CAMBIUM-NETWORKS-AUTO-ATTACH-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

117

cnAutoAttachPortTable

table

.1.3.6.1.4.1.17713.24.1.1.10 · 1 row entry · 21 columns

Open in standard view

This table contains port-specific data
for the Auto-Attach application.

cnAutoAttachPortEntry entry .1.3.6.1.4.1.17713.24.1.1.10.1

Port-specific data related to the
Auto-Attach application.

Indexes

cnAutoAttachPortIfIndex

Column Syntax OID

cnAutoAttachPortIfIndex

Port (ifIndex) identifier attribute.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.17713.24.1.1.10.1.1

cnAutoAttachPortState

The current port state from an Auto-Attach
perspective. Indicates whether remote device
data associated with the port will be examined
for Auto-Attach processing purposes.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.17713.24.1.1.10.1.2

cnAutoAttachPortMsgAuthStatus

Controls the current Auto-Attach message
authentication status for the associated
interface.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.17713.24.1.1.10.1.3

cnAutoAttachPortMsgAuthKey

Provides access to the Auto-Attach message
authentication key for the associated interface.
Can be used to establish a new key of length
1..32 octets. Always returns a zero-length
string when queried.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.17713.24.1.1.10.1.4

cnAutoAttachPortActivePolicyName

Name of the policy specification that is
currently applied to the port.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.17713.24.1.1.10.1.5

cnAutoAttachPortPolicyApplied

The number of times a policy has been applied
to the port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.17713.24.1.1.10.1.6

cnAutoAttachPortPolicyExpired

The number of times a policy has expired on
the port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.17713.24.1.1.10.1.7

cnAutoAttachPortPolicyErrors

The number of times an error has been detected
during policy application/expiration on the port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.17713.24.1.1.10.1.8

cnAutoAttachPortRowStatus

This object allows entries to be created, deleted
and modified in the cnAutoAttachPortTable, if the
operation is supported by the agent.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.17713.24.1.1.10.1.9

cnAutoAttachPortTlvTxEnable

This object supports enabling/disabling PBA/AA TLV
transmission with LLDP. TLV transmission is enabled
on the port when the associated bit is 1 and disabled
when the bit is 0. Support for specific PBA TLVs is
platform-…

Bitsr/w

Enumerated Values:

0	pbaAuthenticationTlv
1	pbaDeviceSettingsTlv

.1.3.6.1.4.1.17713.24.1.1.10.1.10

cnAutoAttachPortDevSettingsTlvReceived

The number of times a PBA Device Settings TLV
has been received by LLDP on the port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.17713.24.1.1.10.1.11

cnAutoAttachPortDevSettingsTlvProcessed

The number of times a PBA Device Settings TLV
has been processed by the PBA agent on the port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.17713.24.1.1.10.1.12

cnAutoAttachPortDevSettingsTlvAuthFails

The number of times a PBA Device Settings TLV
has been dropped because of an authentication
failure on the port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.17713.24.1.1.10.1.13

cnAutoAttachPortPrevPolicyName

Name of the policy specification that was
previously applied to the port.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.17713.24.1.1.10.1.14

cnAutoAttachPortAuthTlvReceived

The number of times a PBA Authentication TLV
has been received by LLDP on the port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.17713.24.1.1.10.1.15

cnAutoAttachPortAuthTlvProcessed

The number of times a PBA Authentication TLV
has been processed by the PBA agent on the port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.17713.24.1.1.10.1.16

cnAutoAttachPortAuthTlvChanged

The number of times a PBA Authentication TLV
that is different than the previously processed
Authentication TLV has been processed by the PBA
agent on the port.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.17713.24.1.1.10.1.17

cnAutoAttachPortAutoVlanServerDiscovery

Controls Auto-VLAN server discovery
for the associated interface.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.17713.24.1.1.10.1.18

cnAutoAttachPortAutoVlanServerStatus

Exports the current Auto-VLAN server
status for the associated interface.

notDiscovered(1) - no server detected
discovered(2) - server detected
connected(3) - server detected and
Auto-VLA…

Enumeration

Enumerated Values:

1	notDiscovered
2	discovered
3	connected

.1.3.6.1.4.1.17713.24.1.1.10.1.19

cnAutoAttachPortAutoVlanServerTrunkStatus

Exports the current Auto-VLAN server trunk
status for the associated interface. Status
is 'enabled' when the interface mode has
been dynamically transitioned to Trunk mode.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.17713.24.1.1.10.1.20

cnAutoAttachPortRestrictedMacMatch

When enabled, additional checks are performed
during evaluation of MAC address-based policies
to ensure that they are only applied to the
port if only a single MAC address has been
learned or where the MAC that is matc…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.17713.24.1.1.10.1.21

cnAutoAttachRuleTable

table

.1.3.6.1.4.1.17713.24.1.1.11 · 1 row entry · 6 columns

Open in standard view

This table contains the rule specifications 
for the Auto-Attach application.

cnAutoAttachRuleEntry entry .1.3.6.1.4.1.17713.24.1.1.11.1

Information about the rule specifications
for the Auto-Attach application.

Indexes

cnAutoAttachRuleName

Column Syntax OID

cnAutoAttachRuleName

Name for the rule specification.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.17713.24.1.1.11.1.1

cnAutoAttachRuleType

Rule type identifier. The rule type determines
how a device is identified using data associated
with the device (e.g., using exported LLDP TLV
data, device MAC address data, etc.).

Enumerationr/w

Enumerated Values:

1	none
2	lldpAny
3	lldpCapabilities
4	lldpSystemName
5	lldpSystemDescription
6	lldpChassisId
7	lldpPortId
8	lldpPortDescription
9	macOui
10	macFullAddress
11	macAddressRange
12	lldpIpv4MgmtAddress
13	autoVlan
14	defaultAnyMac
15	ifc8021x
16	autoVoip
17	macList

.1.3.6.1.4.1.17713.24.1.1.11.1.2

cnAutoAttachRuleDeviceData

Specifies the data that is used to identify a
device. Data application depends on the associated
detection method (cnAutoAttachRuleType).

OctetStringr/w

Constraints:
range: 0-60

.1.3.6.1.4.1.17713.24.1.1.11.1.3

cnAutoAttachRuleRowStatus

This object allows entries to be created and deleted
in the cnAutoAttachRuleTable.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.17713.24.1.1.11.1.4

cnAutoAttachRuleListName

The Rule List Name is used to link rules.
Rules belonging to the same list (based on
the rule list name attribute) are treated
as a single rule during evaluation when
referenced by a policy.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.17713.24.1.1.11.1.5

cnAutoAttachRuleDataFileName

File name that identifies downloaded data
that can be used to specify rule criteria,
if needed, as determined by the rule type.

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.17713.24.1.1.11.1.6

cnAutoAttachActionTable

table

.1.3.6.1.4.1.17713.24.1.1.12 · 1 row entry · 19 columns

Open in standard view

This table contains the action specifications 
for the Auto-Attach application.

cnAutoAttachActionEntry entry .1.3.6.1.4.1.17713.24.1.1.12.1

Information about the action specifications
for the Auto-Attach application.

Indexes

cnAutoAttachActionName

Column Syntax OID

cnAutoAttachActionName

Name for the action specification.

Action is localized if the name includes
a localization ('@localizationValue')
suffix. The base action name is 1..32
characters while the localization value
is 0..32 cha…

OctetString

Constraints:
range: 1-65

.1.3.6.1.4.1.17713.24.1.1.12.1.1

cnAutoAttachActionVlanData deprecated

Specifies VLAN IDs to be associated with
an interface. VLAN data is specified using a
string containing comma-separated individual
VLANs and VLAN ranges (e.g., '8,10,30-35').
A maximum of 200 VLANs can be specified.
…

OctetStringr/w

Constraints:
range: 0-100

.1.3.6.1.4.1.17713.24.1.1.12.1.2

cnAutoAttachActionPvid

Default/native VLAN ID for an interface.
A value of 0 indicates an PVID update
action is not requested.

Integer32r/w

Constraints:
range: 0-4094

.1.3.6.1.4.1.17713.24.1.1.12.1.3

cnAutoAttachActionPortMode

Port mode for an interface. A value of
'none(1)' indicates that no update is
requested.

Enumerationr/w

Enumerated Values:

1	none
2	access
3	trunk
4	hybrid

.1.3.6.1.4.1.17713.24.1.1.12.1.4

cnAutoAttachActionRowStatus

This object allows entries to be created and deleted
in the cnAutoAttachActionTable.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.17713.24.1.1.12.1.5

cnAutoAttachActionUserPriority

Default user priority value for an interface.
A value of 8 indicates a user priority update
action is not requested.

Integer32r/w

Constraints:
range: 0-8

.1.3.6.1.4.1.17713.24.1.1.12.1.6

cnAutoAttachActionQosTrust

QoS trust setting for an interface. A value
of 'none(1)' indicates that no update is
requested.

Enumerationr/w

Enumerated Values:

1	none
2	untrusted
3	dot1p
4	dscp

.1.3.6.1.4.1.17713.24.1.1.12.1.7

cnAutoAttachActionUplinkData

Specifies interfaces to be considered for
VLAN membership updates when VLAN membership
updates are initiated through processing of
the cnAutoAttachActionVlanData and the
cnAutoAttachActionExtVlanData objects.
…

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.17713.24.1.1.12.1.8

cnAutoAttachActionPoePriority

PoE priority setting for an interface. A
value of 'none(1)' indicates that no update
is requested.

Enumerationr/w

Enumerated Values:

1	none
2	critical
3	high
4	low

.1.3.6.1.4.1.17713.24.1.1.12.1.9

cnAutoAttachActionPvidUpdateReset

PVID update modifier setting. When 'enabled(1)',
if the port PVID is updated when a policy applied,
the port will be bounced (shutdown/no shutdown).
If 'disabled(2)', the port is not bounced.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.17713.24.1.1.12.1.10

cnAutoAttachActionProtectedPort

Protected port setting. When 'enabled(2)', the
port will be made protected in terms of VLAN
operation. If 'disabled(3)', the port will not
operate as a protected port.

Enumerationr/w

Enumerated Values:

1	none
2	enabled
3	disabled

.1.3.6.1.4.1.17713.24.1.1.12.1.11

cnAutoAttachActionCambiumSync

Cambium Sync setting. When 'enabled(2)', the
the Cambium Sync signal will be generated on
the port. If 'disabled(3)', Cambium Sync will
not be generated on the port.

If a device does not support this f…

Enumerationr/w

Enumerated Values:

1	none
2	enabled
3	disabled

.1.3.6.1.4.1.17713.24.1.1.12.1.12

cnAutoAttachActionPortSpeed

Port Speed setting. Supports enabling (the
'negotiated' options) or disabling (the 'forced'
option) port speed auto-negotiation and sets
the negotiated maximum or hardcoded speed.

If a device does not sup…

Enumerationr/w

Enumerated Values:

1	none
2	negotiated10Mbps
3	negotiated100Mbps
4	negotiated1Gbps
5	negotiated2500Mbps
6	forced10Mbps
7	forced100Mbps
8	forced1Gbps
9	forced2500Mbps

.1.3.6.1.4.1.17713.24.1.1.12.1.13

cnAutoAttachActionPortAdr

Port Automatic Device Recovery (ADR) setting.
Supports enabling or disabling the ADR status
for a port.

If a device does not support this functionality,
the value of this attribute is silently ignored.

Enumerationr/w

Enumerated Values:

1	none
2	enabled
3	disabled

.1.3.6.1.4.1.17713.24.1.1.12.1.14

cnAutoAttachActionAutoVoip

Automatic voice device processing (Auto-VoIP).
Supports enabling or disabling automatic voice
device processing. When 'enabled(1)', port settings
are updated to support a connected VoIP device
leveraging the global voi…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.17713.24.1.1.12.1.15

cnAutoAttachActionExtVlanData

OctetStringr/w

Constraints:
range: 0-250

.1.3.6.1.4.1.17713.24.1.1.12.1.16

cnAutoAttachActionStpPortfast

STP portfast setting. When 'enabled(2)', STP
portfast processing will be enabled on the port.
If 'disabled(3)', STP portfast processing will
not be enabled on the port.

Enumerationr/w

Enumerated Values:

1	none
2	enabled
3	disabled

.1.3.6.1.4.1.17713.24.1.1.12.1.17

cnAutoAttachActionExcludeVlans

VLAN update modifier setting. When 'enabled(1)',
current VLAN memberships will be cleared when a
policy is applied. If 'disabled(2)', current VLAN
memberships will not be explicitly cleared.

Setting is i…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.17713.24.1.1.12.1.18

cnAutoAttachActionDhcpSnoopTrust

DHCP Snooping trust state setting. When 'untrusted(2)',
the port's DHCP Snooping trust state will be set to
untrusted. If 'trusted(3)', the port's DHCP Snooping
trust state will be set to trusted.

Enumerationr/w

Enumerated Values:

1	none
2	untrusted
3	trusted

.1.3.6.1.4.1.17713.24.1.1.12.1.19

cnAutoAttachPolicyTable

table

.1.3.6.1.4.1.17713.24.1.1.13 · 1 row entry · 16 columns

Open in standard view

This table contains the policy specifications 
for the Auto-Attach application.

cnAutoAttachPolicyEntry entry .1.3.6.1.4.1.17713.24.1.1.13.1

Information about the policy specifications
for the Auto-Attach application.

Indexes

cnAutoAttachPolicyName

Column Syntax OID

cnAutoAttachPolicyName

Name for the policy specification.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.17713.24.1.1.13.1.1

cnAutoAttachPolicyStatus

Status of the policy specification. A
'enabled(1)' policy can be applied to an
interface based on device detection. A
'disabled(2)' policy will never be applied.
Disabling a policy that is currently applied
to an interf…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.17713.24.1.1.13.1.2

cnAutoAttachPolicyPrecedence

Precedence to use for selecting a policy
when multiple policies match a device. A
policy with a lower precedence value is
applied before a policy with a higher
precedence value.

If a zero precedence va…

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.17713.24.1.1.13.1.3

cnAutoAttachPolicyRuleName

Name of the rule specification that is
referenced by the policy. The rule must
be defined to be referenced.

Rule name and rule type/device data are
mutually-exclusive and can't be configured
in the sa…

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.17713.24.1.1.13.1.4

cnAutoAttachPolicyRuleType

Rule type identifier. The rule type determines
how a device is identified using data associated
with the device (e.g., using exported LLDP TLV
data, device MAC address data, etc.).

Rule name and rule typ…

Enumerationr/w

Enumerated Values:

1	none
2	lldpAny
3	lldpCapabilities
4	lldpSystemName
5	lldpSystemDescription
6	lldpChassisId
7	lldpPortId
8	lldpPortDescription
9	macOui
10	macFullAddress

.1.3.6.1.4.1.17713.24.1.1.13.1.5

cnAutoAttachPolicyRuleDeviceData

Specifies the data that is used to identify a
device. Data application depends on the associated
detection method (cnAutoAttachPolicyRuleType).

Rule name and rule type/device data are
mutually-exclusive…

OctetStringr/w

Constraints:
range: 0-60

.1.3.6.1.4.1.17713.24.1.1.13.1.6

cnAutoAttachPolicyActionName

Name of the action specification that is
referenced by the policy. The action must
be defined to be referenced.

Action name and VLAN data/pvid/port mode are
mutually-exclusive and can't be configured
…

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.17713.24.1.1.13.1.7

cnAutoAttachPolicyActionVlanData

OctetStringr/w

Constraints:
range: 0-100

.1.3.6.1.4.1.17713.24.1.1.13.1.8

cnAutoAttachPolicyActionPvid

Default/native VLAN ID for an interface.
A value of 0 indicates an PVID update action
is not requested.

Action name and VLAN data/pvid/port mode are
mutually-exclusive and can't be configured
in the sa…

Integer32r/w

Constraints:
range: 0-4094

.1.3.6.1.4.1.17713.24.1.1.13.1.9

cnAutoAttachPolicyActionPortMode

Port mode for an interface. A value of
'none(1)' indicates that no update is
requested.

Action name and VLAN data/pvid/port mode are
mutually-exclusive and can't be configured
in the same policy.

Enumerationr/w

Enumerated Values:

1	none
2	access
3	trunk
4	hybrid

.1.3.6.1.4.1.17713.24.1.1.13.1.10

cnAutoAttachPolicyApplied

The number of times this policy specification
has been applied to an interface.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.17713.24.1.1.13.1.11

cnAutoAttachPolicyExpired

The number of times this policy specification
has expired on an interface.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.17713.24.1.1.13.1.12

cnAutoAttachPolicyErrors

The number of times an error has occurred
during application/expiration of this policy
specification on an interface.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.17713.24.1.1.13.1.13

cnAutoAttachPolicyRowStatus

This object allows entries to be created and deleted
in the cnAutoAttachPolicyTable.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.17713.24.1.1.13.1.14

cnAutoAttachPolicyPortList

Specifies interfaces to be considered during
policy match criteria evaluation. If interface
data is specified, only interfaces that are
identified by this attribute are considered
potential policy matches.
…

OctetStringr/w

Constraints:
range: 0-200

.1.3.6.1.4.1.17713.24.1.1.13.1.15

cnAutoAttachPolicyTodName

Name of the Time-of-Day specification that
is referenced by the policy. The ToD spec
must be defined to be referenced.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.17713.24.1.1.13.1.16

cnAutoAttachScriptTable

table

.1.3.6.1.4.1.17713.24.1.1.14 · 1 row entry · 4 columns

Open in standard view

This table contains the script definitions 
for the Auto-Attach application.

cnAutoAttachScriptEntry entry .1.3.6.1.4.1.17713.24.1.1.14.1

Information about the script definitions
for the Auto-Attach application.

Indexes

cnAutoAttachScriptName

Column Syntax OID

cnAutoAttachScriptName

Name for the script definition.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.17713.24.1.1.14.1.1

cnAutoAttachScriptActionVlanData

OctetStringr/w

Constraints:
range: 0-100

.1.3.6.1.4.1.17713.24.1.1.14.1.2

cnAutoAttachScriptActionPvid

Default/native VLAN ID for an interface.
A value of 0 indicates a PVID update action
is not requested.

Integer32r/w

Constraints:
range: 0-4094

.1.3.6.1.4.1.17713.24.1.1.14.1.3

cnAutoAttachScriptRowStatus

This object allows entries to be created and deleted
in the cnAutoAttachScriptTable.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.17713.24.1.1.14.1.4

cnAutoAttachCondensedNbrTable

table

.1.3.6.1.4.1.17713.24.1.1.15 · 1 row entry · 24 columns

Open in standard view

This table contains port-specific condensed 
neighbor data used by the Auto-Attach application.

cnAutoAttachCondensedNbrEntry entry .1.3.6.1.4.1.17713.24.1.1.15.1

Port-specific condensed neighbor data used by
the Auto-Attach application. Data is derived from
LLDP and the MAC address table at the time the
table data is queried.

Indexes

cnAutoAttachCondensedNbrIfIndex

Column	Syntax	OID
cnAutoAttachCondensedNbrIfIndex Interface (ifIndex) identifier attribute.	Integer32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.17713.24.1.1.15.1.1`
cnAutoAttachCondensedNbrName Interface name used to identify the port for configuration and monitoring.	OctetString Constraints: `range: 0-20`	`.1.3.6.1.4.1.17713.24.1.1.15.1.2`
cnAutoAttachCondensedNbrLldpChassisId LLDP Chassis ID data associated with the device connected to the port.	OctetString Constraints: `range: 0-255`	`.1.3.6.1.4.1.17713.24.1.1.15.1.3`
cnAutoAttachCondensedNbrLldpPortId LLDP Port ID data associated with the device connected to the port.	OctetString Constraints: `range: 0-255`	`.1.3.6.1.4.1.17713.24.1.1.15.1.4`
cnAutoAttachCondensedNbrLldpSystemName LLDP System Name data associated with the device connected to the port.	OctetString Constraints: `range: 0-255`	`.1.3.6.1.4.1.17713.24.1.1.15.1.5`
cnAutoAttachCondensedNbrLldpSystemDesc LLDP System Description data associated with the device connected to the port.	OctetString Constraints: `range: 0-255`	`.1.3.6.1.4.1.17713.24.1.1.15.1.6`
cnAutoAttachCondensedNbrLldpMgmtIpv4Addr LLDP Mgmt IPv4 Address data associated with the device connected to the port.	OctetString Constraints: `range: 0-15`	`.1.3.6.1.4.1.17713.24.1.1.15.1.7`
cnAutoAttachCondensedNbrMacAddress The MAC address associated with the device connected to the port. The MAC address is returned in xx:xx:xx:xx:xx:xx format. If a single MAC address is associated with the port, it is returned. …	OctetString Constraints: `range: 0-0` `range: 17-17`	`.1.3.6.1.4.1.17713.24.1.1.15.1.8`
cnAutoAttachCondensedNbrClassification Presents the device's class memberships based on the currently defined neighbor class data (cnAutoAttachNbrClassTable) and the LLDP device System Description data.	OctetString Constraints: `range: 0-255`	`.1.3.6.1.4.1.17713.24.1.1.15.1.9`
cnAutoAttachCondensedNbrIfHCInOctets The total number of octets received on the interface since the neighbor was learned.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.17713.24.1.1.15.1.10`
cnAutoAttachCondensedNbrIfHCInUcastPkts The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer, since the neighbor was learned.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.17713.24.1.1.15.1.11`
cnAutoAttachCondensedNbrIfHCInMulticastPkts The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer, since the neighbor was learned. For a MAC layer protocol, this includes both Gro…	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.17713.24.1.1.15.1.12`
cnAutoAttachCondensedNbrIfHCInBroadcastPkts The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer, since the neighbor was learned.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.17713.24.1.1.15.1.13`
cnAutoAttachCondensedNbrIfHCOutOctets The total number of octets transmitted out of the interface, including framing characters, since the neighbor was learned.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.17713.24.1.1.15.1.14`
cnAutoAttachCondensedNbrIfHCOutUcastPkts The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent, sinc…	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.17713.24.1.1.15.1.15`
cnAutoAttachCondensedNbrIfHCOutMulticastPkts The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent, since the neighbor wa…	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.17713.24.1.1.15.1.16`
cnAutoAttachCondensedNbrIfHCOutBroadcastPkts The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent, since the neighbor wa…	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.17713.24.1.1.15.1.17`
cnAutoAttachCondensedNbrTimeStamp The value of sysUpTime when the current neighbor was added to this table.	SNMPv2-TCTimeStamp Textual Convention: SNMPv2-TCTimeStamp `Unsigned32`	`.1.3.6.1.4.1.17713.24.1.1.15.1.18`
cnAutoAttachCondensedNbrIfInErrors The total number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.17713.24.1.1.15.1.19`
cnAutoAttachCondensedNbrIfOutErrors The total number of outbound packets that could not be transmitted because of errors.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.17713.24.1.1.15.1.20`
cnAutoAttachCondensedNbrIfCRCAlignErrors The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral nu…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.17713.24.1.1.15.1.21`
cnAutoAttachCondensedNbrIfLinkTransitions The number of Link Up and Link Down transition events counted for the port.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.17713.24.1.1.15.1.22`
cnAutoAttachCondensedNbrIfUndersizePkts The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.17713.24.1.1.15.1.23`
cnAutoAttachCondensedNbrIfOversizePkts The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.17713.24.1.1.15.1.24`

cnAutoAttachNbrClassTable

table

.1.3.6.1.4.1.17713.24.1.1.18 · 1 row entry · 5 columns

Open in standard view

This table contains neighbor classification 
data that is used to support filtering of the
Condensed Neighbor Table data.

cnAutoAttachNbrClassEntry entry .1.3.6.1.4.1.17713.24.1.1.18.1

Associates a predefined neighbor class with a
string that can be used to identify devices as
class members based on processed LLDP data.

Indexes

cnAutoAttachNbrClassType cnAutoAttachNbrClassIdentifier

Column Syntax OID

cnAutoAttachNbrClassType

Device class groups.

Enumeration

Enumerated Values:

1	other
2	bridge
3	ap
4	router
5	phone
6	radio
7	camera
8	cambium
9	cambiumCnMatrix
10	cambiumCnPilot
11	cambiumWifiAp
12	cambiumNse

.1.3.6.1.4.1.17713.24.1.1.18.1.1

cnAutoAttachNbrClassIdentifier

Specifies the data used to identify a device
as a member of class cnAutoAttachNbrClassType
based on processed LLDP or MAC address data.

OctetString

Constraints:
range: 1-255

.1.3.6.1.4.1.17713.24.1.1.18.1.2

cnAutoAttachNbrClassIdentifierType

Specifies whether the class identifier data
represents LLDP or MAC address data.

Enumerationr/w

Enumerated Values:

1	lldp
2	macOui
3	macAddress

.1.3.6.1.4.1.17713.24.1.1.18.1.3

cnAutoAttachNbrClassStorageType

Storage type associated with the
cnAutoAttachNbrClassTable entry.

SNMPv2-TCStorageType

Textual Convention: SNMPv2-TCStorageType Enumeration

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

.1.3.6.1.4.1.17713.24.1.1.18.1.4

cnAutoAttachNbrClassRowStatus

This object allows entries to be created
and deleted in the cnAutoAttachNbrClassTable.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.17713.24.1.1.18.1.5

cnAutoAttachMacListFileTable

table

.1.3.6.1.4.1.17713.24.1.1.20 · 1 row entry · 5 columns

Open in standard view

This table contains MAC list file data
for the PBA/Auto-Attach application.

cnAutoAttachMacListFileEntry entry .1.3.6.1.4.1.17713.24.1.1.20.1

MAC list file data related to the
PBA/Auto-Attach application.

Indexes

cnAutoAttachMacListFileName

Column Syntax OID

cnAutoAttachMacListFileName

Name of the MAC list file associated
with this entry.

OctetString

Constraints:
range: 1-128

.1.3.6.1.4.1.17713.24.1.1.20.1.1

cnAutoAttachMacListFileMacCount

Count of MAC addresses in the file.

Integer32

Constraints:
range: 1-1000

.1.3.6.1.4.1.17713.24.1.1.20.1.2

cnAutoAttachMacListFileStatus

MAC list file status indication.

Enumeration

Enumerated Values:

1	other
2	pendingDownload
3	downloading
4	downloaded
5	failedDownload

.1.3.6.1.4.1.17713.24.1.1.20.1.3

cnAutoAttachMacListFileRefresh

MAC list file refresh status. Controls
if a file download is initiated only
when a new entry is created (disabled)
or also when an existing entry is
updated (enabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.17713.24.1.1.20.1.4

cnAutoAttachMacListFileRowStatus

This object allows entries to be created and deleted
in the cnAutoAttachMacListFileTable.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.17713.24.1.1.20.1.5

cnAutoAttachTodTable

table

.1.3.6.1.4.1.17713.24.1.1.30 · 1 row entry · 8 columns

Open in standard view

This table contains the Time-of-Day (ToD)
specifications for the PBA application.
          
A ToD specification, when associated with a
PBA policy, determines if the policy is
effectively enabled or disabled (with regard
to policy evaluation) when processing LLDP
and MAC-based events. Disabled policies 
are skipped during event processing since
they can't be applied to any ports.
          
A ToD entry specifies either week-days or
a start/end date and a start/end time related
to those days/dates. Together, these components
establish a window of time that, when compared
to the current system clock value, determines
if the ToD specification is considered active
or inactive. A policy is 'ToD enabled' if the
ToD specification that it is associated with
is active and 'ToD disabled' if it is inactive.

cnAutoAttachTodEntry entry .1.3.6.1.4.1.17713.24.1.1.30.1

Information about the ToD specifications
for the PBA application.

Indexes

cnAutoAttachTodName

Column Syntax OID

cnAutoAttachTodName

Name for the ToD specification.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.17713.24.1.1.30.1.1

cnAutoAttachTodWeekDays

Specifies the days of the week that a ToD entry
is potentially active. Used when relative (day-
based) timing is required. A zero length string
indicates that absolute (date-based) timing is
required (i.e., TodStartDate…

OctetStringr/w

Constraints:
range: 0-56

.1.3.6.1.4.1.17713.24.1.1.30.1.2

cnAutoAttachTodStartDate

Specifies the starting date that a ToD entry
is potentially active. Used when absolute (date-
based) timing is required. A zero length string
indicates that relative (day-based) timing is
required (i.e., TodWeekDays obj…

OctetStringr/w

Constraints:
range: 0-0
range: 10-10

.1.3.6.1.4.1.17713.24.1.1.30.1.3

cnAutoAttachTodEndDate

Specifies the ending date that a ToD entry
is potentially active. Used when absolute (date-
based) timing is required. A zero length string
indicates that relative (day-based) timing is
required (i.e., TodWeekDays objec…

OctetStringr/w

Constraints:
range: 0-0
range: 10-10

.1.3.6.1.4.1.17713.24.1.1.30.1.4

cnAutoAttachTodStartTime

Specifies the starting time that a ToD entry
is potentially active. Required for relative
and absolute ToD specifications.

Start time data is specified using a 24 hour clock
representation (e.g., hh:mm).…

OctetStringr/w

Constraints:
range: 5-5

.1.3.6.1.4.1.17713.24.1.1.30.1.5

cnAutoAttachTodEndTime

Specifies the ending time that a ToD entry
is potentially active. Required for relative
and absolute ToD specifications.

End time data is specified using a 24 hour clock
representation (e.g., hh:mm). Bot…

OctetStringr/w

Constraints:
range: 5-5

.1.3.6.1.4.1.17713.24.1.1.30.1.6

cnAutoAttachTodGroupName

The group name is used to link ToD entries.
ToD entries belonging to the same group (based
on the ToD group name attribute) are treated
as a single (cumulative) ToD specification
during evaluation when referenced by a p…

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.17713.24.1.1.30.1.7

cnAutoAttachTodRowStatus

This object allows entries to be created and deleted
in the cnAutoAttachTodTable.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.17713.24.1.1.30.1.8

cnAutoAttachCondensedNbrHistTable

table

.1.3.6.1.4.1.17713.24.1.1.31 · 1 row entry · 9 columns

Open in standard view

This table contains port-specific condensed 
neighbor history data tracked by the Auto-Attach
application.

cnAutoAttachCondensedNbrHistEntry entry .1.3.6.1.4.1.17713.24.1.1.31.1

Port-specific condensed neighbor history data
tracked by the Auto-Attach application. Data is
derived from LLDP and the MAC address table at
the time the neighbor was originally detected.

Indexes

cnAutoAttachCondensedNbrHistIfIndex cnAutoAttachCondensedNbrHistTimeStamp

Column	Syntax	OID
cnAutoAttachCondensedNbrHistIfIndex Interface (ifIndex) identifier attribute.	Integer32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.17713.24.1.1.31.1.1`
cnAutoAttachCondensedNbrHistTimeStamp The value of sysUpTime when the previous neighbor was added to the Auto-Attach Condensed Nbr table.	SNMPv2-TCTimeStamp Textual Convention: SNMPv2-TCTimeStamp `Unsigned32`	`.1.3.6.1.4.1.17713.24.1.1.31.1.2`
cnAutoAttachCondensedNbrHistName Interface name used to identify the port for configuration and monitoring.	OctetString Constraints: `range: 0-20`	`.1.3.6.1.4.1.17713.24.1.1.31.1.3`
cnAutoAttachCondensedNbrHistLldpChassisId LLDP Chassis ID data associated with the device connected to the port.	OctetString Constraints: `range: 0-255`	`.1.3.6.1.4.1.17713.24.1.1.31.1.4`
cnAutoAttachCondensedNbrHistLldpSystemName LLDP System Name data associated with the device connected to the port.	OctetString Constraints: `range: 0-255`	`.1.3.6.1.4.1.17713.24.1.1.31.1.5`
cnAutoAttachCondensedNbrHistLldpSystemDesc LLDP System Description data associated with the device connected to the port.	OctetString Constraints: `range: 0-255`	`.1.3.6.1.4.1.17713.24.1.1.31.1.6`
cnAutoAttachCondensedNbrHistLldpMgmtIpv4Addr LLDP Mgmt IPv4 Address data associated with the device connected to the port.	OctetString Constraints: `range: 0-15`	`.1.3.6.1.4.1.17713.24.1.1.31.1.7`
cnAutoAttachCondensedNbrHistMacAddress The MAC address associated with the device connected to the port. The MAC address is returned in xx:xx:xx:xx:xx:xx format. If a single MAC address is associated with the port, it is returned. …	OctetString Constraints: `range: 0-0` `range: 17-17`	`.1.3.6.1.4.1.17713.24.1.1.31.1.8`
cnAutoAttachCondensedNbrHistTimeCleared The value of sysUpTime when the previous neighbor was cleared from the Auto-Attach Condensed Nbr table.	SNMPv2-TCTimeStamp Textual Convention: SNMPv2-TCTimeStamp `Unsigned32`	`.1.3.6.1.4.1.17713.24.1.1.31.1.9`