cdslVcClassAbrIORIF
CISCO-DSL-PROVISION-MIB ·
.1.3.6.1.4.1.9.10.30.1.5.2.1.6
Object
column
r/w
Integer32
This object specifies Abr inverse of rate increase factor
(1/rif) to the power of two.
Note that the actual value in the system is the power of
two of this object. That is, for example, a value 5 of
this object means 2**5 = 32 in the system for AbrIORIF.
Range (0..15) to the power of two is the range (1..32768).
Context
- MIB
- CISCO-DSL-PROVISION-MIB
- OID
.1.3.6.1.4.1.9.10.30.1.5.2.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cdslVcClassEntry
- Table
- cdslVcClassTable
- Siblings
- 36
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-15
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cdslVcClassName This object is used to identify the vc class. | column | OctetString | .1.3.6.1.4.1.9.10.30.1.5.2.1.1 |
| cdslVcClassMuxLinkType This object is used to specify the link type if
the encapsulation is aal5mux.
1 for IP and
2 for PPP. | column | Enumeration | .1.3.6.1.4.1.9.10.30.1.5.2.1.10 |
| cdslVcClassVirtualTemplate The virtual template number. Value zero means not configured. | column | Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.11 |
| cdslVcClassIdleTimeout This object specifies idle timeout. | column | Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.12 |
| cdslVcClassIdleMTR This object specifies the minimum traffic rate to keep
the connection. | column | kbps Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.13 |
| cdslVcClassILMIManage This object specifies whether to allow ilmi manage or not.
When set the value, do not use unknown. | column | Enumeration | .1.3.6.1.4.1.9.10.30.1.5.2.1.14 |
| cdslVcClassInarp This object specifies InARP Frequency in minutes. | column | Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.15 |
| cdslVcClassOamRetryUpCount OAM retry count before declaring a VC is up | column | Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.16 |
| cdslVcClassOamRetryDownCount OAM retry count before declaring a VC is down | column | Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.17 |
| cdslVcClassOamPvcManaged This object specifies whether to enable VC management on
OAM in a PVC. When set the value, do not use unknown. | column | Enumeration | .1.3.6.1.4.1.9.10.30.1.5.2.1.18 |
| cdslVcClassOamPvcLF This object specifies the OAM loopback frequency. | column | seconds Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.19 |
| cdslVcClassType This object indicates the type of the vc class.
Atm is for Asynchronous transfer mode and
funi for frame user network interface. | column | Enumeration | .1.3.6.1.4.1.9.10.30.1.5.2.1.2 |
| cdslVcClassOamSvcManaged This object specifies whether to enable VC management on
OAM on SVC SVC. When set the value, do not use unknown. | column | Enumeration | .1.3.6.1.4.1.9.10.30.1.5.2.1.20 |
| cdslVcClassOamSvcLF This object specifies the OAM loopback frequency for SVC | column | seconds Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.21 |
| cdslVcClassProtocolIpBC This object specifies whether to allow the pseudo-broadcast
on the protocol IP inarp connections or not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.30.1.5.2.1.22 |
| cdslVcClassProtocolIpxBC This object specifies whether to allow the pseudo-broadcast
on the protocol IPX inarp connections or not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.30.1.5.2.1.23 |
| cdslVcClassTransmitPriority This object specifies the transmit priority. | column | Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.24 |
| cdslVcClassUbrPCR This object specifies the Ubr Peak Cell Rate. | column | kbps Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.25 |
| cdslVcClassUbrInputPCR This object specifies the Ubr Input Peak Cell Rate. | column | kbps Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.26 |
| cdslVcClassUbrPlusPCR This object specifies the Ubr+ Peak Cell Rate. | column | kbps Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.27 |
| cdslVcClassUbrPlusMCR This object specifies the Ubr+ Minimum Guaranteed Cell Rate.
It shall be smaller than cdslVcClassUbrPlusPCR. | column | kbps Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.28 |
| cdslVcClassUbrPlusInputPCR This object specifies the Ubr+ Input Peak Cell Rate. | column | kbps Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.29 |
| cdslVcClassQosType This object specifies the QOS type of the vc class. | column | Enumeration | .1.3.6.1.4.1.9.10.30.1.5.2.1.3 |
| cdslVcClassUbrPlusInputMCR This object specifies the Ubr+ Input Minimum Cell Rate.
It shall be smaller than cdslVcClassUbrPlusInputPCR. | column | kbps Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.30 |
| cdslVcClassVbrNrtPCR This object specifies the Vbr-Nrt Peak Cell Rate. | column | kbps Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.31 |
| cdslVcClassVbrNrtSCR This object specifies the Vbr-Nrt Sustainable Cell Rate.
It shall be smaller than cdslVcClassVbrNrtPCR. | column | kbps Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.32 |
| cdslVcClassVbrNrtInputBP This object specifies the Vbr-Nrt Input Burst Parameter:
rounded on AIP to the nearest 32, used as is on NPM. | column | Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.33 |
| cdslVcClassVbrNrtInputPCR This object specifies the Vbr-Nrt Input Peak Cell Rate. | column | kbps Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.34 |
| cdslVcClassVbrNrtInputSCR This object specifies the Vbr-Nrt Input Sustainable Cell
Rate. It shall be smaller than cdslVcClassVbrNrtInputPCR. | column | kbps Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.35 |
| cdslVcClassVbrNrtInputMBS This object specifies the Input Maximum Burst Size. | column | cells Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.36 |
| cdslVcClassRowStatus This object is used to create a new row or modify
or delete an existing row in this table.
The return value of this object is always 'active',
… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.10.30.1.5.2.1.37 |
| cdslVcClassAbrPCR This object specifies Abr Peak Cell Rate. | column | kbps Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.4 |
| cdslVcClassAbrMcr This object specifies Minimum Guaranteed Cell Rate.
It shall be smaller than cdslVcClassAbrPCR. | column | kbps Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.5 |
| cdslVcClassAbrIORDF Abr inverse of rate decrease factor (1/rdf) to the power
of two.
Note that the actual value is the power of two of this
object. For example, value 5 of this object… | column | Integer32 | .1.3.6.1.4.1.9.10.30.1.5.2.1.7 |
| cdslVcClassBroadcast This object indicates whether to allow broadcast or not.
When set the value, do not use unknown. | column | Enumeration | .1.3.6.1.4.1.9.10.30.1.5.2.1.8 |
| cdslVcClassEncapsulation This object specifies encapsulation method. | column | Enumeration | .1.3.6.1.4.1.9.10.30.1.5.2.1.9 |