ZTE-AN-GPON-REMOTE-ONU-MIB Table View

Table of ONU equipment entries.

zxAnGponRmOnuEntry row .1.3.6.1.4.1.3902.1082.500.20.2.1.2.1

It is an entry in the zxAnGponRmOnuTable. The index
'zxAnPonOnuIndex' represents the normal ONU index or the virtual
ONU index for profile.

Indexes

IF-MIBifIndex ZTE-AN-PON-BASE-MIBzxAnPonOnuIndex

Column	Syntax	OID
zxAnGponRmOnuVendorId This attribute identifies the vendor of the ONU. It is the same as the four most significant bytes of the ONU serial number as specified in [ITU-T G.984.3] and [ITU-T G.987.3].	SNMPv2-TCDisplayString Constraints: range: 4-4 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.1082.500.20.2.1.2.1.1
zxAnGponRmOnuVersion This attribute identifies the version of the ONU as defined by the vendor. The character value '0' indicates that version information is not available or applicable.	SNMPv2-TCDisplayString Constraints: range: 0-14 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.1082.500.20.2.1.2.1.2
zxAnGponRmOnuSerialNum The serial number is unique for each ONU. It is defined in [ITU-T G.984.3] and [ITU-T G.987.3] and contains the vendor ID and version number. The first four bytes are an ASCII-encoded four-letter vendor ID. The second f…	OctetString Constraints: range: 8-8	.1.3.6.1.4.1.3902.1082.500.20.2.1.2.1.3
zxAnGponRmOnuTrafficOpt This attribute identifies the upstream traffic management function implemented in the ONU. There are three options: 1 Priority controlled and flexibly scheduled upstream traffic. The traffic scheduler and priority q…	Enumeration Enumerated Values: 1 priCtrl 2 rateCtrl 3 priAndRateCtrl 65535 unknown	.1.3.6.1.4.1.3902.1082.500.20.2.1.2.1.4
zxAnGponRmOnuBatteryMonitor This attribute controls whether the ONU performs backup battery monitoring (assuming it is capable of doing so). enabled:enables battery alarm monitoring. disabled:disables battery alarm monitoring.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.3902.1082.500.20.2.1.2.1.5
zxAnGponRmOnuAdminState This attribute locks (2) and unlocks (1) the functions performed by the ONU as an entirety.	Enumerationr/w Enumerated Values: 1 unlocked 2 locked	.1.3.6.1.4.1.3902.1082.500.20.2.1.2.1.6
zxAnGponRmOnuOperState This attribute reports whether the managed entity is currently capable of performing its function. Valid values are enabled (1) and disabled (2).	Enumeration Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.3902.1082.500.20.2.1.2.1.7
zxAnGponRmOnuEquipId This attribute may be used to identify the specific type of ONU. In some environments, this attribute may include the equipment CLEI code.	SNMPv2-TCDisplayString Constraints: range: 0-20 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.1082.500.20.2.1.2.1.8
zxAnGponRmOnuOmccVersion This attribute identifies the version of the OMCC protocol being used by the ONU. This allows the OLT to manage a network with ONUs that support different OMCC versions. Release levels of [ITU-T G.984.4] are supported w…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.1.2.1.9
zxAnGponRmOnuVendorProductCode This attribute is used to provide a vendor-specific product code for the ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.1.2.1.10
zxAnGponRmOnuSecurityCap This attribute is used to advertise the advanced security modes of the ONU. The following codepoints are defined: 0: Reserved for future use; 1: AES encryption of the downstream payload is supported; 2..255: Reserved fo…	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.3902.1082.500.20.2.1.2.1.11
zxAnGponRmOnuSecurityMode This attribute is used to select the advanced security mode for the ONU. Note that all secure VPs/VCs or GEM ports in an ONU must use the same security mode at any time. The following codepoints are defined: 0: Reserved…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.3902.1082.500.20.2.1.2.1.12
zxAnGponRmOnuPriQueueNum This attribute provides a total number of priority queues which re not associated with the PON IF circuit pack. Maximum value is 0x0FFF. Upon autonomous instantiation, this attribute is set to zero.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.1.2.1.13
zxAnGponRmOnuTrafficSchedNum This attribute reports the total number of traffic schedulers that are not associated with a circuit pack, but with the ONU in its entirety. The ONU supports null function, strict priority scheduling and WRR from the pr…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.1.2.1.14
zxAnGponRmOnuRealType This attribute identifies the real type of ONU.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.1082.500.20.2.1.2.1.15
zxAnGponRmOnuSurvivalTime This attribute indicates the minimum guaranteed time in milliseconds between the loss of external power and the silence of the ONU.This does not include survival time attributable to a backup battery.The value zero impl…	MillisecondsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.1.2.1.16
zxAnGponRmOnuTotalGemPortNum This attribute reports the total number of GEM port-IDs supported by the ONU.The maximum value is specified in the corresponding TC recommendation [ITU-T G.984.3] or [ITU-T G.987.3].Upon ME instantiation the ONU sets th…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.1.2.1.17
zxAnGponRmOnuSysUpTime This attribute counts 10 ms intervals since the ONU was last initialized. It rolls over to 0 when full (see [IETF RFC 1213]).	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1082.500.20.2.1.2.1.18
zxAnGponRmOnuAlias This attribute identifies ONU alias.	SNMPv2-TCDisplayStringr/w Constraints: range: 0-16 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.1082.500.20.2.1.2.1.19
zxAnGponRmOnuRegionCode This attribute identifies ONU's region code. It contains the vendor and region code. The first three bytes are an ASCII-encoded three-letter vendor 'ZTE'. The following two bytes are a binary encoded region code. The …	OctetString Constraints: range: 25-25	.1.3.6.1.4.1.3902.1082.500.20.2.1.2.1.20
zxAnGponRmOnuProductionSn This attribute identifies ONU's production serial number. If ONU does not support this attribute and the value is empty string.	SNMPv2-TCDisplayString Constraints: range: 0-25 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.1082.500.20.2.1.2.1.21
zxAnGponRmOnuChipType This attribute identifies ONU's chip type and the type value is defined by the ONU manufacturers. If ONU does not support this attribute and the value is 0.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.3902.1082.500.20.2.1.2.1.22

Operations for ONU.

zxAnGponRmOnuOperEntry row .1.3.6.1.4.1.3902.1082.500.20.2.1.10.1

It is an entry in the zxAnGponRmOnuOperTable. The index
'zxAnPonOnuIndex' represents the normal ONU index.

Indexes

IF-MIBifIndex ZTE-AN-PON-BASE-MIBzxAnPonOnuIndex

Column	Syntax	OID
zxAnGponRmOnuReboot This attribute identifies the reboot action of the ONU.	Enumerationr/w Enumerated Values: 1 reboot	.1.3.6.1.4.1.3902.1082.500.20.2.1.10.1.1
zxAnGponRmOnuSyncTime This attribute identifies the action of the ONU. Synchronize the start time of all performance monitoring managed entities of the ONU with the reference time of the OLT.	Enumerationr/w Enumerated Values: 1 syncTime	.1.3.6.1.4.1.3902.1082.500.20.2.1.10.1.2
zxAnGponRmOnuRestore This attribute identifies the action of the ONU. Reset the MIB data sync attribute to 0 and reset the MIB of the ONU to its default, then deliver the MIB data to ONU to bring ONU MIB into alignment with its own.	Enumerationr/w Enumerated Values: 1 restore	.1.3.6.1.4.1.3902.1082.500.20.2.1.10.1.3
zxAnGponRmOnuRestoreFactory This attribute identifies the action of the ONU, restores the ONU's factory configuration.	Enumerationr/w Enumerated Values: 1 restore	.1.3.6.1.4.1.3902.1082.500.20.2.1.10.1.4
zxAnGponRmOnuWifiRestoreFactory This attribute identifies the action of the ONU, the ONU WiFi configuration information will be restored to the factory settings.	Enumerationr/w Enumerated Values: 1 restore	.1.3.6.1.4.1.3902.1082.500.20.2.1.10.1.5

This managed entity models the ONU's ability to shed services
when the ONU goes into battery operation mode after AC power
failure.

zxAnGponRmPowerShedEntry row .1.3.6.1.4.1.3902.1082.500.20.2.1.20.1

It is an entry in the zxAnGponRmPowerShedTable.
The index 'zxAnPonOnuIndex' represents the normal ONU index or the
virtual ONU index for profile.

Indexes

IF-MIBifIndex ZTE-AN-PON-BASE-MIBzxAnPonOnuIndex

Column	Syntax	OID
zxAnGponRmShedRestoreIntvl The time delay, in seconds, before resetting shedding timers after full power restoration. Upon ME instantiation, the ONU sets this attribute to 0.	SecondsInteger32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.3902.1082.500.20.2.1.20.1.1
zxAnGponRmDataShedIntvl For data service, an interval attribute is defined below. The value 0 disables power shedding, while the value 1 enables immediate power shed, that is, as soon as AC power fails. Other values specify the time, in second…	SecondsInteger32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.3902.1082.500.20.2.1.20.1.2
zxAnGponRmVoiceShedIntvl For voice service, an interval attribute is defined below. The value 0 disables power shedding, while the value 1 enables immediate power shed, that is, as soon as AC power fails. Other values specify the time, in secon…	SecondsInteger32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.3902.1082.500.20.2.1.20.1.3
zxAnGponRmVideoOverlayShedIntvl For video overlay service, an interval attribute is defined below. The value 0 disables power shedding, while the value 1 enables immediate power shed, that is, as soon as AC power fails. Other values specify the time, …	SecondsInteger32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.3902.1082.500.20.2.1.20.1.4
zxAnGponRmVideoReturnShedIntvl For video return service, an interval attribute is defined below. The value 0 disables power shedding, while the value 1 enables immediate power shed, that is, as soon as AC power fails. Other values specify the time, i…	SecondsInteger32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.3902.1082.500.20.2.1.20.1.5
zxAnGponRmDslShedIntvl For DSL service, an interval attribute is defined below. The value 0 disables power shedding, while the value 1 enables immediate power shed, that is, as soon as AC power fails. Other values specify the time, in seconds…	SecondsInteger32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.3902.1082.500.20.2.1.20.1.6
zxAnGponRmAtmShedIntvl For ATM service, an interval attribute is defined below. The value 0 disables power shedding, while the value 1 enables immediate power shed, that is, as soon as AC power fails. Other values specify the time, in seconds…	SecondsInteger32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.3902.1082.500.20.2.1.20.1.7
zxAnGponRmCesShedIntvl For CES service, an interval attribute is defined below. The value 0 disables power shedding, while the value 1 enables immediate power shed, that is, as soon as AC power fails. Other values specify the time, in seconds…	SecondsInteger32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.3902.1082.500.20.2.1.20.1.8
zxAnGponRmFrameShedIntvl For frame service, an interval attribute is defined below. The value 0 disables power shedding, while the value 1 enables immediate power shed, that is, as soon as AC power fails. Other values specify the time, in secon…	SecondsInteger32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.3902.1082.500.20.2.1.20.1.9
zxAnGponRmSonetShedIntvl For sonet service, an interval attribute is defined below. The value 0 disables power shedding, while the value 1 enables immediate power shed, that is, as soon as AC power fails. Other values specify the time, in secon…	SecondsInteger32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.3902.1082.500.20.2.1.20.1.10
zxAnGponRmShedStatus Binary indication of power shedding status for each shedding class. If this two-byte field is depicted 0b ABCD EFGH IJKL MNOP, its bits are assigned: A Data class B Voice class C Video overlay class D Video return class…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.1.20.1.11

Configuration of ONU system parameters.

zxAnGponRmOnuSysResourceEntry row .1.3.6.1.4.1.3902.1082.500.20.2.1.25.1

It is entry in the zxAnGponRmOnuSysTable. The index
'zxAnPonOnuIndex' represents the normal ONU index or the virtual
ONU index for profile.

Indexes

IF-MIBifIndex ZTE-AN-PON-BASE-MIBzxAnPonOnuIndex

Column	Syntax	OID
zxAnGponRmOnuSysCpuLoad CPU usage of ONU.	percentInteger32 Constraints: range: 0-100	.1.3.6.1.4.1.3902.1082.500.20.2.1.25.1.1
zxAnGponRmOnuSysMemUsage Memory usage of ONU.	percentInteger32 Constraints: range: 0-100	.1.3.6.1.4.1.3902.1082.500.20.2.1.25.1.2
zxAnGponRmOnuSysCpuLoadThresh Alarm threshold of CPU usage.	percentInteger32r/w Constraints: range: 0-100	.1.3.6.1.4.1.3902.1082.500.20.2.1.25.1.3
zxAnGponRmOnuSysMemUsageThresh Alarm threshold of memory usage.	percentInteger32r/w Constraints: range: 0-100	.1.3.6.1.4.1.3902.1082.500.20.2.1.25.1.4

GPON ONU capability table.

zxAnGponRmOnuCapabilityEntry row .1.3.6.1.4.1.3902.1082.500.20.2.1.30.1

It is an entry in the zxAnGponRmOnuCapabilityTable.
The index 'zxAnPonOnuIndex' represents the normal ONU index.

Indexes

IF-MIBifIndex ZTE-AN-PON-BASE-MIBzxAnPonOnuIndex

Column	Syntax	OID
zxAnGponRmCapTcontNum This attribute reports the total number of T-CONT supported by the ONU.(2 bytes)	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.1.30.1.1
zxAnGponRmCapGemportNum This attribute reports the total number of GEM port-IDs supported by the ONU.The maximum value is specified in the corresponding TC recommendation [ITU-T G.984.3] or [ITU-T G.987.3].Upon ME instantiation, the ONU sets t…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.1.30.1.2
zxAnGponRmCapTotalPriQueueNum This attribute reports the total number of priority queue supported by the ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.1.30.1.3
zxAnGponRmCapUsPriQueueNum This attribute reports the total number of upstream priority queue supported by the ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.1.30.1.4
zxAnGponRmCapDsPriQueueNum This attribute reports the total number of downstream priority queue supported by the ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.1.30.1.5
zxAnGponRmCapTrafficSchedNum This attribute reports the total number of Traffic Scheduler supported by the ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.1.30.1.6
zxAnGponRmCapTrafficMgmtOption This attribute identifies the upstream traffic management function implemented in the ONU. There are three options: 1 Priority controlled and flexibly scheduled upstream traffic. The traffic scheduler and priority que…	Enumeration Enumerated Values: 1 priCtrl 2 rateCtrl 3 priAndRateCtrl 65535 unkonwn	.1.3.6.1.4.1.3902.1082.500.20.2.1.30.1.7
zxAnGponRmCapTotalUniNum This attribute reports the total number of UNI supported by the ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.1.30.1.8
zxAnGponRmCapEthUniNum This attribute reports the total number of Ethernet UNI supported by the ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.1.30.1.9
zxAnGponRmCapGeUniNum This attribute reports the total number of GE UNI supported by the ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.1.30.1.10
zxAnGponRmCapFeUniNum This attribute reports the total number of FE UNI supported by the ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.1.30.1.11
zxAnGponRmCapCesUniNum This attribute reports the total number of CES UNI supported by the ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.1.30.1.12
zxAnGponRmCapPotsUniNum This attribute reports the total number of POTS UNI supported by the ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.1.30.1.13
zxAnGponRmCapVideoUniNum This attribute reports the total number of video UNI supported by the ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.1.30.1.14
zxAnGponRmCapWifiUniNum This attribute reports the total number of WiFi UNI supported by the ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.1.30.1.15
zxAnGponRmCapIpHostNum This attribute reports the total number of IP host supported by the ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.1.30.1.16
zxAnGponRmCapVeipNum This attribute reports the total number of VEIP supported by the ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.1.30.1.17
zxAnGponRmCapOperatorId This attribute reports the identifier of operator.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.1082.500.20.2.1.30.1.18
zxAnGponRmCapSpecVersion This attribute reports the specific version of CTC.	Enumeration Enumerated Values: 1 ctc2dot0 2 ctc2dot0Revision 3 ctc4dot0 17 ctcXgpon1dot0 65535 unknown	.1.3.6.1.4.1.3902.1082.500.20.2.1.30.1.19
zxAnGponRmCapCategory This attribute reports the equipment type of the ONU.	Enumeration Enumerated Values: 1 sfu 2 hgu 3 sbu 4 cbu 5 mdu 6 mtu 7 sfpAndSfpPlus 8 onefeAnd1PotsSfu 65535 unknown	.1.3.6.1.4.1.3902.1082.500.20.2.1.30.1.20
zxAnGponRmCapTxPowerSupplyCtrl This attribute reports the capability of transmit power supply control support by the ONU.	Enumeration Enumerated Values: 1 notSupport 2 supportTxCtrlOnly 3 supportTxRxCtrlIndependently 65535 unknown	.1.3.6.1.4.1.3902.1082.500.20.2.1.30.1.21
zxAnGponRmCapXdslUniNum This attribute reports the total number of xDSL UNI supported by the ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.1.30.1.22
zxAnGponRmCapCucSpecVersion This attribute reports the specific version of CUC.	Enumeration Enumerated Values: 1 cuc3dot0 2 cuc4dot0 3 cuc5dot0 4 cuc6dot0 65535 unknown	.1.3.6.1.4.1.3902.1082.500.20.2.1.30.1.23
zxAnGponRmCap10GeUniNum This attribute reports the total number of 10GE UNI supported by the ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.1.30.1.24
zxAnGponRmCapIpv6HostNum This attribute reports the total number of IPv6 host supported by the ONU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.1.30.1.25

This managed entity is used to organize data associated with the
Access Network Interface supported by the ONU.
One instance of this managed entity exists for each PON physical
port.
One or more instance of this managed entity are contained in an
instance of a circuit pack that supports a PON IF function.

zxAnGponRmAniEntry row .1.3.6.1.4.1.3902.1082.500.20.2.2.2.1

It is an entry in the zxAnGponRmAniTable. The index
'zxAnPonOnuIndex' represents the normal ONU index or the virtual
ONU index for profile.

Indexes

IF-MIBifIndex ZTE-AN-PON-BASE-MIBzxAnPonOnuIndex zxAnGponRmAniIndex

Column	Syntax	OID
zxAnGponRmAniIndex This attribute indicates the index of ANI in ONU.	ZTE-AN-PON-TC-MIBZxAnPonRmOnuAniIndex Description: ZxAnPonRmOnuAniIndex reprensents the index of ANI in ONU. Usually there's only one ANI in ONU. Two ANIs appear in ONU that supports type C/D protection function.	.1.3.6.1.4.1.3902.1082.500.20.2.2.2.1.1
zxAnGponRmAniSrInd This boolean attribute indicates the capability of status reporting.The value true means that the status reporting is available for all T-CONTs which are associated with the ANI. The default value is false.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.3902.1082.500.20.2.2.2.1.2
zxAnGponRmAniTotalTcontNum This attribu provides the total number of T-CONTs that are able to be supported in this ANI port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.2.2.1.3
zxAnGponRmAniGemBlockLen This attribute specifies the queue occupancy reporting granularity for DBA, in units of bytes. This attribute is meaningful only in [ITU-T G.984 series] systems. In G.984 systems, the value set by the OLT is used by all…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.3902.1082.500.20.2.2.2.1.4
zxAnGponRmAniPiggybackDbaReport The following coding is used to indicate the ONU's piggyback DBA reporting mode capabilities: mode0Only(1): supports mode 0 only; mode0And1(2): supports modes 0 and 1; notSupport(5): piggyback DBA reporting not supporte…	Enumeration Enumerated Values: 1 mode0Only 2 mode0And1 5 notSupport 65535 unknown	.1.3.6.1.4.1.3902.1082.500.20.2.2.2.1.5
zxAnGponRmAniSfThresh This attribute represents the upstream/downstream BER threshold to etect SFi/SF alarm. When this value is y in decimal, the BER threshold for SFi/SF is 10^(-y).The valid values are from 3 to 8 inclusive. Upon autonomous…	Integer32r/w Constraints: range: 3-8	.1.3.6.1.4.1.3902.1082.500.20.2.2.2.1.6
zxAnGponRmAniSdThresh This attribute represents the upstream/downstream BER threshold to detect SDi/SD alarm. When this value is x in decimal, the BER threshold for SDi/SD is 10^(-x).The valid values are from 4 to 10 inclusive. Please note t…	Integer32r/w Constraints: range: 4-10	.1.3.6.1.4.1.3902.1082.500.20.2.2.2.1.7
zxAnGponRmAniArcEnable This attribute allows the activation of alarm reporting control (ARC) for this PPTP or cardholder. The attribute works in concert with the ARC interval attribute. enabled: enables ARC. disabled: disables ARC.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.3902.1082.500.20.2.2.2.1.8
zxAnGponRmAniArcInterval This attribute defines the interval to be used with the ARC function for this PPTP or cardholder. The values 0 through 254 give the duration in minutes for the NALM-QI timer of M.3100. The special value 255 means that t…	MinutesInteger32r/w Constraints: range: 0-255	.1.3.6.1.4.1.3902.1082.500.20.2.2.2.1.9
zxAnGponRmAniRxOptLevel This attribute reports the current measurement of total downstream optical signal level, dBuW, 2s complement, 0.002 dB resolution. 0xFFFF means the optical signal level is unknown(N/A) when ONU is offline.	0.002 dBuWSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.2.2.1.10
zxAnGponRmAniLowerRxOptThresh This attribute specifies the optical level the ONU uses to declare the 1490 nm low received optical power alarm. Valid values are -127 dBm (coded as 254) to 0 dBm (coded as 0) in 0.5 dBm increments. The default value 0x…	0.5 dBmInteger32r/w Constraints: range: 0-100 range: 255-255	.1.3.6.1.4.1.3902.1082.500.20.2.2.2.1.11
zxAnGponRmAniUpperRxOptThresh This attribute specifies the optical level the ONU uses to declare the 1490 nm high received optical power alarm. Valid values are -127 dBm (coded as 254) to 0 dBm (coded as 0) in 0.5 dB increments. The default value 0x…	0.5 dBmInteger32r/w Constraints: range: 0-100 range: 255-255	.1.3.6.1.4.1.3902.1082.500.20.2.2.2.1.12
zxAnGponRmAniOnuRspTime This attribute indicates actual ONU response time recorded by ONU. The unit is nanoseconds.	NanosecondsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.2.2.1.13
zxAnGponRmAniTxOptLevel This attribute reports the current measurement of mean optical launch power, dBuW, 2s complement, 0.002 dB resolution. 0xFFFF means the optical signal level is unknown(N/A) when ONU is offline.	0.002 dBuWSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.2.2.1.14
zxAnGponRmAniLowerTxOptThresh This attribute specifies the transmit power level the ONU uses to declare the low transmit optical power alarm. Its value is a 2s complement integer referred to 1 mW (ie dBm), with 0.5 dB granularity. The default value …	0.5 dBmInteger32r/w Constraints: range: 0-40 range: 129-129 range: 216-255	.1.3.6.1.4.1.3902.1082.500.20.2.2.2.1.15
zxAnGponRmAniUpperTxOptThresh This attribute specifies the transmit power level the ONU uses to declare the high transmit optical power alarm. Its value is a 2s complement integer referred to 1 mW (ie dBm), with 0.5 dB granularity. The default value…	0.5 dBmInteger32r/w Constraints: range: 0-40 range: 129-129 range: 216-255	.1.3.6.1.4.1.3902.1082.500.20.2.2.2.1.16
zxAnGponRmAniPowerFeedVoltage DC voltage, 2s complement, 20 mV resolution.	20 mVSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.2.2.1.17
zxAnGponRmAniLaserBiasCurrent 2s complement, 2 uA resolution.	2 uASNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.2.2.1.18
zxAnGponRmAniTemperature 2s complement, 1/256 degree C resolution.	1/256 CSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.2.2.1.19

This managed entity represents the points at an Ethernet UNI in
the ONU where physical paths terminate and physical path level
functions (e.g., Ethernet function) are performed.One or more
instances of this managed entity shall be contained in an instance
of a Circuit Pack managed entity classified as a native LAN type
(e.g., Ethernet).

zxAnGponRmEthUniEntry row .1.3.6.1.4.1.3902.1082.500.20.2.3.2.1

It is an entry in the zxAnGponRmEthUniTable. The index
'zxAnPonOnuIndex' represents the normal ONU index or the virtual
ONU index for profile.

Indexes

IF-MIBifIndex ZTE-AN-PON-BASE-MIBzxAnPonOnuIndex ZTE-AN-PON-REMOTE-ONU-MIBzxAnPonRmOnuUniIndex

Column	Syntax	OID
zxAnGponRmEthUniExpectedType The following coding is used for this attribute: 0x00 = by autosensing, 0x01 to 0xFE (1 to 254) = one of the values from Table 3 that is compatible with the type of the LIM. Upon autonomous instantiation, the value 0x00…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.3902.1082.500.20.2.3.2.1.1
zxAnGponRmEthUniSensedType If the value of 'Expected type' is not equal to 0x00, then the value of 'Sensed type' equals the value of 'Expected type'. If the value of 'Expected type' equals 0x00, then the value of 'Sensed type' equals one of the v…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.3.2.1.2
zxAnGponRmEthUniIfSpeedConf For 10/100 Base-Tx Ethernet interfaces, this attribute is used to set the configuration options: auto(1):Auto-sensing; half10(2):10BaseT (half duplex); full10(3):10BaseT (full duplex); half100(4):100BaseT (half duplex);…	Enumerationr/w Enumerated Values: 1 auto 2 half10 3 full10 4 half100 5 full100 6 full1000 7 full10000	.1.3.6.1.4.1.3902.1082.500.20.2.3.2.1.3
zxAnGponRmEthUniLoopbackConf This attribute is used to set the Ethernet loopback configuration: No loopback (value 0x01), Loop3 (value 0x04, Loopback of downstream traffic after PHY transceiver).	Enumerationr/w Enumerated Values: 1 noLoop 4 loop3	.1.3.6.1.4.1.3902.1082.500.20.2.3.2.1.4
zxAnGponRmEthUniAdminState This attribute is used to activate (unlock: value 0x01) and deactivate(lock: value 0x02) the functions performed by instances of this managed entity.	Enumerationr/w Enumerated Values: 1 unlocked 2 locked	.1.3.6.1.4.1.3902.1082.500.20.2.3.2.1.5
zxAnGponRmEthUniOperState This attribute indicates whether or not this managed entity is capable of performing its task. The operational state reflects the perceived ability to receive or to generate a valid signal. Valid values are enabled (0x0…	Enumeration Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.3902.1082.500.20.2.3.2.1.6
zxAnGponRmEthUniIfSpeedStatus This attribute indicates the configuration status of the Ethernet UNI. auto(1):Auto-sensing; half10(2):10BaseT (half duplex); full10(3):10BaseT (full duplex); half100(4):100BaseT (half duplex); full100(5):100BaseT (full…	Enumeration Enumerated Values: 1 auto 2 half10 3 full10 4 half100 5 full100 6 full1000 7 full10000 65535 notInservice	.1.3.6.1.4.1.3902.1082.500.20.2.3.2.1.7
zxAnGponRmEthUniMaxFrameSize This attribute denotes the maximum allowed frame size to be transmitted across this interface.	bytesInteger32r/w Constraints: range: 64-8192	.1.3.6.1.4.1.3902.1082.500.20.2.3.2.1.8
zxAnGponRmEthUniDteOrDceInd This attribute specifies the Ethernet interface wiring: 1 DCE or MDI-X (default). 2 DTE or MDI. 3 Automatic selection	Enumerationr/w Enumerated Values: 1 dce 2 dte 3 auto	.1.3.6.1.4.1.3902.1082.500.20.2.3.2.1.9
zxAnGponRmEthUniPauseTime This attribute allows the ONU line card to request that the customer terminal temporarily suspend sending data. Units are in pause quanta(1 pause_quantum equals 512 bits times of the particular implementation).	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.3902.1082.500.20.2.3.2.1.10
zxAnGponRmEthUniBridgeOrIpInd This attribute specifies whether the Ethernet interface is bridged or derived from an IP router function. 1 Bridged 2 IP router 3 Depends on the parent circuit pack. 3 means that the circuit pack's bridge…	Enumerationr/w Enumerated Values: 1 bridged 2 ipRouter 3 either	.1.3.6.1.4.1.3902.1082.500.20.2.3.2.1.11
zxAnGponRmEthUniArcEnable This attribute allows the activation of alarm reporting control (ARC) for this PPTP or cardholder. The attribute works in concert with the ARC interval attribute. enabled: enables ARC. disabled: disables ARC.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.3902.1082.500.20.2.3.2.1.12
zxAnGponRmEthUniArcInterval This attribute defines the interval to be used with the ARC function for this PPTP or cardholder. The values 0 through 254 give the duration in minutes for the NALM-QI timer of M.3100. The special value 255 means that t…	MinutesInteger32r/w Constraints: range: 0-255	.1.3.6.1.4.1.3902.1082.500.20.2.3.2.1.13
zxAnGponRmEthUniPppoeFilter This attribute may be used to control filtering of PPPoE packets on this Ethernet port. The value 2 is used to disable filtering. The value 1 is used to enable filtering. When filtering is enabled, all packets other tha…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.3902.1082.500.20.2.3.2.1.14
zxAnGponRmEthUniPowerFeed This attribute controls whether power is provided to an external equipment over the Ethernet PPTP. Value 1 enables power over Ethernet port. The default value 2 disables power feed.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.3902.1082.500.20.2.3.2.1.15
zxAnGponRmEthUniLoopDetect This attribute enable or disable the loopback detection.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.3902.1082.500.20.2.3.2.1.16
zxAnGponRmEthUniStatusChanges This attribute indicates the changes of operational status. The default value is zero. When the ONU is restored to the factory setting and the attribute value will be restored to the default.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.3902.1082.500.20.2.3.2.1.17

PPTP Ethernet UNI's DHCP control table.

zxAnGponRmUniDhcpIpRetrieveEntry row .1.3.6.1.4.1.3902.1082.500.20.2.3.3.1

It is entry in the zxAnGponRmUniDhcpIpRetrieveTable.The index
'zxAnPonOnuIndex' represents the normal ONU index or the virtual
ONU index for profile.

Indexes

IF-MIBifIndex ZTE-AN-PON-BASE-MIBzxAnPonOnuIndex ZTE-AN-PON-REMOTE-ONU-MIBzxAnPonRmOnuUniIndex

Column	Syntax	OID
zxAnGponRmUniDhcpIpRetrieveMode This attribute specifies the PPTP Ethernet UNI how to obtain its ip address(from ONU or network), when ONU enables the DHCP Server function.	Enumerationr/w Enumerated Values: 1 noSpecify 2 fromOnu 3 fromNetwork 4 forbidden	.1.3.6.1.4.1.3902.1082.500.20.2.3.3.1.1

This managed entity is used to organize data that affects all
ports on a MAC Bridge at a bridged LAN Ethernet UNI interface on
the ONU. Zero or more instances of this managed entity shall be
referred to by the Physical Path Termination Point Ethernet UNI
managed entity.

zxAnGponRmBrgConfEntry row .1.3.6.1.4.1.3902.1082.500.20.2.4.2.1

It is an entry in the zxAnGponRmBrgConfTable. The index
'zxAnPonOnuIndex' represents the normal ONU index or the virtual
ONU index for profile.

Indexes

IF-MIBifIndex ZTE-AN-PON-BASE-MIBzxAnPonOnuIndex zxAnGponRmBrgIndex

Column	Syntax	OID
zxAnGponRmBrgIndex This attribute indicates the index of MAC bridge in ONU, from 1 to 65535.The first byte specifies the slot ID associated with this MAC bridge;the second byte specifies the bridge group ID associated with this MAC bridge.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.4.2.1.1
zxAnGponRmBrgStpEnable This attribute indicates whether or not a spanning tree algorithm is enabled.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.3902.1082.500.20.2.4.2.1.2
zxAnGponRmBrgLearningEnable This attribute indicates whether or not the learning functions of the bridge are enabled.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.3902.1082.500.20.2.4.2.1.3
zxAnGponRmBrgLocalBridgeEnable This attribute indicates whether or not the bridging between UNI ports is enabled.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.3902.1082.500.20.2.4.2.1.4
zxAnGponRmBrgPri This attribute specifies the bridge priority in the range 0..65535. The value of this attribute is copied to the bridge priority attribute of the associated MAC bridge configuration data managed entity.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.3902.1082.500.20.2.4.2.1.5
zxAnGponRmBrgMaxAge This attribute indicates the maximum age for an entry in the spanning tree listing. It indicates the maximum age in seconds for received protocol information before it is discarded.	SecondsInteger32r/w Constraints: range: 6-40	.1.3.6.1.4.1.3902.1082.500.20.2.4.2.1.6
zxAnGponRmBrgHelloTime This attribute provides the time interval between hello packets. It is the time interval, in seconds, that a bridge advertises its presence while as a root or attempting to become a root.	SecondsInteger32r/w Constraints: range: 1-10	.1.3.6.1.4.1.3902.1082.500.20.2.4.2.1.7
zxAnGponRmBrgForwardDelay This attribute gives the time that the bridge on the Ethernet card in the ONU retains a packet before forwarding it. (It indicates the value in seconds that the bridge uses for Forward Delay when the bridge acts as the …	SecondsInteger32r/w Constraints: range: 4-30	.1.3.6.1.4.1.3902.1082.500.20.2.4.2.1.8
zxAnGponRmBrgUnknownMacDiscard This attribute indicates the treatment of MAC frames with unknown destination addresses. enabled: Frames with unknown destination addresses will be discarded. disabled: Frames with unknown destination addresses…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.3902.1082.500.20.2.4.2.1.9
zxAnGponRmBrgMacLearningDepth This attribute specifies the maximum number of UNI MAC addresses to be learned by the bridge. The default value 0 specifies that there is no administratively-imposed limit.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.3902.1082.500.20.2.4.2.1.10
zxAnGponRmBrgAgingTime This attribute specifies the age of dynamic filtering entries in the bridge database, after which unrefreshed entries are discarded. In accordance with [IEEE 802.1D] clause 7.9.2 and [IEEE 802.1Q] clause 8.8.3, the rang…	SecondsInteger32r/w Constraints: range: 10-1000000	.1.3.6.1.4.1.3902.1082.500.20.2.4.2.1.11

This managed entity is used to organize and record data that is
associated with a bridge port. Some of the data is volatile.
Zero or more instances of this managed entity shall be contained
in an instance of the MacBridgeServicePrf. The index
'zxAnPonRmOnuIfIndex' of this table supports Ethernet UNI,
WiFi UNI, IP host and VEIP.

zxAnGponRmBpConfEntry row .1.3.6.1.4.1.3902.1082.500.20.2.4.15.1

It is an entry in the zxAnGponRmBpConfTable. The index
'zxAnPonOnuIndex' represents the normal ONU index or the virtual
ONU index for profile.

Indexes

IF-MIBifIndex ZTE-AN-PON-BASE-MIBzxAnPonOnuIndex ZTE-AN-PON-REMOTE-ONU-MIBzxAnPonRmOnuIfIndex

Column	Syntax	OID
zxAnGponRmBpConfBridgeId This attribute is set-by-create, indicating the bridge when create an bridge port. The first byte stands for the slot ID, the second byte stands for the bridge ID.(2 bytes)	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.3902.1082.500.20.2.4.15.1.1
zxAnGponRmBpConfPortPri This attribute denotes the priority of the port for use in (rapid) spanning tree algorithms. The range is 0..255.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.3902.1082.500.20.2.4.15.1.2
zxAnGponRmBpConfPortPathCost This attribute provides the cost contribution of the port to the path cost towards the spanning tree root bridge. The range is 0x0001 to 0xFFFF (1 to 65535).	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.3902.1082.500.20.2.4.15.1.4
zxAnGponRmBpConfPortStpEnable This attribute indicates whether or not STP LAN topology change detection is enabled at this port.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.3902.1082.500.20.2.4.15.1.5
zxAnGponRmBpConfPortMacAddr This attribute indicates the physical MAC address used by the Port as defined by the TP pointer when the TP type is set to LAN.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.3902.1082.500.20.2.4.15.1.6
zxAnGponRmBpConfOutPrfName This attribute points to a GEM traffic descriptor that limits the traffic rate leaving the MAC bridge.	SNMPv2-TCDisplayStringr/w Constraints: range: 0-64 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.1082.500.20.2.4.15.1.7
zxAnGponRmBpConfInPrfName This attribute points to a GEM traffic descriptor that limits the traffic rate entering the MAC bridge.	SNMPv2-TCDisplayStringr/w Constraints: range: 0-64 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.1082.500.20.2.4.15.1.8
zxAnGponRmBpConfAddrLearnDepth This attribute specifies the maximum number of MAC addresses to be learned by this MAC bridge port. The default value 0 specifies that there is no administratively-imposed limit.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.3902.1082.500.20.2.4.15.1.9
zxAnGponRmBpMacAddrListTotalNum Total number of addresses entries related with this port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.4.15.1.10
zxAnGponRmBpConfEntryRowStatus The status of this conceptual row. The supported actions of this conceptual row only include: To create a row in this table, a manager must set this object to createAndGo(4). …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1082.500.20.2.4.15.1.50

The MAC address list table associated with a bridge port.

zxAnGponRmBpMacAddrListEntry row .1.3.6.1.4.1.3902.1082.500.20.2.4.16.1

It is entry in the zxAnGponRmBpMacAddrListTable. The index
'zxAnPonOnuIndex' represents the normal ONU index.
The index 'zxAnPonRmOnuIfIndex' of this table supports
Ethernet UNI, WiFi UNI, IP host and VEIP.

Indexes

IF-MIBifIndex ZTE-AN-PON-BASE-MIBzxAnPonOnuIndex ZTE-AN-PON-REMOTE-ONU-MIBzxAnPonRmOnuIfIndex zxAnGponRmBpMacAddrIndex

Column	Syntax	OID
zxAnGponRmBpMacAddrIndex Index for getnext.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.4.16.1.1
zxAnGponRmBpMacAddrType The type of addresses entries, the valied value is: static -- This entry is statically assigned. dynamic -- This entry is dynamically learned.	Enumeration Enumerated Values: 1 static 2 dynamic	.1.3.6.1.4.1.3902.1082.500.20.2.4.16.1.2
zxAnGponRmBpMacAddrFilterMode The filter mode of addresses entries, indecate whether packets having them as destination addresses are filtered or forwarded.	Enumeration Enumerated Values: 1 forward 2 filter	.1.3.6.1.4.1.3902.1082.500.20.2.4.16.1.3
zxAnGponRmBpMacAddrAge The MAC address's age, unit in seconds.	SecondsInteger32 Constraints: range: 1-4095	.1.3.6.1.4.1.3902.1082.500.20.2.4.16.1.4
zxAnGponRmBpMacAddr The MAC address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.3902.1082.500.20.2.4.16.1.5

This managed entity is used to organize and record data that is
associated with a bridge port.

zxAnGponRmBpMacFilterEntry row .1.3.6.1.4.1.3902.1082.500.20.2.4.20.1

It is an entry in the zxAnGponRmBpMacFilterTable. The index
'zxAnPonOnuIndex' represents the normal ONU index or the virtual
ONU index for profile.

Indexes

IF-MIBifIndex ZTE-AN-PON-BASE-MIBzxAnPonOnuIndex ZTE-AN-PON-REMOTE-ONU-MIBzxAnPonRmOnuIfIndex zxAnGponRmBpMacFilterAddr

Column	Syntax	OID
zxAnGponRmBpMacFilterAddr This attribute specifies the MAC address being filtered.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.3902.1082.500.20.2.4.20.1.1
zxAnGponRmBpMacFilterFilterMode This attribute specifies the filter action.	Enumerationr/w Enumerated Values: 1 forward 2 discard	.1.3.6.1.4.1.3902.1082.500.20.2.4.20.1.2
zxAnGponRmBpMacFilterType srcMac: filter by source MAC address destMac: filter by destination MAC address	Enumerationr/w Enumerated Values: 1 srcMac 2 destMac	.1.3.6.1.4.1.3902.1082.500.20.2.4.20.1.3
zxAnGponRmBpMacFilterRowStatus The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). In particular, a newly created row cannot be created until the correspond…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1082.500.20.2.4.20.1.50

This managed entity provides an alternate approach to destination
address filtering from that supported through the MAC bridge port
filter table data ME. This alternate approach is useful when all
groups of addresses are stored beforehand in the ONU, and the MAC
bridge port filter preassign table managed entity designates which
groups are valid or invalid for filtering. On a circuit pack in
which all groups of addresses are preassigned and stored locally,
the ONU creates or deletes an instance of this managed entity
automatically upon creation or deletion of a MAC bridge port
configuration data ME.

zxAnGponRmBpEthFilterEntry row .1.3.6.1.4.1.3902.1082.500.20.2.4.25.1

It is an entry in the zxAnGponRmBpEthFilterTable. The index
'zxAnPonOnuIndex' represents the normal ONU index or the virtual
ONU index for profile.

Indexes

IF-MIBifIndex ZTE-AN-PON-BASE-MIBzxAnPonOnuIndex ZTE-AN-PON-REMOTE-ONU-MIBzxAnPonRmOnuIfIndex

Column	Syntax	OID
zxAnGponRmBpEthIpv4McastFilter This attribute indicates whether IPv4 multicast MAC destination addresses are forwarded (value 0x01) or discarded (value 0x02).	Enumerationr/w Enumerated Values: 1 forward 2 discard	.1.3.6.1.4.1.3902.1082.500.20.2.4.25.1.1
zxAnGponRmBpEthIpv6McastFilter This attribute indicates whether IPv6 multicast MAC destination addresses are forwarded (value 0x01) or discarded (value 0x02).	Enumerationr/w Enumerated Values: 1 forward 2 discard	.1.3.6.1.4.1.3902.1082.500.20.2.4.25.1.2
zxAnGponRmBpEthIpv4BcastFilter This attribute indicates whether IPv4 broadcast Ethertypes are forwarded (value 0x01) or discarded (value 0x02).	Enumerationr/w Enumerated Values: 1 forward 2 discard	.1.3.6.1.4.1.3902.1082.500.20.2.4.25.1.3
zxAnGponRmBpEthRarpFilter This attribute indicates whether RARP Ethertypes are forwarded (value 0x01) or discarded (value 0x02).	Enumerationr/w Enumerated Values: 1 forward 2 discard	.1.3.6.1.4.1.3902.1082.500.20.2.4.25.1.4
zxAnGponRmBpEthIpxFilter This attribute indicates whether IPX Ethertypes are forwarded (value 0x01) or discarded (value 0x02).	Enumerationr/w Enumerated Values: 1 forward 2 discard	.1.3.6.1.4.1.3902.1082.500.20.2.4.25.1.5
zxAnGponRmBpEthNetBeuiFilter This attribute indicates whether NetBEUI MAC destination addresses are forwarded (value 0x01) or discarded (value 0x02).	Enumerationr/w Enumerated Values: 1 forward 2 discard	.1.3.6.1.4.1.3902.1082.500.20.2.4.25.1.6
zxAnGponRmBpEthAppleTalkFilter This attribute indicates whether AppleTalk Ethertypes are forwarded (value 0x01) or discarded (value 0x02).	Enumerationr/w Enumerated Values: 1 forward 2 discard	.1.3.6.1.4.1.3902.1082.500.20.2.4.25.1.7
zxAnGponRmBpEthBpduFilter This attribute indicates whether Bridge Management Information MAC destination addresses are forwarded (value 0x01) or discarded (value 0x02).	Enumerationr/w Enumerated Values: 1 forward 2 discard	.1.3.6.1.4.1.3902.1082.500.20.2.4.25.1.8
zxAnGponRmBpEthArpFilter This attribute indicates whether ARP Ethertypes are forwarded (value 0x01) or discarded (value 0x02).	Enumerationr/w Enumerated Values: 1 forward 2 discard	.1.3.6.1.4.1.3902.1082.500.20.2.4.25.1.9
zxAnGponRmBpEthPppoeFilter This attribute indicates whether PPPoE broadcast Ethertypes are forwarded (value 0x01) or discarded (value 0x02).	Enumerationr/w Enumerated Values: 1 forward 2 discard	.1.3.6.1.4.1.3902.1082.500.20.2.4.25.1.10

This managed entity is used to configure the VLAN of multicast.

zxAnGponRmMVlanEntry row .1.3.6.1.4.1.3902.1082.500.20.2.4.30.1

It is an entry in the zxAnGponRmMVlanTable. The index
'zxAnPonOnuIndex' represents the normal ONU index or the virtual
ONU index for profile.

Indexes

IF-MIBifIndex ZTE-AN-PON-BASE-MIBzxAnPonOnuIndex zxAnGponRmMVid

Column	Syntax	OID
zxAnGponRmMVid This attribute represents the VLAN ID(1~4094).	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.3902.1082.500.20.2.4.30.1.1
zxAnGponRmMVlanRowStatus The status of this conceptual row. The state of this conceptual row only support 'not exist' and 'active'. The action of this conceptual row only support 'createAndGo' and 'destroy'. To create a row in t…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1082.500.20.2.4.30.1.50

This table controls the VLAN tagging of downstream multicast data
flow and IGMP.

zxAnGponRmUniMVlanCtrlEntry row .1.3.6.1.4.1.3902.1082.500.20.2.4.31.1

It is entry in the zxAnGponRmUniMVlanCtrlTable. The index
'zxAnPonOnuIndex' represents the normal ONU index or the virtual
ONU index for profile.

Indexes

IF-MIBifIndex ZTE-AN-PON-BASE-MIBzxAnPonOnuIndex ZTE-AN-PON-REMOTE-ONU-MIBzxAnPonRmOnuUniIndex

Column	Syntax	OID
zxAnGponRmUniMVlanTagMode This attribute specifies the multicast VLAN tagging mode.	Enumerationr/w Enumerated Values: 1 stripped 2 notStripped 3 translated	.1.3.6.1.4.1.3902.1082.500.20.2.4.31.1.1

A table entry containing ONU UNI multicast VLAN translation
information. The index 'zxAnGponRmMVid' is the multicast
VLAN before translated.

zxAnGponRmUniMVlanTransEntry row .1.3.6.1.4.1.3902.1082.500.20.2.4.32.1

It is an entry in the zxAnAnGponRmUniMVlanTransTable. The index
'zxAnPonOnuIndex' represents the normal ONU index or the virtual
ONU index for profile.

Indexes

IF-MIBifIndex ZTE-AN-PON-BASE-MIBzxAnPonOnuIndex ZTE-AN-PON-REMOTE-ONU-MIBzxAnPonRmOnuUniIndex zxAnGponRmMVid

Column	Syntax	OID
zxAnGponRmUniMVlanTranslated The multicast VLAN translated.	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.3902.1082.500.20.2.4.32.1.1
zxAnGponRmUniMVlanTransRowStatus The status of this conceptual row. The state of this conceptual row only support 'not exist' and 'active'. The action of this conceptual row only support 'createAndGo' and 'destroy'. To create a row in t…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1082.500.20.2.4.32.1.50

This managed entity organizes data associated with multicast
management at subscriber ports of 802.1 bridges, including 802.1p
mappers when the provisioning model is mapper-based rather than
bridge-based.
Instances of this managed entity are created and deleted by the
OLT.

zxAnGponRmIgmpConfEntry row .1.3.6.1.4.1.3902.1082.500.20.2.4.40.1

It is an entry in the zxAnGponRmIgmpConfTable.
The index 'zxAnPonRmOnuIfIndex' of this table supports Ethernet UNI and VEIP.

Indexes

IF-MIBifIndex ZTE-AN-PON-BASE-MIBzxAnPonOnuIndex ZTE-AN-PON-REMOTE-ONU-MIBzxAnPonRmOnuIfIndex

Column	Syntax	OID
zxAnGponRmIgmpUsedPrfName This attribute points to an instance of the multicast operations profile.	SNMPv2-TCDisplayStringr/w Constraints: range: 0-64 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.1082.500.20.2.4.40.1.1
zxAnGponRmIgmpMaxGroups This attribute specifies the maximum number of dynamic multicast groups that may be replicated to the client port at any one time. The default value 0 specifies that no administrative limit is to be imposed.	Integer32r/w Constraints: range: 0-1000	.1.3.6.1.4.1.3902.1082.500.20.2.4.40.1.2
zxAnGponRmIgmpMaxBw This attribute specifies the maximum imputed dynamic bandwidth, in kbps, that may be delivered to the client port at any one time. The default value 0 specifies that no administrative limit is to be imposed.	kbpsUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.3902.1082.500.20.2.4.40.1.3
zxAnGponRmIgmpBwEnforce enabled: attempts to exceed the max multicast bandwidth be counted and denied. disabled: such attempts be counted but honored.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.3902.1082.500.20.2.4.40.1.4
zxAnGponRmIgmpConfRowStatus The status of this conceptual row. The state of this conceptual row only support 'not exist' and 'active'. The action of this conceptual row only support 'createAndGo' and 'destroy'. To create a row in t…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1082.500.20.2.4.40.1.50

This managed entity provides the current status of each
port with respect to its multicast subscriptions. It may
be useful for status monitoring or debugging purposes.
The status table includes all groups currently subscribed
by the port, both dynamic and static.

zxAnGponRmIgmpMonitorEntry row .1.3.6.1.4.1.3902.1082.500.20.2.4.45.1

It is an entry in the zxAnGponRmIgmpMonitorTable.
The index 'zxAnPonRmOnuIfIndex' of this table supports Ethernet UNI and VEIP.

Indexes

IF-MIBifIndex ZTE-AN-PON-BASE-MIBzxAnPonOnuIndex ZTE-AN-PON-REMOTE-ONU-MIBzxAnPonRmOnuIfIndex

Column	Syntax	OID
zxAnGponRmIgmpMonitorCurrBw This attribute is the ONU's best effort estimate of the actual bandwidth currently being delivered over all dynamic multicast groups.	kbpsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.4.45.1.1
zxAnGponRmIgmpMonitorJoinCnt This attribute counts the number of times the corresponding subscriber sent a join message that was accepted. When full, the counter rolls over to 0.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1082.500.20.2.4.45.1.2
zxAnGponRmIgmpMonitorExceedCnt This attribute counts the number of join messages that did, or would have, exceeded the max multicast bandwidth, whether accepted or denied. When full, the counter rolls over to 0.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.3902.1082.500.20.2.4.45.1.3
zxAnGponRmIgmpMonitorDynGroupNum Total number of dynamic group entries related with this port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.4.45.1.4
zxAnGponRmIgmpMonitorRowStatus The status of this conceptual row. The state of this conceptual row only support 'not exist' and 'active'. The action of this conceptual row only support 'createAndGo' and 'destroy'. To create a row in t…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1082.500.20.2.4.45.1.50

This table lists the groups from the dynamic access control list
that are currently being actively forwarded, along with the actual
bandwidth of each.

zxAnGponRmIgmpDynGroupEntry row .1.3.6.1.4.1.3902.1082.500.20.2.4.50.1

It is an entry in the zxAnGponRmIgmpDynGroupTable. The index
'zxAnPonOnuIndex' represents the normal ONU index or the virtual
ONU index for profile.
The index 'zxAnPonRmOnuIfIndex' of this table supports Ethernet
UNI…

Indexes

IF-MIBifIndex ZTE-AN-PON-BASE-MIBzxAnPonOnuIndex ZTE-AN-PON-REMOTE-ONU-MIBzxAnPonRmOnuIfIndex zxAnGponRmIgmpDynGrpIndex

Column	Syntax	OID
zxAnGponRmIgmpDynGrpIndex Index of IGMP dynamic group.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.4.50.1.1
zxAnGponRmIgmpDynGrpVid VLAN ID, 0 if not used.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.4.50.1.2
zxAnGponRmIgmpDynGrpSrcAddrType The type of IP address denoted in 'zxAnGponRmIgmpDynGrpSrcAddr' object.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.3902.1082.500.20.2.4.50.1.3
zxAnGponRmIgmpDynGrpSrcAddr Source IP address, 0.0.0.0 if not used.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.3902.1082.500.20.2.4.50.1.4
zxAnGponRmIgmpDynGrpDestAddrType The type of IP address denoted in 'zxAnGponRmIgmpDynGrpDestAddr' object.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.3902.1082.500.20.2.4.50.1.5
zxAnGponRmIgmpDynGrpDestAddr Multicast destination IP address.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.3902.1082.500.20.2.4.50.1.6
zxAnGponRmIgmpDynGrpBandwidth Best efforts actual bandwidth estimate.	kbpsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.4.50.1.7
zxAnGponRmIgmpDynGrpStbAddrType The type of IP address denoted in 'zxAnGponRmIgmpDynGrpStbAddr' object.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.3902.1082.500.20.2.4.50.1.8
zxAnGponRmIgmpDynGrpStbAddr Client (set-top box) IP address, that is, the IP address of the device currently joined.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.3902.1082.500.20.2.4.50.1.9
zxAnGponRmIgmpDynGrpRecentJoin Time since the most recent join of this client to the IP channel.	SecondsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.4.50.1.10

This managed entity organizes data associated with VLAN tagging.
Regardless of its point of attachment, the specified tagging
operations refer to the upstream direction. Instances of this
managed entity are created and deleted by the OLT. The index
'zxAnPonRmOnuIfIndex' of this table supports Ethernet UNI,
WiFi UNI, IP host and VEIP.

zxAnGponRmExtVlanEntry row .1.3.6.1.4.1.3902.1082.500.20.2.4.61.1

It is entry in the zxAnGponRmExtVlanTable. The index
'zxAnPonOnuIndex' represents the normal ONU index or the virtual
ONU index for profile.

Indexes

IF-MIBifIndex ZTE-AN-PON-BASE-MIBzxAnPonOnuIndex ZTE-AN-PON-REMOTE-ONU-MIBzxAnPonRmOnuIfIndex

Column	Syntax	OID
zxAnGponRmExtVlanInputTpid This attribute gives the special TPID value for operations on the input (filtering) side of the table. Typical values include 0x8a88 and 0x9100. Default value is 0x8100.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.3902.1082.500.20.2.4.61.1.1
zxAnGponRmExtVlanOutputTpid This attribute gives the special TPID value for operations on the output (tagging) side of the table. Typical values include 0x8a88 and 0x9100. Default value is 0x8100.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.3902.1082.500.20.2.4.61.1.2
zxAnGponRmExtVlanDsMode Regardless of its association, the extended VLAN tagging operation configuration data ME pertains to upstream traffic. This attribute specifies the mode for downstream mapping. 1 The operation performed in the downstrea…	Enumerationr/w Enumerated Values: 1 inverseUpstream 2 noOperation 3 inverseVlanAndPriOthersForward 4 inverseVlanOthersForward 5 inversePriOthersForward 6 inverseVlanAndPriOthersDiscard 7 inverseVlanOthersDiscard 8 inversePriOthersDiscard 9 discard	.1.3.6.1.4.1.3902.1082.500.20.2.4.61.1.3
zxAnGponRmExtVlanDscp2CosPrf This attribute refers to 'zxAnGponRmDscp2CosPrfName',specifies mapping from DSCP to P-bits. The attribute can be considered a bit string sequence of 64 3-bit groups. The 64 sequence entries represent the possible values…	SNMPv2-TCDisplayStringr/w Constraints: range: 0-64 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.1082.500.20.2.4.61.1.4
zxAnGponRmExtVlanRowStatus The status of this conceptual row. The state of this conceptual row only support 'not exist' and 'active'. The action of this conceptual row only support 'createAndGo' and 'destroy'. To create a row in t…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1082.500.20.2.4.61.1.50

This managed entity organizes data associated with VLAN tagging.
Regardless of its point of attachment, the specified tagging
operations refer to the upstream direction. Instances of this
managed entity are created and deleted by the OLT. The index
'zxAnPonRmOnuIfIndex' of this table supports Ethernet UNI,
WiFi UNI, IP host and VEIP.

zxAnGponRmExtVlanRuleConfEntry row .1.3.6.1.4.1.3902.1082.500.20.2.4.62.1

It is entry in the zxAnGponRmExtVlanRuleConfTable. The index
'zxAnPonOnuIndex' represents the normal ONU index or the virtual
ONU index for profile.

Indexes

IF-MIBifIndex ZTE-AN-PON-BASE-MIBzxAnPonOnuIndex ZTE-AN-PON-REMOTE-ONU-MIBzxAnPonRmOnuIfIndex zxAnGponRmExtVlanConfFiltRule

Column	Syntax	OID
zxAnGponRmExtVlanConfFiltRule This attribute refers to 'zxAnGponRmFiltRuleName' provides a unique profile of filter for this extended VLAN table.	SNMPv2-TCDisplayString Constraints: range: 1-64 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.1082.500.20.2.4.62.1.1
zxAnGponRmExtVlanConfTreatRule This attribute refers to 'zxAnGponRmTrtRuleName' provides a unique profile of treatment for this extended VLAN table.	SNMPv2-TCDisplayStringr/w Constraints: range: 1-64 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.1082.500.20.2.4.62.1.2
zxAnGponRmExtVlanConfRowStatus The status of this conceptual row. The state of this conceptual row only support 'not exist' and 'active'. The action of this conceptual row only support 'createAndGo' and 'destroy'. To create a row in t…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1082.500.20.2.4.62.1.50

A table containing VLAN port information for VLANs
configured into the bridge by (local or network)
management,  specifying the set of
ports to which frames received on a VLAN for this FDB
and containing a specific Group destination address are
allowed to be forwarded.
          
When a manager wants to create a VLAN port,it must comply
with the multi-variables usage rule that all the mib variables
related to same fuction must be in one snmp set operation, the
variables have two type: mandatory and optional.
          
Mandatory variables must be in the one snmp set operation.
Optional variables may be in the one snmp set operation with the
mandatory variables, but must not be used alone.
          
To modify a service port,  there are several cases base on the
variable zxAnGponRmVlanPortMode, and the mandatory and optional
variables for each case are different.
          
Case 1: to modify a VLAN port when zxAnGponRmVlanPortMode is
access(1):
- mandatoty:
zxAnGponRmVlanPortMode,
- optional :
zxAnGponRmVlanPortDefaultVid,
zxAnGponRmVlanPortDefaultCos,
          
Case 2: to modify a service port when zxAnGponRmVlanPortMode is
trunk(2):
- mandatoty:
zxAnGponRmVlanPortMode,
- optional :
          
Case 3: to modify a service port when zxAnGponRmVlanPortMode is
hybrid(3):
- mandatoty:
zxAnGponRmVlanPortMode,
- optional :
zxAnGponRmVlanPortDefaultVid,
zxAnGponRmVlanPortDefaultCos,
          
Case 4: to modify a service port when zxAnGponRmVlanPortMode is
transparent(4):
- mandatoty:
zxAnGponRmVlanPortMode,
- optional :
          
Case 5: to modify a service port when zxAnGponRmVlanPortMode is
none(5):
- mandatoty:
zxAnGponRmVlanPortMode,
- optional :

zxAnGponRmVlanPortEntry row .1.3.6.1.4.1.3902.1082.500.20.2.4.63.1

The index 'zxAnPonOnuIndex' represents the normal ONU index or
the virtual ONU index for profile.
The index 'zxAnPonRmOnuIfIndex' of this table supports Ethernet UNI,
WiFi UNI, VEIP, GEM port, Multicast GEM port and WAN…

Indexes

IF-MIBifIndex ZTE-AN-PON-BASE-MIBzxAnPonOnuIndex ZTE-AN-PON-REMOTE-ONU-MIBzxAnPonRmOnuIfIndex

Column	Syntax	OID
zxAnGponRmVlanPortMode The access mode of the port. There are five types: - access: access mode of port access - trunk: trunk mode of port access - hybrid: hybrid mode of port access - transparent: transparent mode of port access - none: dele…	Enumerationr/w Enumerated Values: 1 access 2 trunk 3 hybrid 4 transparent 5 none	.1.3.6.1.4.1.3902.1082.500.20.2.4.63.1.3
zxAnGponRmVlanPortDefaultVid The pvid of the port.	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.3902.1082.500.20.2.4.63.1.4
zxAnGponRmVlanPortDefaultCos The default priority of the port.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.3902.1082.500.20.2.4.63.1.5
zxAnGponRmVlanPortVlanList The VLAN sequence of the port.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.1082.500.20.2.4.63.1.6

Operation command table for VLAN configuration of port.

zxAnGponRmVlanPortCmdEntry row .1.3.6.1.4.1.3902.1082.500.20.2.4.64.1

A list of entries of zxAnGponRmVlanPortCmdTable. The index
'zxAnPonOnuIndex' represents the normal ONU index or the virtual
ONU index for profile.
The index 'zxAnPonRmOnuIfIndex' of this table supports Ethernet
UNI, W…

Indexes

IF-MIBifIndex ZTE-AN-PON-BASE-MIBzxAnPonOnuIndex ZTE-AN-PON-REMOTE-ONU-MIBzxAnPonRmOnuIfIndex

Column	Syntax	OID
zxAnGponRmVlanPortCmd The command to operate VLAN list of 'zxAnGponRmVlanPortTable'. The multi-variables binding rule should be complied with when a manager configures port VLAN cmd. According to this rule, all the related mib…	Enumerationr/w Enumerated Values: 1 addVlan 2 delVlan 3 addAllVlan 4 delAllVlan	.1.3.6.1.4.1.3902.1082.500.20.2.4.64.1.1
zxAnGponRmVlanPortVid This variable must comply with the multi-variables binding rule described in 'zxAnGponRmVlanPortCmd'.	Integer32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.3902.1082.500.20.2.4.64.1.2

A table containing VLAN translate information for VLANs
configured into the bridge by (local or network) management.

zxAnGponRmVlanTransEntry row .1.3.6.1.4.1.3902.1082.500.20.2.4.65.1

VLAN Translate information for VLANs configured into the bridge by
(local or network) management. The index 'zxAnPonOnuIndex'
represents the virtual ONU index for profile.
The index 'zxAnPonRmOnuIfIndex' of this table s…

Indexes

IF-MIBifIndex ZTE-AN-PON-BASE-MIBzxAnPonOnuIndex ZTE-AN-PON-REMOTE-ONU-MIBzxAnPonRmOnuIfIndex zxAnGponRmVlanTransUserVid zxAnGponRmVlanTransUserCos

Column	Syntax	OID
zxAnGponRmVlanTransUserVid User VLAN ID for translation.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.3902.1082.500.20.2.4.65.1.1
zxAnGponRmVlanTransUserCos User priority for translation, the range of priority is from 0 to 8, and '8' indicates no configuration.	Integer32 Constraints: range: 0-8	.1.3.6.1.4.1.3902.1082.500.20.2.4.65.1.2
zxAnGponRmVlanTransCVid Inner VLAN for VLAN translate,'0' indicates no translation. The multi-variables binding rule should be complied with when a manager configures port VLAN translate. According to this rule, all the related mib variables m…	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.3902.1082.500.20.2.4.65.1.3
zxAnGponRmVlanTransCtagCos Inner VLAN priority for VLAN translate,'8' indicates no translation. This variable must comply with the multi-variables binding rule described in 'zxAnGponRmVlanTransCVid'.	Integer32r/w Constraints: range: 0-8	.1.3.6.1.4.1.3902.1082.500.20.2.4.65.1.4
zxAnGponRmVlanTransSVid Outer VLAN for VLAN translate,'0' indicates no SVLAN. This variable must comply with the multi-variables binding rule described in 'zxAnGponRmVlanTransCVid'.	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.3902.1082.500.20.2.4.65.1.5
zxAnGponRmVlanTransStagCos Outer VLAN priority for VLAN translate,'8' indicates copy priority from inner VLAN priority. This variable must comply with the multi-variables binding rule described in 'zxAnGponRmVlanTransCVid'.	Integer32r/w Constraints: range: 0-8	.1.3.6.1.4.1.3902.1082.500.20.2.4.65.1.6
zxAnGponRmVlanTransRowStatus The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). In particular, a newly created row cannot be created until the correspond…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1082.500.20.2.4.65.1.50

The ONU CPU broadcast packet rate limit table.

zxAnGponRmCpuBcastRateLimitEntry row .1.3.6.1.4.1.3902.1082.500.20.2.4.66.1

The ONU CPU broadcast packet rate limit entry.

Indexes

IF-MIBifIndex ZTE-AN-PON-BASE-MIBzxAnPonOnuIndex

Column	Syntax	OID
zxAnGponRmCpuBcastRateLimit The ONU CPU broadcast packet rate limit ingress value. The value 0 means not limited.	ppsUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.3902.1082.500.20.2.4.66.1.1

The ONU port broadcast packet rate limit table.

zxAnGponRmUniBcastRateLimitEntry row .1.3.6.1.4.1.3902.1082.500.20.2.4.67.1

The ONU port broadcast packet rate limit entry.

Indexes

IF-MIBifIndex ZTE-AN-PON-BASE-MIBzxAnPonOnuIndex ZTE-AN-PON-REMOTE-ONU-MIBzxAnPonRmOnuIfIndex

Column	Syntax	OID
zxAnGponRmUniBcastRateLimit The ONU port broadcast packet rate limit ingress value. The value 0 means not limited.	ppsUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.3902.1082.500.20.2.4.67.1.1

This managed entity represents the point at the video UNI in the
ONU where physical paths terminate and physical path level
functions are performed. One or more instances of this managed
entity shall be contained in an instance of a Circuit Pack managed
entity classified as video type.

zxAnGponRmVideoUniEntry row .1.3.6.1.4.1.3902.1082.500.20.2.5.2.1

It is entry in the zxAnGponRmVideoUniTable. The index
'zxAnPonOnuIndex' represents the normal ONU index or the virtual
ONU index for profile.

Indexes

IF-MIBifIndex ZTE-AN-PON-BASE-MIBzxAnPonOnuIndex ZTE-AN-PON-REMOTE-ONU-MIBzxAnPonRmOnuUniIndex

Column	Syntax	OID
zxAnGponRmVideoUniAdminState This attribute is used to activate (unlock) and deactivate (lock) the functions performed by instances of this managed entity.	Enumerationr/w Enumerated Values: 1 unlocked 2 locked	.1.3.6.1.4.1.3902.1082.500.20.2.5.2.1.1
zxAnGponRmVideoUniOperState This attribute indicates whether or not this managed entity is capable of performing its task. The operational state reflects the perceived ability to receive or to generate a valid signal. Valid values are enabled and …	Enumeration Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.3902.1082.500.20.2.5.2.1.2
zxAnGponRmVideoUniArcEnable This attribute allows the activation of alarm reporting control (ARC) for this PPTP or cardholder. The attribute works in concert with the ARC interval attribute. enablde: enables ARC disabled: disables ARC	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.3902.1082.500.20.2.5.2.1.3
zxAnGponRmVideoUniArcInterval This attribute defines the interval to be used with the ARC function for this PPTP or cardholder. The values 0 through 254 give the duration in minutes for the NALM-QI timer of M.3100. The special value 255 means that t…	MinutesInteger32r/w Constraints: range: 0-255	.1.3.6.1.4.1.3902.1082.500.20.2.5.2.1.4
zxAnGponRmVideoUniPowerFeed This attribute controls whether power is provided to an external equipment over the Ethernet PPTP. Value 0x01 enables power over Ethernet. The default value 0x02 disables power feed.(1 byte)	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.3902.1082.500.20.2.5.2.1.5

This managed entity represents an RF video ANI in the ONU,
where physical paths terminate and physical path level
functions are performed. An instance of this managed entity
is associated with each instance of a real or preprovisioned
video ANI port.

zxAnGponRmVideoAniEntry row .1.3.6.1.4.1.3902.1082.500.20.2.5.3.1

It is entry in the zxAnGponRmVideoAniTable. The index
'zxAnPonOnuIndex' represents the normal ONU index or the virtual
ONU index for profile.

Indexes

IF-MIBifIndex ZTE-AN-PON-BASE-MIBzxAnPonOnuIndex

Column	Syntax	OID
zxAnGponRmVideoAniAdminState This attribute is used to activate (unlock: value 1) and deactivate (lock: value 2) the functions performed by instances of this managed entity.	Enumerationr/w Enumerated Values: 1 unlocked 2 locked	.1.3.6.1.4.1.3902.1082.500.20.2.5.3.1.1
zxAnGponRmVideoAniOperState This attribute indicates whether or not this managed entity is capable of performing its task. The operational state reflects the perceived ability to receive or to generate a valid signal. Valid values are enabled (1) …	Enumeration Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.3902.1082.500.20.2.5.3.1.2
zxAnGponRmVideoAniArcEnable This attribute allows the activation of alarm reporting control (ARC) for this PPTP or cardholder. The attribute works in concert with the ARC interval attribute. enablde: enables ARC disabled: disables ARC	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.3902.1082.500.20.2.5.3.1.3
zxAnGponRmVideoAniArcInterval This attribute defines the interval to be used with the ARC function for this PPTP or cardholder. The values 0 through 254 give the duration in minutes for the NALM-QI timer of M.3100. The special value 255 means that t…	MinutesInteger32r/w Constraints: range: 0-255	.1.3.6.1.4.1.3902.1082.500.20.2.5.3.1.4
zxAnGponRmVideoAniLowFreqRange This attribute indicates the lower of the two possible frequency ranges supported. Different frequency ranges are indicated by code points: noLowBand(1): No low band from50to550(2): 50..550 MHz from50to750(3): 50..750 M…	Enumeration Enumerated Values: 1 noLowBand 2 from50to550 3 from50to750 4 from50to870	.1.3.6.1.4.1.3902.1082.500.20.2.5.3.1.5
zxAnGponRmVideoAniHighFreqRange This attribute indicates the higher of the two frequency ranges supported. Different frequency ranges are indicated by code points: noHighBand(1): No high band from550to750(2): 550..750 MHz from550to870(3): 550..870 MHz…	Enumeration Enumerated Values: 1 noHighBand 2 from550to750 3 from550to870 4 from950to2050 5 from2150to3250 6 from950to3250	.1.3.6.1.4.1.3902.1082.500.20.2.5.3.1.6
zxAnGponRmVideoAniSigCap This attribute indicates the capability of the ONU to measure the video signal level. Capabilities are indicated by code points: noCapability(1): No signal level measurement capability total(2): Total optical power leve…	Enumeration Enumerated Values: 1 noCapability 2 total 3 fixed 4 totalAndFixed 5 variable 6 totalAndVariable 7 broadband 8 totalAndBroadband	.1.3.6.1.4.1.3902.1082.500.20.2.5.3.1.7
zxAnGponRmVideoAniOptSigLevel This attribute is an unsigned integer that returns the current measurement of the total optical signal level. If signal capability = 1, 3, 5 or 7, this attribute is undefined. If signal capability =2, 4, 6 or 8, this at…	dBuWSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.5.3.1.8
zxAnGponRmVideoAniPilotSigLevel This attribute indicates the current measurement of the pilot signal level or broadband RF level. If signal capability = 1 or 2, then this attribute is undefined. If signal capability = 3, 4, 5 or 6, this attribut…	dBuVSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.5.3.1.9
zxAnGponRmVideoAniMinSigLevel This attribute indicates the minimum optical RF power per channel that results in a CNR of 47 dBc for a channel of 4.5 MHz bandwidth at a receive optical power of -5 dBm.	dBuWSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.5.3.1.10
zxAnGponRmVideoAniMaxSigLevel This attribute indicates the maximum optical RF power per channel that results in a CTB of -57 dBc for an 80-channel ensemble of carriers at a per-channel optical modulation index of 3.5%.	dBuWSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.3902.1082.500.20.2.5.3.1.11
zxAnGponRmVideoAniPilotFreq This attribute specifies the frequency of the pilot channel receiver. The unit of this attribute is Hz. If signal capability = 1, 2, 7 or 8, this attribute is undefined. If signal capability = 3 or 4, this attribute is …	HzUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.3902.1082.500.20.2.5.3.1.12
zxAnGponRmVideoAniAgcMode This attribute allows the discovery and configuration of the ONU's AGC capabilities. The attribute contains a code point for several AGC types. The ONU displays the currently used AGC mode. The OLT can discover new mode…	Enumerationr/w Enumerated Values: 1 no 2 broadband 3 optical	.1.3.6.1.4.1.3902.1082.500.20.2.5.3.1.13
zxAnGponRmVideoAniAgcValue This attribute indicates the measurement offset that the ONU should use in AGC. The attribute has a step size of 0.1 dB, represented as a signed integer.	0.1 dBInteger32r/w Constraints: range: -128-127	.1.3.6.1.4.1.3902.1082.500.20.2.5.3.1.14
zxAnGponRmVideoAniLowerOptThresh This attribute specifies the optical level used to declare the video OOR low alarm. Valid values are -12 to +6 dBm in 0.1 dB increments, represented as a 2s complement integer. (Coding -120 to +60, where 0x00 = 0dBm, 0x…	0.1 dBInteger32r/w Constraints: range: -120-60	.1.3.6.1.4.1.3902.1082.500.20.2.5.3.1.15
zxAnGponRmVideoAniUpperOptThresh This attribute specifies the optical level used to declare the video OOR high alarm. Valid values are -12 to +6 dBm in 0.1 dB increments, represented as a 2s complement integer. (Coding -120 to +60, 0x00 = 0 dBm, 0x88 =…	0.1 dBInteger32r/w Constraints: range: -120-60	.1.3.6.1.4.1.3902.1082.500.20.2.5.3.1.16

This managed entity represents the local craft terminal UNI,
where physical paths terminate and physical path level
functions are performed.An instance of this managed entity
is associated with an instance of a real or virtual circuit
pack managed entity classified as LCT type.

zxAnGponRmLctUniEntry row .1.3.6.1.4.1.3902.1082.500.20.2.5.5.1

It is an entry in the zxAnGponRmLctUniTable. The index
'zxAnPonOnuIndex' represents the normal ONU index or the virtual
ONU index for profile.

Indexes

IF-MIBifIndex ZTE-AN-PON-BASE-MIBzxAnPonOnuIndex

Column	Syntax	OID
zxAnGponRmLctUniAdminState This attribute locks (2) and unlocks (1) the functions performed by this managed entity. When the administrative state is set to lock, all user functions of this UNI are blocked.	Enumerationr/w Enumerated Values: 1 unlocked 2 locked	.1.3.6.1.4.1.3902.1082.500.20.2.5.5.1.1

An instance of this managed entity is referenced by the
TrafficScheulerUNI.

zxAnGponRmTrafficSchedPrfEntry row .1.3.6.1.4.1.3902.1082.500.20.2.6.2.1

It is an entry in the zxAnGponRmTrafficSchedPrfTable.

Indexes

zxAnGponRmTrffcSchedPrfName

Column	Syntax	OID
zxAnGponRmTrffcSchedPrfName Name of profile.	SNMPv2-TCDisplayString Constraints: range: 1-64 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.3902.1082.500.20.2.6.2.1.2
zxAnGponRmTrffcSchedMode This attribute defines the schedule mode. 'default(4)' means using the default mode of ONU.	Enumerationr/w Enumerated Values: 1 sp 2 wrr 3 spAndWrr 4 default	.1.3.6.1.4.1.3902.1082.500.20.2.6.2.1.3
zxAnGponRmTrffcSchedQueueMap This attribute defines the queue map of 802.1p prioriry. Each byte stands for the queue ID(0~7). Default as: 802.1p priority cos queue ID 0 0 1 0 2 …	OctetStringr/w Constraints: range: 8-8	.1.3.6.1.4.1.3902.1082.500.20.2.6.2.1.4
zxAnGponRmTrffcSchedQueueWeight This attribute defines the queue weight. Each byte stands for the weight(0~15) of queue. The first byte stands for queue0.	OctetStringr/w Constraints: range: 8-8	.1.3.6.1.4.1.3902.1082.500.20.2.6.2.1.5
zxAnGponRmTrffcSchedPrfRowStatus The status of this conceptual row. The state of this conceptual row only support 'not exist' and 'active'. The action of this conceptual row only support 'createAndGo' and 'destroy'. To create a row in t…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.3902.1082.500.20.2.6.2.1.50

This managed entity organizes data associated with IGMP profile.