cnAutoAttachPortRestrictedMacMatch
CAMBIUM-NETWORKS-AUTO-ATTACH-MIB ·
.1.3.6.1.4.1.17713.24.1.1.10.1.21
Object
column
r/w
Enumeration
When enabled, additional checks are performed
during evaluation of MAC address-based policies
to ensure that they are only applied to the
port if only a single MAC address has been
learned or where the MAC that is matched by
the policy represents the directly connected
device.
When disabled, MAC address-based policies are
more freely applied to the port on which there
exists MAC address data matching policy criteria.
The global cnAutoAttachRestrictedMacMatch status
must be 'enabled(1)' for the value of this port-
specific setting to be honored. If the global
status is 'disabled(2)', the value of this
object is ignored.
Context
- MIB
- CAMBIUM-NETWORKS-AUTO-ATTACH-MIB
- OID
.1.3.6.1.4.1.17713.24.1.1.10.1.21- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cnAutoAttachPortEntry
- Table
- cnAutoAttachPortTable
- Siblings
- 20
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cnAutoAttachPortIfIndex Port (ifIndex) identifier attribute. | column | Integer32 | .1.3.6.1.4.1.17713.24.1.1.10.1.1 |
| cnAutoAttachPortTlvTxEnable This object supports enabling/disabling PBA/AA TLV
transmission with LLDP. TLV transmission is enabled
on the port when the associated bit is 1 and disabled
when the bit is 0. Su… | column | Bits | .1.3.6.1.4.1.17713.24.1.1.10.1.10 |
| cnAutoAttachPortDevSettingsTlvReceived The number of times a PBA Device Settings TLV
has been received by LLDP on the port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.17713.24.1.1.10.1.11 |
| cnAutoAttachPortDevSettingsTlvProcessed The number of times a PBA Device Settings TLV
has been processed by the PBA agent on the port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.17713.24.1.1.10.1.12 |
| cnAutoAttachPortDevSettingsTlvAuthFails The number of times a PBA Device Settings TLV
has been dropped because of an authentication
failure on the port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.17713.24.1.1.10.1.13 |
| cnAutoAttachPortPrevPolicyName Name of the policy specification that was
previously applied to the port. | column | OctetString | .1.3.6.1.4.1.17713.24.1.1.10.1.14 |
| cnAutoAttachPortAuthTlvReceived The number of times a PBA Authentication TLV
has been received by LLDP on the port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.17713.24.1.1.10.1.15 |
| cnAutoAttachPortAuthTlvProcessed The number of times a PBA Authentication TLV
has been processed by the PBA agent on the port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.17713.24.1.1.10.1.16 |
| cnAutoAttachPortAuthTlvChanged The number of times a PBA Authentication TLV
that is different than the previously processed
Authentication TLV has been processed by the PBA
agent on the port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.17713.24.1.1.10.1.17 |
| cnAutoAttachPortAutoVlanServerDiscovery Controls Auto-VLAN server discovery
for the associated interface. | column | Enumeration | .1.3.6.1.4.1.17713.24.1.1.10.1.18 |
| cnAutoAttachPortAutoVlanServerStatus Exports the current Auto-VLAN server
status for the associated interface.
notDiscovered(1) - no server detected
discovered(2) - server detected
connected(3) - serv… | column | Enumeration | .1.3.6.1.4.1.17713.24.1.1.10.1.19 |
| cnAutoAttachPortState The current port state from an Auto-Attach
perspective. Indicates whether remote device
data associated with the port will be examined
for Auto-Attach processing purposes. | column | Enumeration | .1.3.6.1.4.1.17713.24.1.1.10.1.2 |
| cnAutoAttachPortAutoVlanServerTrunkStatus Exports the current Auto-VLAN server trunk
status for the associated interface. Status
is 'enabled' when the interface mode has
been dynamically transitioned to Trunk mode. | column | Enumeration | .1.3.6.1.4.1.17713.24.1.1.10.1.20 |
| cnAutoAttachPortMsgAuthStatus Controls the current Auto-Attach message
authentication status for the associated
interface. | column | Enumeration | .1.3.6.1.4.1.17713.24.1.1.10.1.3 |
| cnAutoAttachPortMsgAuthKey Provides access to the Auto-Attach message
authentication key for the associated interface.
Can be used to establish a new key of length
1..32 octets. Always returns a zero-len… | column | OctetString | .1.3.6.1.4.1.17713.24.1.1.10.1.4 |
| cnAutoAttachPortActivePolicyName Name of the policy specification that is
currently applied to the port. | column | OctetString | .1.3.6.1.4.1.17713.24.1.1.10.1.5 |
| cnAutoAttachPortPolicyApplied The number of times a policy has been applied
to the port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.17713.24.1.1.10.1.6 |
| cnAutoAttachPortPolicyExpired The number of times a policy has expired on
the port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.17713.24.1.1.10.1.7 |
| cnAutoAttachPortPolicyErrors The number of times an error has been detected
during policy application/expiration on the port. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.17713.24.1.1.10.1.8 |
| cnAutoAttachPortRowStatus This object allows entries to be created, deleted
and modified in the cnAutoAttachPortTable, if the
operation is supported by the agent. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.17713.24.1.1.10.1.9 |