adslAtucChanConfInterleaveMinTxRate
ADSL-LINE-MIB ·
.1.3.6.1.2.1.10.94.1.1.14.1.12
Object
Configured Minimum Transmit rate for `Interleave' channels, in bps. See adslAtucConfRateChanRatio for information regarding RADSL mode and see ATUR transmit rate for receive rates.
Context
- MIB
- ADSL-LINE-MIB
- OID
.1.3.6.1.2.1.10.94.1.1.14.1.12- Type
- column
- Access
- readwrite
- Status
- current
- Units
- bps
- Parent
- adslLineConfProfileEntry
- Table
- adslLineConfProfileTable
- Siblings
- 29
Syntax
bps SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| adslLineConfProfileName This object is used by the line configuration table
in order to identify a row of this table.
When `dynamic' profiles are implemented, the profile
name is user spec… | column | OctetString | .1.3.6.1.2.1.10.94.1.1.14.1.1 |
| adslAtucConfMinDownshiftTime Minimum time that the current margin is below
DownshiftSnrMgn before a downshift occurs.
In the case that RADSL mode is not present,
the value will be `0'. | column | seconds Integer32 | .1.3.6.1.2.1.10.94.1.1.14.1.10 |
| adslAtucChanConfFastMinTxRate Configured Minimum Transmit rate for `Fast' channels,
in bps. See adslAtucConfRateChanRatio for information
regarding RADSL mode and ATUR transmit rate for
ATUC receive rates. | column | bps SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.94.1.1.14.1.11 |
| adslAtucChanConfFastMaxTxRate Configured Maximum Transmit rate for `Fast' channels,
in bps. See adslAtucConfRateChanRatio for information
regarding RADSL mode and see ATUR transmit rate for
ATUC receive rates. | column | bps SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.94.1.1.14.1.13 |
| adslAtucChanConfInterleaveMaxTxRate Configured Maximum Transmit rate for `Interleave'
channels, in bps. See adslAtucConfRateChanRatio for
information regarding RADSL mode and ATUR transmit
rate for ATUC receive rat… | column | bps SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.94.1.1.14.1.14 |
| adslAtucChanConfMaxInterleaveDelay Configured maximum Interleave Delay for this channel.
Interleave delay applies only to the interleave channel
and defines the mapping (relative spacing) between
sub… | column | milli-seconds Integer32 | .1.3.6.1.2.1.10.94.1.1.14.1.15 |
| adslAturConfRateMode Defines what form of transmit rate adaptation is
configured on this modem. See ADSL Forum TR-005 [3]
for more information. | column | Enumeration | .1.3.6.1.2.1.10.94.1.1.14.1.16 |
| adslAturConfRateChanRatio Configured allocation ratio of excess transmit
bandwidth between fast and interleaved channels. Only
applies when two channel mode and RADSL are supported.
Distribute bandwidth o… | column | % Integer32 | .1.3.6.1.2.1.10.94.1.1.14.1.17 |
| adslAturConfTargetSnrMgn Configured Target Signal/Noise Margin.
This is the Noise Margin the modem must achieve
with a BER of 10-7 or better to successfully complete
initialization. | column | tenth dB Integer32 | .1.3.6.1.2.1.10.94.1.1.14.1.18 |
| adslAturConfMaxSnrMgn Configured Maximum acceptable Signal/Noise Margin.
If the Noise Margin is above this the modem should
attempt to reduce its power output to optimize its
operation. | column | tenth dB Integer32 | .1.3.6.1.2.1.10.94.1.1.14.1.19 |
| adslAtucConfRateMode Defines what form of transmit rate adaptation is
configured on this modem. See ADSL Forum TR-005 [3]
for more information. | column | Enumeration | .1.3.6.1.2.1.10.94.1.1.14.1.2 |
| adslAturConfMinSnrMgn Configured Minimum acceptable Signal/Noise Margin.
If the noise margin falls below this level, the modem
should attempt to increase its power output. If that
is not possible the … | column | tenth dB Integer32 | .1.3.6.1.2.1.10.94.1.1.14.1.20 |
| adslAturConfDownshiftSnrMgn Configured Signal/Noise Margin for rate downshift.
If the noise margin falls below this level, the modem
should attempt to decrease its transmit rate.
In the case that RADSL mode … | column | tenth dB Integer32 | .1.3.6.1.2.1.10.94.1.1.14.1.21 |
| adslAturConfUpshiftSnrMgn Configured Signal/Noise Margin for rate upshift.
If the noise margin rises above this level, the modem
should attempt to increase its transmit rate.
In the case that RADSL is not … | column | tenth dB Integer32 | .1.3.6.1.2.1.10.94.1.1.14.1.22 |
| adslAturConfMinUpshiftTime Minimum time that the current margin is above
UpshiftSnrMgn before an upshift occurs.
In the case that RADSL is not present, the value will
be `0'. | column | seconds Integer32 | .1.3.6.1.2.1.10.94.1.1.14.1.23 |
| adslAturConfMinDownshiftTime Minimum time that the current margin is below
DownshiftSnrMgn before a downshift occurs.
In the case that RADSL mode is not present,
the value will be `0'. | column | seconds Integer32 | .1.3.6.1.2.1.10.94.1.1.14.1.24 |
| adslAturChanConfFastMinTxRate Configured Minimum Transmit rate for `Fast' channels,
in bps. See adslAturConfRateChanRatio for information
regarding RADSL mode and ATUC transmit rate
for ATUR receive rates. | column | bps SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.94.1.1.14.1.25 |
| adslAturChanConfInterleaveMinTxRate Configured Minimum Transmit rate for `Interleave'
channels, in bps. See adslAturConfRateChanRatio for
information regarding RADSL mode and ATUC transmit rate
for ATUR receive rat… | column | bps SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.94.1.1.14.1.26 |
| adslAturChanConfFastMaxTxRate Configured Maximum Transmit rate for `Fast' channels,
in bps. See adslAturConfRateChanRatio for information
regarding RADSL mode and ATUC transmit rate
for ATUR receive rates. | column | bps SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.94.1.1.14.1.27 |
| adslAturChanConfInterleaveMaxTxRate Configured Maximum Transmit rate for `Interleave'
channels, in bps. See adslAturConfRateChanRatio for
information regarding RADSL mode and see
ATUC transmit rate for ATUR receive… | column | bps SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.94.1.1.14.1.28 |
| adslAturChanConfMaxInterleaveDelay Configured maximum Interleave Delay for this channel.
Interleave delay applies only to the interleave channel
and defines the mapping (relative spacing) between
sub… | column | milli-seconds Integer32 | .1.3.6.1.2.1.10.94.1.1.14.1.29 |
| adslAtucConfRateChanRatio Configured allocation ratio of excess transmit
bandwidth between fast and interleaved channels. Only
applies when two channel mode and RADSL are supported.
Distribute bandwidth o… | column | % Integer32 | .1.3.6.1.2.1.10.94.1.1.14.1.3 |
| adslLineConfProfileRowStatus This object is used to create a new row or modify or
delete an existing row in this table.
A profile activated by setting this object to
`active'. When `active' is… | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.10.94.1.1.14.1.30 |
| adslAtucConfTargetSnrMgn Configured Target Signal/Noise Margin.
This is the Noise Margin the modem must achieve
with a BER of 10-7 or better to successfully complete
initialization. | column | tenth dB Integer32 | .1.3.6.1.2.1.10.94.1.1.14.1.4 |
| adslAtucConfMaxSnrMgn Configured Maximum acceptable Signal/Noise Margin.
If the Noise Margin is above this the modem should
attempt to reduce its power output to optimize its
operation. | column | tenth dB Integer32 | .1.3.6.1.2.1.10.94.1.1.14.1.5 |
| adslAtucConfMinSnrMgn Configured Minimum acceptable Signal/Noise Margin.
If the noise margin falls below this level, the modem
should attempt to increase its power output. If that
is not possible the … | column | tenth dB Integer32 | .1.3.6.1.2.1.10.94.1.1.14.1.6 |
| adslAtucConfDownshiftSnrMgn Configured Signal/Noise Margin for rate downshift.
If the noise margin falls below this level, the modem
should attempt to decrease its transmit rate. In
the case that RADSL mode… | column | tenth dB Integer32 | .1.3.6.1.2.1.10.94.1.1.14.1.7 |
| adslAtucConfUpshiftSnrMgn Configured Signal/Noise Margin for rate upshift.
If the noise margin rises above this level, the modem
should attempt to increase its transmit rate. In
the case that RADSL is n… | column | tenth dB Integer32 | .1.3.6.1.2.1.10.94.1.1.14.1.8 |
| adslAtucConfMinUpshiftTime Minimum time that the current margin is above
UpshiftSnrMgn before an upshift occurs.
In the case that RADSL is not present, the value will
be `0'. | column | seconds Integer32 | .1.3.6.1.2.1.10.94.1.1.14.1.9 |