atmSoftPVpcRetryLimit

ATM-SOFT-PVC-MIB · .1.3.6.1.4.1.353.5.5.1.1.3.1.13

MIB view Table view

Object

column r/w Integer32

Sets a maximum limit on how many consecutive unsuccessful
call setup attempts can be made before stopping the attempt
to set up the connection. If this limit is reached then
management action will be required (e.g. setting
atmSoftPVpcRestart to 'restart') to initiate a new attempt
to establish the connection. A value of zero indicates no
limit - the attempts will continue until successful.

Context

MIB: ATM-SOFT-PVC-MIB
OID: .1.3.6.1.4.1.353.5.5.1.1.3.1.13
Type: column
Access: readwrite
Status: current
Parent: atmSoftPVpcEntry
Table: atmSoftPVpcTable
Siblings: 13

Syntax

Integer32

Values & Constraints

Object Constraints

range: 0-65535

Related Objects

Sibling Objects

Object	Type	Syntax	OID
atmSoftPVpcLeafReference An arbitrary integer which, in the case of the source VPL having a atmVplCastType of 'p2mpRoot', serves to distinguish between the multiple leaves attached to a root of a point-to…	column	Integer32	`.1.3.6.1.4.1.353.5.5.1.1.3.1.1`
atmSoftPVpcRetryTimer Indicates the current value of the retry timer for this connection. When the value reaches zero an attempt will be made to establish the Soft PVPC. When the timer is not running, …	column	seconds Integer32	`.1.3.6.1.4.1.353.5.5.1.1.3.1.10`
atmSoftPVpcRetryThreshold Indicates the number of consecutive call setup attempts for the same Soft PVPC which need to fail before the atmSoftPvcCallFailures object is incremented. A value of zero indicate…	column	Integer32	`.1.3.6.1.4.1.353.5.5.1.1.3.1.11`
atmSoftPVpcRetryFailures Indicates how many attempts to establish the connection have failed. This count is reset whenever a connection is successfully established or the Soft PVPC is restarted.	column	SNMPv2-SMIGauge32	`.1.3.6.1.4.1.353.5.5.1.1.3.1.12`
atmSoftPVpcRowStatus Used to create and delete a Soft PVPC. When this object is set to 'active' an attempt is made to set up the Soft PVPC. When this object has the value 'active' and is set to anothe…	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.353.5.5.1.1.3.1.14`
atmSoftPVpcTargetAddress The target ATM Address of this Soft PVPC. If no address is supplied, no attempts to establish the Soft PVPC are initiated.	column	AtmAddr	`.1.3.6.1.4.1.353.5.5.1.1.3.1.2`
atmSoftPVpcTargetSelectType Indicates whether the target VPI value is to be used at the destination. If the value 'any' is specified, the destination switch will choose the VPI value. In such a case, once th…	column	Enumeration	`.1.3.6.1.4.1.353.5.5.1.1.3.1.3`
atmSoftPVpcTargetVpi The VPI value of the VPL used at the target interface. This value must be filled in when the atmSoftPVpcTargetSelectType is set to 'required'. This value is not rel…	column	Integer32	`.1.3.6.1.4.1.353.5.5.1.1.3.1.4`
atmSoftPVpcLastReleaseCause Value of the Cause field of the Cause Information Element in the last RELEASE signalling message received for this Soft PVPC. Indicates the reason for the Release.	column	Integer32	`.1.3.6.1.4.1.353.5.5.1.1.3.1.5`
atmSoftPVpcLastReleaseDiagnostic Value of the first 8 bytes of diagnostic information from the Cause field of the Cause Information Element in the last RELEASE signalling message received for this Soft PVPC.	column	OctetString	`.1.3.6.1.4.1.353.5.5.1.1.3.1.6`
atmSoftPVpcOperStatus Describes the status of the Soft PVPC. other - none of the types specified below establishmentInProgress - connection or party is not opera…	column	Enumeration	`.1.3.6.1.4.1.353.5.5.1.1.3.1.7`
atmSoftPVpcRestart When the value is set to 'restart', the Soft PVPC is released if necessary and a new setup procedure is begun. As a result of this action, the atmSoftPVpcOperStatus object transit…	column	Enumeration	`.1.3.6.1.4.1.353.5.5.1.1.3.1.8`
atmSoftPVpcRetryInterval Defines the period to wait before attempting to establish the Soft PVPC after the first failed call attempt. The time to wait between subsequent call attempts may differ to impl…	column	seconds Integer32	`.1.3.6.1.4.1.353.5.5.1.1.3.1.9`