agentBscSwFileDscr
AGENT-GENERAL-MIB ·
.1.3.6.1.4.1.171.12.1.2.1.1.2
Object
column
r/w
OctetString
The description of the software file purpose in this entry. Note: For systems that do not support a change to this object, setting a value for this object will cause the system to return bad-value error messages.
Context
- MIB
- AGENT-GENERAL-MIB
- OID
.1.3.6.1.4.1.171.12.1.2.1.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- agentBscSwFileEntry
- Table
- agentBscSwFileTable
- Siblings
- 15
Syntax
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| agentBscSwFileIndex The table index for the file entry | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.171.12.1.2.1.1.1 |
| agentBscSwFileCtrlID The section ID of the firmware image or configuration file.
A value of 0 indicates the boot-up firmware image or configuration file. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.171.12.1.2.1.1.10 |
| agentBscSwFileCtrlUnitID Specifies which unit of the switch stack the firmware image will be downloaded from.
One or more units can be set in this list. Each bit from the left to the right represents the… | column | UnitList | .1.3.6.1.4.1.171.12.1.2.1.1.11 |
| agentBscSwFileIPv6Addr The IPv6 address where the file will be downloaded from or uploaded to. | column | Ipv6Address | .1.3.6.1.4.1.171.12.1.2.1.1.12 |
| agentBscSwFileBootUpImage The result of the download will depend on whether the boot_up option is specified.
Case 1: In the case where the master unit provides the file system and the slave unit does
no… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.171.12.1.2.1.1.13 |
| agentBscSwFileForceAgree When the force_agree option is specified, the reboot command will be executed
immediately, without any further confirmation from the user.
True: force_agree option … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.171.12.1.2.1.1.14 |
| agentBscSwFileInterfaceName This node is used to specify the interface name when the agentBscSwFileIPv6Addr
is the link local address. | column | OctetString | .1.3.6.1.4.1.171.12.1.2.1.1.15 |
| agentBscSwFileServerDomainName This object indicates the domain name of the TFTP server. | column | OctetString | .1.3.6.1.4.1.171.12.1.2.1.1.16 |
| agentBscSwFileAddr The IP address where the file that needs to be downloaded is located, or the IP address
where the file will be uploaded to. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.171.12.1.2.1.1.3 |
| agentBscSwFileTransferType The channel through which the file will be downloaded or uploaded.
Note: For systems that do not support all channels, setting a value to the unsupported
channel will cause the sy… | column | Enumeration | .1.3.6.1.4.1.171.12.1.2.1.1.4 |
| agentBscSwFile The name of the file to be downloaded from, or uploaded to, the TFTP server. | column | OctetString | .1.3.6.1.4.1.171.12.1.2.1.1.5 |
| agentBscSwFileLocateId This object describes the type of file.
runtime-code (1),
log-file (2),
cfg-file (3)
Note: For systems that do not support changes to this object, setting a value for
this object … | column | Integer32 | .1.3.6.1.4.1.171.12.1.2.1.1.6 |
| agentBscSwFileLoadType This object provides the user with a choice of uploading or downloading the selected file.
Note: For systems that do not support a change to this object, setting a value for this… | column | Enumeration | .1.3.6.1.4.1.171.12.1.2.1.1.7 |
| agentBscSwFileCtrl This object gives the user the option of downloading runtime software. This setting will take effect
when the system restarts. See Note (1) below
Note:
… | column | Enumeration | .1.3.6.1.4.1.171.12.1.2.1.1.8 |
| agentBscSwFileBIncrement This object indicates whether the previous configuration will remain
valid or not after downloading the configuration file.
True: Keep valid
False: Erase. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.171.12.1.2.1.1.9 |