TN-SAP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
162

tnSapBaseInfoTable

table
.1.3.6.1.4.1.7483.6.1.2.4.3.2 · 1 row entry · 50 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnSapBaseInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TN-SAP-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TN-SAP-MIB::tnSapBaseInfoTable' 
A table that contains basic SAP information.
tnSapBaseInfoEntry row .1.3.6.1.4.1.7483.6.1.2.4.3.2.1
Information about a specific SAP.
Indexes
Column Syntax OID
tnSapPortId
The ID of the access port where this SAP
is defined.
TN-TC-MIBTmnxPortID .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.1
tnSapEncapValue
The value of the label used to identify this
SAP on the access port specified by tnSapPortId.
TN-TC-MIBTmnxEncapVal .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.2
tnSapRowStatus
This object indicates the status of this row. The
only values supported during a set operation are
'createAndGo' and 'destroy'.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.3
tnSapType
This object indicates the type of service where
this SAP is defined.
TN-SERV-MIBServType
Type Values:
0unknown
1epipe
2p3pipe
3tls
4vprn
5ies
6mirror
7apipe
8fpipe
9ipipe
10cpipe
16etree
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.4
tnSapDescription
Generic information about this SAP.
TN-TC-MIBServObjDescr/w
Type Constraints:
range: 0..80
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.5
tnSapAdminStatus
The desired state of this SAP.
TN-TC-MIBServiceAdminStatusr/w
Type Values:
1up
2down
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.6
tnSapOperStatus
The value of the object tnSapOperStatus indicates the
operating state of this SAP.
Enumeration
Enumerated Values:
1up
2down
3ingressQosMismatch
4egressQosMismatch
5portMtuTooSmall
6svcAdminDown
7iesIfAdminDown
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.7
tnSapIngressQosPolicyId
The value of the object tnSapIngressQosPolicyId specifies
the row index in the tSapIngressTable corresponding to this
ingress QoS policy, or one if no policy is specified.
The value 0 is needed for mirror SAPs that
cann…
TN-TC-MIBTSapIngressPolicyIDr/w .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.8
tnSapIngressMacFilterId
The value of the object tnSapIngressMacFilterId specifies
the row index in the tMacFilterTable corresponding to this
ingress filter, or zero if no filter is specified.
TN-TC-MIBTFilterIDr/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.9
tnSapIngressIpFilterId
The value of the object tnSapIngressIpFilterId specifies the
row index in the tIPFilterTable corresponding to this
ingress filter, or zero if no filter is specified.
TN-TC-MIBTFilterIDr/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.10
tnSapEgressQosPolicyId
The row index in the tSapEgressTable
corresponding to this egress QoS policy,
or one if no policy is specified.
TN-TC-MIBTSapEgressPolicyIDr/w
Type Constraints:
range: 1..65537
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.11
tnSapEgressMacFilterId
The row index in the tMacFilterTable
corresponding to this egress filter,
or zero if no filter is specified.
TN-TC-MIBTFilterIDr/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.12
tnSapEgressIpFilterId
The row index in the tIPFilterTable
corresponding to this egress filter,
or zero if no filter is specified.
TN-TC-MIBTFilterIDr/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.13
tnSapMirrorStatus
This object specifies whether traffic
mirroring has been enabled on this SAP.
Enumeration
Enumerated Values:
1ingress
2egress
3ingressAndEgress
4disabled
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.14
tnSapIesIfIndex
When the value of tnSapType is 'ies' this
object specifies the index of the IES interface
where this SAP is defined. The value of this object
can be set only when the row is created and cannot
be changed while the row s…
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.15
tnSapLastMgmtChange
The value of sysUpTime at the time of the
most recent management-initiated change to
this SAP.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.16
tnSapCollectAcctStats
When the value of this object is 'true' the agent
collects accounting statistics on this SAP.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.17
tnSapAccountingPolicyId
This object specifies the policy to use to collect
accounting statistics on this SAP. The value zero
indicates that the agent should use the default
accounting policy, if one exists.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.18
tnSapVpnId
The VPN ID of the associated service.
TN-SERV-MIBVpnId
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.19
tnSapCustId
The Customer ID of the associated service.
TN-TC-MIBTmnxCustId
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.20
tnSapCustMultSvcSite
The value of this object, when not null, indicates
the Multi-Service Site this SAP is a member of. This
information is used to configure the ingress and
egress QoS schedulers for this SAP.
TN-SERV-MIBServObjNamer/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.21
tnSapIngressQosSchedulerPolicy
This object can be set only when tnSapCustMultSvcSite
is null. It indicates the ingress QoS scheduler for
this SAP.
TN-SERV-MIBServObjNamer/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.22
tnSapEgressQosSchedulerPolicy
This object can be set only when tnSapCustMultSvcSite
is null. It indicates the egress QoS scheduler for
this SAP.
TN-SERV-MIBServObjNamer/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.23
tnSapSplitHorizonGrp
This object specifies the name of the split-horizon
group where the SAP belongs to. This object can be
set only at the time the row is created. Per default
a SAP does not belong to any split-horizon group. The
name spec…
TN-SERV-MIBServObjNamer/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.24
tnSapIngressSharedQueuePolicy
This object indicates the ingress shared queue policy
used by this SAP. When the value of this object is null
it means that the SAP will use individual ingress QoS
queues, instead of the shared ones.
TN-SERV-MIBServObjNamer/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.25
tnSapIngressMatchQinQDot1PBits
This object applies only to SAP's defined on a port
configured for qinq service encapsulation. It indicates
which 802.1P bits will be used to match a QoS or a MAC
filter policy when a double-tagged frame is received on
…
Enumerationr/w
Enumerated Values:
1default
2top
3bottom
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.26
tnSapOperFlags
This object specifies all the conditions that
affect the operating status of this SAP.
Bits
Enumerated Values:
0sapAdminDown
1svcAdminDown
2iesIfAdminDown
3portOperDown
4portMtuTooSmall
5l2OperDown
6ingressQosMismatch
7egressQosMismatch
8relearnLimitExceeded
9recProtSrcMac
10subIfAdminDown
11sapIpipeNoCeIpAddr
12sapTodResourceUnavail
13sapTodMssResourceUnavail
14sapParamMismatch
15sapCemNoEcidOrMacAddr
16sapStandbyForMcRing
17sapSvcMtuTooSmall
18ingressNamedPoolMismatch
19egressNamedPoolMismatch
20ipMirrorNoMacAddr
21sapEpipeNoRingNode
22mcStandby
23mhStandby
24oamDownMepFault
25oamUpMepFault
26ethTunTagMisconfig
27ingressPolicerMismatch
28egressPolicerMismatch
29sapTlsNoRingNode
30ethRingPathBlocked
31oamTunnelMepFault
32operGrpDown
33portBouncing
34sapEgressHQosMgmtMismatch
35evpnP2mpConflict
36l2tpv3TunnelDown
37labelStackLimitExceeded
38sapIngQGrpRedirMismatch
39sapEgrQGrpRedirMismatch
40rstpBlocked
41bpduGuardBlocked
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.27
tnSapLastStatusChange
The value of sysUpTime at the time of the
most recent operating status change to this
SAP.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.28
tnSapAntiSpoofing
The value of the object tnSapAntiSpoofing specifies
the type of anti-spoof filtering applicable on this SAP.

'nextHopIpAndMacAddr (4)' is not supported on SR-1, where
the value of TIMETRA-CHASSIS-MIB::tmn…
Enumerationr/w
Enumerated Values:
0disabled
1sourceIpAddr
2sourceMacAddr
3sourceIpAndMacAddr
4nextHopIpAndMacAddr
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.29
tnSapIngressIpv6FilterId
The value of the object tnSapIngressIpv6FilterId specifies
the row index in the tIPv6FilterTable corresponding to
this ingress ipv6 filter, or zero if no ipv6 filter is
specified.
TN-TC-MIBTFilterIDr/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.30
tnSapEgressIpv6FilterId
The value of the object tnSapEgressIpv6FilterId specifies
the row index in the tIPv6FilterTable corresponding to
this egress ipv6 filter, or zero if no ipv6 filter is
specified.
TN-TC-MIBTFilterIDr/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.31
tnSapTodSuite
The value of the object tnSapTodSuite specifies the Time of
Day (ToD) suite to be applied on this SAP.
An empty string indicates that no ToD suite is applied
on this SAP.
A set request will only be allowed, if the indic…
TN-TC-MIBTNamedItemOrEmptyr/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.32
tnSapIngUseMultipointShared
When the value of tnSapIngressSharedQueuePolicy is not null,
the value of the object tnSapIngUseMultipointShared
specifies whether this SAP uses the multipoint-shared
queues of the shared policy.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.33
tnSapEgressQinQMarkTopOnly
When the encapsulation type of the access port where
this SAP is defined is qinq, the value of the object
tnSapEgressQinQMarkTopOnly specifies which P-bits to mark
during packet egress. When the value is false both set
…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.34
tnSapEgressAggRateLimit
The value of the object tnSapEgressAggRateLimit
specifies the maximum total rate of all egress queues for
this SAP. The value '-1' means that there
is no limit.
kbpsTN-TC-MIBTPortSchedulerPIRr/w
Type Constraints:
range: -1
range: 1..100000000
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.35
tnSapEndPoint
The value of the object tnSapEndPoint specifies the service
endpoint to which this SAP is attached. The tnSvcId of the
SAP MUST match the tnSvcId of the service endpoint.
TN-SERV-MIBServObjNamer/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.36
tnSapIngressVlanTranslation
The value of tnSapIngressVlanTranslation specifies the
desired Ingress Vlan Translation.

A value of 'vlanId' specifies that the value of
tnSapIngressVlanTranslationId is to be used to overwrite
the preser…
Enumerationr/w
Enumerated Values:
1none
2vlanId
3copyOuter
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.37
tnSapIngressVlanTranslationId
The value of tnSapIngressVlanTranslationId specifies the
VLAN id to be used to overwrite the preserved VLAN id
in the packet.

An 'inconsistentValue' error is returned when an
attempt is made to set the va…
Integer32r/w
Constraints:
range: -1-4094
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.38
tnSapSubType
The value of the object tnSapSubType indicates the
sub-type for this SAP.

A value of 'regular' indicates a standard SAP.

A value of 'capture' specifies a capturing SAP
in which triggering p…
Enumerationr/w
Enumerated Values:
0regular
1capture
2managed
3video
5etree-root
6etree-leaf
7etree-branch
8etree-trunk
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.39
tnSapCpmProtPolicyId
The value of tnSapCpmProtPolicyId associates a CPM Protection policy
with a SAP.

A value of zero (0) specifies that no CPM Protection policy is
associated with this SAP.

A value of one (1) …
TN-TC-MIBTCpmProtPolicyIDr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.40
tnSapCpmProtMonitorMac
The value of tnSapCpmProtMonitorMac specifies whether the
tmnxCpmProtPolPerSrcRateLimit of the CPM Protection policy must be applied.

If the value of tnSapCpmProtMonitorMac is 'true', the per-source rate …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.41
tnSapEgressFrameBasedAccounting
The value of tnSapEgressFrameBasedAccounting specifies whether
to use frame-based accounting when evaluating
tnSapEgressAggRateLimit for all egress queues for this SAP.

If the value is 'false', the defaul…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.42
tnSapIngressAggRateLimit
The value of the object tnSapIngressAggRateLimit
specifies the maximum total rate of all ingress queues for
this SAP. The value '-1' means that there
is no limit.
kbpsTN-TC-MIBTPortSchedulerPIRr/w
Type Constraints:
range: -1
range: 1..100000000
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.43
tnSapEgressHsmdaShaperOverride
The value of the object tnSapEgressHsmdaShaperOverride
specifies the name of the secondary shaper for this SAP.
The value must correspond to an entry in the tmnxPortEgrShaperTable.
If the empty string is specified, the …
TN-TC-MIBTNamedItemOrEmptyr/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.44
tnSapIngressHsmdaPacketOffOvr
The value of tnSapIngressHsmdaPacketOffOvr specifies the value,
in bytes, of the adjustment to make to the size of each
packet for HSMDA queue accounting on ingress.
bytesTN-TC-MIBTIngHsmdaPerPacketOffsetOvrr/w
Type Constraints:
range: -128
range: -32..31
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.45
tnSapEgressHsmdaPacketOffOverride
The value of tnSapEgressHsmdaPacketOffOverride specifies the value,
in bytes, of the adjustment to make to the size of each
packet for HSMDA queue accounting on ingress.
bytesTN-TC-MIBTEgrHsmdaPerPacketOffsetOvrr/w
Type Constraints:
range: -128
range: -32..31
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.46
tnSapCallingStationId
The value of tnSapCallingStationId specifies the
calling-station-id to be included in all RADIUS
authentication and accounting requests if configured
to be included in the corresponding RADIUS authentication
or accounti…
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.47
tnSapIsaAaApplicationProfile
The value of tnSapIsaAaApplicationProfile specifies
the ISA-AA application profile for this tnSap. The
specified application profile needs to exist in the
TIMETRA-BSX-NG-MIB::tmnxBsxAppProfTable.
TN-SERV-MIBServObjNamer/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.48
tnSapEthRingIndex
The value of tnSapEthRingIndex specifies the Ethernet Ring
associated with this SAP.

This object, if required, MUST be configured during the
row creation of the tnSapBaseInfoTable row, and MUST
reference …
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.52
tnSapAlmProfName
.
OctetStringr/w
Constraints:
range: 1-40
 .1.3.6.1.4.1.7483.6.1.2.4.3.2.1.53

tnSapTlsInfoTable

table
.1.3.6.1.4.1.7483.6.1.2.4.3.3 · 1 row entry · 79 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnSapTlsInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TN-SAP-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TN-SAP-MIB::tnSapTlsInfoTable' 
A table that contains TLS SAP information.
tnSapTlsInfoEntry row .1.3.6.1.4.1.7483.6.1.2.4.3.3.1
TLS specific information about a SAP.
Indexes
Column Syntax OID
tnSapTlsStpAdminStatus
The value of the object tnSapTlsStpAdminStatus specifies
whether this SAP participates in the TLS's Spanning Tree
Protocol.
TN-TC-MIBTmnxEnabledDisabledr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.1
tnSapTlsStpPriority
The value of the object tnSapTlsStpPriority specifies
the value of the port priority field which is contained in
the most significant 4 bits of the 16-bit Port ID
associated with this SAP. As only the most significant 4…
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.2
tnSapTlsStpPortNum
The value of the object tnSapTlsStpPortNum specifies the
value of the port number field which is contained in the
least significant 12 bits of the 16-bit Port ID associated
with this SAP. Values in the range 2048..4094 …
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.3
tnSapTlsStpPathCost
The value of the object tnSapTlsStpPathCost specifies the
contribution of this port to the path cost of paths
towards the spanning tree root which include this port.
Integer32r/w
Constraints:
range: 1-200000000
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.4
tnSapTlsStpRapidStart
The value of the object tnSapTlsStpRapidStart specifies
whether Rapid Start is enabled on this SAP. When the value
is 'enabled' the Spanning Tree Protocol state transitions
on this SAP are driven by the value of the 'He…
TN-TC-MIBTmnxEnabledDisabledr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.5
tnSapTlsStpBpduEncap
The value of the object tnSapTlsStpBpduEncap specifies the
type of encapsulation used on BPDUs sent out and received
on this SAP.
Enumerationr/w
Enumerated Values:
1dynamic
2dot1d
3pvst
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.6
tnSapTlsStpPortState
The value of the object tnSapTlsStpPortState indicates the
port's current state as defined by application of the
Spanning Tree Protocol. This state controls what action a
port takes on reception of a frame. If the bridg…
TN-SERV-MIBTStpPortState
Type Values:
1disabled
2blocking
3listening
4learning
5forwarding
6broken
7discarding
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.7
tnSapTlsStpDesignatedBridge
The value of the object tnSapTlsStpDesignatedBridge
indicates the Bridge Identifier of the bridge which this
port considers to be the Designated Bridge for this port's
segment.
TN-SERV-MIBBridgeId
Type Constraints:
range: 8
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.8
tnSapTlsStpDesignatedPort
The value of the object tnSapTlsStpDesignatedPort indicates
the Port Identifier of the port on the Designated Bridge
for this port's segment.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.9
tnSapTlsStpForwardTransitions
The value of the object tnSapTlsStpForwardTransitions
indicates the number of times this port has transitioned
from the Learning state to the Forwarding state.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.10
tnSapTlsStpInConfigBpdus
The value of the object tnSapTlsStpInConfigBpdus indicates
the number of Configuration BPDUs received on this SAP.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.11
tnSapTlsStpInTcnBpdus
The value of the object tnSapTlsStpInTcnBpdus indicates the
number of Topology Change Notification BPDUs received on
this SAP.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.12
tnSapTlsStpInBadBpdus
This object specifies the number of bad
BPDUs received on this SAP.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.13
tnSapTlsStpOutConfigBpdus
The value of the object tnSapTlsStpOutConfigBpdus indicates
the number of Configuration BPDUs sent out this SAP.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.14
tnSapTlsStpOutTcnBpdus
This object specifies the number of Topology
Change Notification BPDUs sent out this SAP.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.15
tnSapTlsStpOperBpduEncap
The value of the object tnSapTlsStpOperBpduEncap indicates
the operating encapsulation type used on BPDUs sent out
and received on this SAP.
Enumeration
Enumerated Values:
1dynamic
2dot1d
3pvst
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.16
tnSapTlsVpnId
The value of the object tnSapTlsVpnId indicates the VPN ID
of the associated service.
TN-SERV-MIBVpnId
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.17
tnSapTlsCustId
The Customer ID of the associated service.
TN-TC-MIBTmnxCustId
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.18
tnSapTlsMacAddressLimit
The value of the object tnSapTlsMacAddressLimit specifies
the maximum number of learned and static entries allowed
in the FDB of this SAP. The value 0 means: no limit for
this SAP.

The maximum value of tn…
Integer32r/w
Constraints:
range: 0-511999
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.19
tnSapTlsNumMacAddresses
The value of the object tnSapTlsNumMacAddresses indicates
the number of MAC addresses currently present in the FDB
that belong to this SAP (Both learned and static MAC
addresses are counted).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.20
tnSapTlsNumStaticMacAddresses
The value of the object tnSapTlsNumStaticMacAddresses
indicates the number of static MAC addresses currently
present in the FDB that belong to this SAP.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.21
tnSapTlsMacLearning
The value of the object tnSapTlsMacLearning specifies
whether the MAC learning process is enabled for this SAP.
The value is ignored if MAC learning is disabled on
service level.
TN-TC-MIBTmnxEnabledDisabledr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.22
tnSapTlsMacAgeing
The value of the object tnSapTlsMacAgeing specifies whether
the MAC aging process is enabled for this SAP. the value
is ignored if MAC aging is disabled on service level.
TN-TC-MIBTmnxEnabledDisabledr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.23
tnSapTlsStpOperEdge
The value of the object tnSapTlsStpOperEdge indicates the
operational value of the Edge Port parameter. The object
is initialized to the value of tnSapTlsStpRapidStart and is
set FALSE on reception of a BPDU.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.24
tnSapTlsStpAdminPointToPoint
The value of the object tnSapTlsStpAdminPointToPoint
specifies the administrative point-to-point status of
the LAN segment attached to this tnSap. The value
'forceTrue' means that this port should always be
treated…
Enumerationr/w
Enumerated Values:
0forceTrue
1forceFalse
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.25
tnSapTlsStpPortRole
tnSapTlsStpPortRole indicates the current role of the
tnSap as defined by the Rapid Spanning Tree Protocol.
TN-SERV-MIBStpPortRole
Type Values:
0master
1root
2designated
3alternate
4backup
5disabled
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.26
tnSapTlsStpAutoEdge
tnSapTlsStpAutoEdge specifies whether this SAP
is enabled for auto-edge detection as defined by Rapid
Spanning Tree Protocol.
TN-TC-MIBTmnxEnabledDisabledr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.27
tnSapTlsStpOperProtocol
tnSapTlsStpOperProtocol indicates whether stp, rstp or
mstp is running on this SAP. If the protocol is not
enabled on this SAP, the value notApplicable is
returned.
TN-SERV-MIBStpProtocol
Type Values:
0notApplicable
1stp
2rstp
3mstp
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.28
tnSapTlsStpInRstBpdus
The value of the object tnSapTlsStpInRstBpdus indicates
the number of Rapid Spanning Tree (RST) BPDUs received on
this SAP.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.29
tnSapTlsStpOutRstBpdus
The value of the object tnSapTlsStpOutRstBpdus indicates
the number of Rapid Spanning Tree (RST) BPDUs sent out on
this SAP.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.30
tnSapTlsLimitMacMove
When tnSapTlsLimitMacMove value is set to 'blockable'
the agent will monitor the MAC relearn rate on this
SAP, and it will block it when the re-learn rate
specified by tnSvcTlsMacMoveMaxRate is exceeded. When
…
TN-SERV-MIBTlsLimitMacMover/w
Type Values:
1blockable
2nonBlockable
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.31
tnSapTlsMacPinning
The value of the object tnSapTlsMacPinning specifies whether
or not MAC address pinning is active on this SAP. The
value will be set by default to disabled. However for a
SAP that belongs to a residential SHG, the value…
TN-TC-MIBTmnxEnabledDisabledr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.33
tnSapTlsDiscardUnknownSource
with the object tnSapTlsMacAddressLimit a limit can be
configured for the max number of MAC addresses that
will be learned on this SAP. When this limit is
reached, packets with unknown source MAC address are
fo…
TN-TC-MIBTmnxEnabledDisabledr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.34
tnSapTlsMvplsPruneState
The value of tnSapTlsMvplsPruneState indicates the mVPLS
prune state of the SAP. The object will be set to
notApplicable if the SAP is not managed by a mVPLS. If
the SAP is managed the state reflects whether or not
the …
TN-SERV-MIBMvplsPruneState
Type Values:
1notApplicable
2notPruned
3pruned
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.35
tnSapTlsMvplsMgmtService
The value of tnSapTlsMvplsMgmtService indicates the
service Id of the service where the STP instance is
running that is managing this SAP. This object is
only valid if tnSapTlsMvplsPruneState is different from
notApplic…
TN-TC-MIBTmnxServId
Type Constraints:
range: 0..2147483650
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.36
tnSapTlsMvplsMgmtPortId
The value of tnSapTlsMvplsMgmtPortId indicates the SAP
port Id of the SAP in the mVPLS instance specified in
tnSapTlsMvplsMgmtService that is controlling this SAP.
This object is only valid if tnSapTlsMvplsPruneState is…
TN-TC-MIBTmnxPortID .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.37
tnSapTlsMvplsMgmtEncapValue
The value of tnSapTlsMvplsMgmtEncapValue indicates the
SAP Encap value of the SAP in the mVPLS instance
specified in tnSapTlsMvplsMgmtService that is
controlling this SAP. This object is only valid if
tnSapTlsMvplsPrune…
TN-TC-MIBTmnxEncapVal .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.38
tnSapTlsArpReplyAgent
The value of the object tnSapTlsArpReplyAgent specifies
the status of the special ARP response mechanism in the
system for ARP requests destined to static or dynamic hosts
associated with this SAP.
disabled: the ARP rep…
Enumerationr/w
Enumerated Values:
1disabled
2enabled
3enabledWithSubscrIdent
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.39
tnSapTlsStpException
The value of the object tnSapTlsStpException indicates
whether an STP exception condition is present on this
Sap.
- none : no exception condition found.
- oneWayCommuniation : The neighbor RSTP peer on this link
…
TN-SERV-MIBStpExceptionCondition
Type Values:
1none
2oneWayCommuniation
3downstreamLoopDetected
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.40
tnSapTlsAuthenticationPolicy
The value of the object tnSapTlsAuthenticationPolicy specifies
which subscriber authentication policy must be applied when
a DHCP msg is received on the interface. The authentication
policies must be defined in t…
TN-TC-MIBTPolicyStatementNameOrEmptyr/w .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.41
tnSapTlsL2ptTermination
The value of the object tnSapTlsL2ptTermination specifies
whether received Layer 2 Protocol Tunnel (L2PT) pdu's
are terminated on this port or tnSap.
TN-TC-MIBTmnxEnabledDisabledr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.42
tnSapTlsBpduTranslation
The value of the object tnSapTlsBpduTranslation specifies
whether received L2 Protocol Tunnel pdu's are
translated before being sent out on this port or tnSap.
TN-SERV-MIBTlsBpduTranslationr/w
Type Values:
1auto
2disabled
3pvst
4stp
5pvst-rw
6auto-rw
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.43
tnSapTlsStpRootGuard
The value of the object tnSapTlsStpRootGuard specifies
whether this port is allowed to become STP root port.
It corresponds to the parameter 'restrictedRole' in 802.1Q.
If set, it can cause lack of spanning tree connect…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.44
tnSapTlsStpInsideRegion
The value of the object tnSapTlsStpInsideRegion indicates
whether the network connected to the SAP is in the same
MST region. It corresponds to the parameter 'infoInternal'
in 802.1Q.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.45
tnSapTlsEgressMcastGroup
The value of the object tnSapTlsEgressMcastGroup specifies
the Egress Multicast Group this SAP belongs to.
TN-TC-MIBTNamedItemOrEmptyr/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.46
tnSapTlsStpInMstBpdus
The value of the object tnSapTlsStpInMstBpdus indicates
the number of Multiple Spanning Tree (MST) BPDUs received
on this SAP.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.47
tnSapTlsStpOutMstBpdus
The value of the object tnSapTlsStpOutMstBpdus indicates
the number of Multiple Spanning Tree (MST) BPDUs sent out
on this SAP.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.48
tnSapTlsRestProtSrcMac
The value of the object tnSapTlsRestProtSrcMac specifies
how the agent will handle relearn requests for protected
MAC addresses. When the value of this object is 'true'
requests to relearn a protected MAC address will b…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.49
tnSapTlsRestUnprotDstMac
The value of the object tnSapTlsRestUnprotDstMac specifies
how the system will forward packets destined to an
unprotected MAC address. When the value of this object is
'true' packets destined to an unprotected MAC addre…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.50
tnSapTlsStpRxdDesigBridge
The value of the object tnSapTlsStpRxdDesigBridge
indicates the designated Bridge Identifier in the last
BPDU which was received on this SAP. It identifies
which bridge is connected to the SAP.
TN-SERV-MIBBridgeId
Type Constraints:
range: 8
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.51
tnSapTlsStpRootGuardViolation
The value of the object tnSapTlsStpRootGuardViolation
indicates whether there is a root-guard violation at the
present time. This can only happen when tnSapTlsStpRootGuard
is set to true.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.52
tnSapTlsShcvAction
The value of the object tnSapTlsShcvAction
indicates whether any action should be triggered when
the connectivity check fails.
Enumerationr/w
Enumerated Values:
1alarm
2remove
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.53
tnSapTlsShcvSrcIp
The value of the object tnSapTlsShcvSrcIp
specifies the source IP address used when doing the
connectivity check. The value 0.0.0.0 indicates that
no host IP address is specified.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.54
tnSapTlsShcvSrcMac
The value of the object tnSapTlsShcvSrcMac
specifies the MAC address used when doing the connectivity
check. The value 0:0:0:0:0:0 indicates that no host MAC
address is specified.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.55
tnSapTlsShcvInterval
The value of the object tnSapTlsShcvInterval specifies
the interval in minutes between connectivity checks.
Zero means no connectivity checking.
minutesUnsigned32r/w
Constraints:
range: 0-6000
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.56
tnSapTlsMvplsMgmtMsti
The value of the object tnSapTlsMvplsMgmtMsti indicates the
MST-instance in the mVPLS instance specified in
tnSapTlsMvplsMgmtService that is controlling this SAP. A
value of 0 indicates the CIST.
This object is only val…
TN-SERV-MIBMstiInstanceIdOrZero
Type Constraints:
range: 0..4094
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.57
tnSapTlsMacMoveNextUpTime
The value of the object tnSapTlsMacMoveNextUpTime counts down
the time in seconds until a SAP that has been brought down
due to exceeding the TLS tnSvcTlsMacMoveMaxRate, tnSapOperFlags
'relearnLimitExceeded', is automat…
secondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.58
tnSapTlsMacMoveRateExcdLeft
The value of the object tnSapTlsMacMoveRateExcdLeft
counts down the number of times this SAP can exceed the
TLS tnSvcTlsMacMoveMaxRate and still be automatically
brought up.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.59
tnSapTlsRestProtSrcMacAction
The value of the object tnSapTlsRestProtSrcMacAction
indicates the action to take whenever a relearn request
for a protected MAC is received on a restricted SAP.
When the value of this object is 'disable' the SAP
will b…
Enumerationr/w
Enumerated Values:
1disable
2alarm-only
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.60
tnSapTlsL2ptForceBoundary
The value of tnSapTlsL2ptForceBoundary specifies if
tnSapTlsL2ptTermination is enforced for its managed SAP's.
Setting the value of the object tnSapTlsL2ptForceBoundary of
a SAP in a Management VPLS to `true' forces all…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.61
tnSapTlsLimitMacMoveLevel
The value of the object tnSapTlsLimitMacMoveLevel
specifies the hierarchy in which SAPs are
blocked when a MAC-move limit is exceeded. When a MAC is
moving among multiple SAPs or spoke-SDPs, the SAP bind
or spoke-SDP bi…
TN-SERV-MIBTlsLimitMacMoveLevelr/w
Type Values:
1primary
2secondary
3tertiary
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.62
tnSapTlsBpduTransOper
The value of the object tnSapTlsBpduTransOper indicates
the operational bpdu encapsulation used for BPDU
translated frames.
Enumeration
Enumerated Values:
1undefined
2disabled
3pvst
4stp
5pvst-rw
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.63
tnSapTlsDefMtnSapPolicy
The value of tnSapTlsDefMtnSapPolicy specifies the
default Managed SAP policy to use to create
Managed SAPs when the response from the Radius
server does not specify a Managed SAP policy.

The value of tnS…
TN-TC-MIBTPolicyStatementNameOrEmptyr/w .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.64
tnSapTlsL2ptProtocols
The value of the object tnSapTlsL2ptTermination specifies
which L2 Protocol Tunnel pdu's are terminated
on this port or tnSap.
TN-SERV-MIBL2ptProtocolsr/w
Type Values:
0stp
1cdp
2vtp
3dtp
4pagp
5udld
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.65
tnSapTlsL2ptForceProtocols
The value of the object tnSapTlsL2ptForceProtocols specifies
which L2 Protocol Tunnel pdu's must be terminated by
SAP's managed by this SAP.
This object is only relevant if the value of the object
tnSapTlsL2ptForceBound…
TN-SERV-MIBL2ptProtocolsr/w
Type Values:
0stp
1cdp
2vtp
3dtp
4pagp
5udld
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.66
tnSapTlsPppoeMtnSapTrigger
The value of tnSapTlsPppoeMtnSapTrigger specifies whether
the receipt of PPPoE trigger packets on a VPLS SAP
with a tnSapSubType value of 'capture' will result in
a Radius authentication that will provide a service
cont…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.67
tnSapTlsDhcpMtnSapTrigger
The value of tnSapTlsDhcpMtnSapTrigger specifies whether
the receipt of DHCP trigger packets on this VPLS SAP
with a tnSapSubType value of 'capture' will result in
a Radius authentication that will provide a service
con…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.68
tnSapTlsMrpJoinTime
The value of tnSapTlsMrpJoinTime specifies a timer value in
10ths of seconds which determines the maximum rate at
which attribute join messages can be sent on the SAP.
deci-secondsUnsigned32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.69
tnSapTlsMrpLeaveTime
The value of tnSapTlsMrpLeaveTime specifies a timer value in
10ths of seconds which determines the amount of time a
registered attribute is held in leave state before the
registration is removed.
deci-secondsUnsigned32r/w
Constraints:
range: 30-60
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.70
tnSapTlsMrpLeaveAllTime
The value of tnSapTlsMrpLeaveAllTime specifies the a timer
value in 10ths of seconds which determines the frequency
where all attribute declarations on the SAP are all
refreshed.
deci-secondsUnsigned32r/w
Constraints:
range: 60-300
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.71
tnSapTlsMrpPeriodicTime
The value of tnSapTlsMrpPeriodicTime specifies a timer value
in 10ths of seconds which determines the frequency of
re-transmission of attribute declarations.
deci-secondsUnsigned32r/w
Constraints:
range: 10-100
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.72
tnSapTlsMrpPeriodicEnabled
The value of tnSapTlsMrpPeriodicEnabled specifies whether
re-transmission of attribute declarations is enabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.73
tnSapTlsPppoePolicy
The value of tnSapTlsPppoePolicy specifies the PPPoE
policy (defined in TIMETRA-PPPOE-MIB::tmnxPppoePlcyTable)
to use to create Managed SAPs via PPPoE with PAP/CHAP
authentication.

The value of tnSapTlsPp…
TN-TC-MIBTNamedItemOrEmptyr/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.74
tnSapTlsArpMsapTrigger
The value of tnSapTlsArpMsapTrigger specifies whether
the receipt of ARP trigger packets on this VPLS SAP
with a tnSapSubType value of 'capture' will result in
a Radius authentication that will provide a service
context…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.75
tnSapTlsInTcBitBpdus
The value of the object sapTlsInTcBitBpdus indicates the
number of BPDUs received on this SAP
with the Topology Change bit set.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.76
tnSapTlsOutTcBitBpdus
The value of the object sapTlsOutTcBitBpdus indicates the
number of BPDUs sent out this SAP
with the Topology Change bit set.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.77
tnSapTlsShcvRetryTimeout
The value of the object sapTlsShcvRetryTimeout specifies
the timeout in seconds before a connectivity check
retransmission.
secondsUnsigned32r/w
Constraints:
range: 10-60
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.81
tnSapTlsShcvRetryCount
The value of the object sapTlsShcvRetryCount specifies
the number of connectivity check retransmissions.

Setting the value to n specifies that, for any given host,
at most (n+1) probes are done each inter…
Unsigned32r/w
Constraints:
range: 2-29
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.82
tnSapTlsFdbTableSizeProfIddeprecated
The value of the object tnSapTlsFdbTableSizeProfId specifies
the row index in the tnPacketSwitchFdbTableSizeProfileTable
corresponding to this Fdb Table Size Profile, or one if no
profile is specified.
TN-TC-MIBTFdbTableSizeProfileIDr/w
Type Constraints:
range: 1..7
 .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.83

tnSapBaseStatsTable

table
.1.3.6.1.4.1.7483.6.1.2.4.3.6 · 1 row entry · 28 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnSapBaseStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TN-SAP-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TN-SAP-MIB::tnSapBaseStatsTable' 
A table that contains basic SAP statistics.
In the descriptions below 'Pchip' refers
to the Nokia 7x50 SR series Packet Processing
chip, while 'Qchip' refers to the Nokia 7x50
SR series QoS Queueing Engine chip.
tnSapBaseStatsEntry row .1.3.6.1.4.1.7483.6.1.2.4.3.6.1
Basic statistics about a specific SAP.
Indexes
Column Syntax OID
tnSapBaseStatsIngressPchipDroppedPackets
The number of packets dropped by the
ingress Pchip due to: SAP state,
ingress MAC, IP or IPv6 filter, same segment
discard, bad checksum, etc.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.6.1.2.4.3.6.1.1
tnSapBaseStatsIngressPchipDroppedOctets
The number of octets dropped by the
ingress Pchip due to: SAP state,
ingress MAC, IP or IPv6 filter, same segment
discard, bad checksum, etc.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.6.1.2.4.3.6.1.2
tnSapBaseStatsIngressPchipOfferedHiPrioPackets
The number of high priority packets,
as determined by the SAP ingress QoS
policy, offered by the Pchip to the
Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.6.1.2.4.3.6.1.3
tnSapBaseStatsIngressPchipOfferedHiPrioOctets
The number of high priority octets,
as determined by the SAP ingress QoS
policy, offered by the Pchip to the
Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.6.1.2.4.3.6.1.4
tnSapBaseStatsIngressPchipOfferedLoPrioPackets
The number of low priority packets,
as determined by the SAP ingress QoS
policy, offered by the Pchip to the
Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.6.1.2.4.3.6.1.5
tnSapBaseStatsIngressPchipOfferedLoPrioOctets
The number of low priority octets,
as determined by the SAP ingress QoS
policy, offered by the Pchip to the
Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.6.1.2.4.3.6.1.6
tnSapBaseStatsIngressQchipDroppedHiPrioPackets
The number of high priority packets,
as determined by the SAP ingress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit
exceeded, etc.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.6.1.2.4.3.6.1.7
tnSapBaseStatsIngressQchipDroppedHiPrioOctets
The number of high priority octets,
as determined by the SAP ingress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit
exceeded, etc.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.6.1.2.4.3.6.1.8
tnSapBaseStatsIngressQchipDroppedLoPrioPackets
The number of low priority packets,
as determined by the SAP ingress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit
exceeded, etc.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.6.1.2.4.3.6.1.9
tnSapBaseStatsIngressQchipDroppedLoPrioOctets
The number of low priority octets,
as determined by the SAP ingress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit
exceeded, etc.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.6.1.2.4.3.6.1.10
tnSapBaseStatsIngressQchipForwardedInProfPackets
The number of in-profile packets
(rate below CIR) forwarded by the
ingress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.6.1.2.4.3.6.1.11
tnSapBaseStatsIngressQchipForwardedInProfOctets
The number of in-profile octets
(rate below CIR) forwarded by the
ingress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.6.1.2.4.3.6.1.12
tnSapBaseStatsIngressQchipForwardedOutProfPackets
The number of out-of-profile packets
(rate above CIR) forwarded by the
ingress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.6.1.2.4.3.6.1.13
tnSapBaseStatsIngressQchipForwardedOutProfOctets
The number of out-of-profile octets
(rate above CIR) forwarded by the
ingress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.6.1.2.4.3.6.1.14
tnSapBaseStatsEgressQchipDroppedInProfPackets
The number of in-profile packets
discarded by the egress Qchip due
to: MBS exceeded, buffer pool limit
exceeded, etc.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.6.1.2.4.3.6.1.15
tnSapBaseStatsEgressQchipDroppedInProfOctets
The number of in-profile octets
discarded by the egress Qchip due
to: MBS exceeded, buffer pool limit
exceeded, etc.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.6.1.2.4.3.6.1.16
tnSapBaseStatsEgressQchipDroppedOutProfPackets
The number of out-of-profile packets
discarded by the egress Qchip due
to: MBS exceeded, buffer pool limit
exceeded, etc.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.6.1.2.4.3.6.1.17
tnSapBaseStatsEgressQchipDroppedOutProfOctets
The number of out-of-profile packets
discarded by the egress Qchip due
to: MBS exceeded, buffer pool limit
exceeded, etc.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.6.1.2.4.3.6.1.18
tnSapBaseStatsEgressQchipForwardedInProfPackets
The number of in-profile packets
(rate below CIR) forwarded by the
egress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.6.1.2.4.3.6.1.19
tnSapBaseStatsEgressQchipForwardedInProfOctets
The number of in-profile octets
(rate below CIR) forwarded by the
egress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.6.1.2.4.3.6.1.20
tnSapBaseStatsEgressQchipForwardedOutProfPackets
The number of out-of-profile packets
(rate above CIR) forwarded by the
egress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.6.1.2.4.3.6.1.21
tnSapBaseStatsEgressQchipForwardedOutProfOctets
The number of out-of-profile octets
(rate above CIR) forwarded by the
egress Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.6.1.2.4.3.6.1.22
tnSapBaseStatsCustId
The Customer ID for the associated service.
TN-TC-MIBTmnxCustId
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.7483.6.1.2.4.3.6.1.23
tnSapBaseStatsIngressPchipOfferedUncoloredPackets
The number of uncolored packets,
as determined by the SAP ingress QoS
policy, offered by the Pchip to the
Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.6.1.2.4.3.6.1.24
tnSapBaseStatsIngressPchipOfferedUncoloredOctets
The number of uncolored octets,
as determined by the SAP ingress QoS
policy, offered by the Pchip to the
Qchip.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7483.6.1.2.4.3.6.1.25
tnSapBaseStatsAuthenticationPktsDiscarded
The number of DHCP packets discarded
as result of authentication.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.6.1.2.4.3.6.1.26
tnSapBaseStatsAuthenticationPktsSuccess
The number of DHCP packets successfully authenticated.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.6.1.2.4.3.6.1.27
tnSapBaseStatsLastClearedTime
The value of tnSapBaseStatsLastClearedTime indicates
the sysUpTime when the counters in this table were
last cleared.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.7483.6.1.2.4.3.6.1.28

tnSapEthernetInfoTable

table
.1.3.6.1.4.1.7483.6.1.2.4.3.43 · 1 row entry · 5 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnSapEthernetInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TN-SAP-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TN-SAP-MIB::tnSapEthernetInfoTable' 
A table that contains Ethernet SAP information.
tnSapEthernetInfoEntry row .1.3.6.1.4.1.7483.6.1.2.4.3.43.1
Information about a specific Ethernet SAP.
Indexes
Column Syntax OID
tnSapEthernetLLFAdminStatus
tnSapEthernetLLFAdminStatus specifies whether or not Link-
Loss Forwarding is enabled ('up'). When this object is set
to 'up' the underlying port will be forced into the
operationally 'down' state if the service is oper…
TN-TC-MIBServiceAdminStatusr/w
Type Values:
1up
2down
 .1.3.6.1.4.1.7483.6.1.2.4.3.43.1.1
tnSapEthernetLLFOperStatus
tnSapEthernetLLFOperStatus indicates whether or not the
underlying port is forced operationally 'down' due to the
service being operationally 'down' or an
sdpBindPwPeerStatusBits bit is set.
tnSapEthernetLLFOperStatus i…
Enumeration
Enumerated Values:
1fault
2clear
 .1.3.6.1.4.1.7483.6.1.2.4.3.43.1.2
tnSapEthernetLLFId
sapEthernetLLFId specifies an identifier between sending
and receiving objects that are LLF enabled. Only the object with
the same sapEthernetLLFId will receive the LLF status.
There can be up to five pairs of LLF-enabl…
Unsigned32r/w
Constraints:
range: 0-5
 .1.3.6.1.4.1.7483.6.1.2.4.3.43.1.3
tnSapEthernetLoopbackMode
tnSapEthernetLoopbackMode specifies the loopback mode of a sap.
When mode 'terminal' is set, SAP terminal loopback is enabled
with MAC swap.
When mode 'facility' is set, SAP facility loopback is enabled.
No MAC swap…
TN-TC-MIBSapLoopbackModer/w
Type Values:
1disabled
2terminal
3facility
 .1.3.6.1.4.1.7483.6.1.2.4.3.43.1.4
tnSapEthernetLoopbackMacSwapStaticMac
tnSapEthernetLoopbackMacSwapStaticMac indicates whether or
not a unicast MAC is used in MAC swap when SAP terminal
loopback is enabled. tnCardSapLoopbackMacAddr or
tnPacketSwitchSapLoopbackMacAddr need to be provisione…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.6.1.2.4.3.43.1.5