zxAnGponRmSipOutboundProxyAddr – ZTE-AN-GPON-REMOTE-ONU-MIB

Object

column r/w SNMPv2-TCDisplayString

This attribute points to a large string ME that contains the name
(IP address or URI) of the outbound proxy server for SIP
signalling messages. An outbound SIP proxy may or may not be
required within a given network. If an outbound SIP proxy is
used, the outbound proxy address pointer attribute must be set
to point to a valid large string ME. If an outbound SIP proxy
is not used, the outbound proxy address pointer attribute must be
set to a null pointer.

Context

MIB: ZTE-AN-GPON-REMOTE-ONU-MIB
OID: .1.3.6.1.4.1.3902.1082.500.20.2.6.22.1.3
Type: column
Access: readwrite
Status: current
Parent: zxAnGponRmSipPrfEntry

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-REMOTE-ONU-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-REMOTE-ONU-MIB::zxAnGponRmSipOutboundProxyAddr'

More examples

Read one indexed instance

/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'ZTE-AN-GPON-REMOTE-ONU-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-REMOTE-ONU-MIB::zxAnGponRmSipOutboundProxyAddr.<zxAnGponRmSipPrfName>'

Translate to a numeric OID

/usr/bin/snmptranslate -Pud -Ir -On -m 'ZTE-AN-GPON-REMOTE-ONU-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ZTE-AN-GPON-REMOTE-ONU-MIB::zxAnGponRmSipOutboundProxyAddr'

Syntax

SNMPv2-TCDisplayString

Source: SNMPv2-TCDisplayString
Base type: OctetString
Display format: 255a

Type Description

Represents textual information taken from the NVT ASCII
          
character set, as defined in pages 4, 10-11 of RFC 854.
          
To summarize RFC 854, the NVT ASCII repertoire specifies:
          
  - the use of character codes 0-127 (decimal)
          
  - the graphics characters (32-126) are interpreted as
    US ASCII
          
  - NUL, LF, CR, BEL, BS, HT, VT and FF have the special
    meanings specified in RFC 854
          
  - the other 25 codes have no standard interpretation
          
  - the sequence 'CR LF' means newline
          
  - the sequence 'CR NUL' means carriage-return
          
  - an 'LF' not preceded by a 'CR' means moving to the
    same column on the next line.
          
  - the sequence 'CR x' for any x other than LF or NUL is
    illegal.  (Note that this also means that a string may
    end with either 'CR LF' or 'CR NUL', but not with CR.)
          
Any object defined using this syntax may not exceed 255
characters in length.

Values & Constraints

Object Constraints

range: 0-128

Type Constraints

range: 0..255