agentFTPFileUnitID
AGENT-GENERAL-MIB ·
.1.3.6.1.4.1.171.12.1.2.21.1.16
Object
column
r/w
UnitList
Specifies which unit of the switch stack the firmware image or configuration file should be downloaded from. One or more units can be set in this list. Each bit from left to right represents the switch from unit ID 1 to unit ID 12.If this list is set to null it represents all stack switches.
Context
- MIB
- AGENT-GENERAL-MIB
- OID
.1.3.6.1.4.1.171.12.1.2.21.1.16- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- agentFTPFileEntry
- Table
- agentFTPFileTable
- Siblings
- 15
Syntax
UnitList
- Source
- UnitList
- Base type
OctetString
Values & Constraints
Type Constraints
range: 0..3
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| agentFTPFileIndex The table index for the file entry. This object describes the file type
runtime-code (1),
log-file (2),
cfg-file (3) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.171.12.1.2.21.1.1 |
| agentFTPFileBIncrement This object indicates whether the previous configuration will remain
valid or not after downloading the configuration file.
True: Keep valid
False: Erase. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.171.12.1.2.21.1.10 |
| agentFTPFileCtrl This object gives the user the option to download runtime software. The setting will take effect
when the system restarts. See Note (1) below
Note 1:
For systems which d… | column | Enumeration | .1.3.6.1.4.1.171.12.1.2.21.1.11 |
| agentFTPFileBootUpImage This object indicates whether to set the special file as a boot up file or not.
True: The boot-up option is specified.
False: The boot-up option is not specified. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.171.12.1.2.21.1.12 |
| agentFTPFileForceAgree When the force-agree option is specified, the reboot command will be executed
immediately without any further confirmation from the user.
True: Force-agree option is specified.
Fa… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.171.12.1.2.21.1.13 |
| agentFTPFileIPv6Addr The IPv6 address where the file is to be downloaded from or uploaded to. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.171.12.1.2.21.1.14 |
| agentFTPFileInterfaceName This node is used to specify the interface name when agentFTPFileIPv6Addr
is the local link address. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.171.12.1.2.21.1.15 |
| agentFTPFileDscr The description of the software file purpose in this entry.
Note: For systems which do not support changes to this object, setting a value for
this object will cause the system to… | column | OctetString | .1.3.6.1.4.1.171.12.1.2.21.1.2 |
| agentFTPFileLoadType This object provides the user with a choice of uploading or downloading the selected file.
Note: For systems which do not support a change of this object, setting a value to this … | column | Enumeration | .1.3.6.1.4.1.171.12.1.2.21.1.3 |
| agentFTPFileAddr The IP address that the file to be downloaded is located on, or the IP address
where the file will be uploaded to. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.171.12.1.2.21.1.4 |
| agentFTPTCPPort The TCP port number being used to establish the command connection. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.171.12.1.2.21.1.5 |
| agentFTPFileName The name of the file to be downloaded from, or uploaded to, the FTP server. | column | OctetString | .1.3.6.1.4.1.171.12.1.2.21.1.6 |
| agentFTPUserName This is the user name to enter in upload/download. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.171.12.1.2.21.1.7 |
| agentFTPPassword This is the password to enter for an upload/download. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.171.12.1.2.21.1.8 |
| agentFTPFileCtrlID The section ID of the firmware image or configuration file.
A value of 0 indicates the boot-up firmware image or configuration file. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.171.12.1.2.21.1.9 |