agentBscSwFileBootUpImage
AGENT-GENERAL-MIB ·
.1.3.6.1.4.1.171.12.1.2.1.1.13
Object
The result of the download will depend on whether the boot_up option is specified.
Case 1: In the case where the master unit provides the file system and the slave unit does
not provide the file system, when boot_up is specified, the file will be downloaded
to the boot_up image on the slave. If boot_up is not specified, then the file will
not be downloaded to this slave unit.
Case 2: In the case where the master unit does not provide the file system and the slave unit
provides the file system, when boot_up is specified, the file will be downloaded to
the boot_up image on the slave unit. If boot_up is not specified, the file will
not be downloaded to this slave unit.
Case 3: In the case where the master unit and the slave unit both support or do not support
the file system, the file will be downloaded to the specified file on the slave unit.
If boot_up is specified, the downloaded file will be assigned as the boot_up image.
True: boot_up option is specified.
False: boot_up option is not specified.
Context
- MIB
- AGENT-GENERAL-MIB
- OID
.1.3.6.1.4.1.171.12.1.2.1.1.13- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- agentBscSwFileEntry
- Table
- agentBscSwFileTable
- Siblings
- 15
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| agentBscSwFileIndex The table index for the file entry | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.171.12.1.2.1.1.1 |
| agentBscSwFileCtrlID The section ID of the firmware image or configuration file.
A value of 0 indicates the boot-up firmware image or configuration file. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.171.12.1.2.1.1.10 |
| agentBscSwFileCtrlUnitID Specifies which unit of the switch stack the firmware image will be downloaded from.
One or more units can be set in this list. Each bit from the left to the right represents the… | column | UnitList | .1.3.6.1.4.1.171.12.1.2.1.1.11 |
| agentBscSwFileIPv6Addr The IPv6 address where the file will be downloaded from or uploaded to. | column | Ipv6Address | .1.3.6.1.4.1.171.12.1.2.1.1.12 |
| agentBscSwFileForceAgree When the force_agree option is specified, the reboot command will be executed
immediately, without any further confirmation from the user.
True: force_agree option … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.171.12.1.2.1.1.14 |
| agentBscSwFileInterfaceName This node is used to specify the interface name when the agentBscSwFileIPv6Addr
is the link local address. | column | OctetString | .1.3.6.1.4.1.171.12.1.2.1.1.15 |
| agentBscSwFileServerDomainName This object indicates the domain name of the TFTP server. | column | OctetString | .1.3.6.1.4.1.171.12.1.2.1.1.16 |
| agentBscSwFileDscr The description of the software file purpose in this entry.
Note: For systems that do not support a change to this object, setting a value for
this object will cause the system to… | column | OctetString | .1.3.6.1.4.1.171.12.1.2.1.1.2 |
| agentBscSwFileAddr The IP address where the file that needs to be downloaded is located, or the IP address
where the file will be uploaded to. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.171.12.1.2.1.1.3 |
| agentBscSwFileTransferType The channel through which the file will be downloaded or uploaded.
Note: For systems that do not support all channels, setting a value to the unsupported
channel will cause the sy… | column | Enumeration | .1.3.6.1.4.1.171.12.1.2.1.1.4 |
| agentBscSwFile The name of the file to be downloaded from, or uploaded to, the TFTP server. | column | OctetString | .1.3.6.1.4.1.171.12.1.2.1.1.5 |
| agentBscSwFileLocateId This object describes the type of file.
runtime-code (1),
log-file (2),
cfg-file (3)
Note: For systems that do not support changes to this object, setting a value for
this object … | column | Integer32 | .1.3.6.1.4.1.171.12.1.2.1.1.6 |
| agentBscSwFileLoadType This object provides the user with a choice of uploading or downloading the selected file.
Note: For systems that do not support a change to this object, setting a value for this… | column | Enumeration | .1.3.6.1.4.1.171.12.1.2.1.1.7 |
| agentBscSwFileCtrl This object gives the user the option of downloading runtime software. This setting will take effect
when the system restarts. See Note (1) below
Note:
… | column | Enumeration | .1.3.6.1.4.1.171.12.1.2.1.1.8 |
| agentBscSwFileBIncrement This object indicates whether the previous configuration will remain
valid or not after downloading the configuration file.
True: Keep valid
False: Erase. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.171.12.1.2.1.1.9 |