpsInteger32r/w
Constraints:
range: 56-155000
 .1.3.6.1.4.1.9.10.30.1.5.2.1.4
cdslVcClassAbrMcr
This object specifies Minimum Guaranteed Cell Rate.
It shall be smaller than cdslVcClassAbrPCR.
kbpsInteger32r/w
Constraints:
range: 1-155000
 .1.3.6.1.4.1.9.10.30.1.5.2.1.5
cdslVcClassAbrIORIF
This object specifies Abr inverse of rate increase factor
(1/rif) to the power of two.

Note that the actual value in the system is the power of
two of this object. That is, for example, a value 5 of
th…
Integer32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.9.10.30.1.5.2.1.6
cdslVcClassAbrIORDF
Abr inverse of rate decrease factor (1/rdf) to the power
of two.

Note that the actual value is the power of two of this
object. For example, value 5 of this object means
2**5 = 32.

Range …
Integer32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.9.10.30.1.5.2.1.7
cdslVcClassBroadcast
This object indicates whether to allow broadcast or not.
When set the value, do not use unknown.
Enumerationr/w
Enumerated Values:
0false
1true
2unknown
 .1.3.6.1.4.1.9.10.30.1.5.2.1.8
cdslVcClassEncapsulation
This object specifies encapsulation method.
Enumerationr/w
Enumerated Values:
0default
1aal5snap
2aal5mux
3aal5nlpid
4aal34smds
5aal5ilmi
6aal5qsaal
7aal5ciscoppp
 .1.3.6.1.4.1.9.10.30.1.5.2.1.9
cdslVcClassMuxLinkType
This object is used to specify the link type if
the encapsulation is aal5mux.

1 for IP and
2 for PPP.
Enumerationr/w
Enumerated Values:
1ip
2ppp
 .1.3.6.1.4.1.9.10.30.1.5.2.1.10
cdslVcClassVirtualTemplate
The virtual template number. Value zero means not configured.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.10.30.1.5.2.1.11
cdslVcClassIdleTimeout
This object specifies idle timeout.
Integer32r/w
Constraints:
range: 0-2000000
 .1.3.6.1.4.1.9.10.30.1.5.2.1.12
cdslVcClassIdleMTR
This object specifies the minimum traffic rate to keep
the connection.
kbpsInteger32r/w
Constraints:
range: 0-155000
 .1.3.6.1.4.1.9.10.30.1.5.2.1.13
cdslVcClassILMIManage
This object specifies whether to allow ilmi manage or not.
When set the value, do not use unknown.
Enumerationr/w
Enumerated Values:
0false
1true
2unknown
 .1.3.6.1.4.1.9.10.30.1.5.2.1.14
cdslVcClassInarp
This object specifies InARP Frequency in minutes.
Integer32r/w
Constraints:
range: 1-60
 .1.3.6.1.4.1.9.10.30.1.5.2.1.15
cdslVcClassOamRetryUpCount
OAM retry count before declaring a VC is up
Integer32r/w
Constraints:
range: 1-600
 .1.3.6.1.4.1.9.10.30.1.5.2.1.16
cdslVcClassOamRetryDownCount
OAM retry count before declaring a VC is down
Integer32r/w
Constraints:
range: 1-600
 .1.3.6.1.4.1.9.10.30.1.5.2.1.17
cdslVcClassOamPvcManaged
This object specifies whether to enable VC management on
OAM in a PVC. When set the value, do not use unknown.
Enumerationr/w
Enumerated Values:
0false
1true
2unknown
 .1.3.6.1.4.1.9.10.30.1.5.2.1.18
cdslVcClassOamPvcLF
This object specifies the OAM loopback frequency.
secondsInteger32r/w
Constraints:
range: 0-600
 .1.3.6.1.4.1.9.10.30.1.5.2.1.19
cdslVcClassOamSvcManaged
This object specifies whether to enable VC management on
OAM on SVC SVC. When set the value, do not use unknown.
Enumerationr/w
Enumerated Values:
0false
1true
2unknown
 .1.3.6.1.4.1.9.10.30.1.5.2.1.20
cdslVcClassOamSvcLF
This object specifies the OAM loopback frequency for SVC
secondsInteger32r/w
Constraints:
range: 0-600
 .1.3.6.1.4.1.9.10.30.1.5.2.1.21
cdslVcClassProtocolIpBC
This object specifies whether to allow the pseudo-broadcast
on the protocol IP inarp connections or not.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.10.30.1.5.2.1.22
cdslVcClassProtocolIpxBC
This object specifies whether to allow the pseudo-broadcast
on the protocol IPX inarp connections or not.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.10.30.1.5.2.1.23
cdslVcClassTransmitPriority
This object specifies the transmit priority.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.10.30.1.5.2.1.24
cdslVcClassUbrPCR
This object specifies the Ubr Peak Cell Rate.
kbpsInteger32r/w
Constraints:
range: 1-155000
 .1.3.6.1.4.1.9.10.30.1.5.2.1.25
cdslVcClassUbrInputPCR
This object specifies the Ubr Input Peak Cell Rate.
kbpsInteger32r/w
Constraints:
range: 1-155000
 .1.3.6.1.4.1.9.10.30.1.5.2.1.26
cdslVcClassUbrPlusPCR
This object specifies the Ubr+ Peak Cell Rate.
kbpsInteger32r/w
Constraints:
range: 1-155000
 .1.3.6.1.4.1.9.10.30.1.5.2.1.27
cdslVcClassUbrPlusMCR
This object specifies the Ubr+ Minimum Guaranteed Cell Rate.
It shall be smaller than cdslVcClassUbrPlusPCR.
kbpsInteger32r/w
Constraints:
range: 0-155000
 .1.3.6.1.4.1.9.10.30.1.5.2.1.28
cdslVcClassUbrPlusInputPCR
This object specifies the Ubr+ Input Peak Cell Rate.
kbpsInteger32r/w
Constraints:
range: 1-155000
 .1.3.6.1.4.1.9.10.30.1.5.2.1.29
cdslVcClassUbrPlusInputMCR
This object specifies the Ubr+ Input Minimum Cell Rate.
It shall be smaller than cdslVcClassUbrPlusInputPCR.
kbpsInteger32r/w
Constraints:
range: 0-155000
 .1.3.6.1.4.1.9.10.30.1.5.2.1.30
cdslVcClassVbrNrtPCR
This object specifies the Vbr-Nrt Peak Cell Rate.
kbpsInteger32r/w
Constraints:
range: 1-155000
 .1.3.6.1.4.1.9.10.30.1.5.2.1.31
cdslVcClassVbrNrtSCR
This object specifies the Vbr-Nrt Sustainable Cell Rate.
It shall be smaller than cdslVcClassVbrNrtPCR.
kbpsInteger32r/w
Constraints:
range: 1-1
 .1.3.6.1.4.1.9.10.30.1.5.2.1.32
cdslVcClassVbrNrtInputBP
This object specifies the Vbr-Nrt Input Burst Parameter:
rounded on AIP to the nearest 32, used as is on NPM.
Integer32r/w
Constraints:
range: 1-65536
 .1.3.6.1.4.1.9.10.30.1.5.2.1.33
cdslVcClassVbrNrtInputPCR
This object specifies the Vbr-Nrt Input Peak Cell Rate.
kbpsInteger32r/w
Constraints:
range: 1-155000
 .1.3.6.1.4.1.9.10.30.1.5.2.1.34
cdslVcClassVbrNrtInputSCR
This object specifies the Vbr-Nrt Input Sustainable Cell
Rate. It shall be smaller than cdslVcClassVbrNrtInputPCR.
kbpsInteger32r/w
Constraints:
range: 1-1
 .1.3.6.1.4.1.9.10.30.1.5.2.1.35
cdslVcClassVbrNrtInputMBS
This object specifies the Input Maximum Burst Size.
cellsInteger32r/w
Constraints:
range: 1-65536
 .1.3.6.1.4.1.9.10.30.1.5.2.1.36
cdslVcClassRowStatus
This object is used to create a new row or modify
or delete an existing row in this table.

The return value of this object is always 'active',
if the row exists.

To del…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.10.30.1.5.2.1.37