AGENT-GENERAL-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
19
Rows
19
Columns
131
agentMibCapabilityTable
table.1.3.6.1.4.1.171.12.1.1.2
·
1 row entry
·
4 columns
A list of MIB capability entries supported by this agent.
A MIB capability entry containing objects that describe a particular MIB
supported by this agent.
supported by this agent.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
agentMibCapabilityIndex
A list of Agent MIB Capability Description entries.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.171.12.1.1.2.1.1 |
|
agentMibCapabilityDescr
The name of the MIB supported by the agent.
|
OctetString | .1.3.6.1.4.1.171.12.1.1.2.1.2 |
|
agentMibCapabilityVersion
The version of the MIB specified in this entry.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.171.12.1.1.2.1.3 |
|
agentMibCapabilityType
The type of MIB specified in this entry.
|
Enumeration | .1.3.6.1.4.1.171.12.1.1.2.1.4 |
.1.3.6.1.4.1.171.12.1.1.8
·
1 row entry
·
4 columns
This table specifies the current utilization of a specified port.
A list of information regarding the port utilization function.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
agentPORTutilizationProtIndex
This object indicates the module's port number.
|
Integer32 | .1.3.6.1.4.1.171.12.1.1.8.1.1 |
|
agentPORTutilizationTX
The current rate of transmitted frames on the specified port.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.171.12.1.1.8.1.2 |
|
agentPORTutilizationRX
The current rate of received frames on the specified port.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.171.12.1.1.8.1.3 |
|
agentPORTutilizationUtil
The current percentages regarding port statistics.
|
%Integer32 | .1.3.6.1.4.1.171.12.1.1.8.1.4 |
.1.3.6.1.4.1.171.12.1.1.9
·
1 row entry
·
4 columns
Information about DRAM memory.
A list of information about DRAM memory.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
agentDRAMutilizationUnitID
Specifies the unit ID.
If the ID equals zero, it means the current device. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.171.12.1.1.9.1.1 |
|
agentDRAMutilizationTotalDRAM
The size of total DRAM memory.
|
KBSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.171.12.1.1.9.1.2 |
|
agentDRAMutilizationUsedDRAM
The size of used DRAM memory.
|
KBSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.171.12.1.1.9.1.3 |
|
agentDRAMutilization
The percentage of used DRAM memory of the total DRAM memory available.
The value will be between 0% (idle) and 100% (very busy). |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.171.12.1.1.9.1.4 |
.1.3.6.1.4.1.171.12.1.1.10
·
1 row entry
·
4 columns
Information about the flash memory.
Information about the flash memory.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
agentFLASHutilizationUnitID
Specifies the unit ID.
If the ID equals zero, it means the current device. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.171.12.1.1.10.1.1 |
|
agentFLASHutilizationTotalFLASH
The total size of flash memory.
|
KBSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.171.12.1.1.10.1.2 |
|
agentFLASHutilizationUsedFLASH
The size of the used flash memory.
|
KBSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.171.12.1.1.10.1.3 |
|
agentFLASHutilization
The percentage of used flash memory in total flash memory.
The value will be between 0% (idle) and 100% (very busy). |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.171.12.1.1.10.1.4 |
agentBscSwFileTable
table.1.3.6.1.4.1.171.12.1.2.1
·
1 row entry
·
16 columns
A list of MIB Basic Config entry support files updated by this agent.
A basic configuration entry containing the objects that describe a particular MIB
supported by this agent.
supported by this agent.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
agentBscSwFileIndex
The table index for the file entry
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.171.12.1.2.1.1.1 |
||||
|
agentBscSwFileDscr
The description of the software file purpose in this entry.
Note: For systems that do not support a change to this object, setting a value for this object will cause the system to return bad-value error messages. |
OctetStringr/w | .1.3.6.1.4.1.171.12.1.2.1.1.2 |
||||
|
agentBscSwFileAddr
The IP address where the file that needs to be downloaded is located, or the IP address
where the file will be uploaded to. |
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.171.12.1.2.1.1.3 |
||||
|
agentBscSwFileTransferType
The channel through which the file will be downloaded or uploaded.
Note: For systems that do not support all channels, setting a value to the unsupported channel will cause the system to return bad-value error messages. |
Enumerationr/w | .1.3.6.1.4.1.171.12.1.2.1.1.4 |
||||
|
agentBscSwFile
The name of the file to be downloaded from, or uploaded to, the TFTP server.
|
OctetStringr/w | .1.3.6.1.4.1.171.12.1.2.1.1.5 |
||||
|
agentBscSwFileLocateId
This object describes the type of file.
runtime-code (1), log-file (2), cfg-file (3) Note: For systems that do not support changes to this object, setting a value for this object will cause the system to return bad-valu… |
Integer32r/w | .1.3.6.1.4.1.171.12.1.2.1.1.6 |
||||
|
agentBscSwFileLoadType
This object provides the user with a choice of uploading or downloading the selected file.
Note: For systems that do not support a change to this object, setting a value for this object will cause the system to return … |
Enumerationr/w | .1.3.6.1.4.1.171.12.1.2.1.1.7 |
||||
|
agentBscSwFileCtrl
This object gives the user the option of downloading runtime software. This setting will take effect
when the system restarts. See Note (1) below Note: For systems that do not supp… |
Enumerationr/w | .1.3.6.1.4.1.171.12.1.2.1.1.8 |
||||
|
agentBscSwFileBIncrement
This object indicates whether the previous configuration will remain
valid or not after downloading the configuration file. True: Keep valid False: Erase. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.171.12.1.2.1.1.9 |
||||
|
agentBscSwFileCtrlID
The section ID of the firmware image or configuration file.
A value of 0 indicates the boot-up firmware image or configuration file. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.171.12.1.2.1.1.10 |
||||
|
agentBscSwFileCtrlUnitID
Specifies which unit of the switch stack the firmware image will be downloaded from.
One or more units can be set in this list. Each bit from the left to the right represents the switch from unit ID 1 to unit ID 12. A … |
UnitListr/w Textual Convention: UnitList OctetStringType Constraints: range: 0..3 |
.1.3.6.1.4.1.171.12.1.2.1.1.11 |
||||
|
agentBscSwFileIPv6Addr
The IPv6 address where the file will be downloaded from or uploaded to.
|
Ipv6Addressr/w Textual Convention: Ipv6Address OctetStringType Constraints: range: 16 |
.1.3.6.1.4.1.171.12.1.2.1.1.12 |
||||
|
agentBscSwFileBootUpImage
The result of the download will depend on whether the boot_up option is specified.
Case 1: In the case where the master unit provides the file system and the slave unit does not provide the file system, when boot_up … |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.171.12.1.2.1.1.13 |
||||
|
agentBscSwFileForceAgree
When the force_agree option is specified, the reboot command will be executed
immediately, without any further confirmation from the user. True: force_agree option is specified. False: force_agree option … |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.171.12.1.2.1.1.14 |
||||
|
agentBscSwFileInterfaceName
This node is used to specify the interface name when the agentBscSwFileIPv6Addr
is the link local address. |
OctetStringr/w | .1.3.6.1.4.1.171.12.1.2.1.1.15 |
||||
|
agentBscSwFileServerDomainName
This object indicates the domain name of the TFTP server.
|
OctetStringr/w | .1.3.6.1.4.1.171.12.1.2.1.1.16 |
swMultiImageInfoTable
table.1.3.6.1.4.1.171.12.1.2.7
·
1 row entry
·
7 columns
A list of information about multiple image management.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
swMultiImageInfoID
The stacking section ID of the firmware image.
The stacking section ID = 256 * Unit ID + Image File ID. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.171.12.1.2.7.1.1 |
|
swMultiImageVersion
The recorded downloaded firmware version.
|
OctetString | .1.3.6.1.4.1.171.12.1.2.7.1.2 |
|
swMultiImageSize
The recorded downloaded firmware size.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.171.12.1.2.7.1.3 |
|
swMultiImageUpdateTime
The recorded firmware update time.
|
OctetString | .1.3.6.1.4.1.171.12.1.2.7.1.4 |
|
swMultiImageFrom
The recorded IP address of the TFTP server
|
OctetString | .1.3.6.1.4.1.171.12.1.2.7.1.5 |
|
swMultiImageSendUser
The record of the user who downloaded the firmware.
|
OctetString | .1.3.6.1.4.1.171.12.1.2.7.1.6 |
|
swMultiImageFileName
When the system is set to boot from SD card, this object will display the recorded path name of the boot firmware file.
|
OctetString | .1.3.6.1.4.1.171.12.1.2.7.1.7 |
swMultiCfgInfoTable
table.1.3.6.1.4.1.171.12.1.2.8.1
·
1 row entry
·
7 columns
A list of information about multiple configuration files.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
swMultiCfgInfoID
The section ID of the configuration files.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.171.12.1.2.8.1.1.1 |
|
swMultiCfgVersion
The recorded downloaded configuration version.
|
OctetString | .1.3.6.1.4.1.171.12.1.2.8.1.1.2 |
|
swMultiCfgSize
The recorded downloaded configuration size (in bytes).
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.171.12.1.2.8.1.1.3 |
|
swMultiCFgUpdateTime
The recorded configuration update time
displayed in string format, i.e. yyyy/mon/dd hh:mm:ss. |
OctetString | .1.3.6.1.4.1.171.12.1.2.8.1.1.4 |
|
swMultiCfgFrom
The recorded IP address of the TFTP server.
|
OctetString | .1.3.6.1.4.1.171.12.1.2.8.1.1.5 |
|
swMultiCfgSendUser
The record of the user who downloaded the configuration file
|
OctetString | .1.3.6.1.4.1.171.12.1.2.8.1.1.6 |
|
swMultiCfgFileName
When the system is set to boot from SD card, this object displays the recorded path name of the boot configuration file.
|
OctetString | .1.3.6.1.4.1.171.12.1.2.8.1.1.7 |
swMultiCfgCtrlTable
table.1.3.6.1.4.1.171.12.1.2.8.4
·
1 row entry
·
2 columns
A list of information about multiple configuration management.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
swMultiCfgCtrlID
The section ID of the configuration file.
|
Enumeration | .1.3.6.1.4.1.171.12.1.2.8.4.1.1 |
|
swMultiCfgAction
save: Save configuration to active configuration ID when the parameter is omitted.
active: Set any valid configuration as the active configuration. delete: Removes the configuration from the flash memory. This configura… |
Enumerationr/w | .1.3.6.1.4.1.171.12.1.2.8.4.1.2 |
agentTrustedHostTable
table.1.3.6.1.4.1.171.12.1.2.10.1
·
1 row entry
·
13 columns
This table contains the trusted host information.
A list of information about the trusted hosts.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
agentTrustedHostIndex
The index of the trusted host entry.
|
Integer32 | .1.3.6.1.4.1.171.12.1.2.10.1.1.1 |
||||||||||||||
|
agentTrustedHostIPAddress
Specifies the IP address of the trusted host.
|
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.171.12.1.2.10.1.1.2 |
||||||||||||||
|
agentTrustedHostRowStatus
Indicates the status of this entry. When creating a trusted host
entry, the IP address should also be set. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.171.12.1.2.10.1.1.3 |
||||||||||||||
|
agentTrustedHostIPSubnetMask
Specifies the IP subnet mask of the trusted host.
|
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.171.12.1.2.10.1.1.4 |
||||||||||||||
|
agentTrustedHostForSNMP
Specifies the trusted host for SNMP.
|
Enumerationr/w | .1.3.6.1.4.1.171.12.1.2.10.1.1.5 |
||||||||||||||
|
agentTrustedHostForTELNET
Specifies the trusted host for Telnet.
|
Enumerationr/w | .1.3.6.1.4.1.171.12.1.2.10.1.1.6 |
||||||||||||||
|
agentTrustedHostForSSH
Specifies the trusted host for SSH.
|
Enumerationr/w | .1.3.6.1.4.1.171.12.1.2.10.1.1.7 |
||||||||||||||
|
agentTrustedHostForHTTP
Specifies the trusted host for HTTP.
|
Enumerationr/w | .1.3.6.1.4.1.171.12.1.2.10.1.1.8 |
||||||||||||||
|
agentTrustedHostForHTTPS
Specifies the trusted host for HTTPS.
|
Enumerationr/w | .1.3.6.1.4.1.171.12.1.2.10.1.1.9 |
||||||||||||||
|
agentTrustedHostForPING
Specifies the trusted host for PING.
|
Enumerationr/w | .1.3.6.1.4.1.171.12.1.2.10.1.1.10 |
||||||||||||||
|
agentTrustedHostAddrType
The type of trusted host address as specified by
the 'agentTrustedHostAddr' object. |
INET-ADDRESS-MIBInetAddressTyper/w Textual Convention: INET-ADDRESS-MIBInetAddressType EnumerationType Values:
|
.1.3.6.1.4.1.171.12.1.2.10.1.1.11 |
||||||||||||||
|
agentTrustedHostAddr
Specifies the IP address of the trusted host.
|
INET-ADDRESS-MIBInetAddressr/w Textual Convention: INET-ADDRESS-MIBInetAddress OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.171.12.1.2.10.1.1.12 |
||||||||||||||
|
agentTrustedHostIPv6PrefixLen
Specifies the IPv6 prefix length of the IPv6 trusted host.
|
Integer32r/w | .1.3.6.1.4.1.171.12.1.2.10.1.1.13 |
agentFDBClearByPortTable
table.1.3.6.1.4.1.171.12.1.2.11.2
·
1 row entry
·
2 columns
Used to clear FDB entries by port.
This is an entry of the agentFDBClearByPortTable.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
agentFDBClearPortIndex
This object indicates the port number.
|
Integer32 | .1.3.6.1.4.1.171.12.1.2.11.2.1.1 |
|
agentFDBClearByPortAction
This object indicates whether to clear FDB or not.
|
Enumerationr/w | .1.3.6.1.4.1.171.12.1.2.11.2.1.2 |
agentFDBClearByVlanTable
table.1.3.6.1.4.1.171.12.1.2.11.3
·
1 row entry
·
2 columns
Used to clear FDB entries by port.
This is an entry of agentFDBClearByPortTable.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
agentFDBClearVid
This object indicates the VLAN-ID.
|
Q-BRIDGE-MIBVlanId Textual Convention: Q-BRIDGE-MIBVlanId Integer32Type Constraints: range: 1..4094 |
.1.3.6.1.4.1.171.12.1.2.11.3.1.1 |
|
agentFDBClearByVlanAction
This object indicates whether to clear the FDB or not.
|
Enumerationr/w | .1.3.6.1.4.1.171.12.1.2.11.3.1.2 |
agentFDBSecurityTable
table.1.3.6.1.4.1.171.12.1.2.11.4
·
1 row entry
·
6 columns
Used to display the FDB entries that have been created by the security module.
This is an entry of agentFDBSecurityTable.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
agentFDBVid
This object indicates the VLAN-ID.
|
Q-BRIDGE-MIBVlanId Textual Convention: Q-BRIDGE-MIBVlanId Integer32Type Constraints: range: 1..4094 |
.1.3.6.1.4.1.171.12.1.2.11.4.1.1 |
|
agentFDBMacAddress
This object indicates the MAC address.
|
SNMPv2-TCMacAddress Textual Convention: SNMPv2-TCMacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.171.12.1.2.11.4.1.2 |
|
agentFDBPort
This object indicates the port number.
|
Integer32 | .1.3.6.1.4.1.171.12.1.2.11.4.1.3 |
|
agentFDBType
This object indicates the MAC address type.
|
Enumeration | .1.3.6.1.4.1.171.12.1.2.11.4.1.4 |
|
agentFDBStatus
This object indicates the MAC address's forwarding status.
|
Enumeration | .1.3.6.1.4.1.171.12.1.2.11.4.1.5 |
|
agentFDBSecurityModule
This object is used to indicate which security module created the current MAC address.
dot1x: 802.1X. wac: Web-based Access Control. jwac: Web-Based Access Control extension for Japan. port-security: Port Security. mac… |
Enumeration | .1.3.6.1.4.1.171.12.1.2.11.4.1.6 |
agentGratuitousARPTable
table.1.3.6.1.4.1.171.12.1.2.12.2.4
·
1 row entry
·
4 columns
Gratuitous ARP Table Information.
A list of information from the Gratuitous ARP Table.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
agentGratuitousARPInterfaceName
The name of the IP interface.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.171.12.1.2.12.2.4.1.1 |
|
agentGratuitousARPPeriodicalSendInterval
This is used to configure the interval for the periodic sending of
gratuitous ARP request packets. 0 means do not send gratuitous ARP request packets periodically. |
secondsInteger32r/w | .1.3.6.1.4.1.171.12.1.2.12.2.4.1.2 |
|
agentGratuitousARPTrapState
This indicates the state of the gratuitous ARP trap. The switch can
trap the IP conflict events to inform the administrator. By default, the trap is disabled. |
Enumerationr/w | .1.3.6.1.4.1.171.12.1.2.12.2.4.1.3 |
|
agentGratuitousARPLogState
This indicates the state of the gratuitous Log trap. The switch can
log the IP conflict events to inform the administrator. By default, the event log is enabled. |
Enumerationr/w | .1.3.6.1.4.1.171.12.1.2.12.2.4.1.4 |
swMultiImageCtrlTable
table.1.3.6.1.4.1.171.12.1.2.13
·
1 row entry
·
2 columns
A list of information about multiple image management.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
swMultiImageCtrlID
The stacking section ID of the firmware image.
The stacking section ID = 256 * Unit ID + Image File ID. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.171.12.1.2.13.1.1 |
|
swMultiImageCtrlAction
This object indicates the running status of the image which is
specified by swMultiImageCtrlID and swMultiImageCtrlUnitID. config-as-bootup-fw (1) - Configured as the bootup firmware by the indicated firm… |
Enumerationr/w | .1.3.6.1.4.1.171.12.1.2.13.1.2 |
agentBscFileSystemTable
table.1.3.6.1.4.1.171.12.1.2.18.1
·
1 row entry
·
15 columns
A list of MIB File System Basic Configuration entries supported by the file update of this agent.
A File System basic configuration entry that contains objects
describing a particular MIB supported by this agent.
describing a particular MIB supported by this agent.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
agentBscFileSystemIndex
The table index for the file entry.
This object describes the file type. runtime-code (1), log-file (2), cfg-file (3), attack-log-file (7) |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.171.12.1.2.18.1.1.1 |
||||
|
agentBscFileSystemDscr
The description of the software file purpose in this entry.
|
OctetString | .1.3.6.1.4.1.171.12.1.2.18.1.1.2 |
||||
|
agentBscFileSystemServerAddr
The IP address where the file to be downloaded is located, or the IP address
where the file will be uploaded to. |
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.171.12.1.2.18.1.1.3 |
||||
|
agentBscFileSystemServerIPv6Addr
The IPv6 address where the file is to be downloaded from or uploaded to.
|
Ipv6Addressr/w Textual Convention: Ipv6Address OctetStringType Constraints: range: 16 |
.1.3.6.1.4.1.171.12.1.2.18.1.1.4 |
||||
|
agentBscFileSystemServerFileName
The name of the file to be downloaded from or uploaded to the TFTP server.
If agentBscFileSystemDeviceFileName is not set, the switch will default to using the bootup file as the runtime image for the switch. |
OctetStringr/w | .1.3.6.1.4.1.171.12.1.2.18.1.1.5 |
||||
|
agentBscFileSystemDeviceDriverID
Specifies the drive of the device that the firmware to be uploaded/downloaded is located.
If none (1) is specified, the switch will default to the current drive. |
Enumerationr/w | .1.3.6.1.4.1.171.12.1.2.18.1.1.6 |
||||
|
agentBscFileSystemDeviceFileName
The name of the file to be downloaded to the device, or uploaded from the
device. When downloading or uploading, the agentBscFileSystemServerFileName object must also be set. |
OctetStringr/w | .1.3.6.1.4.1.171.12.1.2.18.1.1.7 |
||||
|
agentBscFileSystemLoadType
This object allows the user to select a download or upload function for the file.
Note: For systems that do not support changes to this object, setting a value for this object will cause the system to ret… |
Enumerationr/w | .1.3.6.1.4.1.171.12.1.2.18.1.1.8 |
||||
|
agentBscFileSystemCtrlUnitID
Specifies which unit of the switch stack the firmware image or configuration file should be downloaded from.
One or more units can be set in this list. Each bit from left to right represents the switch from unit ID 1 to… |
UnitListr/w Textual Convention: UnitList OctetStringType Constraints: range: 0..3 |
.1.3.6.1.4.1.171.12.1.2.18.1.1.9 |
||||
|
agentBscFileSystemBootUpImage
The result of the download will depend on whether the boot_up option has been specified.
Case 1: In the case of the master unit providing the file system and the slave unit not providing the file system, when the boo… |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.171.12.1.2.18.1.1.10 |
||||
|
agentBscFileSystemForceAgree
When the force_agree option is specified, the reboot command will be executed immediately
without any further confirmation from the user. True: force_agree option is specified. False: force_agree option i… |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.171.12.1.2.18.1.1.11 |
||||
|
agentBscFileSystemCtrl
This object allows the user to download runtime software. The settings
will take effect when the system restarts. See Note (1) below Note 1: For systems which do not support value changes to this object, … |
Enumerationr/w | .1.3.6.1.4.1.171.12.1.2.18.1.1.12 |
||||
|
agentBscFileSystemInterfaceName
This node is used to specify the interface name when agentBscFileSystemServerIPv6Addr
is the local link address. |
OctetStringr/w | .1.3.6.1.4.1.171.12.1.2.18.1.1.13 |
||||
|
agentBscFileSystemServerDomainName
This object indicates the domain name of the TFTP server.
|
OctetStringr/w | .1.3.6.1.4.1.171.12.1.2.18.1.1.14 |
||||
|
agentBscFileSystemIncrement
If increment is specified, then the existing configuration will not be cleared before applying
of the new configuration. If it is not specified, then the existing configuration will be cleared before applying of the new… |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.171.12.1.2.18.1.1.15 |
.1.3.6.1.4.1.171.12.1.2.18.5
·
1 row entry
·
5 columns
This table indicates the information about the bootup files.
A list of information about the bootup files for each unit of the switch stack.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
agentFileSystemUnit
The unit ID.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.171.12.1.2.18.5.1.1 |
|
agentFileSystemDriverID
The drive on the device that the configuration file will be saved to.
If none (1) is specified, the switch will place the file to the current drive by default. |
Enumerationr/w | .1.3.6.1.4.1.171.12.1.2.18.5.1.2 |
|
agentFileSystemBootImage
When displayed, it shows the current bootup image file name.
When set, the set name will be set as the bootup image. |
OctetStringr/w | .1.3.6.1.4.1.171.12.1.2.18.5.1.3 |
|
agentFileSystemBootConfig
When displayed, it shows the current bootup configuration file name.
When set, the set name will be set as the bootup configuration. |
OctetStringr/w | .1.3.6.1.4.1.171.12.1.2.18.5.1.4 |
|
agentFileSystemActConfig
When displayed, it shows null.
When set, the set name will be active at once, but the set name will not be set as the bootup configuration. |
OctetStringr/w | .1.3.6.1.4.1.171.12.1.2.18.5.1.5 |
agentFTPFileTable
table.1.3.6.1.4.1.171.12.1.2.21
·
1 row entry
·
16 columns
A list of the MIB Basic Config entries support files updated by this agent.
A basic configuration entry containing the objects describing a particular MIB
supported by this agent.
supported by this agent.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
agentFTPFileIndex
The table index for the file entry. This object describes the file type
runtime-code (1), log-file (2), cfg-file (3) |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.171.12.1.2.21.1.1 |
||||
|
agentFTPFileDscr
The description of the software file purpose in this entry.
Note: For systems which do not support changes to this object, setting a value for this object will cause the system to return bad-value error messages. |
OctetStringr/w | .1.3.6.1.4.1.171.12.1.2.21.1.2 |
||||
|
agentFTPFileLoadType
This object provides the user with a choice of uploading or downloading the selected file.
Note: For systems which do not support a change of this object, setting a value to this object will cause the system to return b… |
Enumerationr/w | .1.3.6.1.4.1.171.12.1.2.21.1.3 |
||||
|
agentFTPFileAddr
The IP address that the file to be downloaded is located on, or the IP address
where the file will be uploaded to. |
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.171.12.1.2.21.1.4 |
||||
|
agentFTPTCPPort
The TCP port number being used to establish the command connection.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.171.12.1.2.21.1.5 |
||||
|
agentFTPFileName
The name of the file to be downloaded from, or uploaded to, the FTP server.
|
OctetStringr/w | .1.3.6.1.4.1.171.12.1.2.21.1.6 |
||||
|
agentFTPUserName
This is the user name to enter in upload/download.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.171.12.1.2.21.1.7 |
||||
|
agentFTPPassword
This is the password to enter for an upload/download.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.171.12.1.2.21.1.8 |
||||
|
agentFTPFileCtrlID
The section ID of the firmware image or configuration file.
A value of 0 indicates the boot-up firmware image or configuration file. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.171.12.1.2.21.1.9 |
||||
|
agentFTPFileBIncrement
This object indicates whether the previous configuration will remain
valid or not after downloading the configuration file. True: Keep valid False: Erase. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.171.12.1.2.21.1.10 |
||||
|
agentFTPFileCtrl
This object gives the user the option to download runtime software. The setting will take effect
when the system restarts. See Note (1) below Note 1: For systems which do not support changes to this object, se… |
Enumerationr/w | .1.3.6.1.4.1.171.12.1.2.21.1.11 |
||||
|
agentFTPFileBootUpImage
This object indicates whether to set the special file as a boot up file or not.
True: The boot-up option is specified. False: The boot-up option is not specified. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.171.12.1.2.21.1.12 |
||||
|
agentFTPFileForceAgree
When the force-agree option is specified, the reboot command will be executed
immediately without any further confirmation from the user. True: Force-agree option is specified. False: Force-agree option is not specified. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.171.12.1.2.21.1.13 |
||||
|
agentFTPFileIPv6Addr
The IPv6 address where the file is to be downloaded from or uploaded to.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.171.12.1.2.21.1.14 |
||||
|
agentFTPFileInterfaceName
This node is used to specify the interface name when agentFTPFileIPv6Addr
is the local link address. |
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.171.12.1.2.21.1.15 |
||||
|
agentFTPFileUnitID
Specifies which unit of the switch stack the firmware image or configuration
file should be downloaded from. One or more units can be set in this list. Each bit from left to right represents the switch from unit ID 1 … |
UnitListr/w Textual Convention: UnitList OctetStringType Constraints: range: 0..3 |
.1.3.6.1.4.1.171.12.1.2.21.1.16 |
agentFTPFileSystemTable
table.1.3.6.1.4.1.171.12.1.2.25
·
1 row entry
·
13 columns
The FTP management table for the file system
A File System basic configuration entry that contains objects
describing a particular MIB supported by this agent.
describing a particular MIB supported by this agent.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
agentFTPFileSystemIndex
The table index for the file entry.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.171.12.1.2.25.1.1 |
||||||||||||||
|
agentFTPFileSystemDscr
The description of the software file purpose in this entry.
|
RFC1213-MIBDisplayString Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.171.12.1.2.25.1.2 |
||||||||||||||
|
agentFTPFileSystemLoadType
This object allows the user to select a download or upload function for the file.
|
Enumerationr/w | .1.3.6.1.4.1.171.12.1.2.25.1.3 |
||||||||||||||
|
agentFTPFileSystemAddressType
The address type of agentFTPFileSystemAddress.
|
INET-ADDRESS-MIBInetAddressTyper/w Textual Convention: INET-ADDRESS-MIBInetAddressType EnumerationType Values:
|
.1.3.6.1.4.1.171.12.1.2.25.1.4 |
||||||||||||||
|
agentFTPFileSystemAddress
This object indicates the FTP server address.
|
INET-ADDRESS-MIBInetAddressr/w Textual Convention: INET-ADDRESS-MIBInetAddress OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.171.12.1.2.25.1.5 |
||||||||||||||
|
agentFTPFileSystemTCPPort
The TCP port number being used to establish the control connection.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.171.12.1.2.25.1.6 |
||||||||||||||
|
agentFTPFileSystemServerFileName
The name of the file to be downloaded from or uploaded to the FTP server.
|
OctetStringr/w | .1.3.6.1.4.1.171.12.1.2.25.1.7 |
||||||||||||||
|
agentFTPFileSystemDeviceFileName
The name of the file to be downloaded to the device, or uploaded from the
device. If agentFTPFileSystemDeviceFileName is not set, the switch will default to the bootup file. |
OctetStringr/w | .1.3.6.1.4.1.171.12.1.2.25.1.8 |
||||||||||||||
|
agentFTPFileSystemUserName
This object indicates the user name to access the FTP server.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.171.12.1.2.25.1.9 |
||||||||||||||
|
agentFTPFileSystemPassword
This object indicates the password to access the FTP server.
|
RFC1213-MIBDisplayStringr/w Textual Convention: RFC1213-MIBDisplayString OctetString |
.1.3.6.1.4.1.171.12.1.2.25.1.10 |
||||||||||||||
|
agentFTPFileSystemCtrlUnitID
Specifies which unit of the switch stack the firmware image or configuration
file should be downloaded from. One or more units can be set in this list. Each bit from left to right represents the switch from unit ID 1 … |
UnitListr/w Textual Convention: UnitList OctetStringType Constraints: range: 0..3 |
.1.3.6.1.4.1.171.12.1.2.25.1.11 |
||||||||||||||
|
agentFTPFileSystemBootUpImage
This object indicates whether to set the special file as the boot up file or not.
True: The boot-up option is specified. False: The boot-up option is not specified. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.171.12.1.2.25.1.12 |
||||||||||||||
|
agentFTPFileSystemCtrl
This object allows the user to execute an FTP download/upload.
|
Enumerationr/w | .1.3.6.1.4.1.171.12.1.2.25.1.13 |
agentTrapManagerTable
table.1.3.6.1.4.1.171.12.1.4.2
·
1 row entry
·
5 columns
A list of trap managers that the SNMP traps will be sent to.
Each entry contains the particular trap manager's settings.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
agentTrapManagerIndex
A value that uniquely identifies trapDestEntry.
|
Integer32 | .1.3.6.1.4.1.171.12.1.4.2.1.1 |
|
agentTrapManagerIpAddr
The destination IP address for SNMP traps.
|
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.171.12.1.4.2.1.2 |
|
agentTrapManagerComm
The community string used to encode SNMP trap packets being sent to the trap
manager. |
OctetStringr/w | .1.3.6.1.4.1.171.12.1.4.2.1.3 |
|
agentTrapManagerMsgVer
This object indicates the version of trap packets that will be sent to
this trap manager. The default setting is SNMP Agent Version Dependent. Note: Because some of these functions… |
Enumerationr/w | .1.3.6.1.4.1.171.12.1.4.2.1.4 |
|
agentTrapManagerStatus
This object indicates whether or not the trap should be sent to
the trap manager. |
Enumerationr/w | .1.3.6.1.4.1.171.12.1.4.2.1.5 |