cdslVcClassVbrNrtInputMBS

CISCO-DSL-PROVISION-MIB · .1.3.6.1.4.1.9.10.30.1.5.2.1.36
MIB view Table view

Object

column r/w cells Integer32 
This object specifies the Input Maximum Burst Size.

Context

MIB
CISCO-DSL-PROVISION-MIB
OID
.1.3.6.1.4.1.9.10.30.1.5.2.1.36
Type
column
Access
readwrite
Status
current
Units
cells
Parent
cdslVcClassEntry
Table
cdslVcClassTable
Siblings
36

Syntax

cells Integer32

Values & Constraints

Object Constraints
range: 1-65536

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cdslVcClassName
This object is used to identify the vc class.
columnOctetString.1.3.6.1.4.1.9.10.30.1.5.2.1.1
cdslVcClassMuxLinkType
This object is used to specify the link type if the encapsulation is aal5mux. 1 for IP and 2 for PPP.
columnEnumeration.1.3.6.1.4.1.9.10.30.1.5.2.1.10
cdslVcClassVirtualTemplate
The virtual template number. Value zero means not configured.
columnInteger32.1.3.6.1.4.1.9.10.30.1.5.2.1.11
cdslVcClassIdleTimeout
This object specifies idle timeout.
columnInteger32.1.3.6.1.4.1.9.10.30.1.5.2.1.12
cdslVcClassIdleMTR
This object specifies the minimum traffic rate to keep the connection.
columnkbps Integer32.1.3.6.1.4.1.9.10.30.1.5.2.1.13
cdslVcClassILMIManage
This object specifies whether to allow ilmi manage or not. When set the value, do not use unknown.
columnEnumeration.1.3.6.1.4.1.9.10.30.1.5.2.1.14
cdslVcClassInarp
This object specifies InARP Frequency in minutes.
columnInteger32.1.3.6.1.4.1.9.10.30.1.5.2.1.15
cdslVcClassOamRetryUpCount
OAM retry count before declaring a VC is up
columnInteger32.1.3.6.1.4.1.9.10.30.1.5.2.1.16
cdslVcClassOamRetryDownCount
OAM retry count before declaring a VC is down
columnInteger32.1.3.6.1.4.1.9.10.30.1.5.2.1.17
cdslVcClassOamPvcManaged
This object specifies whether to enable VC management on OAM in a PVC. When set the value, do not use unknown.
columnEnumeration.1.3.6.1.4.1.9.10.30.1.5.2.1.18
cdslVcClassOamPvcLF
This object specifies the OAM loopback frequency.
columnseconds Integer32.1.3.6.1.4.1.9.10.30.1.5.2.1.19
cdslVcClassType
This object indicates the type of the vc class. Atm is for Asynchronous transfer mode and funi for frame user network interface.
columnEnumeration.1.3.6.1.4.1.9.10.30.1.5.2.1.2
cdslVcClassOamSvcManaged
This object specifies whether to enable VC management on OAM on SVC SVC. When set the value, do not use unknown.
columnEnumeration.1.3.6.1.4.1.9.10.30.1.5.2.1.20
cdslVcClassOamSvcLF
This object specifies the OAM loopback frequency for SVC
columnseconds Integer32.1.3.6.1.4.1.9.10.30.1.5.2.1.21
cdslVcClassProtocolIpBC
This object specifies whether to allow the pseudo-broadcast on the protocol IP inarp connections or not.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.10.30.1.5.2.1.22
cdslVcClassProtocolIpxBC
This object specifies whether to allow the pseudo-broadcast on the protocol IPX inarp connections or not.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.10.30.1.5.2.1.23
cdslVcClassTransmitPriority
This object specifies the transmit priority.
columnInteger32.1.3.6.1.4.1.9.10.30.1.5.2.1.24
cdslVcClassUbrPCR
This object specifies the Ubr Peak Cell Rate.
columnkbps Integer32.1.3.6.1.4.1.9.10.30.1.5.2.1.25
cdslVcClassUbrInputPCR
This object specifies the Ubr Input Peak Cell Rate.
columnkbps Integer32.1.3.6.1.4.1.9.10.30.1.5.2.1.26
cdslVcClassUbrPlusPCR
This object specifies the Ubr+ Peak Cell Rate.
columnkbps Integer32.1.3.6.1.4.1.9.10.30.1.5.2.1.27
cdslVcClassUbrPlusMCR
This object specifies the Ubr+ Minimum Guaranteed Cell Rate. It shall be smaller than cdslVcClassUbrPlusPCR.
columnkbps Integer32.1.3.6.1.4.1.9.10.30.1.5.2.1.28
cdslVcClassUbrPlusInputPCR
This object specifies the Ubr+ Input Peak Cell Rate.
columnkbps Integer32.1.3.6.1.4.1.9.10.30.1.5.2.1.29
cdslVcClassQosType
This object specifies the QOS type of the vc class.
columnEnumeration.1.3.6.1.4.1.9.10.30.1.5.2.1.3
cdslVcClassUbrPlusInputMCR
This object specifies the Ubr+ Input Minimum Cell Rate. It shall be smaller than cdslVcClassUbrPlusInputPCR.
columnkbps Integer32.1.3.6.1.4.1.9.10.30.1.5.2.1.30
cdslVcClassVbrNrtPCR
This object specifies the Vbr-Nrt Peak Cell Rate.
columnkbps Integer32.1.3.6.1.4.1.9.10.30.1.5.2.1.31
cdslVcClassVbrNrtSCR
This object specifies the Vbr-Nrt Sustainable Cell Rate. It shall be smaller than cdslVcClassVbrNrtPCR.
columnkbps Integer32.1.3.6.1.4.1.9.10.30.1.5.2.1.32
cdslVcClassVbrNrtInputBP
This object specifies the Vbr-Nrt Input Burst Parameter: rounded on AIP to the nearest 32, used as is on NPM.
columnInteger32.1.3.6.1.4.1.9.10.30.1.5.2.1.33
cdslVcClassVbrNrtInputPCR
This object specifies the Vbr-Nrt Input Peak Cell Rate.
columnkbps Integer32.1.3.6.1.4.1.9.10.30.1.5.2.1.34
cdslVcClassVbrNrtInputSCR
This object specifies the Vbr-Nrt Input Sustainable Cell Rate. It shall be smaller than cdslVcClassVbrNrtInputPCR.
columnkbps Integer32.1.3.6.1.4.1.9.10.30.1.5.2.1.35
cdslVcClassRowStatus
This object is used to create a new row or modify or delete an existing row in this table. The return value of this object is always 'active', …
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.9.10.30.1.5.2.1.37
cdslVcClassAbrPCR
This object specifies Abr Peak Cell Rate.
columnkbps Integer32.1.3.6.1.4.1.9.10.30.1.5.2.1.4
cdslVcClassAbrMcr
This object specifies Minimum Guaranteed Cell Rate. It shall be smaller than cdslVcClassAbrPCR.
columnkbps Integer32.1.3.6.1.4.1.9.10.30.1.5.2.1.5
cdslVcClassAbrIORIF
This object specifies Abr inverse of rate increase factor (1/rif) to the power of two. Note that the actual value in the system is the power of two of this object…
columnInteger32.1.3.6.1.4.1.9.10.30.1.5.2.1.6
cdslVcClassAbrIORDF
Abr inverse of rate decrease factor (1/rdf) to the power of two. Note that the actual value is the power of two of this object. For example, value 5 of this object…
columnInteger32.1.3.6.1.4.1.9.10.30.1.5.2.1.7
cdslVcClassBroadcast
This object indicates whether to allow broadcast or not. When set the value, do not use unknown.
columnEnumeration.1.3.6.1.4.1.9.10.30.1.5.2.1.8
cdslVcClassEncapsulation
This object specifies encapsulation method.
columnEnumeration.1.3.6.1.4.1.9.10.30.1.5.2.1.9