BROCADE-MCT-CLUSTER-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
34

brcdMctClusterTable

table
.1.3.6.1.4.1.1991.1.1.12.1.1.2 · 1 row entry · 12 columns
Open in standard view 
This table provides Multi Chassis Trunking Cluster information.
brcdMctClusterEntry entry .1.3.6.1.4.1.1991.1.1.12.1.1.2.1
An entry in this table represents the MCT Cluster.
Indexes
brcdMctClusterId
Column Syntax OID
brcdMctClusterId
The id for this MCT Cluster.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.1991.1.1.12.1.1.2.1.1
brcdMctClusterName
The name of this MCT Cluster. This object cannot be modified after
creation.
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.1991.1.1.12.1.1.2.1.2
brcdMctClusterRbridgeId
The remote bridge id of this MCT Cluster. This remote bridge
id is used by the peer to communicate with this cluster node.
Unsigned32r/w
Constraints:
range: 1-35535
 .1.3.6.1.4.1.1991.1.1.12.1.1.2.1.3
brcdMctClusterSessionVlan
The session VLAN of this MCT Cluster. The cluster session
VLAN can be in the range of 1 to 4090, but cannot be default VLAN.
The brcdMctClusterSessionVlan and brcdMctClusterKeepAliveVlan
cannot be same.
FOUNDRY-SN-SWITCH-GROUP-MIBBrcdVlanIdTCr/w
Textual Convention: FOUNDRY-SN-SWITCH-GROUP-MIBBrcdVlanIdTC Integer32
Type Constraints:
range: 1..4090
 .1.3.6.1.4.1.1991.1.1.12.1.1.2.1.4
brcdMctClusterKeepAliveVlan
The keep-alive VLAN of this MCT Cluster. The keep-alive VLAN
can be in the range of 0 to 4090, but cannot be default VLAN.
The brcdMctClusterSessionVlan and brcdMctClusterKeepAliveVlan
cannot be same.

The…
FOUNDRY-SN-SWITCH-GROUP-MIBBrcdVlanIdOrNoneTCr/w
Textual Convention: FOUNDRY-SN-SWITCH-GROUP-MIBBrcdVlanIdOrNoneTC Integer32
Type Constraints:
range: 0..4090
 .1.3.6.1.4.1.1991.1.1.12.1.1.2.1.5
brcdMctClusterClientIsolationMode
The client isolation mode of this MCT Cluster.

When this object is set to loose(1), then whenever the
CCP goes down the client performs the Master/Slave
negotiation. After negotiation, the Slave shuts dow…
Enumerationr/w
Enumerated Values:
1loose
2strict
 .1.3.6.1.4.1.1991.1.1.12.1.1.2.1.6
brcdMctClusterClientShutdown
The client shutdown state of this MCT Cluster.
When set to true, shutdown all the local client interfaces
in the cluster. This would result in failover of traffic
to the cluster peer.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.1991.1.1.12.1.1.2.1.7
brcdMctClusterMemberVlans
The list of the member VLAN ids on which this MCT cluster is
operating. This would be the range of VLANs for which
there would be MAC synchronization.
The VLANs which are not continuous are represented with a space
sepa…
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1991.1.1.12.1.1.2.1.8
brcdMctClusterActiveMemberVlans
The list of the active member VLANs of this MCT Cluster.
The VLANs which are not continuous are represented with a space
separated and continuous VLANs represented with the range.
For example: 2 5 10 to 40 100
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1991.1.1.12.1.1.2.1.9
brcdMctClusterDeploy
The admin status of this MCT Cluster. When this object
is set to deploy, consistency check of the entire cluster
configuration is done.

Once the cluster is deployed, the configuration cannot be
modified e…
BrcdDeployStatusr/w
Textual Convention: BrcdDeployStatus Enumeration
Type Values:
1deploy
2undeploy
 .1.3.6.1.4.1.1991.1.1.12.1.1.2.1.10
brcdMctClusterDeployFailureReason
The last failure reason for cluster deploy operation through SNMP.
The following failure reason codes are supported:
none(1) - The last deploy is successful.
unknown(2) …
Enumeration
Enumerated Values:
1none
2unknown
3rBridgeIdNotConfigured
4sessionVlanNotConfigured
5iclNotConfigured
6peerNotConfigured
7iclIsMrpSecondaryInterface
8iclIsErpRplInterface
9iclIsErpMsInterface
10iclIsErpFsInterface
11iclNotInSessionVlan
12iclNotInMemberVlans
13nonIclInterfacesInSessionVlan
14mgmtVeNotConfiguredInSessionVlan
15mgmtIpNotConfiguredInSessionVlan
16mgmtIpIsUsedInPeerOrClientConfig
17mgmtIpNotInSubnetOfPeerIp
18rBridgeIdIsUsedInPeerOrClientConfig
19clientInterfaceIsNotInMemberVlan
20defaultVlanConfigForSessionOrMemberVlan
 .1.3.6.1.4.1.1991.1.1.12.1.1.2.1.11
brcdMctClusterRowStatus
The row status of this MCT Cluster. All the values of RowStatus
are supported. The notInService(2) indicates that cluster is not
yet activated.

The following objects should be present in the same SNMP set…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.1991.1.1.12.1.1.2.1.12

brcdMctClusterIclTable

table
.1.3.6.1.4.1.1991.1.1.12.1.1.3 · 1 row entry · 3 columns
Open in standard view 
This table provides Multi Chassis Trunking Cluster information.
brcdMctClusterIclEntry entry .1.3.6.1.4.1.1991.1.1.12.1.1.3.1
An entry in this table represents the MCT Cluster ICL.
Indexes
brcdMctClusterId brcdMctClusterIclName
Column Syntax OID
brcdMctClusterIclName
The name of ICL.
OctetString
Constraints:
range: 1-64
 .1.3.6.1.4.1.1991.1.1.12.1.1.3.1.1
brcdMctClusterIclIfIndex
The interface index of the ICL. The ICL interface can be a single
ethernet interface or trunk interface index.
IF-MIBInterfaceIndexr/w
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.1991.1.1.12.1.1.3.1.2
brcdMctClusterIclRowStatus
The row status of this MCT Cluster ICL entry. Only the active(1),
createAndGo(4) and destroy (6) values of RowStatus are supported.

If the cluster is deployed, then brcdMctClusterIclRowStatus cannot be
se…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.1991.1.1.12.1.1.3.1.3

brcdMctClusterPeerTable

table
.1.3.6.1.4.1.1991.1.1.12.1.1.4 · 1 row entry · 12 columns
Open in standard view 
This table provides Multi Chassis Trunking Cluster Peers
information.
The objects in this table cannot be modified after the
cluster is deployed
brcdMctClusterPeerEntry entry .1.3.6.1.4.1.1991.1.1.12.1.1.4.1
An entry in this table represents the MCT Cluster Peer.
Indexes
brcdMctClusterId brcdMctClusterPeerAddrType brcdMctClusterPeerAddr
Column Syntax OID
brcdMctClusterPeerAddrType
The address type of this MCT Cluster Peer. The supported address
types are ipv4(1) and ipv6(2).
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.1991.1.1.12.1.1.4.1.1
brcdMctClusterPeerAddr
The IPv4/IPv6 address of this MCT Cluster Peer.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1991.1.1.12.1.1.4.1.2
brcdMctClusterPeerRbridgeId
The remote bridge Id of this MCT Cluster Peer.
Unsigned32r/w
Constraints:
range: 1-35535
 .1.3.6.1.4.1.1991.1.1.12.1.1.4.1.3
brcdMctClusterPeerIclName
The ICL name of this MCT Cluster Peer. This should be same as
brcdMctClusterIclName object for this MCT Cluster
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.1991.1.1.12.1.1.4.1.4
brcdMctClusterPeerFastFailover
The fast failover status of this MCT Cluster Peer.

When this object is set to enable, as soon as the ICL interface
goes down the CCP goes down. All the remote MACs are flushed.

When set to …
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.1991.1.1.12.1.1.4.1.5
brcdMctClusterPeerKeepAliveTime
The keep-alive time in seconds of this MCT Cluster Peer. The range of
keep-alive time is 0 to 21845. The default is 30 seconds.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1991.1.1.12.1.1.4.1.6
brcdMctClusterPeerHoldTime
The hold time in seconds of this MCT Cluster Peer. The hold time must
be at least 3 times the keep alive time. The range of hold time is 3
to 65535. The default is 90 seconds.
Unsigned32r/w
Constraints:
range: 3-65535
 .1.3.6.1.4.1.1991.1.1.12.1.1.4.1.7
brcdMctClusterPeerActiveVlans
The list of the active member VLANs of this MCT Cluster Peer.
The VLANs which are not continuous are represented with a space
separated and continuous VLANs represented with the range.
For example: 2 5 10 to 40 100
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1991.1.1.12.1.1.4.1.8
brcdMctClusterPeerOperStatus
The operational status of this MCT Cluster Peer. The follwoing
values are supported for operational status
unknown(1) - Unknown state
noState(2) - The peer state machine is not started
init(3) - The peer state …
Enumeration
Enumerated Values:
1unknown
2noState
3init
4ccpUp
5ccpDown
6reachable
 .1.3.6.1.4.1.1991.1.1.12.1.1.4.1.9
brcdMctClusterPeerDownReason
The reason for the brcdMctClusterPeerOperStatus is in ccpDown(3) state.
The following values are supported as down reason:
none(1) - Peer is not in down state
loopbackInterfaceDown(2) - Loopback…
Enumeration
Enumerated Values:
1none
2loopbackInterfaceDown
3iclInterfaceDown
4upgradeInProgress
5routeNotAvailable
6iclVeDown
7rBridgeIdMismatch
8clusterIdMismatch
9keepAliveTimeMismatch
10holdTimeMismatch
11fastFailoverMismatch
12shutdownMesgFromPeer
13tcpKeepAliveTimeout
14tcpConnCloseMesg
15holdTimeoutExpired
16sendStateTimeoutExpired
17recvStateTimeoutExpired
18initMesgSendFail
19keepAliveMesgSendFail
20invalidAppMesgRecv
21badProtocolVersionPktRecv
22badPduLengthPktRecv
23unknownCcpPktRecv
24invalidCcpPktRecv
25internalCcpErrorRecv
26ccpTcpCommFail
 .1.3.6.1.4.1.1991.1.1.12.1.1.4.1.10
brcdMctClusterPeerUpTime
The time since this MCT Cluster Peer is up. If the
brcdMctClusterPeerOperStatus is not in ccpUp(2) state, then zero
will be returned.
SNMPv2-TCTimeInterval
Textual Convention: SNMPv2-TCTimeInterval Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.1991.1.1.12.1.1.4.1.11
brcdMctClusterPeerRowStatus
The row status of this MCT Cluster Peer. Only the active(1),
notInService(2), createAndGo(4) and destroy(6) values of RowStatus
are supported. The notInService(2) indicates that cluster is not
yet activated.
…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.1991.1.1.12.1.1.4.1.12

brcdMctClusterClientTable

table
.1.3.6.1.4.1.1991.1.1.12.1.1.5 · 1 row entry · 7 columns
Open in standard view 
This table provides Multi Chassis Trunking Cluster Clients information.
brcdMctClusterClientEntry entry .1.3.6.1.4.1.1991.1.1.12.1.1.5.1
An entry in this table represents the MCT Cluster Client.
Indexes
brcdMctClusterId brcdMctClusterClientName
Column Syntax OID
brcdMctClusterClientName
The name of this MCT Cluster client.
OctetString
Constraints:
range: 1-64
 .1.3.6.1.4.1.1991.1.1.12.1.1.5.1.1
brcdMctClusterClientRbridgeId
The remote bridge id of this MCT Cluster client. This remote
bridge ID is used by the client to communicate with this
cluster node.
Unsigned32r/w
Constraints:
range: 1-35535
 .1.3.6.1.4.1.1991.1.1.12.1.1.5.1.2
brcdMctClusterClientIfIndex
The interface index which is connected to this MCT Cluster
client. The interface should be an ethernet interface or
trunk interface.
IF-MIBInterfaceIndexr/w
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.1991.1.1.12.1.1.5.1.3
brcdMctClusterClientOperStatus
The operational status of this MCT Cluster client. The following
values are taken by the operational status:
unknown(1) - Unknown state
noState(2) - The peer state machine is not started
init(3) - T…
Enumeration
Enumerated Values:
1unknown
2noState
3init
4localDeploy
5adminUp
6remoteUp
7localUp
8up
9slave
10master
11masterPeerUp
 .1.3.6.1.4.1.1991.1.1.12.1.1.5.1.4
brcdMctClusterClientDeploy
The admin status of this MCT Cluster client. When this object
is set to deploy and if cluster is not deployed, the
configuration will be taken but the client state machine will
not be started.

The objects…
BrcdDeployStatusr/w
Textual Convention: BrcdDeployStatus Enumeration
Type Values:
1deploy
2undeploy
 .1.3.6.1.4.1.1991.1.1.12.1.1.5.1.5
brcdMctClusterClientDeployFailureReason
The failure reason for the last cluster client deploy operation
through SNMP. The following failure reasons are supported:
none(1) - The last deploy is successful.
unknown(2) …
Enumeration
Enumerated Values:
1none
2unknown
3rBridgeIdNotConfigured
4clientInterfaceNotConfigured
5rBridgeIdUsedInClusterOrPeer
6clientInterfacePhysicallyNotUp
7clientInterfaceIsMrpRingInterface
8clientInterfaceIsErpInterface
9iclIsNotInMemberVlan
 .1.3.6.1.4.1.1991.1.1.12.1.1.5.1.6
brcdMctClusterClientRowStatus
The row status of this MCT Cluster client. All the values of RowStatus
are supported. The notInService(2) indicates that cluster client is
not deployed.

The brcdMctClusterClientRbridgeId and brcdMctCluste…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.1991.1.1.12.1.1.5.1.7