cdslVcClassRowStatus
CISCO-DSL-PROVISION-MIB ·
.1.3.6.1.4.1.9.10.30.1.5.2.1.37
Object
This object is used to create a new row or modify
or delete an existing row in this table.
The return value of this object is always 'active',
if the row exists.
To delete the row, set the value to 'destroy'.
When creating a new row, 'createAndGo' is the default
value and method even if 'createAndWait' is specified.
The row and the VC class will be created.
When deleting a vc class, if there is still reference
to it, it is made invisibile. Otherwise, it is removed
physically.
Context
- MIB
- CISCO-DSL-PROVISION-MIB
- OID
.1.3.6.1.4.1.9.10.30.1.5.2.1.37- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cdslVcClassEntry
- Table
- cdslVcClassTable
- Siblings
- 36
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cdslVcClassName This object is used to identify the vc class. | column | OctetString | .1.3.6.1.4.1.9.10.30.1.5.2.1.1 |
| cdslVcClassMuxLinkType This object is used to specify the link type if
the encapsulation is aal5mux.
1 for IP and
2 for PPP. | column | Enumeration | .1.3.6.1.4.1.9.10.30.1.5.2.1.10 |
| cdslVcClassVirtualTemplate The virtual template number. Value zero means not configured. | column | Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.11 |
| cdslVcClassIdleTimeout This object specifies idle timeout. | column | Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.12 |
| cdslVcClassIdleMTR This object specifies the minimum traffic rate to keep
the connection. | column | kbps Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.13 |
| cdslVcClassILMIManage This object specifies whether to allow ilmi manage or not.
When set the value, do not use unknown. | column | Enumeration | .1.3.6.1.4.1.9.10.30.1.5.2.1.14 |
| cdslVcClassInarp This object specifies InARP Frequency in minutes. | column | Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.15 |
| cdslVcClassOamRetryUpCount OAM retry count before declaring a VC is up | column | Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.16 |
| cdslVcClassOamRetryDownCount OAM retry count before declaring a VC is down | column | Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.17 |
| cdslVcClassOamPvcManaged This object specifies whether to enable VC management on
OAM in a PVC. When set the value, do not use unknown. | column | Enumeration | .1.3.6.1.4.1.9.10.30.1.5.2.1.18 |
| cdslVcClassOamPvcLF This object specifies the OAM loopback frequency. | column | seconds Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.19 |
| cdslVcClassType This object indicates the type of the vc class.
Atm is for Asynchronous transfer mode and
funi for frame user network interface. | column | Enumeration | .1.3.6.1.4.1.9.10.30.1.5.2.1.2 |
| cdslVcClassOamSvcManaged This object specifies whether to enable VC management on
OAM on SVC SVC. When set the value, do not use unknown. | column | Enumeration | .1.3.6.1.4.1.9.10.30.1.5.2.1.20 |
| cdslVcClassOamSvcLF This object specifies the OAM loopback frequency for SVC | column | seconds Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.21 |
| cdslVcClassProtocolIpBC This object specifies whether to allow the pseudo-broadcast
on the protocol IP inarp connections or not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.30.1.5.2.1.22 |
| cdslVcClassProtocolIpxBC This object specifies whether to allow the pseudo-broadcast
on the protocol IPX inarp connections or not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.30.1.5.2.1.23 |
| cdslVcClassTransmitPriority This object specifies the transmit priority. | column | Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.24 |
| cdslVcClassUbrPCR This object specifies the Ubr Peak Cell Rate. | column | kbps Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.25 |
| cdslVcClassUbrInputPCR This object specifies the Ubr Input Peak Cell Rate. | column | kbps Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.26 |
| cdslVcClassUbrPlusPCR This object specifies the Ubr+ Peak Cell Rate. | column | kbps Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.27 |
| cdslVcClassUbrPlusMCR This object specifies the Ubr+ Minimum Guaranteed Cell Rate.
It shall be smaller than cdslVcClassUbrPlusPCR. | column | kbps Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.28 |
| cdslVcClassUbrPlusInputPCR This object specifies the Ubr+ Input Peak Cell Rate. | column | kbps Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.29 |
| cdslVcClassQosType This object specifies the QOS type of the vc class. | column | Enumeration | .1.3.6.1.4.1.9.10.30.1.5.2.1.3 |
| cdslVcClassUbrPlusInputMCR This object specifies the Ubr+ Input Minimum Cell Rate.
It shall be smaller than cdslVcClassUbrPlusInputPCR. | column | kbps Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.30 |
| cdslVcClassVbrNrtPCR This object specifies the Vbr-Nrt Peak Cell Rate. | column | kbps Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.31 |
| cdslVcClassVbrNrtSCR This object specifies the Vbr-Nrt Sustainable Cell Rate.
It shall be smaller than cdslVcClassVbrNrtPCR. | column | kbps Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.32 |
| cdslVcClassVbrNrtInputBP This object specifies the Vbr-Nrt Input Burst Parameter:
rounded on AIP to the nearest 32, used as is on NPM. | column | Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.33 |
| cdslVcClassVbrNrtInputPCR This object specifies the Vbr-Nrt Input Peak Cell Rate. | column | kbps Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.34 |
| cdslVcClassVbrNrtInputSCR This object specifies the Vbr-Nrt Input Sustainable Cell
Rate. It shall be smaller than cdslVcClassVbrNrtInputPCR. | column | kbps Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.35 |
| cdslVcClassVbrNrtInputMBS This object specifies the Input Maximum Burst Size. | column | cells Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.36 |
| cdslVcClassAbrPCR This object specifies Abr Peak Cell Rate. | column | kbps Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.4 |
| cdslVcClassAbrMcr This object specifies Minimum Guaranteed Cell Rate.
It shall be smaller than cdslVcClassAbrPCR. | column | kbps Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.5 |
| cdslVcClassAbrIORIF This object specifies Abr inverse of rate increase factor
(1/rif) to the power of two.
Note that the actual value in the system is the power of
two of this object… | column | Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.6 |
| cdslVcClassAbrIORDF Abr inverse of rate decrease factor (1/rdf) to the power
of two.
Note that the actual value is the power of two of this
object. For example, value 5 of this object… | column | Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.7 |
| cdslVcClassBroadcast This object indicates whether to allow broadcast or not.
When set the value, do not use unknown. | column | Enumeration | .1.3.6.1.4.1.9.10.30.1.5.2.1.8 |
| cdslVcClassEncapsulation This object specifies encapsulation method. | column | Enumeration | .1.3.6.1.4.1.9.10.30.1.5.2.1.9 |