ATM-SOFT-PVC-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
33

atmSoftPVccTable

table
.1.3.6.1.4.1.353.5.5.1.1.2 · 1 row entry · 15 columns
Open in standard view 
The (conceptual) table used to manage Soft
Permanent Virtual Channel Connections (Soft PVCCs).
The Soft PVCC table is applicable only to switches.
atmSoftPVccEntry entry .1.3.6.1.4.1.353.5.5.1.1.2.1
Each entry in this table represents a Soft
Permanent Virtual Channel Connection (Soft PVCC)
originating at a switch interface.

A Soft PVCC is a VCC that is:
- provisioned at the originating (source)
int…
Indexes
IF-MIBifIndex ATM-MIBatmVclVpi ATM-MIBatmVclVci atmSoftPVccLeafReference
Column Syntax OID
atmSoftPVccLeafReference
An arbitrary integer which, in the case of the
source VCL having an atmVclCastType of
'p2mpRoot', serves to distinguish between the
multiple leaves attached to a root of a
point-to-multipoint Soft PVCC. If the atmVclC…
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.353.5.5.1.1.2.1.1
atmSoftPVccTargetAddress
The target ATM Address of this Soft PVCC. If no
address is supplied, no attempts to establish the
Soft PVCC are initiated.
AtmAddrr/w
Textual Convention: AtmAddr OctetString
Type Constraints:
range: 0
range: 8
range: 20
 .1.3.6.1.4.1.353.5.5.1.1.2.1.2
atmSoftPVccTargetSelectType
Indicates whether the target VPI/VCI values
are to be used at the destination.

If the value 'any' is specified, the destination
switch will choose the VPI/VCI values. In such a
case, once the Soft PVCC at…
Enumerationr/w
Enumerated Values:
1required
2any
 .1.3.6.1.4.1.353.5.5.1.1.2.1.3
atmSoftPVccTargetVpi
The VPI value of the VCL used at the target interface.
This value is not relevant when the value of
atmSoftPVccTargetSelectType is 'any'.
Integer32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.353.5.5.1.1.2.1.4
atmSoftPVccTargetVci
The VCI value of the VCL used at the target interface.
This value must be filled in when the
atmSoftPVccTargetSelectType is set to 'required'.This
value is not relevant when the value of
atmSoftPVccTargetSelectType is…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.353.5.5.1.1.2.1.5
atmSoftPVccLastReleaseCause
Value of the Cause field of the Cause
Information Element in the last RELEASE
signalling message received for this Soft PVCC.
Indicates the reason for the Release.
Integer32
Constraints:
range: 1-127
 .1.3.6.1.4.1.353.5.5.1.1.2.1.6
atmSoftPVccLastReleaseDiagnostic
Value of the first 8 bytes of diagnostic information
from the Cause field of the Cause Information Element
in the last RELEASE signalling message received for
this Soft PVCC.
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.353.5.5.1.1.2.1.7
atmSoftPVccOperStatus
Describes the status of the Soft PVCC. Valid values
are:
other - none of the types specified below
establishmentInProgress - connection or party is not
operational, but s…
Enumeration
Enumerated Values:
1other
2establishmentInProgress
3connected
4retriesExhausted
5noAddressSupplied
6lowerLayerDown
 .1.3.6.1.4.1.353.5.5.1.1.2.1.8
atmSoftPVccRestart
When the value is set to 'restart' the Soft PVCC
is released if necessary and a new setup procedure
is begun. As a result of this action, the
atmSoftPVccOperStatus object transitions to
'establishmentInProgress' (if not…
Enumerationr/w
Enumerated Values:
1restart
2noop
 .1.3.6.1.4.1.353.5.5.1.1.2.1.9
atmSoftPVccRetryInterval
Defines the period to wait before attempting
to establish the Soft PVCC after the first failed call
attempt. The time to wait between subsequent call
attempts may differ to implement a backoff scheme.
Zero represents a…
secondsInteger32r/w
Constraints:
range: 0-3600
 .1.3.6.1.4.1.353.5.5.1.1.2.1.10
atmSoftPVccRetryTimer
Indicates the current value of the retry timer for
this connection. When the value reaches zero an attempt
will be made to establish the Soft PVCC. When the timer
is not running, the value zero shall be returned.
secondsInteger32
Constraints:
range: 0-86400
 .1.3.6.1.4.1.353.5.5.1.1.2.1.11
atmSoftPVccRetryThreshold
Indicates the number of consecutive call setup attempts for
the same Soft PVCC which need to fail before the
atmSoftPvcCallFailures object is incremented. A value of
zero indicates that an infinite number of call attemp…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.353.5.5.1.1.2.1.12
atmSoftPVccRetryFailures
Indicates how many attempts to establish the connection
have failed. This count is reset whenever a connection
is successfully established or the Soft PVCC is restarted.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.5.1.1.2.1.13
atmSoftPVccRetryLimit
Sets a maximum limit on how many consecutive unsuccessful
call setup attempts can be made before stopping the attempt
to set up the connection. If this limit is reached then
management action will be required (e.g. sett…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.353.5.5.1.1.2.1.14
atmSoftPVccRowStatus
Used to create and delete a Soft PVCC. When this
object is set to 'active' an attempt is made to
set up the Soft PVCC. When this object has the value
'active' and is set to another value, any
set-up or connection in-pro…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.353.5.5.1.1.2.1.15

atmSoftPVpcTable

table
.1.3.6.1.4.1.353.5.5.1.1.3 · 1 row entry · 14 columns
Open in standard view 
The (conceptual) table used to manage Soft
Permanent Virtual Path Connections (Soft PVPCs)
The Soft PVPC table is applicable only to switches.
atmSoftPVpcEntry entry .1.3.6.1.4.1.353.5.5.1.1.3.1
Each entry in this table represents a Soft
Permanent Virtual Path Connection (Soft PVPC)
originating at a switch interface.

A Soft PVPC is a VPC that is:
- provisioned at the originating (source)
interf…
Indexes
IF-MIBifIndex ATM-MIBatmVplVpi atmSoftPVpcLeafReference
Column Syntax OID
atmSoftPVpcLeafReference
An arbitrary integer which, in the case of the
source VPL having a atmVplCastType of
'p2mpRoot', serves to distinguish between the
multiple leaves attached to a root of a
point-to-multipoint Soft PVPC.

If…
Integer32
Constraints:
range: 1-63535
 .1.3.6.1.4.1.353.5.5.1.1.3.1.1
atmSoftPVpcTargetAddress
The target ATM Address of this Soft PVPC. If no
address is supplied, no attempts to establish the
Soft PVPC are initiated.
AtmAddrr/w
Textual Convention: AtmAddr OctetString
Type Constraints:
range: 0
range: 8
range: 20
 .1.3.6.1.4.1.353.5.5.1.1.3.1.2
atmSoftPVpcTargetSelectType
Indicates whether the target VPI value
is to be used at the destination.
If the value 'any' is specified, the
destination switch will choose the VPI
value. In such a case, once the Soft PVPC
atmSoftPVpcOperStatus value …
Enumerationr/w
Enumerated Values:
1required
2any
 .1.3.6.1.4.1.353.5.5.1.1.3.1.3
atmSoftPVpcTargetVpi
The VPI value of the VPL used at the
target interface.

This value must be filled in when the
atmSoftPVpcTargetSelectType is set to 'required'.
This value is not relevant when the value of
atmSoftPVpcTarge…
Integer32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.353.5.5.1.1.3.1.4
atmSoftPVpcLastReleaseCause
Value of the Cause field of the Cause
Information Element in the last RELEASE
signalling message received for this Soft PVPC.
Indicates the reason for the Release.
Integer32
Constraints:
range: 1-127
 .1.3.6.1.4.1.353.5.5.1.1.3.1.5
atmSoftPVpcLastReleaseDiagnostic
Value of the first 8 bytes of diagnostic information
from the Cause field of the Cause Information Element
in the last RELEASE signalling message received for
this Soft PVPC.
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.353.5.5.1.1.3.1.6
atmSoftPVpcOperStatus
Describes the status of the Soft PVPC.
other - none of the types specified below
establishmentInProgress - connection or party is not
operational, but setup or add
…
Enumeration
Enumerated Values:
1other
2establishmentInProgress
3connected
4retriesExhausted
5noAddressSupplied
6lowerLayerDown
 .1.3.6.1.4.1.353.5.5.1.1.3.1.7
atmSoftPVpcRestart
When the value is set to 'restart', the Soft PVPC is
released if necessary and a new setup procedure is begun.
As a result of this action, the atmSoftPVpcOperStatus
object transitions to 'establishmentInProgress' (if no…
Enumerationr/w
Enumerated Values:
1restart
2noop
 .1.3.6.1.4.1.353.5.5.1.1.3.1.8
atmSoftPVpcRetryInterval
Defines the period to wait before attempting
to establish the Soft PVPC after the first failed
call attempt. The time to wait between subsequent
call attempts may differ to implement a backoff scheme.
Zero represents …
secondsInteger32r/w
Constraints:
range: 0-3600
 .1.3.6.1.4.1.353.5.5.1.1.3.1.9
atmSoftPVpcRetryTimer
Indicates the current value of the retry timer for
this connection. When the value reaches zero an attempt
will be made to establish the Soft PVPC. When the
timer is not running, the value zero shall be returned.
secondsInteger32
Constraints:
range: 0-86400
 .1.3.6.1.4.1.353.5.5.1.1.3.1.10
atmSoftPVpcRetryThreshold
Indicates the number of consecutive call setup attempts for
the same Soft PVPC which need to fail before the
atmSoftPvcCallFailures object is incremented. A value of
zero indicates that an infinite number of call attemp…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.353.5.5.1.1.3.1.11
atmSoftPVpcRetryFailures
Indicates how many attempts to establish the connection
have failed. This count is reset whenever a connection
is successfully established or the Soft PVPC is restarted.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.5.1.1.3.1.12
atmSoftPVpcRetryLimit
Sets a maximum limit on how many consecutive unsuccessful
call setup attempts can be made before stopping the attempt
to set up the connection. If this limit is reached then
management action will be required (e.g. sett…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.353.5.5.1.1.3.1.13
atmSoftPVpcRowStatus
Used to create and delete a Soft PVPC. When this
object is set to 'active' an attempt is made to
set up the Soft PVPC. When this object has the value
'active' and is set to another value, any
set-up or connection in-pro…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.353.5.5.1.1.3.1.14

atmInterfaceSoftPvcAddressTable

table
.1.3.6.1.4.1.353.5.5.1.1.4 · 1 row entry · 2 columns
Open in standard view 
This table is used to configure ATM addresses at 
an ATM interface on this node prior to setting up
Soft PVPCs or Soft PVPCs at that interface.
atmInterfaceSoftPvcAddressEntry entry .1.3.6.1.4.1.353.5.5.1.1.4.1
ATM address entry for configuring Soft PVCCs or
Soft PVPCs at an ATM interface.
Indexes
IF-MIBifIndex atmInterfaceSoftPvcAddress
Column Syntax OID
atmInterfaceSoftPvcAddress
Specifies the address that can be used to establish a Soft
PVCC or Soft PVPC to this interface.
AtmAddr
Textual Convention: AtmAddr OctetString
Type Constraints:
range: 0
range: 8
range: 20
 .1.3.6.1.4.1.353.5.5.1.1.4.1.1
atmInterfaceSoftPvcAddressRowStatus
Used to create and delete an ATM address at this interface
for setting up Soft PVCCs or Soft PVPCs.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.353.5.5.1.1.4.1.2

atmCurrentlyFailingSoftPVccTable

table
.1.3.6.1.4.1.353.5.5.1.1.5 · 1 row entry · 1 columns
Open in standard view 
A table indicating all Soft Permanent Virtual Channel
Connections (Soft PVCCs) for which the atmSoftPVccRowStatus
is 'active' and the atmSoftPVccOperStatus is other than
'connected'.
atmCurrentlyFailingSoftPVccEntry entry .1.3.6.1.4.1.353.5.5.1.1.5.1
Each entry in this table represents a Soft Permanent
Virtual Channel Connection (Soft PVCC) for which the
atmSoftPVccRowStatus is 'active' and the
atmSoftPVccOperStatus is other than 'connected'.
Indexes
IF-MIBifIndex ATM-MIBatmVclVpi ATM-MIBatmVclVci atmSoftPVccLeafReference
Column Syntax OID
atmCurrentlyFailingSoftPVccTimeStamp
The time at which this Soft PVCC began to fail.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.353.5.5.1.1.5.1.1

atmCurrentlyFailingSoftPVpcTable

table
.1.3.6.1.4.1.353.5.5.1.1.6 · 1 row entry · 1 columns
Open in standard view 
A table indicating all Soft Permanent Virtual Path
Connections (Soft PVPCs) for which the atmSoftPVpcRowStatus
is 'active' and the atmSoftPVpcOperStatus is other than
'connected'.
atmCurrentlyFailingSoftPVpcEntry entry .1.3.6.1.4.1.353.5.5.1.1.6.1
Each entry in this table represents a Soft Permanent
Virtual Path Connection (Soft PVPC) for which the
atmSoftPVpcRowStatus is 'active' and the
atmSoftPVpcOperStatus is other than 'connected'.
Indexes
IF-MIBifIndex ATM-MIBatmVclVpi atmSoftPVpcLeafReference
Column Syntax OID
atmCurrentlyFailingSoftPVpcTimeStamp
The time at which this Soft PVPC began to fail.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.353.5.5.1.1.6.1.1