atmSoftPVccRowStatus
ATM-SOFT-PVC-MIB ·
.1.3.6.1.4.1.353.5.5.1.1.2.1.15
Object
Used to create and delete a Soft PVCC. When this object is set to 'active' an attempt is made to set up the Soft PVCC. When this object has the value 'active' and is set to another value, any set-up or connection in-progress is released.
Context
- MIB
- ATM-SOFT-PVC-MIB
- OID
.1.3.6.1.4.1.353.5.5.1.1.2.1.15- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- atmSoftPVccEntry
- Table
- atmSoftPVccTable
- Siblings
- 14
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| atmSoftPVccLeafReference An arbitrary integer which, in the case of the
source VCL having an atmVclCastType of
'p2mpRoot', serves to distinguish between the
multiple leaves attached to a root of a
point… | column | Integer32 | .1.3.6.1.4.1.353.5.5.1.1.2.1.1 |
| atmSoftPVccRetryInterval Defines the period to wait before attempting
to establish the Soft PVCC after the first failed call
attempt. The time to wait between subsequent call
attempts may differ to imple… | column | seconds Integer32 | .1.3.6.1.4.1.353.5.5.1.1.2.1.10 |
| atmSoftPVccRetryTimer Indicates the current value of the retry timer for
this connection. When the value reaches zero an attempt
will be made to establish the Soft PVCC. When the timer
is not running, … | column | seconds Integer32 | .1.3.6.1.4.1.353.5.5.1.1.2.1.11 |
| atmSoftPVccRetryThreshold Indicates the number of consecutive call setup attempts for
the same Soft PVCC which need to fail before the
atmSoftPvcCallFailures object is incremented. A value of
zero indicate… | column | Integer32 | .1.3.6.1.4.1.353.5.5.1.1.2.1.12 |
| atmSoftPVccRetryFailures Indicates how many attempts to establish the connection
have failed. This count is reset whenever a connection
is successfully established or the Soft PVCC is restarted. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.353.5.5.1.1.2.1.13 |
| atmSoftPVccRetryLimit Sets a maximum limit on how many consecutive unsuccessful
call setup attempts can be made before stopping the attempt
to set up the connection. If this limit is reached then
manag… | column | Integer32 | .1.3.6.1.4.1.353.5.5.1.1.2.1.14 |
| atmSoftPVccTargetAddress The target ATM Address of this Soft PVCC. If no
address is supplied, no attempts to establish the
Soft PVCC are initiated. | column | AtmAddr | .1.3.6.1.4.1.353.5.5.1.1.2.1.2 |
| atmSoftPVccTargetSelectType Indicates whether the target VPI/VCI values
are to be used at the destination.
If the value 'any' is specified, the destination
switch will choose the VPI/VCI value… | column | Enumeration | .1.3.6.1.4.1.353.5.5.1.1.2.1.3 |
| atmSoftPVccTargetVpi The VPI value of the VCL used at the target interface.
This value is not relevant when the value of
atmSoftPVccTargetSelectType is 'any'. | column | Integer32 | .1.3.6.1.4.1.353.5.5.1.1.2.1.4 |
| atmSoftPVccTargetVci The VCI value of the VCL used at the target interface.
This value must be filled in when the
atmSoftPVccTargetSelectType is set to 'required'.This
value is not relevant when the … | column | Integer32 | .1.3.6.1.4.1.353.5.5.1.1.2.1.5 |
| atmSoftPVccLastReleaseCause Value of the Cause field of the Cause
Information Element in the last RELEASE
signalling message received for this Soft PVCC.
Indicates the reason for the Release. | column | Integer32 | .1.3.6.1.4.1.353.5.5.1.1.2.1.6 |
| atmSoftPVccLastReleaseDiagnostic Value of the first 8 bytes of diagnostic information
from the Cause field of the Cause Information Element
in the last RELEASE signalling message received for
this Soft PVCC. | column | OctetString | .1.3.6.1.4.1.353.5.5.1.1.2.1.7 |
| atmSoftPVccOperStatus Describes the status of the Soft PVCC. Valid values
are:
other - none of the types specified below
establishmentInProgress - connection or party is not
… | column | Enumeration | .1.3.6.1.4.1.353.5.5.1.1.2.1.8 |
| atmSoftPVccRestart When the value is set to 'restart' the Soft PVCC
is released if necessary and a new setup procedure
is begun. As a result of this action, the
atmSoftPVccOperStatus object transiti… | column | Enumeration | .1.3.6.1.4.1.353.5.5.1.1.2.1.9 |