brcdMctClusterRowStatus
BROCADE-MCT-CLUSTER-MIB ·
.1.3.6.1.4.1.1991.1.1.12.1.1.2.1.12
Object
The row status of this MCT Cluster. All the values of RowStatus
are supported. The notInService(2) indicates that cluster is not
yet activated.
The following objects should be present in the same SNMP set request
to create a row with brcdMctClusterRowStatus set to createAndGo(4)
value:
brcdMctClusterName, brcdMctClusterRbridgeId,
brcdMctClusterSessionVlan, brcdMctClusterMemberVlans,
objects.
The brcdMctClusterName object should be present in the same SNMP set
request to create a row in brcdMctClusterTable with
brcdMctClusterRowStatus set to createAndWait(5) value.
If the cluster is deployed, then brcdMctClusterRowStatus cannot be
set destroy(6)
Context
- MIB
- BROCADE-MCT-CLUSTER-MIB
- OID
.1.3.6.1.4.1.1991.1.1.12.1.1.2.1.12- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- brcdMctClusterEntry
- Table
- brcdMctClusterTable
- Siblings
- 11
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| brcdMctClusterId The id for this MCT Cluster. | column | Unsigned32 | .1.3.6.1.4.1.1991.1.1.12.1.1.2.1.1 |
| brcdMctClusterDeploy The admin status of this MCT Cluster. When this object
is set to deploy, consistency check of the entire cluster
configuration is done.
Once the cluster is deployed… | column | BrcdDeployStatus | .1.3.6.1.4.1.1991.1.1.12.1.1.2.1.10 |
| brcdMctClusterDeployFailureReason The last failure reason for cluster deploy operation through SNMP.
The following failure reason codes are supported:
none(1) - The last deploy is s… | column | Enumeration | .1.3.6.1.4.1.1991.1.1.12.1.1.2.1.11 |
| brcdMctClusterName The name of this MCT Cluster. This object cannot be modified after
creation. | column | OctetString | .1.3.6.1.4.1.1991.1.1.12.1.1.2.1.2 |
| brcdMctClusterRbridgeId The remote bridge id of this MCT Cluster. This remote bridge
id is used by the peer to communicate with this cluster node. | column | Unsigned32 | .1.3.6.1.4.1.1991.1.1.12.1.1.2.1.3 |
| brcdMctClusterSessionVlan The session VLAN of this MCT Cluster. The cluster session
VLAN can be in the range of 1 to 4090, but cannot be default VLAN.
The brcdMctClusterSessionVlan and brcdMctClusterKeepAl… | column | FOUNDRY-SN-SWITCH-GROUP-MIBBrcdVlanIdTC | .1.3.6.1.4.1.1991.1.1.12.1.1.2.1.4 |
| brcdMctClusterKeepAliveVlan The keep-alive VLAN of this MCT Cluster. The keep-alive VLAN
can be in the range of 0 to 4090, but cannot be default VLAN.
The brcdMctClusterSessionVlan and brcdMctClusterKeepAliv… | column | FOUNDRY-SN-SWITCH-GROUP-MIBBrcdVlanIdOrNoneTC | .1.3.6.1.4.1.1991.1.1.12.1.1.2.1.5 |
| brcdMctClusterClientIsolationMode The client isolation mode of this MCT Cluster.
When this object is set to loose(1), then whenever the
CCP goes down the client performs the Master/Slave
negotiation… | column | Enumeration | .1.3.6.1.4.1.1991.1.1.12.1.1.2.1.6 |
| brcdMctClusterClientShutdown The client shutdown state of this MCT Cluster.
When set to true, shutdown all the local client interfaces
in the cluster. This would result in failover of traffic
to the cluster p… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.1991.1.1.12.1.1.2.1.7 |
| brcdMctClusterMemberVlans The list of the member VLAN ids on which this MCT cluster is
operating. This would be the range of VLANs for which
there would be MAC synchronization.
The VLANs which are not cont… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1991.1.1.12.1.1.2.1.8 |
| brcdMctClusterActiveMemberVlans The list of the active member VLANs of this MCT Cluster.
The VLANs which are not continuous are represented with a space
separated and continuous VLANs represented with the range.… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1991.1.1.12.1.1.2.1.9 |