ADSL-LINE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

197

adslLineTable

table

.1.3.6.1.2.1.10.94.1.1.1 · 1 row entry · 5 columns

Open in standard view

This table includes common attributes describing
both ends of the line.  It is required for all ADSL
physical interfaces.  ADSL physical interfaces are
those ifEntries where ifType is equal to adsl(94).

adslLineEntry entry .1.3.6.1.2.1.10.94.1.1.1.1

An entry in adslLineTable.

Indexes

IF-MIBifIndex

Column Syntax OID

adslLineCoding

Specifies the ADSL coding type used on this
line.

ADSL-TC-MIBAdslLineCodingType

Textual Convention: ADSL-TC-MIBAdslLineCodingType Enumeration

Type Values:

1	other
2	dmt
3	cap
4	qam

.1.3.6.1.2.1.10.94.1.1.1.1.1

adslLineType

Defines the type of ADSL physical line
entity that exists, by defining whether and how
the line is channelized. If the line is channelized,
the value will be other than noChannel(1). This
object defines which channel …

Enumeration

Enumerated Values:

1	noChannel
2	fastOnly
3	interleavedOnly
4	fastOrInterleaved
5	fastAndInterleaved

.1.3.6.1.2.1.10.94.1.1.1.1.2

adslLineSpecific

OID instance in vendor-specific MIB. The Instance may
be used to determine shelf/slot/port of the ATUC
interface in a DSLAM.

SNMPv2-TCVariablePointer

Textual Convention: SNMPv2-TCVariablePointer ObjectIdentifier

.1.3.6.1.2.1.10.94.1.1.1.1.3

adslLineConfProfile

The value of this object identifies the row
in the ADSL Line Configuration Profile Table,
(adslLineConfProfileTable), which applies for this
ADSL line, and channels if applicable.

For `dynamic' mode, in t…

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.2.1.10.94.1.1.1.1.4

adslLineAlarmConfProfile

The value of this object identifies the row
in the ADSL Line Alarm Configuration Profile Table,
(adslLineAlarmConfProfileTable), which applies to this
ADSL line, and channels if applicable.

For `dynamic' …

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.2.1.10.94.1.1.1.1.5

adslAtucPhysTable

table

.1.3.6.1.2.1.10.94.1.1.2 · 1 row entry · 8 columns

Open in standard view

This table provides one row for each ATUC.
Each row contains the Physical Layer Parameters
table for that ATUC. ADSL physical interfaces are
those ifEntries where ifType is equal to adsl(94).

adslAtucPhysEntry entry .1.3.6.1.2.1.10.94.1.1.2.1

An entry in the adslAtucPhysTable.

Indexes

IF-MIBifIndex

Column Syntax OID

adslAtucInvSerialNumber

The vendor specific string that identifies the
vendor equipment.

OctetString

Constraints:
range: 0-32

.1.3.6.1.2.1.10.94.1.1.2.1.1

adslAtucInvVendorID

The vendor ID code is a copy of the binary
vendor identification field defined by the
PHY[10] and expressed as readable characters.

OctetString

Constraints:
range: 0-16

.1.3.6.1.2.1.10.94.1.1.2.1.2

adslAtucInvVersionNumber

The vendor specific version number sent by this ATU
as part of the initialization messages. It is a copy
of the binary version number field defined by the
PHY[10] and expressed as readable characters.

OctetString

Constraints:
range: 0-16

.1.3.6.1.2.1.10.94.1.1.2.1.3

adslAtucCurrSnrMgn

Noise Margin as seen by this ATU with respect to its
received signal in tenth dB.

tenth dBInteger32

Constraints:
range: -640-640

.1.3.6.1.2.1.10.94.1.1.2.1.4

adslAtucCurrAtn

Measured difference in the total power transmitted by
the peer ATU and the total power received by this ATU.

tenth dBUnsigned32

Constraints:
range: 0-630

.1.3.6.1.2.1.10.94.1.1.2.1.5

adslAtucCurrStatus

Indicates current state of the ATUC line. This is a
bit-map of possible conditions. The various bit
positions are:

0 noDefect There no defects on the line

1 lossOfFr…

Bits

Enumerated Values:

0	noDefect
1	lossOfFraming
2	lossOfSignal
3	lossOfPower
4	lossOfSignalQuality
5	lossOfLink
6	dataInitFailure
7	configInitFailure
8	protocolInitFailure
9	noPeerAtuPresent

.1.3.6.1.2.1.10.94.1.1.2.1.6

adslAtucCurrOutputPwr

Measured total output power transmitted by this ATU.
This is the measurement that was reported during
the last activation sequence.

tenth dBmInteger32

Constraints:
range: -310-310

.1.3.6.1.2.1.10.94.1.1.2.1.7

adslAtucCurrAttainableRate

Indicates the maximum currently attainable data rate
by the ATU. This value will be equal or greater than

the current line rate.

bpsSNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.2.1.10.94.1.1.2.1.8

adslAturPhysTable

table

.1.3.6.1.2.1.10.94.1.1.3 · 1 row entry · 8 columns

Open in standard view

This table provides one row for each ATUR
Each row contains the Physical Layer Parameters
table for that ATUR. ADSL physical interfaces are
those ifEntries where ifType is equal to adsl(94).

adslAturPhysEntry entry .1.3.6.1.2.1.10.94.1.1.3.1

An entry in the adslAturPhysTable.

Indexes

IF-MIBifIndex

Column Syntax OID

adslAturInvSerialNumber

The vendor specific string that identifies the
vendor equipment.

OctetString

Constraints:
range: 0-32

.1.3.6.1.2.1.10.94.1.1.3.1.1

adslAturInvVendorID

The vendor ID code is a copy of the binary
vendor identification field defined by the
PHY[10] and expressed as readable characters.

OctetString

Constraints:
range: 0-16

.1.3.6.1.2.1.10.94.1.1.3.1.2

adslAturInvVersionNumber

OctetString

Constraints:
range: 0-16

.1.3.6.1.2.1.10.94.1.1.3.1.3

adslAturCurrSnrMgn

Noise Margin as seen by this ATU with respect to its
received signal in tenth dB.

tenth dBInteger32

Constraints:
range: -640-640

.1.3.6.1.2.1.10.94.1.1.3.1.4

adslAturCurrAtn

Measured difference in the total power transmitted by
the peer ATU and the total power received by this ATU.

tenth dBUnsigned32

Constraints:
range: 0-630

.1.3.6.1.2.1.10.94.1.1.3.1.5

adslAturCurrStatus

Indicates current state of the ATUR line. This is a
bit-map of possible conditions. Due to the isolation
of the ATUR when line problems occur, many state
conditions like loss of power, loss of quality signal,
and init…

Bits

Enumerated Values:

0	noDefect
1	lossOfFraming
2	lossOfSignal
3	lossOfPower
4	lossOfSignalQuality

.1.3.6.1.2.1.10.94.1.1.3.1.6

adslAturCurrOutputPwr

Measured total output power transmitted by this ATU.
This is the measurement that was reported during
the last activation sequence.

tenth dBmInteger32

Constraints:
range: -310-310

.1.3.6.1.2.1.10.94.1.1.3.1.7

adslAturCurrAttainableRate

Indicates the maximum currently attainable data rate
by the ATU. This value will be equal or greater than
the current line rate.

bpsSNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.2.1.10.94.1.1.3.1.8

adslAtucChanTable

table

.1.3.6.1.2.1.10.94.1.1.4 · 1 row entry · 4 columns

Open in standard view

This table provides one row for each ATUC channel.
ADSL channel interfaces are those ifEntries
where ifType is equal to adslInterleave(124)
or adslFast(125).

adslAtucChanEntry entry .1.3.6.1.2.1.10.94.1.1.4.1

An entry in the adslAtucChanTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
adslAtucChanInterleaveDelay Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input bytes at the interleaver input and their plac…	milli-secondsSNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.10.94.1.1.4.1.1`
adslAtucChanCurrTxRate Actual transmit rate on this channel.	bpsSNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.10.94.1.1.4.1.2`
adslAtucChanPrevTxRate The rate at the time of the last adslAtucRateChangeTrap event. It is also set at initialization to prevent a trap being sent. Rate changes less than adslAtucThresh()RateDown or less than adslAtucThresh(…	bpsSNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.10.94.1.1.4.1.3`
adslAtucChanCrcBlockLength Indicates the length of the channel data-block on which the CRC operates. Refer to Line Code Specific MIBs, [11] and [12] for more information.	byteSNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.10.94.1.1.4.1.4`

adslAturChanTable

table

.1.3.6.1.2.1.10.94.1.1.5 · 1 row entry · 4 columns

Open in standard view

This table provides one row for each ATUR channel.
ADSL channel interfaces are those ifEntries
where ifType is equal to adslInterleave(124)
or adslFast(125).

adslAturChanEntry entry .1.3.6.1.2.1.10.94.1.1.5.1

An entry in the adslAturChanTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
adslAturChanInterleaveDelay Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input bytes at the interleaver input and their plac…	milli-secondsSNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.10.94.1.1.5.1.1`
adslAturChanCurrTxRate Actual transmit rate on this channel.	bpsSNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.10.94.1.1.5.1.2`
adslAturChanPrevTxRate The rate at the time of the last adslAturRateChangeTrap event. It is also set at initialization to prevent a trap being sent. Rate changes less than adslAturThresh()RateDown or less than adslAturThresh()RateUp will no…	bpsSNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.10.94.1.1.5.1.3`
adslAturChanCrcBlockLength Indicates the length of the channel data-block on which the CRC operates. Refer to Line Code Specific MIBs, [11] and [12] for more information.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.10.94.1.1.5.1.4`

adslAtucPerfDataTable

table

.1.3.6.1.2.1.10.94.1.1.6 · 1 row entry · 29 columns

Open in standard view

This table provides one row for each ATUC.
ADSL physical interfaces are
those ifEntries where ifType is equal to adsl(94).

adslAtucPerfDataEntry entry .1.3.6.1.2.1.10.94.1.1.6.1

An entry in adslAtucPerfDataTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
adslAtucPerfLofs Count of the number of Loss of Framing failures since agent reset.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.10.94.1.1.6.1.1`
adslAtucPerfLoss Count of the number of Loss of Signal failures since agent reset.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.10.94.1.1.6.1.2`
adslAtucPerfLols Count of the number of Loss of Link failures since agent reset.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.10.94.1.1.6.1.3`
adslAtucPerfLprs Count of the number of Loss of Power failures since agent reset.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.10.94.1.1.6.1.4`
adslAtucPerfESs Count of the number of Errored Seconds since agent reset. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.10.94.1.1.6.1.5`
adslAtucPerfInits Count of the line initialization attempts since agent reset. Includes both successful and failed attempts.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.10.94.1.1.6.1.6`
adslAtucPerfValidIntervals The number of previous 15-minute intervals in the interval table for which data was collected. Given that <n> is the maximum # of intervals supported. The value will be <n> unless the measurement was (re-)started withi…	Integer32 Constraints: `range: 0-96`	`.1.3.6.1.2.1.10.94.1.1.6.1.7`
adslAtucPerfInvalidIntervals The number of intervals in the range from 0 to the value of adslAtucPerfValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not availab…	Integer32 Constraints: `range: 0-96`	`.1.3.6.1.2.1.10.94.1.1.6.1.8`
adslAtucPerfCurr15MinTimeElapsed Total elapsed seconds in this interval.	secondsUnsigned32 Constraints: `range: 0-899`	`.1.3.6.1.2.1.10.94.1.1.6.1.9`
adslAtucPerfCurr15MinLofs Count of seconds in the current 15 minute interval when there was Loss of Framing.	secondsPerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.6.1.10`
adslAtucPerfCurr15MinLoss Count of seconds in the current 15 minute interval when there was Loss of Signal.	secondsPerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.6.1.11`
adslAtucPerfCurr15MinLols Count of seconds in the current 15 minute interval when there was Loss of Link.	secondsPerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.6.1.12`
adslAtucPerfCurr15MinLprs Count of seconds in the current 15 minute interval when there was Loss of Power.	secondsPerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.6.1.13`
adslAtucPerfCurr15MinESs Count of Errored Seconds in the current 15 minute interval. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.	secondsPerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.6.1.14`
adslAtucPerfCurr15MinInits Count of the line initialization attempts in the current 15 minute interval. Includes both successful and failed attempts.	PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.6.1.15`
adslAtucPerfCurr1DayTimeElapsed Number of seconds that have elapsed since the beginning of the current 1-day interval.	secondsUnsigned32 Constraints: `range: 0-86399`	`.1.3.6.1.2.1.10.94.1.1.6.1.16`
adslAtucPerfCurr1DayLofs Count of the number of seconds when there was Loss of Framing during the current day as measured by adslAtucPerfCurr1DayTimeElapsed.	secondsADSL-TC-MIBAdslPerfCurrDayCount Textual Convention: ADSL-TC-MIBAdslPerfCurrDayCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.6.1.17`
adslAtucPerfCurr1DayLoss Count of the number of seconds when there was Loss of Signal during the current day as measured by adslAtucPerfCurr1DayTimeElapsed.	secondsADSL-TC-MIBAdslPerfCurrDayCount Textual Convention: ADSL-TC-MIBAdslPerfCurrDayCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.6.1.18`
adslAtucPerfCurr1DayLols Count of the number of seconds when there was Loss of Link during the current day as measured by adslAtucPerfCurr1DayTimeElapsed.	secondsADSL-TC-MIBAdslPerfCurrDayCount Textual Convention: ADSL-TC-MIBAdslPerfCurrDayCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.6.1.19`
adslAtucPerfCurr1DayLprs Count of the number of seconds when there was Loss of Power during the current day as measured by adslAtucPerfCurr1DayTimeElapsed.	secondsADSL-TC-MIBAdslPerfCurrDayCount Textual Convention: ADSL-TC-MIBAdslPerfCurrDayCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.6.1.20`
adslAtucPerfCurr1DayESs Count of Errored Seconds during the current day as measured by adslAtucPerfCurr1DayTimeElapsed. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or…	secondsADSL-TC-MIBAdslPerfCurrDayCount Textual Convention: ADSL-TC-MIBAdslPerfCurrDayCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.6.1.21`
adslAtucPerfCurr1DayInits Count of the line initialization attempts in the day as measured by adslAtucPerfCurr1DayTimeElapsed. Includes both successful and failed attempts.	ADSL-TC-MIBAdslPerfCurrDayCount Textual Convention: ADSL-TC-MIBAdslPerfCurrDayCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.6.1.22`
adslAtucPerfPrev1DayMoniSecs The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monit…	secondsInteger32 Constraints: `range: 0-86400`	`.1.3.6.1.2.1.10.94.1.1.6.1.23`
adslAtucPerfPrev1DayLofs Count of seconds in the interval when there was Loss of Framing within the most recent previous 1-day period.	secondsADSL-TC-MIBAdslPerfPrevDayCount Textual Convention: ADSL-TC-MIBAdslPerfPrevDayCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.6.1.24`
adslAtucPerfPrev1DayLoss Count of seconds in the interval when there was Loss of Signal within the most recent previous 1-day period.	secondsADSL-TC-MIBAdslPerfPrevDayCount Textual Convention: ADSL-TC-MIBAdslPerfPrevDayCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.6.1.25`
adslAtucPerfPrev1DayLols Count of seconds in the interval when there was Loss of Link within the most recent previous 1-day period.	secondsADSL-TC-MIBAdslPerfPrevDayCount Textual Convention: ADSL-TC-MIBAdslPerfPrevDayCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.6.1.26`
adslAtucPerfPrev1DayLprs Count of seconds in the interval when there was Loss of Power within the most recent previous 1-day period.	secondsADSL-TC-MIBAdslPerfPrevDayCount Textual Convention: ADSL-TC-MIBAdslPerfPrevDayCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.6.1.27`
adslAtucPerfPrev1DayESs Count of Errored Seconds within the most recent previous 1-day period. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.	secondsADSL-TC-MIBAdslPerfPrevDayCount Textual Convention: ADSL-TC-MIBAdslPerfPrevDayCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.6.1.28`
adslAtucPerfPrev1DayInits Count of the line initialization attempts in the most recent previous 1-day period. Includes both successful and failed attempts.	ADSL-TC-MIBAdslPerfPrevDayCount Textual Convention: ADSL-TC-MIBAdslPerfPrevDayCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.6.1.29`

adslAturPerfDataTable

table

.1.3.6.1.2.1.10.94.1.1.7 · 1 row entry · 21 columns

Open in standard view

This table provides one row for each ATUR.
ADSL physical interfaces are
those ifEntries where ifType is equal to adsl(94).

adslAturPerfDataEntry entry .1.3.6.1.2.1.10.94.1.1.7.1

An entry in adslAturPerfDataTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
adslAturPerfLofs Count of the number of Loss of Framing failures since agent reset.	secondsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.10.94.1.1.7.1.1`
adslAturPerfLoss Count of the number of Loss of Signal failures since agent reset.	secondsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.10.94.1.1.7.1.2`
adslAturPerfLprs Count of the number of Loss of Power failures since agent reset.	secondsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.10.94.1.1.7.1.3`
adslAturPerfESs Count of the number of Errored Seconds since agent reset. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.	secondsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.10.94.1.1.7.1.4`
adslAturPerfValidIntervals The number of previous 15-minute intervals in the interval table for which data was collected. Given that <n> is the maximum # of intervals supported. The value will be <n> unless the measurement was (re-)started withi…	Integer32 Constraints: `range: 0-96`	`.1.3.6.1.2.1.10.94.1.1.7.1.5`
adslAturPerfInvalidIntervals The number of intervals in the range from 0 to the value of adslAturPerfValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not availab…	Integer32 Constraints: `range: 0-96`	`.1.3.6.1.2.1.10.94.1.1.7.1.6`
adslAturPerfCurr15MinTimeElapsed Total elapsed seconds in this interval.	secondsUnsigned32 Constraints: `range: 0-899`	`.1.3.6.1.2.1.10.94.1.1.7.1.7`
adslAturPerfCurr15MinLofs Count of seconds in the current 15 minute interval when there was Loss of Framing.	secondsPerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.7.1.8`
adslAturPerfCurr15MinLoss Count of seconds in the current 15 minute interval when there was Loss of Signal.	secondsPerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.7.1.9`
adslAturPerfCurr15MinLprs Count of seconds in the current 15 minute interval when there was Loss of Power.	secondsPerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.7.1.10`
adslAturPerfCurr15MinESs Count of Errored Seconds in the current 15 minute interval. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.	secondsPerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.7.1.11`
adslAturPerfCurr1DayTimeElapsed Number of seconds that have elapsed since the beginning of the current 1-day interval.	secondsUnsigned32 Constraints: `range: 0-86399`	`.1.3.6.1.2.1.10.94.1.1.7.1.12`
adslAturPerfCurr1DayLofs Count of the number of seconds when there was Loss of Framing during the current day as measured by adslAturPerfCurr1DayTimeElapsed.	secondsADSL-TC-MIBAdslPerfCurrDayCount Textual Convention: ADSL-TC-MIBAdslPerfCurrDayCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.7.1.13`
adslAturPerfCurr1DayLoss Count of the number of seconds when there was Loss of Signal during the current day as measured by adslAturPerfCurr1DayTimeElapsed.	secondsADSL-TC-MIBAdslPerfCurrDayCount Textual Convention: ADSL-TC-MIBAdslPerfCurrDayCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.7.1.14`
adslAturPerfCurr1DayLprs Count of the number of seconds when there was Loss of Power during the current day as measured by adslAturPerfCurr1DayTimeElapsed.	secondsADSL-TC-MIBAdslPerfCurrDayCount Textual Convention: ADSL-TC-MIBAdslPerfCurrDayCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.7.1.15`
adslAturPerfCurr1DayESs Count of Errored Seconds during the current day as measured by adslAturPerfCurr1DayTimeElapsed. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or…	secondsADSL-TC-MIBAdslPerfCurrDayCount Textual Convention: ADSL-TC-MIBAdslPerfCurrDayCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.7.1.16`
adslAturPerfPrev1DayMoniSecs The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monit…	secondsInteger32 Constraints: `range: 0-86400`	`.1.3.6.1.2.1.10.94.1.1.7.1.17`
adslAturPerfPrev1DayLofs Count of seconds in the interval when there was Loss of Framing within the most recent previous 1-day period.	secondsADSL-TC-MIBAdslPerfPrevDayCount Textual Convention: ADSL-TC-MIBAdslPerfPrevDayCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.7.1.18`
adslAturPerfPrev1DayLoss Count of seconds in the interval when there was Loss of Signal within the most recent previous 1-day period.	secondsADSL-TC-MIBAdslPerfPrevDayCount Textual Convention: ADSL-TC-MIBAdslPerfPrevDayCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.7.1.19`
adslAturPerfPrev1DayLprs Count of seconds in the interval when there was Loss of Power within the most recent previous 1-day period.	secondsADSL-TC-MIBAdslPerfPrevDayCount Textual Convention: ADSL-TC-MIBAdslPerfPrevDayCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.7.1.20`
adslAturPerfPrev1DayESs Count of Errored Seconds within the most recent previous 1-day period. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.	secondsADSL-TC-MIBAdslPerfPrevDayCount Textual Convention: ADSL-TC-MIBAdslPerfPrevDayCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.7.1.21`

adslAtucIntervalTable

table

.1.3.6.1.2.1.10.94.1.1.8 · 1 row entry · 8 columns

Open in standard view

This table provides one row for each ATUC
performance data collection interval.
ADSL physical interfaces are
          
those ifEntries where ifType is equal to adsl(94).

adslAtucIntervalEntry entry .1.3.6.1.2.1.10.94.1.1.8.1

An entry in the adslAtucIntervalTable.

Indexes

IF-MIBifIndex adslAtucIntervalNumber

Column Syntax OID

adslAtucIntervalNumber

Performance Data Interval number 1 is the
the most recent previous interval; interval
96 is 24 hours ago. Intervals 2..96 are
optional.

Integer32

Constraints:
range: 1-96

.1.3.6.1.2.1.10.94.1.1.8.1.1

adslAtucIntervalLofs

Count of seconds in the interval when there was Loss
of Framing.

secondsPerfHist-TC-MIBPerfIntervalCount

Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32

.1.3.6.1.2.1.10.94.1.1.8.1.2

adslAtucIntervalLoss

Count of seconds in the interval when there was Loss
of Signal.

secondsPerfHist-TC-MIBPerfIntervalCount

Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32

.1.3.6.1.2.1.10.94.1.1.8.1.3

adslAtucIntervalLols

Count of seconds in the interval when there was Loss
of Link.

secondsPerfHist-TC-MIBPerfIntervalCount

Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32

.1.3.6.1.2.1.10.94.1.1.8.1.4

adslAtucIntervalLprs

Count of seconds in the interval when there was Loss
of Power.

secondsPerfHist-TC-MIBPerfIntervalCount

Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32

.1.3.6.1.2.1.10.94.1.1.8.1.5

adslAtucIntervalESs

Count of Errored Seconds in the interval.
The errored second parameter is a count of
one-second intervals containing one or more crc
anomalies, or one or more los or sef defects.

secondsPerfHist-TC-MIBPerfIntervalCount

Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32

.1.3.6.1.2.1.10.94.1.1.8.1.6

adslAtucIntervalInits

Count of the line initialization attempts
during the interval. Includes both successful
and failed attempts.

PerfHist-TC-MIBPerfIntervalCount

Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32

.1.3.6.1.2.1.10.94.1.1.8.1.7

adslAtucIntervalValidData

This variable indicates if the data for this
interval is valid.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.2.1.10.94.1.1.8.1.8

adslAturIntervalTable

table

.1.3.6.1.2.1.10.94.1.1.9 · 1 row entry · 6 columns

Open in standard view

This table provides one row for each ATUR
performance data collection interval.
ADSL physical interfaces are those
ifEntries where ifType is equal to adsl(94).

adslAturIntervalEntry entry .1.3.6.1.2.1.10.94.1.1.9.1

An entry in the adslAturIntervalTable.

Indexes

IF-MIBifIndex adslAturIntervalNumber

Column Syntax OID

adslAturIntervalNumber

Performance Data Interval number 1 is the
the most recent previous interval; interval
96 is 24 hours ago. Intervals 2..96 are
optional.

Integer32

Constraints:
range: 1-96

.1.3.6.1.2.1.10.94.1.1.9.1.1

adslAturIntervalLofs

Count of seconds in the interval when there was
Loss of Framing.

secondsPerfHist-TC-MIBPerfIntervalCount

Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32

.1.3.6.1.2.1.10.94.1.1.9.1.2

adslAturIntervalLoss

Count of seconds in the interval when there was
Loss of Signal.

secondsPerfHist-TC-MIBPerfIntervalCount

Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32

.1.3.6.1.2.1.10.94.1.1.9.1.3

adslAturIntervalLprs

Count of seconds in the interval when there was
Loss of Power.

secondsPerfHist-TC-MIBPerfIntervalCount

Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32

.1.3.6.1.2.1.10.94.1.1.9.1.4

adslAturIntervalESs

Count of Errored Seconds in the interval.
The errored second parameter is a count of
one-second intervals containing one or more crc
anomalies, or one or more los or sef defects.

secondsPerfHist-TC-MIBPerfIntervalCount

Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32

.1.3.6.1.2.1.10.94.1.1.9.1.5

adslAturIntervalValidData

This variable indicates if the data for this

interval is valid.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.2.1.10.94.1.1.9.1.6

adslAtucChanPerfDataTable

table

.1.3.6.1.2.1.10.94.1.1.10 · 1 row entry · 21 columns

Open in standard view

This table provides one row for each ATUC channel.
ADSL channel interfaces are those ifEntries
where ifType is equal to adslInterleave(124)
or adslFast(125).

adslAtucChanPerfDataEntry entry .1.3.6.1.2.1.10.94.1.1.10.1

An entry in adslAtucChanPerfDataTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
adslAtucChanReceivedBlks Count of all encoded blocks received on this channel since agent reset.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.10.94.1.1.10.1.1`
adslAtucChanTransmittedBlks Count of all encoded blocks transmitted on this channel since agent reset.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.10.94.1.1.10.1.2`
adslAtucChanCorrectedBlks Count of all blocks received with errors that were corrected since agent reset. These blocks are passed on as good data.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.10.94.1.1.10.1.3`
adslAtucChanUncorrectBlks Count of all blocks received with uncorrectable errors since agent reset.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.10.94.1.1.10.1.4`
adslAtucChanPerfValidIntervals The number of previous 15-minute intervals in the interval table for which data was collected. Given that <n> is the maximum # of intervals supported. The value will be <n> unless the measurement was (re-)started withi…	Integer32 Constraints: `range: 0-96`	`.1.3.6.1.2.1.10.94.1.1.10.1.5`
adslAtucChanPerfInvalidIntervals The number of intervals in the range from 0 to the value of adslAtucChanPerfValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not ava…	Integer32 Constraints: `range: 0-96`	`.1.3.6.1.2.1.10.94.1.1.10.1.6`
adslAtucChanPerfCurr15MinTimeElapsed Total elapsed seconds in this interval.	secondsUnsigned32 Constraints: `range: 0-899`	`.1.3.6.1.2.1.10.94.1.1.10.1.7`
adslAtucChanPerfCurr15MinReceivedBlks Count of all encoded blocks received on this channel within the current 15 minute interval.	PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.10.1.8`
adslAtucChanPerfCurr15MinTransmittedBlks Count of all encoded blocks transmitted on this channel within the current 15 minute interval.	PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.10.1.9`
adslAtucChanPerfCurr15MinCorrectedBlks Count of all blocks received with errors that were corrected on this channel within the current 15 minute interval.	PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.10.1.10`
adslAtucChanPerfCurr15MinUncorrectBlks Count of all blocks received with uncorrectable errors on this channel within the current 15 minute interval.	PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.10.1.11`
adslAtucChanPerfCurr1DayTimeElapsed Number of seconds that have elapsed since the beginning of the current 1-day interval.	secondsUnsigned32 Constraints: `range: 0-86399`	`.1.3.6.1.2.1.10.94.1.1.10.1.12`
adslAtucChanPerfCurr1DayReceivedBlks Count of all encoded blocks received on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed.	ADSL-TC-MIBAdslPerfCurrDayCount Textual Convention: ADSL-TC-MIBAdslPerfCurrDayCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.10.1.13`
adslAtucChanPerfCurr1DayTransmittedBlks Count of all encoded blocks transmitted on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed.	ADSL-TC-MIBAdslPerfCurrDayCount Textual Convention: ADSL-TC-MIBAdslPerfCurrDayCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.10.1.14`
adslAtucChanPerfCurr1DayCorrectedBlks Count of all blocks received with errors that were corrected on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed.	ADSL-TC-MIBAdslPerfCurrDayCount Textual Convention: ADSL-TC-MIBAdslPerfCurrDayCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.10.1.15`
adslAtucChanPerfCurr1DayUncorrectBlks Count of all blocks received with uncorrectable errors on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed.	ADSL-TC-MIBAdslPerfCurrDayCount Textual Convention: ADSL-TC-MIBAdslPerfCurrDayCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.10.1.16`
adslAtucChanPerfPrev1DayMoniSecs The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monit…	secondsInteger32 Constraints: `range: 0-86400`	`.1.3.6.1.2.1.10.94.1.1.10.1.17`
adslAtucChanPerfPrev1DayReceivedBlks Count of all encoded blocks received on this channel within the most recent previous 1-day period.	ADSL-TC-MIBAdslPerfPrevDayCount Textual Convention: ADSL-TC-MIBAdslPerfPrevDayCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.10.1.18`
adslAtucChanPerfPrev1DayTransmittedBlks Count of all encoded blocks transmitted on this channel within the most recent previous 1-day period.	ADSL-TC-MIBAdslPerfPrevDayCount Textual Convention: ADSL-TC-MIBAdslPerfPrevDayCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.10.1.19`
adslAtucChanPerfPrev1DayCorrectedBlks Count of all blocks received with errors that were corrected on this channel within the most recent previous 1-day period.	ADSL-TC-MIBAdslPerfPrevDayCount Textual Convention: ADSL-TC-MIBAdslPerfPrevDayCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.10.1.20`
adslAtucChanPerfPrev1DayUncorrectBlks Count of all blocks received with uncorrectable errors on this channel within the most recent previous 1-day period.	ADSL-TC-MIBAdslPerfPrevDayCount Textual Convention: ADSL-TC-MIBAdslPerfPrevDayCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.10.1.21`

adslAturChanPerfDataTable

table

.1.3.6.1.2.1.10.94.1.1.11 · 1 row entry · 21 columns

Open in standard view

This table provides one row for each ATUR channel.
ADSL channel interfaces are those ifEntries
where ifType is equal to adslInterleave(124)
or adslFast(125).

adslAturChanPerfDataEntry entry .1.3.6.1.2.1.10.94.1.1.11.1

An entry in adslAturChanPerfDataTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
adslAturChanReceivedBlks Count of all encoded blocks received on this channel since agent reset.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.10.94.1.1.11.1.1`
adslAturChanTransmittedBlks Count of all encoded blocks transmitted on this channel since agent reset.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.10.94.1.1.11.1.2`
adslAturChanCorrectedBlks Count of all blocks received with errors that were corrected since agent reset. These blocks are passed on as good data.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.10.94.1.1.11.1.3`
adslAturChanUncorrectBlks Count of all blocks received with uncorrectable errors since agent reset.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.2.1.10.94.1.1.11.1.4`
adslAturChanPerfValidIntervals The number of previous 15-minute intervals in the interval table for which data was collected. Given that <n> is the maximum # of intervals supported. The value will be <n> unless the measurement was (re-)started withi…	Integer32 Constraints: `range: 0-96`	`.1.3.6.1.2.1.10.94.1.1.11.1.5`
adslAturChanPerfInvalidIntervals The number of intervals in the range from 0 to the value of adslAturChanPerfValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not ava…	Integer32 Constraints: `range: 0-96`	`.1.3.6.1.2.1.10.94.1.1.11.1.6`
adslAturChanPerfCurr15MinTimeElapsed Total elapsed seconds in this interval. A full interval is 900 seconds.	secondsUnsigned32 Constraints: `range: 0-899`	`.1.3.6.1.2.1.10.94.1.1.11.1.7`
adslAturChanPerfCurr15MinReceivedBlks Count of all encoded blocks received on this channel within the current 15 minute interval.	PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.11.1.8`
adslAturChanPerfCurr15MinTransmittedBlks Count of all encoded blocks transmitted on this channel within the current 15 minute interval.	PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.11.1.9`
adslAturChanPerfCurr15MinCorrectedBlks Count of all blocks received with errors that were corrected on this channel within the current 15 minute interval.	PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.11.1.10`
adslAturChanPerfCurr15MinUncorrectBlks Count of all blocks received with uncorrectable errors on this channel within the current 15 minute interval.	PerfHist-TC-MIBPerfCurrentCount Textual Convention: PerfHist-TC-MIBPerfCurrentCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.11.1.11`
adslAturChanPerfCurr1DayTimeElapsed Number of seconds that have elapsed since the beginning of the current 1-day interval.	secondsUnsigned32 Constraints: `range: 0-86399`	`.1.3.6.1.2.1.10.94.1.1.11.1.12`
adslAturChanPerfCurr1DayReceivedBlks Count of all encoded blocks received on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed.	ADSL-TC-MIBAdslPerfCurrDayCount Textual Convention: ADSL-TC-MIBAdslPerfCurrDayCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.11.1.13`
adslAturChanPerfCurr1DayTransmittedBlks Count of all encoded blocks transmitted on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed.	ADSL-TC-MIBAdslPerfCurrDayCount Textual Convention: ADSL-TC-MIBAdslPerfCurrDayCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.11.1.14`
adslAturChanPerfCurr1DayCorrectedBlks Count of all blocks received with errors that were corrected on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed.	ADSL-TC-MIBAdslPerfCurrDayCount Textual Convention: ADSL-TC-MIBAdslPerfCurrDayCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.11.1.15`
adslAturChanPerfCurr1DayUncorrectBlks Count of all blocks received with uncorrectable errors on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed.	ADSL-TC-MIBAdslPerfCurrDayCount Textual Convention: ADSL-TC-MIBAdslPerfCurrDayCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.11.1.16`
adslAturChanPerfPrev1DayMoniSecs The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monit…	secondsInteger32 Constraints: `range: 0-86400`	`.1.3.6.1.2.1.10.94.1.1.11.1.17`
adslAturChanPerfPrev1DayReceivedBlks Count of all encoded blocks received on this channel within the most recent previous 1-day period.	ADSL-TC-MIBAdslPerfPrevDayCount Textual Convention: ADSL-TC-MIBAdslPerfPrevDayCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.11.1.18`
adslAturChanPerfPrev1DayTransmittedBlks Count of all encoded blocks transmitted on this channel within the most recent previous 1-day period.	ADSL-TC-MIBAdslPerfPrevDayCount Textual Convention: ADSL-TC-MIBAdslPerfPrevDayCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.11.1.19`
adslAturChanPerfPrev1DayCorrectedBlks Count of all blocks received with errors that were corrected on this channel within the most recent previous 1-day period.	ADSL-TC-MIBAdslPerfPrevDayCount Textual Convention: ADSL-TC-MIBAdslPerfPrevDayCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.11.1.20`
adslAturChanPerfPrev1DayUncorrectBlks Count of all blocks received with uncorrectable errors on this channel within the most recent previous 1-day period.	ADSL-TC-MIBAdslPerfPrevDayCount Textual Convention: ADSL-TC-MIBAdslPerfPrevDayCount `Unsigned32`	`.1.3.6.1.2.1.10.94.1.1.11.1.21`

adslAtucChanIntervalTable

table

.1.3.6.1.2.1.10.94.1.1.12 · 1 row entry · 6 columns

Open in standard view

This table provides one row for each ATUC channel's
performance data collection interval.
ADSL channel interfaces are those ifEntries
where ifType is equal to adslInterleave(124)
or adslFast(125).

adslAtucChanIntervalEntry entry .1.3.6.1.2.1.10.94.1.1.12.1

An entry in the adslAtucIntervalTable.

Indexes

IF-MIBifIndex adslAtucChanIntervalNumber

Column Syntax OID

adslAtucChanIntervalNumber

Performance Data Interval number 1 is the
the most recent previous interval; interval
96 is 24 hours ago. Intervals 2..96 are
optional.

Integer32

Constraints:
range: 1-96

.1.3.6.1.2.1.10.94.1.1.12.1.1

adslAtucChanIntervalReceivedBlks

Count of all encoded blocks received on this channel
during this interval.

PerfHist-TC-MIBPerfIntervalCount

Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32

.1.3.6.1.2.1.10.94.1.1.12.1.2

adslAtucChanIntervalTransmittedBlks

Count of all encoded blocks transmitted on this
channel during this interval.

PerfHist-TC-MIBPerfIntervalCount

Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32

.1.3.6.1.2.1.10.94.1.1.12.1.3

adslAtucChanIntervalCorrectedBlks

Count of all blocks received with errors that were
corrected on this channel during this interval.

PerfHist-TC-MIBPerfIntervalCount

Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32

.1.3.6.1.2.1.10.94.1.1.12.1.4

adslAtucChanIntervalUncorrectBlks

Count of all blocks received with uncorrectable
errors on this channel during this interval.

PerfHist-TC-MIBPerfIntervalCount

Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32

.1.3.6.1.2.1.10.94.1.1.12.1.5

adslAtucChanIntervalValidData

This variable indicates if the data for this
interval is valid.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.2.1.10.94.1.1.12.1.6

adslAturChanIntervalTable

table

.1.3.6.1.2.1.10.94.1.1.13 · 1 row entry · 6 columns

Open in standard view

This table provides one row for each ATUR channel's
performance data collection interval.
ADSL channel interfaces are those ifEntries
where ifType is equal to adslInterleave(124)
or adslFast(125).

adslAturChanIntervalEntry entry .1.3.6.1.2.1.10.94.1.1.13.1

An entry in the adslAturIntervalTable.

Indexes

IF-MIBifIndex adslAturChanIntervalNumber

Column Syntax OID

adslAturChanIntervalNumber

Performance Data Interval number 1 is the
the most recent previous interval; interval
96 is 24 hours ago. Intervals 2..96 are
optional.

Integer32

Constraints:
range: 1-96

.1.3.6.1.2.1.10.94.1.1.13.1.1

adslAturChanIntervalReceivedBlks

Count of all encoded blocks received on this channel
during this interval.

PerfHist-TC-MIBPerfIntervalCount

Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32

.1.3.6.1.2.1.10.94.1.1.13.1.2

adslAturChanIntervalTransmittedBlks

Count of all encoded blocks transmitted on this
channel during this interval.

PerfHist-TC-MIBPerfIntervalCount

Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32

.1.3.6.1.2.1.10.94.1.1.13.1.3

adslAturChanIntervalCorrectedBlks

Count of all blocks received with errors that were
corrected on this channel during this interval.

PerfHist-TC-MIBPerfIntervalCount

Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32

.1.3.6.1.2.1.10.94.1.1.13.1.4

adslAturChanIntervalUncorrectBlks

Count of all blocks received with uncorrectable
errors on this channel during this interval.

PerfHist-TC-MIBPerfIntervalCount

Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32

.1.3.6.1.2.1.10.94.1.1.13.1.5

adslAturChanIntervalValidData

This variable indicates if the data for this
interval is valid.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.2.1.10.94.1.1.13.1.6

adslLineConfProfileTable

table

.1.3.6.1.2.1.10.94.1.1.14 · 1 row entry · 30 columns

Open in standard view

This table contains information on the ADSL line
configuration.  One entry in this table reflects a
profile defined by a manager which can be used to
configure the ADSL line.

adslLineConfProfileEntry entry .1.3.6.1.2.1.10.94.1.1.14.1

Each entry consists of a list of parameters that
represents the configuration of an ADSL modem.

When `dynamic' profiles are implemented, a default
profile will always exist. This profile's name will
be set…

Indexes

adslLineConfProfileName

Column Syntax OID

adslLineConfProfileName

This object is used by the line configuration table
in order to identify a row of this table.

When `dynamic' profiles are implemented, the profile
name is user specified. Also, the system will always
pro…

OctetString

Constraints:
range: 1-32

.1.3.6.1.2.1.10.94.1.1.14.1.1

adslAtucConfRateMode

Defines what form of transmit rate adaptation is
configured on this modem. See ADSL Forum TR-005 [3]
for more information.

Enumerationr/w

Enumerated Values:

1	fixed
2	adaptAtStartup
3	adaptAtRuntime

.1.3.6.1.2.1.10.94.1.1.14.1.2

adslAtucConfRateChanRatio

Configured allocation ratio of excess transmit
bandwidth between fast and interleaved channels. Only
applies when two channel mode and RADSL are supported.
Distribute bandwidth on each channel in excess of the
correspo…

%Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.2.1.10.94.1.1.14.1.3

adslAtucConfTargetSnrMgn

Configured Target Signal/Noise Margin.
This is the Noise Margin the modem must achieve
with a BER of 10-7 or better to successfully complete
initialization.

tenth dBInteger32r/w

Constraints:
range: 0-310

.1.3.6.1.2.1.10.94.1.1.14.1.4

adslAtucConfMaxSnrMgn

Configured Maximum acceptable Signal/Noise Margin.
If the Noise Margin is above this the modem should
attempt to reduce its power output to optimize its
operation.

tenth dBInteger32r/w

Constraints:
range: 0-310

.1.3.6.1.2.1.10.94.1.1.14.1.5

adslAtucConfMinSnrMgn

Configured Minimum acceptable Signal/Noise Margin.
If the noise margin falls below this level, the modem
should attempt to increase its power output. If that
is not possible the modem will attempt to
re-initialize or s…

tenth dBInteger32r/w

Constraints:
range: 0-310

.1.3.6.1.2.1.10.94.1.1.14.1.6

adslAtucConfDownshiftSnrMgn

Configured Signal/Noise Margin for rate downshift.
If the noise margin falls below this level, the modem
should attempt to decrease its transmit rate. In
the case that RADSL mode is not present,
the value will be `0'.

tenth dBInteger32r/w

Constraints:
range: 0-310

.1.3.6.1.2.1.10.94.1.1.14.1.7

adslAtucConfUpshiftSnrMgn

Configured Signal/Noise Margin for rate upshift.
If the noise margin rises above this level, the modem
should attempt to increase its transmit rate. In
the case that RADSL is not present, the value will
…

tenth dBInteger32r/w

Constraints:
range: 0-310

.1.3.6.1.2.1.10.94.1.1.14.1.8

adslAtucConfMinUpshiftTime

Minimum time that the current margin is above
UpshiftSnrMgn before an upshift occurs.
In the case that RADSL is not present, the value will
be `0'.

secondsInteger32r/w

Constraints:
range: 0-16383

.1.3.6.1.2.1.10.94.1.1.14.1.9

adslAtucConfMinDownshiftTime

Minimum time that the current margin is below
DownshiftSnrMgn before a downshift occurs.
In the case that RADSL mode is not present,
the value will be `0'.

secondsInteger32r/w

Constraints:
range: 0-16383

.1.3.6.1.2.1.10.94.1.1.14.1.10

adslAtucChanConfFastMinTxRate

Configured Minimum Transmit rate for `Fast' channels,
in bps. See adslAtucConfRateChanRatio for information
regarding RADSL mode and ATUR transmit rate for
ATUC receive rates.

bpsSNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.2.1.10.94.1.1.14.1.11

adslAtucChanConfInterleaveMinTxRate

Configured Minimum Transmit rate for `Interleave'
channels, in bps. See adslAtucConfRateChanRatio for
information regarding RADSL mode and see
ATUR transmit rate for receive rates.

bpsSNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.2.1.10.94.1.1.14.1.12

adslAtucChanConfFastMaxTxRate

Configured Maximum Transmit rate for `Fast' channels,
in bps. See adslAtucConfRateChanRatio for information
regarding RADSL mode and see ATUR transmit rate for
ATUC receive rates.

bpsSNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.2.1.10.94.1.1.14.1.13

adslAtucChanConfInterleaveMaxTxRate

Configured Maximum Transmit rate for `Interleave'
channels, in bps. See adslAtucConfRateChanRatio for
information regarding RADSL mode and ATUR transmit
rate for ATUC receive rates.

bpsSNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.2.1.10.94.1.1.14.1.14

adslAtucChanConfMaxInterleaveDelay

Configured maximum Interleave Delay for this channel.

Interleave delay applies only to the interleave channel
and defines the mapping (relative spacing) between
subsequent input bytes at the interleaver i…

milli-secondsInteger32r/w

Constraints:
range: 0-255

.1.3.6.1.2.1.10.94.1.1.14.1.15

adslAturConfRateMode

Defines what form of transmit rate adaptation is
configured on this modem. See ADSL Forum TR-005 [3]
for more information.

Enumerationr/w

Enumerated Values:

1	fixed
2	adaptAtStartup
3	adaptAtRuntime

.1.3.6.1.2.1.10.94.1.1.14.1.16

adslAturConfRateChanRatio

%Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.2.1.10.94.1.1.14.1.17

adslAturConfTargetSnrMgn

Configured Target Signal/Noise Margin.
This is the Noise Margin the modem must achieve
with a BER of 10-7 or better to successfully complete
initialization.

tenth dBInteger32r/w

Constraints:
range: 0-310

.1.3.6.1.2.1.10.94.1.1.14.1.18

adslAturConfMaxSnrMgn

Configured Maximum acceptable Signal/Noise Margin.
If the Noise Margin is above this the modem should
attempt to reduce its power output to optimize its
operation.

tenth dBInteger32r/w

Constraints:
range: 0-310

.1.3.6.1.2.1.10.94.1.1.14.1.19

adslAturConfMinSnrMgn

tenth dBInteger32r/w

Constraints:
range: 0-310

.1.3.6.1.2.1.10.94.1.1.14.1.20

adslAturConfDownshiftSnrMgn

Configured Signal/Noise Margin for rate downshift.
If the noise margin falls below this level, the modem
should attempt to decrease its transmit rate.
In the case that RADSL mode is not present,
the value will be `0'.

tenth dBInteger32r/w

Constraints:
range: 0-310

.1.3.6.1.2.1.10.94.1.1.14.1.21

adslAturConfUpshiftSnrMgn

Configured Signal/Noise Margin for rate upshift.
If the noise margin rises above this level, the modem
should attempt to increase its transmit rate.
In the case that RADSL is not present,
the value will be `0'.

tenth dBInteger32r/w

Constraints:
range: 0-310

.1.3.6.1.2.1.10.94.1.1.14.1.22

adslAturConfMinUpshiftTime

Minimum time that the current margin is above
UpshiftSnrMgn before an upshift occurs.
In the case that RADSL is not present, the value will
be `0'.

secondsInteger32r/w

Constraints:
range: 0-16383

.1.3.6.1.2.1.10.94.1.1.14.1.23

adslAturConfMinDownshiftTime

Minimum time that the current margin is below
DownshiftSnrMgn before a downshift occurs.
In the case that RADSL mode is not present,
the value will be `0'.

secondsInteger32r/w

Constraints:
range: 0-16383

.1.3.6.1.2.1.10.94.1.1.14.1.24

adslAturChanConfFastMinTxRate

Configured Minimum Transmit rate for `Fast' channels,
in bps. See adslAturConfRateChanRatio for information
regarding RADSL mode and ATUC transmit rate
for ATUR receive rates.

bpsSNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.2.1.10.94.1.1.14.1.25

adslAturChanConfInterleaveMinTxRate

Configured Minimum Transmit rate for `Interleave'
channels, in bps. See adslAturConfRateChanRatio for
information regarding RADSL mode and ATUC transmit rate
for ATUR receive rates.

bpsSNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.2.1.10.94.1.1.14.1.26

adslAturChanConfFastMaxTxRate

Configured Maximum Transmit rate for `Fast' channels,
in bps. See adslAturConfRateChanRatio for information
regarding RADSL mode and ATUC transmit rate
for ATUR receive rates.

bpsSNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.2.1.10.94.1.1.14.1.27

adslAturChanConfInterleaveMaxTxRate

Configured Maximum Transmit rate for `Interleave'
channels, in bps. See adslAturConfRateChanRatio for
information regarding RADSL mode and see
ATUC transmit rate for ATUR receive rates.

bpsSNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.2.1.10.94.1.1.14.1.28

adslAturChanConfMaxInterleaveDelay

milli-secondsInteger32r/w

Constraints:
range: 0-255

.1.3.6.1.2.1.10.94.1.1.14.1.29

adslLineConfProfileRowStatus

This object is used to create a new row or modify or
delete an existing row in this table.

A profile activated by setting this object to
`active'. When `active' is set, the system
will validate the profi…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.2.1.10.94.1.1.14.1.30

adslLineAlarmConfProfileTable

table

.1.3.6.1.2.1.10.94.1.1.15 · 1 row entry · 20 columns

Open in standard view

This table contains information on the ADSL line
configuration.  One entry in this table reflects a
profile defined by a manager which can be used to
configure the modem for a physical line

adslLineAlarmConfProfileEntry entry .1.3.6.1.2.1.10.94.1.1.15.1

Indexes

adslLineAlarmConfProfileName

Column Syntax OID

adslLineAlarmConfProfileName

This object is used by the line alarm configuration
table in order to identify a row of this table.

When `dynamic' profiles are implemented, the profile
name is user specified. Also, the system will alwa…

OctetString

Constraints:
range: 1-32

.1.3.6.1.2.1.10.94.1.1.15.1.1

adslAtucThresh15MinLofs

The number of Loss of Frame Seconds
encountered by an ADSL interface within any given 15
minutes performance data collection period, which
causes the SNMP agent to send an
adslAtucPerfLofsThreshTrap.
One trap will be se…

secondsInteger32r/w

Constraints:
range: 0-900

.1.3.6.1.2.1.10.94.1.1.15.1.2

adslAtucThresh15MinLoss

The number of Loss of Signal Seconds
encountered by an ADSL interface within any given 15
minutes performance data collection period, which
causes the SNMP agent to send an
adslAtucPerfLossThreshTrap.
One trap will be s…

secondsInteger32r/w

Constraints:
range: 0-900

.1.3.6.1.2.1.10.94.1.1.15.1.3

adslAtucThresh15MinLols

The number of Loss of Link Seconds
encountered by an ADSL interface within any given 15
minutes performance data collection period, which
causes the SNMP agent to send an
adslAtucPerfLolsThreshTrap.
One trap will be sen…

secondsInteger32r/w

Constraints:
range: 0-900

.1.3.6.1.2.1.10.94.1.1.15.1.4

adslAtucThresh15MinLprs

The number of Loss of Power Seconds
encountered by an ADSL interface within any given 15
minutes performance data collection period, which
causes the SNMP agent to send an
adslAtucPerfLprsThreshTrap.
One trap will be se…

secondsInteger32r/w

Constraints:
range: 0-900

.1.3.6.1.2.1.10.94.1.1.15.1.5

adslAtucThresh15MinESs

The number of Errored Seconds
encountered by an ADSL interface within any given 15
minutes performance data collection period, which
causes the SNMP agent to send an
adslAtucPerfESsThreshTrap.
One trap will be sent per …

secondsInteger32r/w

Constraints:
range: 0-900

.1.3.6.1.2.1.10.94.1.1.15.1.6

adslAtucThreshFastRateUp

Applies to `Fast' channels only.
Configured change in rate causing an
adslAtucRateChangeTrap. A trap is produced when:
ChanCurrTxRate >= ChanPrevTxRate plus the value of
this object. A value of `0' will disable the trap.

bpsSNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.2.1.10.94.1.1.15.1.7

adslAtucThreshInterleaveRateUp

Applies to `Interleave' channels only.
Configured change in rate causing an

adslAtucRateChangeTrap. A trap is produced when:
ChanCurrTxRate >= ChanPrevTxRate plus the value of
this object. A value of `0'…

bpsSNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.2.1.10.94.1.1.15.1.8

adslAtucThreshFastRateDown

Applies to `Fast' channels only.
Configured change in rate causing an
adslAtucRateChangeTrap. A trap is produced when:
ChanCurrTxRate <= ChanPrevTxRate minus the value of
this object. A value of `0' will disable the tr…

bpsSNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.2.1.10.94.1.1.15.1.9

adslAtucThreshInterleaveRateDown

Applies to `Interleave' channels only.
Configured change in rate causing an
adslAtucRateChangeTrap. A trap is produced when:
ChanCurrTxRate <= ChanPrevTxRate minus the value of
this object. A value of `0' will disable …

bpsSNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.2.1.10.94.1.1.15.1.10

adslAtucInitFailureTrapEnable

Enables and disables the InitFailureTrap. This
object is defaulted disable(2).

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.2.1.10.94.1.1.15.1.11

adslAturThresh15MinLofs

secondsInteger32r/w

Constraints:
range: 0-900

.1.3.6.1.2.1.10.94.1.1.15.1.12

adslAturThresh15MinLoss

secondsInteger32r/w

Constraints:
range: 0-900

.1.3.6.1.2.1.10.94.1.1.15.1.13

adslAturThresh15MinLprs

secondsInteger32r/w

Constraints:
range: 0-900

.1.3.6.1.2.1.10.94.1.1.15.1.14

adslAturThresh15MinESs

The number of Errored Seconds

encountered by an ADSL interface within any given 15
minutes performance data collection period, which
causes the SNMP agent to send an
adslAturPerfESsThreshTrap.
One trap wi…

secondsInteger32r/w

Constraints:
range: 0-900

.1.3.6.1.2.1.10.94.1.1.15.1.15

adslAturThreshFastRateUp

Applies to `Fast' channels only.
Configured change in rate causing an
adslAturRateChangeTrap. A trap is produced when:
ChanCurrTxRate >= ChanPrevTxRate plus the value of
this object. A value of `0' will disable the tra…

bpsSNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.2.1.10.94.1.1.15.1.16

adslAturThreshInterleaveRateUp

Applies to `Interleave' channels only.
configured change in rate causing an
adslAturRateChangeTrap. A trap is produced when:
ChanCurrTxRate >= ChanPrevTxRate plus the value of
this object. A value of `0' will disable t…

bpsSNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.2.1.10.94.1.1.15.1.17

adslAturThreshFastRateDown

Applies to `Fast' channels only.
Configured change in rate causing an
adslAturRateChangeTrap. A trap is produced when:
ChanCurrTxRate <= ChanPrevTxRate minus the value of
this object. A value of `0' will disable the tr…

bpsSNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.2.1.10.94.1.1.15.1.18

adslAturThreshInterleaveRateDown

Applies to `Interleave' channels only.
Configured change in rate causing an
adslAturRateChangeTrap. A trap is produced when:
ChanCurrTxRate <= ChanPrevTxRate minus the value of
this object. A value of `0' will disable …

bpsSNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.2.1.10.94.1.1.15.1.19

adslLineAlarmConfProfileRowStatus

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.2.1.10.94.1.1.15.1.20