cnAutoAttachPolicyRuleName

CAMBIUM-NETWORKS-AUTO-ATTACH-MIB · .1.3.6.1.4.1.17713.24.1.1.13.1.4
MIB view Table view

Object

column r/w OctetString 
Name of the rule specification that is 
referenced by the policy. The rule must 
be defined to be referenced.
              
Rule name and rule type/device data are 
mutually-exclusive and can't be configured 
in the same policy.

Context

MIB
CAMBIUM-NETWORKS-AUTO-ATTACH-MIB
OID
.1.3.6.1.4.1.17713.24.1.1.13.1.4
Type
column
Access
readwrite
Status
current
Parent
cnAutoAttachPolicyEntry
Table
cnAutoAttachPolicyTable
Siblings
15

Syntax

OctetString

Values & Constraints

Object Constraints
range: 0-32

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cnAutoAttachPolicyName
Name for the policy specification.
columnOctetString.1.3.6.1.4.1.17713.24.1.1.13.1.1
cnAutoAttachPolicyActionPortMode
Port mode for an interface. A value of 'none(1)' indicates that no update is requested. Action name and VLAN data/pvid/port mode are mutually-exclusive and can't b…
columnEnumeration.1.3.6.1.4.1.17713.24.1.1.13.1.10
cnAutoAttachPolicyApplied
The number of times this policy specification has been applied to an interface.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.17713.24.1.1.13.1.11
cnAutoAttachPolicyExpired
The number of times this policy specification has expired on an interface.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.17713.24.1.1.13.1.12
cnAutoAttachPolicyErrors
The number of times an error has occurred during application/expiration of this policy specification on an interface.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.17713.24.1.1.13.1.13
cnAutoAttachPolicyRowStatus
This object allows entries to be created and deleted in the cnAutoAttachPolicyTable.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.17713.24.1.1.13.1.14
cnAutoAttachPolicyPortList
Specifies interfaces to be considered during policy match criteria evaluation. If interface data is specified, only interfaces that are identified by this attribute are considered…
columnOctetString.1.3.6.1.4.1.17713.24.1.1.13.1.15
cnAutoAttachPolicyTodName
Name of the Time-of-Day specification that is referenced by the policy. The ToD spec must be defined to be referenced.
columnOctetString.1.3.6.1.4.1.17713.24.1.1.13.1.16
cnAutoAttachPolicyStatus
Status of the policy specification. A 'enabled(1)' policy can be applied to an interface based on device detection. A 'disabled(2)' policy will never be applied. Disabling a polic…
columnEnumeration.1.3.6.1.4.1.17713.24.1.1.13.1.2
cnAutoAttachPolicyPrecedence
Precedence to use for selecting a policy when multiple policies match a device. A policy with a lower precedence value is applied before a policy with a higher precedence value.…
columnInteger32.1.3.6.1.4.1.17713.24.1.1.13.1.3
cnAutoAttachPolicyRuleType
Rule type identifier. The rule type determines how a device is identified using data associated with the device (e.g., using exported LLDP TLV data, device MAC address data, etc.…
columnEnumeration.1.3.6.1.4.1.17713.24.1.1.13.1.5
cnAutoAttachPolicyRuleDeviceData
Specifies the data that is used to identify a device. Data application depends on the associated detection method (cnAutoAttachPolicyRuleType). Rule name and rule …
columnOctetString.1.3.6.1.4.1.17713.24.1.1.13.1.6
cnAutoAttachPolicyActionName
Name of the action specification that is referenced by the policy. The action must be defined to be referenced. Action name and VLAN data/pvid/port mode are mutu…
columnOctetString.1.3.6.1.4.1.17713.24.1.1.13.1.7
cnAutoAttachPolicyActionVlanData
Specifies VLAN IDs to be associated with an interface. VLAN data is specified using a string containing comma-separated individual VLANs and VLAN ranges (e.g., '8,10,30-35'). A …
columnOctetString.1.3.6.1.4.1.17713.24.1.1.13.1.8
cnAutoAttachPolicyActionPvid
Default/native VLAN ID for an interface. A value of 0 indicates an PVID update action is not requested. Action name and VLAN data/pvid/port mode are mutually-excl…
columnInteger32.1.3.6.1.4.1.17713.24.1.1.13.1.9