adslAturCurrStatus

ADSL-LINE-MIB · .1.3.6.1.2.1.10.94.1.1.3.1.6

Object

column Bits

Indicates current state of the ATUR line.  This is a
bit-map of possible conditions.  Due to the isolation
of the ATUR when line problems occur, many state
conditions like loss of power, loss of quality signal,
and initialization errors,  can not be determined.
While trouble shooting ATUR, also use object,
adslAtucCurrStatus.  The various bit positions are:
              
0      noDefect             There no defects on the line
              
1      lossOfFraming        ATUR failure due to not
                     receiving valid frame
              
2      lossOfSignal         ATUR failure due to not
                     receiving signal
              
3      lossOfPower          ATUR failure due to loss of
                     power
              
4      lossOfSignalQuality  Loss of Signal Quality is
                     declared when the Noise Margin
                     falls below the Minimum Noise
                     Margin, or the
                     bit-error-rate exceeds 10^-7.
              
This is intended to supplement ifOperStatus.

Context

MIB: ADSL-LINE-MIB
OID: .1.3.6.1.2.1.10.94.1.1.3.1.6
Type: column
Access: readonly
Status: current
Parent: adslAturPhysEntry
Table: adslAturPhysTable
Siblings: 7

Syntax

Bits

Values & Constraints

Enumerated Values

`0`	noDefect
`1`	lossOfFraming
`2`	lossOfSignal
`3`	lossOfPower
`4`	lossOfSignalQuality

Related Objects

Sibling Objects

Object	Type	Syntax	OID
adslAturInvSerialNumber The vendor specific string that identifies the vendor equipment.	column	OctetString	`.1.3.6.1.2.1.10.94.1.1.3.1.1`
adslAturInvVendorID The vendor ID code is a copy of the binary vendor identification field defined by the PHY[10] and expressed as readable characters.	column	OctetString	`.1.3.6.1.2.1.10.94.1.1.3.1.2`
adslAturInvVersionNumber The vendor specific version number sent by this ATU as part of the initialization messages. It is a copy of the binary version number field defined by the PHY[10] and expressed a…	column	OctetString	`.1.3.6.1.2.1.10.94.1.1.3.1.3`
adslAturCurrSnrMgn Noise Margin as seen by this ATU with respect to its received signal in tenth dB.	column	tenth dB Integer32	`.1.3.6.1.2.1.10.94.1.1.3.1.4`
adslAturCurrAtn Measured difference in the total power transmitted by the peer ATU and the total power received by this ATU.	column	tenth dB Unsigned32	`.1.3.6.1.2.1.10.94.1.1.3.1.5`
adslAturCurrOutputPwr Measured total output power transmitted by this ATU. This is the measurement that was reported during the last activation sequence.	column	tenth dBm Integer32	`.1.3.6.1.2.1.10.94.1.1.3.1.7`
adslAturCurrAttainableRate Indicates the maximum currently attainable data rate by the ATU. This value will be equal or greater than the current line rate.	column	bps SNMPv2-SMIGauge32	`.1.3.6.1.2.1.10.94.1.1.3.1.8`