atmSoftPVccLeafReference

ATM-SOFT-PVC-MIB · .1.3.6.1.4.1.353.5.5.1.1.2.1.1

MIB view Table view

Object

column Integer32

An arbitrary integer which, in the case of the
source VCL having an atmVclCastType of
'p2mpRoot', serves to distinguish between the 
multiple leaves attached to a root of a 
point-to-multipoint Soft PVCC. If the atmVclCastType 
is not 'p2mpRoot' the value 1 shall be used.

Context

MIB: ATM-SOFT-PVC-MIB
OID: .1.3.6.1.4.1.353.5.5.1.1.2.1.1
Type: column
Access: noaccess
Status: current
Parent: atmSoftPVccEntry
Table: atmSoftPVccTable
Siblings: 14

Syntax

Integer32

Values & Constraints

Object Constraints

range: 1-65535

Related Objects

Sibling Objects

Object	Type	Syntax	OID
atmSoftPVccRetryInterval Defines the period to wait before attempting to establish the Soft PVCC after the first failed call attempt. The time to wait between subsequent call attempts may differ to imple…	column	seconds Integer32	`.1.3.6.1.4.1.353.5.5.1.1.2.1.10`
atmSoftPVccRetryTimer Indicates the current value of the retry timer for this connection. When the value reaches zero an attempt will be made to establish the Soft PVCC. When the timer is not running, …	column	seconds Integer32	`.1.3.6.1.4.1.353.5.5.1.1.2.1.11`
atmSoftPVccRetryThreshold Indicates the number of consecutive call setup attempts for the same Soft PVCC which need to fail before the atmSoftPvcCallFailures object is incremented. A value of zero indicate…	column	Integer32	`.1.3.6.1.4.1.353.5.5.1.1.2.1.12`
atmSoftPVccRetryFailures Indicates how many attempts to establish the connection have failed. This count is reset whenever a connection is successfully established or the Soft PVCC is restarted.	column	SNMPv2-SMIGauge32	`.1.3.6.1.4.1.353.5.5.1.1.2.1.13`
atmSoftPVccRetryLimit Sets a maximum limit on how many consecutive unsuccessful call setup attempts can be made before stopping the attempt to set up the connection. If this limit is reached then manag…	column	Integer32	`.1.3.6.1.4.1.353.5.5.1.1.2.1.14`
atmSoftPVccRowStatus Used to create and delete a Soft PVCC. When this object is set to 'active' an attempt is made to set up the Soft PVCC. When this object has the value 'active' and is set to anothe…	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.353.5.5.1.1.2.1.15`
atmSoftPVccTargetAddress The target ATM Address of this Soft PVCC. If no address is supplied, no attempts to establish the Soft PVCC are initiated.	column	AtmAddr	`.1.3.6.1.4.1.353.5.5.1.1.2.1.2`
atmSoftPVccTargetSelectType Indicates whether the target VPI/VCI values are to be used at the destination. If the value 'any' is specified, the destination switch will choose the VPI/VCI value…	column	Enumeration	`.1.3.6.1.4.1.353.5.5.1.1.2.1.3`
atmSoftPVccTargetVpi The VPI value of the VCL used at the target interface. This value is not relevant when the value of atmSoftPVccTargetSelectType is 'any'.	column	Integer32	`.1.3.6.1.4.1.353.5.5.1.1.2.1.4`
atmSoftPVccTargetVci The VCI value of the VCL used at the target interface. This value must be filled in when the atmSoftPVccTargetSelectType is set to 'required'.This value is not relevant when the …	column	Integer32	`.1.3.6.1.4.1.353.5.5.1.1.2.1.5`
atmSoftPVccLastReleaseCause Value of the Cause field of the Cause Information Element in the last RELEASE signalling message received for this Soft PVCC. Indicates the reason for the Release.	column	Integer32	`.1.3.6.1.4.1.353.5.5.1.1.2.1.6`
atmSoftPVccLastReleaseDiagnostic Value of the first 8 bytes of diagnostic information from the Cause field of the Cause Information Element in the last RELEASE signalling message received for this Soft PVCC.	column	OctetString	`.1.3.6.1.4.1.353.5.5.1.1.2.1.7`
atmSoftPVccOperStatus Describes the status of the Soft PVCC. Valid values are: other - none of the types specified below establishmentInProgress - connection or party is not …	column	Enumeration	`.1.3.6.1.4.1.353.5.5.1.1.2.1.8`
atmSoftPVccRestart When the value is set to 'restart' the Soft PVCC is released if necessary and a new setup procedure is begun. As a result of this action, the atmSoftPVccOperStatus object transiti…	column	Enumeration	`.1.3.6.1.4.1.353.5.5.1.1.2.1.9`