cnAutoAttachPolicyActionVlanData
CAMBIUM-NETWORKS-AUTO-ATTACH-MIB ·
.1.3.6.1.4.1.17713.24.1.1.13.1.8
Object
column
r/w
OctetString
Specifies VLAN IDs to be associated with
an interface. VLAN data is specified using a
string containing comma-separated individual
VLANs and VLAN ranges (e.g., '8,10,30-35').
A maximum of 50 VLANs can be specified.
A zero-length string indicates that no VLAN
data is specified.
Action name and VLAN data/pvid/port mode are
mutually-exclusive and can't be configured
in the same policy.
Context
- MIB
- CAMBIUM-NETWORKS-AUTO-ATTACH-MIB
- OID
.1.3.6.1.4.1.17713.24.1.1.13.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cnAutoAttachPolicyEntry
- Table
- cnAutoAttachPolicyTable
- Siblings
- 15
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-100
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cnAutoAttachPolicyName Name for the policy specification. | column | OctetString | .1.3.6.1.4.1.17713.24.1.1.13.1.1 |
| cnAutoAttachPolicyActionPortMode Port mode for an interface. A value of
'none(1)' indicates that no update is
requested.
Action name and VLAN data/pvid/port mode are
mutually-exclusive and can't b… | column | Enumeration | .1.3.6.1.4.1.17713.24.1.1.13.1.10 |
| cnAutoAttachPolicyApplied The number of times this policy specification
has been applied to an interface. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.17713.24.1.1.13.1.11 |
| cnAutoAttachPolicyExpired The number of times this policy specification
has expired on an interface. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.17713.24.1.1.13.1.12 |
| cnAutoAttachPolicyErrors The number of times an error has occurred
during application/expiration of this policy
specification on an interface. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.17713.24.1.1.13.1.13 |
| cnAutoAttachPolicyRowStatus This object allows entries to be created and deleted
in the cnAutoAttachPolicyTable. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.17713.24.1.1.13.1.14 |
| cnAutoAttachPolicyPortList Specifies interfaces to be considered during
policy match criteria evaluation. If interface
data is specified, only interfaces that are
identified by this attribute are considered… | column | OctetString | .1.3.6.1.4.1.17713.24.1.1.13.1.15 |
| cnAutoAttachPolicyTodName Name of the Time-of-Day specification that
is referenced by the policy. The ToD spec
must be defined to be referenced. | column | OctetString | .1.3.6.1.4.1.17713.24.1.1.13.1.16 |
| cnAutoAttachPolicyStatus Status of the policy specification. A
'enabled(1)' policy can be applied to an
interface based on device detection. A
'disabled(2)' policy will never be applied.
Disabling a polic… | column | Enumeration | .1.3.6.1.4.1.17713.24.1.1.13.1.2 |
| cnAutoAttachPolicyPrecedence Precedence to use for selecting a policy
when multiple policies match a device. A
policy with a lower precedence value is
applied before a policy with a higher
precedence value.… | column | Integer32 | .1.3.6.1.4.1.17713.24.1.1.13.1.3 |
| cnAutoAttachPolicyRuleName Name of the rule specification that is
referenced by the policy. The rule must
be defined to be referenced.
Rule name and rule type/device data are
mutually-excl… | column | OctetString | .1.3.6.1.4.1.17713.24.1.1.13.1.4 |
| cnAutoAttachPolicyRuleType Rule type identifier. The rule type determines
how a device is identified using data associated
with the device (e.g., using exported LLDP TLV
data, device MAC address data, etc.… | column | Enumeration | .1.3.6.1.4.1.17713.24.1.1.13.1.5 |
| cnAutoAttachPolicyRuleDeviceData Specifies the data that is used to identify a
device. Data application depends on the associated
detection method (cnAutoAttachPolicyRuleType).
Rule name and rule … | column | OctetString | .1.3.6.1.4.1.17713.24.1.1.13.1.6 |
| cnAutoAttachPolicyActionName Name of the action specification that is
referenced by the policy. The action must
be defined to be referenced.
Action name and VLAN data/pvid/port mode are
mutu… | column | OctetString | .1.3.6.1.4.1.17713.24.1.1.13.1.7 |
| cnAutoAttachPolicyActionPvid Default/native VLAN ID for an interface.
A value of 0 indicates an PVID update action
is not requested.
Action name and VLAN data/pvid/port mode are
mutually-excl… | column | Integer32 | .1.3.6.1.4.1.17713.24.1.1.13.1.9 |