brcdMctClusterDeployFailureReason

BROCADE-MCT-CLUSTER-MIB · .1.3.6.1.4.1.1991.1.1.12.1.1.2.1.11
MIB view Table view

Object

column Enumeration 
The last failure reason for cluster deploy operation through SNMP.
The following failure reason codes are supported:
   none(1)                              - The last deploy is successful.
   unknown(2)                           - The last deploy has failed
                                          for unknown reason.
   rBridgeIdNotConfigured(3)            - Remote bridge id is not
                                          configured.
   sessionVlanNotConfigured(4)          - Session VLAN is not
                                          configured.
   iclNotConfigured(5)                  - ICL is not configured.
   peerNotConfigured(6)                 - Peer is not configured.
   iclIsMrpSecondaryInterface(7)        - In NI CES/CER devices, ICL
                                          should not be MRP
                                          secondary interface.
   iclIsErpRplInterface(8)              - In NI CES/CER devices, ICL
                                          should not be ERP RPL
                                          interface.
   iclIsErpMsInterface(9)               - In NI CES/CER devices, ICL
                                          should not be ERP MS
                                          interface.
   iclIsErpFsInterface(10)              - In NI CES/CER devices, ICL
                                          should not be ERP FS
                                          interface.
   iclNotInSessionVlan(11)              - ICL is not in session VLAN.
   iclNotInMemberVlans(12)              - ICL is not in member VLANs.
   nonIclInterfacesInSessionVlan(13)    - Non ICL interfaces are
                                          present under session VLAN.
   mgmtVeNotConfiguredInSessionVlan(14) - Management VE is not
                                          configured in session VLAN.
   mgmtIpNotConfiguredInSessionVlan(15) - Management IP is not
                                          configured in session VLAN.
   mgmtIpIsUsedInPeerOrClientConfig(16) - Management IP is used in peer
                                          or client configuration.
   mgmtIpNotInSubnetOfPeerIp(17)        - Management IP is not in subnet
                                          of peer IP.
   rBridgeIdUsedInPeerOrClientConfig(18) - Remote bridge id is used
                                           in peer or client
                                           configuration.
   clientInterfaceIsNotInMemberVlan(19)  - Client interface is not in
                                           member VLAN.
   defaultVlanConfigAsSessOrMemberVlan(20) - Default VLAN is configured
                                             as session or member VLAN.

Context

MIB
BROCADE-MCT-CLUSTER-MIB
OID
.1.3.6.1.4.1.1991.1.1.12.1.1.2.1.11
Type
column
Access
readonly
Status
current
Parent
brcdMctClusterEntry
Table
brcdMctClusterTable
Siblings
11

Syntax

Enumeration

Values & Constraints

Enumerated Values
1none
2unknown
3rBridgeIdNotConfigured
4sessionVlanNotConfigured
5iclNotConfigured
6peerNotConfigured
7iclIsMrpSecondaryInterface
8iclIsErpRplInterface
9iclIsErpMsInterface
10iclIsErpFsInterface
11iclNotInSessionVlan
12iclNotInMemberVlans
13nonIclInterfacesInSessionVlan
14mgmtVeNotConfiguredInSessionVlan
15mgmtIpNotConfiguredInSessionVlan
16mgmtIpIsUsedInPeerOrClientConfig
17mgmtIpNotInSubnetOfPeerIp
18rBridgeIdIsUsedInPeerOrClientConfig
19clientInterfaceIsNotInMemberVlan
20defaultVlanConfigForSessionOrMemberVlan

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
brcdMctClusterId
The id for this MCT Cluster.
columnUnsigned32.1.3.6.1.4.1.1991.1.1.12.1.1.2.1.1
brcdMctClusterDeploy
The admin status of this MCT Cluster. When this object is set to deploy, consistency check of the entire cluster configuration is done. Once the cluster is deployed…
columnBrcdDeployStatus.1.3.6.1.4.1.1991.1.1.12.1.1.2.1.10
brcdMctClusterRowStatus
The row status of this MCT Cluster. All the values of RowStatus are supported. The notInService(2) indicates that cluster is not yet activated. The following object…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.1991.1.1.12.1.1.2.1.12
brcdMctClusterName
The name of this MCT Cluster. This object cannot be modified after creation.
columnOctetString.1.3.6.1.4.1.1991.1.1.12.1.1.2.1.2
brcdMctClusterRbridgeId
The remote bridge id of this MCT Cluster. This remote bridge id is used by the peer to communicate with this cluster node.
columnUnsigned32.1.3.6.1.4.1.1991.1.1.12.1.1.2.1.3
brcdMctClusterSessionVlan
The session VLAN of this MCT Cluster. The cluster session VLAN can be in the range of 1 to 4090, but cannot be default VLAN. The brcdMctClusterSessionVlan and brcdMctClusterKeepAl…
columnFOUNDRY-SN-SWITCH-GROUP-MIBBrcdVlanIdTC.1.3.6.1.4.1.1991.1.1.12.1.1.2.1.4
brcdMctClusterKeepAliveVlan
The keep-alive VLAN of this MCT Cluster. The keep-alive VLAN can be in the range of 0 to 4090, but cannot be default VLAN. The brcdMctClusterSessionVlan and brcdMctClusterKeepAliv…
columnFOUNDRY-SN-SWITCH-GROUP-MIBBrcdVlanIdOrNoneTC.1.3.6.1.4.1.1991.1.1.12.1.1.2.1.5
brcdMctClusterClientIsolationMode
The client isolation mode of this MCT Cluster. When this object is set to loose(1), then whenever the CCP goes down the client performs the Master/Slave negotiation…
columnEnumeration.1.3.6.1.4.1.1991.1.1.12.1.1.2.1.6
brcdMctClusterClientShutdown
The client shutdown state of this MCT Cluster. When set to true, shutdown all the local client interfaces in the cluster. This would result in failover of traffic to the cluster p…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.1991.1.1.12.1.1.2.1.7
brcdMctClusterMemberVlans
The list of the member VLAN ids on which this MCT cluster is operating. This would be the range of VLANs for which there would be MAC synchronization. The VLANs which are not cont…
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1991.1.1.12.1.1.2.1.8
brcdMctClusterActiveMemberVlans
The list of the active member VLANs of this MCT Cluster. The VLANs which are not continuous are represented with a space separated and continuous VLANs represented with the range.…
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1991.1.1.12.1.1.2.1.9