atmSoftPVpcRetryTimer
ATM-SOFT-PVC-MIB ·
.1.3.6.1.4.1.353.5.5.1.1.3.1.10
Object
column
seconds Integer32
Indicates the current value of the retry timer for this connection. When the value reaches zero an attempt will be made to establish the Soft PVPC. When the timer is not running, the value zero shall be returned.
Context
- MIB
- ATM-SOFT-PVC-MIB
- OID
.1.3.6.1.4.1.353.5.5.1.1.3.1.10- Type
- column
- Access
- readonly
- Status
- current
- Units
- seconds
- Parent
- atmSoftPVpcEntry
- Table
- atmSoftPVpcTable
- Siblings
- 13
Syntax
seconds Integer32
Values & Constraints
Object Constraints
range: 0-86400
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| atmSoftPVpcLeafReference An arbitrary integer which, in the case of the
source VPL having a atmVplCastType of
'p2mpRoot', serves to distinguish between the
multiple leaves attached to a root of a
point-to… | column | Integer32 | .1.3.6.1.4.1.353.5.5.1.1.3.1.1 |
| atmSoftPVpcRetryThreshold Indicates the number of consecutive call setup attempts for
the same Soft PVPC which need to fail before the
atmSoftPvcCallFailures object is incremented. A value of
zero indicate… | column | Integer32 | .1.3.6.1.4.1.353.5.5.1.1.3.1.11 |
| atmSoftPVpcRetryFailures Indicates how many attempts to establish the connection
have failed. This count is reset whenever a connection
is successfully established or the Soft PVPC is restarted. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.353.5.5.1.1.3.1.12 |
| atmSoftPVpcRetryLimit Sets a maximum limit on how many consecutive unsuccessful
call setup attempts can be made before stopping the attempt
to set up the connection. If this limit is reached then
manag… | column | Integer32 | .1.3.6.1.4.1.353.5.5.1.1.3.1.13 |
| atmSoftPVpcRowStatus Used to create and delete a Soft PVPC. When this
object is set to 'active' an attempt is made to
set up the Soft PVPC. When this object has the value
'active' and is set to anothe… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.353.5.5.1.1.3.1.14 |
| atmSoftPVpcTargetAddress The target ATM Address of this Soft PVPC. If no
address is supplied, no attempts to establish the
Soft PVPC are initiated. | column | AtmAddr | .1.3.6.1.4.1.353.5.5.1.1.3.1.2 |
| atmSoftPVpcTargetSelectType Indicates whether the target VPI value
is to be used at the destination.
If the value 'any' is specified, the
destination switch will choose the VPI
value. In such a case, once th… | column | Enumeration | .1.3.6.1.4.1.353.5.5.1.1.3.1.3 |
| atmSoftPVpcTargetVpi The VPI value of the VPL used at the
target interface.
This value must be filled in when the
atmSoftPVpcTargetSelectType is set to 'required'.
This value is not rel… | column | Integer32 | .1.3.6.1.4.1.353.5.5.1.1.3.1.4 |
| atmSoftPVpcLastReleaseCause Value of the Cause field of the Cause
Information Element in the last RELEASE
signalling message received for this Soft PVPC.
Indicates the reason for the Release. | column | Integer32 | .1.3.6.1.4.1.353.5.5.1.1.3.1.5 |
| atmSoftPVpcLastReleaseDiagnostic Value of the first 8 bytes of diagnostic information
from the Cause field of the Cause Information Element
in the last RELEASE signalling message received for
this Soft PVPC. | column | OctetString | .1.3.6.1.4.1.353.5.5.1.1.3.1.6 |
| atmSoftPVpcOperStatus Describes the status of the Soft PVPC.
other - none of the types specified below
establishmentInProgress - connection or party is not
opera… | column | Enumeration | .1.3.6.1.4.1.353.5.5.1.1.3.1.7 |
| atmSoftPVpcRestart When the value is set to 'restart', the Soft PVPC is
released if necessary and a new setup procedure is begun.
As a result of this action, the atmSoftPVpcOperStatus
object transit… | column | Enumeration | .1.3.6.1.4.1.353.5.5.1.1.3.1.8 |
| atmSoftPVpcRetryInterval Defines the period to wait before attempting
to establish the Soft PVPC after the first failed
call attempt. The time to wait between subsequent
call attempts may differ to impl… | column | seconds Integer32 | .1.3.6.1.4.1.353.5.5.1.1.3.1.9 |