tnSapTlsL2ptTermination
TN-SAP-MIB ·
.1.3.6.1.4.1.7483.6.1.2.4.3.3.1.42
Object
The value of the object tnSapTlsL2ptTermination specifies whether received Layer 2 Protocol Tunnel (L2PT) pdu's are terminated on this port or tnSap.
Context
- MIB
- TN-SAP-MIB
- OID
.1.3.6.1.4.1.7483.6.1.2.4.3.3.1.42- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tnSapTlsInfoEntry
- Table
- tnSapTlsInfoTable
- Siblings
- 78
Values & Constraints
Type Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tnSapTlsStpAdminStatus The value of the object tnSapTlsStpAdminStatus specifies
whether this SAP participates in the TLS's Spanning Tree
Protocol. | column | TN-TC-MIBTmnxEnabledDisabled | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.1 |
| tnSapTlsStpForwardTransitions The value of the object tnSapTlsStpForwardTransitions
indicates the number of times this port has transitioned
from the Learning state to the Forwarding state. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.10 |
| tnSapTlsStpInConfigBpdus The value of the object tnSapTlsStpInConfigBpdus indicates
the number of Configuration BPDUs received on this SAP. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.11 |
| tnSapTlsStpInTcnBpdus The value of the object tnSapTlsStpInTcnBpdus indicates the
number of Topology Change Notification BPDUs received on
this SAP. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.12 |
| tnSapTlsStpInBadBpdus This object specifies the number of bad
BPDUs received on this SAP. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.13 |
| tnSapTlsStpOutConfigBpdus The value of the object tnSapTlsStpOutConfigBpdus indicates
the number of Configuration BPDUs sent out this SAP. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.14 |
| tnSapTlsStpOutTcnBpdus This object specifies the number of Topology
Change Notification BPDUs sent out this SAP. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.15 |
| tnSapTlsStpOperBpduEncap The value of the object tnSapTlsStpOperBpduEncap indicates
the operating encapsulation type used on BPDUs sent out
and received on this SAP. | column | Enumeration | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.16 |
| tnSapTlsVpnId The value of the object tnSapTlsVpnId indicates the VPN ID
of the associated service. | column | TN-SERV-MIBVpnId | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.17 |
| tnSapTlsCustId The Customer ID of the associated service. | column | TN-TC-MIBTmnxCustId | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.18 |
| tnSapTlsMacAddressLimit The value of the object tnSapTlsMacAddressLimit specifies
the maximum number of learned and static entries allowed
in the FDB of this SAP. The value 0 means: no limit for
this SAP… | column | Integer32 | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.19 |
| tnSapTlsStpPriority The value of the object tnSapTlsStpPriority specifies
the value of the port priority field which is contained in
the most significant 4 bits of the 16-bit Port ID
associated with … | column | Integer32 | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.2 |
| tnSapTlsNumMacAddresses The value of the object tnSapTlsNumMacAddresses indicates
the number of MAC addresses currently present in the FDB
that belong to this SAP (Both learned and static MAC
address… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.20 |
| tnSapTlsNumStaticMacAddresses The value of the object tnSapTlsNumStaticMacAddresses
indicates the number of static MAC addresses currently
present in the FDB that belong to this SAP. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.21 |
| tnSapTlsMacLearning The value of the object tnSapTlsMacLearning specifies
whether the MAC learning process is enabled for this SAP.
The value is ignored if MAC learning is disabled on
service level. | column | TN-TC-MIBTmnxEnabledDisabled | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.22 |
| tnSapTlsMacAgeing The value of the object tnSapTlsMacAgeing specifies whether
the MAC aging process is enabled for this SAP. the value
is ignored if MAC aging is disabled on service level. | column | TN-TC-MIBTmnxEnabledDisabled | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.23 |
| tnSapTlsStpOperEdge The value of the object tnSapTlsStpOperEdge indicates the
operational value of the Edge Port parameter. The object
is initialized to the value of tnSapTlsStpRapidStart and is
set … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.24 |
| tnSapTlsStpAdminPointToPoint The value of the object tnSapTlsStpAdminPointToPoint
specifies the administrative point-to-point status of
the LAN segment attached to this tnSap. The value
'forceTrue' means t… | column | Enumeration | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.25 |
| tnSapTlsStpPortRole tnSapTlsStpPortRole indicates the current role of the
tnSap as defined by the Rapid Spanning Tree Protocol. | column | TN-SERV-MIBStpPortRole | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.26 |
| tnSapTlsStpAutoEdge tnSapTlsStpAutoEdge specifies whether this SAP
is enabled for auto-edge detection as defined by Rapid
Spanning Tree Protocol. | column | TN-TC-MIBTmnxEnabledDisabled | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.27 |
| tnSapTlsStpOperProtocol tnSapTlsStpOperProtocol indicates whether stp, rstp or
mstp is running on this SAP. If the protocol is not
enabled on this SAP, the value notApplicable is
returned. | column | TN-SERV-MIBStpProtocol | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.28 |
| tnSapTlsStpInRstBpdus The value of the object tnSapTlsStpInRstBpdus indicates
the number of Rapid Spanning Tree (RST) BPDUs received on
this SAP. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.29 |
| tnSapTlsStpPortNum The value of the object tnSapTlsStpPortNum specifies the
value of the port number field which is contained in the
least significant 12 bits of the 16-bit Port ID associated
with t… | column | Integer32 | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.3 |
| tnSapTlsStpOutRstBpdus The value of the object tnSapTlsStpOutRstBpdus indicates
the number of Rapid Spanning Tree (RST) BPDUs sent out on
this SAP. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.30 |
| tnSapTlsLimitMacMove When tnSapTlsLimitMacMove value is set to 'blockable'
the agent will monitor the MAC relearn rate on this
SAP, and it will block it when the re-learn rate
specified by tn… | column | TN-SERV-MIBTlsLimitMacMove | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.31 |
| tnSapTlsMacPinning The value of the object tnSapTlsMacPinning specifies whether
or not MAC address pinning is active on this SAP. The
value will be set by default to disabled. However for a
SAP that… | column | TN-TC-MIBTmnxEnabledDisabled | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.33 |
| tnSapTlsDiscardUnknownSource with the object tnSapTlsMacAddressLimit a limit can be
configured for the max number of MAC addresses that
will be learned on this SAP. When this limit is
reached, packet… | column | TN-TC-MIBTmnxEnabledDisabled | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.34 |
| tnSapTlsMvplsPruneState The value of tnSapTlsMvplsPruneState indicates the mVPLS
prune state of the SAP. The object will be set to
notApplicable if the SAP is not managed by a mVPLS. If
the SAP is manage… | column | TN-SERV-MIBMvplsPruneState | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.35 |
| tnSapTlsMvplsMgmtService The value of tnSapTlsMvplsMgmtService indicates the
service Id of the service where the STP instance is
running that is managing this SAP. This object is
only valid if tnSapTlsMvp… | column | TN-TC-MIBTmnxServId | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.36 |
| tnSapTlsMvplsMgmtPortId The value of tnSapTlsMvplsMgmtPortId indicates the SAP
port Id of the SAP in the mVPLS instance specified in
tnSapTlsMvplsMgmtService that is controlling this SAP.
This object is … | column | TN-TC-MIBTmnxPortID | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.37 |
| tnSapTlsMvplsMgmtEncapValue The value of tnSapTlsMvplsMgmtEncapValue indicates the
SAP Encap value of the SAP in the mVPLS instance
specified in tnSapTlsMvplsMgmtService that is
controlling this SAP. This ob… | column | TN-TC-MIBTmnxEncapVal | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.38 |
| tnSapTlsArpReplyAgent The value of the object tnSapTlsArpReplyAgent specifies
the status of the special ARP response mechanism in the
system for ARP requests destined to static or dynamic hosts
associa… | column | Enumeration | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.39 |
| tnSapTlsStpPathCost The value of the object tnSapTlsStpPathCost specifies the
contribution of this port to the path cost of paths
towards the spanning tree root which include this port. | column | Integer32 | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.4 |
| tnSapTlsStpException The value of the object tnSapTlsStpException indicates
whether an STP exception condition is present on this
Sap.
- none : no exception condition found.
- oneWayCommuniation : The… | column | TN-SERV-MIBStpExceptionCondition | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.40 |
| tnSapTlsAuthenticationPolicy The value of the object tnSapTlsAuthenticationPolicy specifies
which subscriber authentication policy must be applied when
a DHCP msg is received on the interface. The authent… | column | TN-TC-MIBTPolicyStatementNameOrEmpty | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.41 |
| tnSapTlsBpduTranslation The value of the object tnSapTlsBpduTranslation specifies
whether received L2 Protocol Tunnel pdu's are
translated before being sent out on this port or tnSap. | column | TN-SERV-MIBTlsBpduTranslation | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.43 |
| tnSapTlsStpRootGuard The value of the object tnSapTlsStpRootGuard specifies
whether this port is allowed to become STP root port.
It corresponds to the parameter 'restrictedRole' in 802.1Q.
If set, it… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.44 |
| tnSapTlsStpInsideRegion The value of the object tnSapTlsStpInsideRegion indicates
whether the network connected to the SAP is in the same
MST region. It corresponds to the parameter 'infoInternal'
in 802… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.45 |
| tnSapTlsEgressMcastGroup The value of the object tnSapTlsEgressMcastGroup specifies
the Egress Multicast Group this SAP belongs to. | column | TN-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.46 |
| tnSapTlsStpInMstBpdus The value of the object tnSapTlsStpInMstBpdus indicates
the number of Multiple Spanning Tree (MST) BPDUs received
on this SAP. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.47 |
| tnSapTlsStpOutMstBpdus The value of the object tnSapTlsStpOutMstBpdus indicates
the number of Multiple Spanning Tree (MST) BPDUs sent out
on this SAP. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.48 |
| tnSapTlsRestProtSrcMac The value of the object tnSapTlsRestProtSrcMac specifies
how the agent will handle relearn requests for protected
MAC addresses. When the value of this object is 'true'
requests t… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.49 |
| tnSapTlsStpRapidStart The value of the object tnSapTlsStpRapidStart specifies
whether Rapid Start is enabled on this SAP. When the value
is 'enabled' the Spanning Tree Protocol state transitions
on thi… | column | TN-TC-MIBTmnxEnabledDisabled | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.5 |
| tnSapTlsRestUnprotDstMac The value of the object tnSapTlsRestUnprotDstMac specifies
how the system will forward packets destined to an
unprotected MAC address. When the value of this object is
'true' pack… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.50 |
| tnSapTlsStpRxdDesigBridge The value of the object tnSapTlsStpRxdDesigBridge
indicates the designated Bridge Identifier in the last
BPDU which was received on this SAP. It identifies
which bridge is connec… | column | TN-SERV-MIBBridgeId | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.51 |
| tnSapTlsStpRootGuardViolation The value of the object tnSapTlsStpRootGuardViolation
indicates whether there is a root-guard violation at the
present time. This can only happen when tnSapTlsStpRootGuard
is set … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.52 |
| tnSapTlsShcvAction The value of the object tnSapTlsShcvAction
indicates whether any action should be triggered when
the connectivity check fails. | column | Enumeration | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.53 |
| tnSapTlsShcvSrcIp The value of the object tnSapTlsShcvSrcIp
specifies the source IP address used when doing the
connectivity check. The value 0.0.0.0 indicates that
no host IP address is specified. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.54 |
| tnSapTlsShcvSrcMac The value of the object tnSapTlsShcvSrcMac
specifies the MAC address used when doing the connectivity
check. The value 0:0:0:0:0:0 indicates that no host MAC
address is specified. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.55 |
| tnSapTlsShcvInterval The value of the object tnSapTlsShcvInterval specifies
the interval in minutes between connectivity checks.
Zero means no connectivity checking. | column | minutes Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.56 |
| tnSapTlsMvplsMgmtMsti The value of the object tnSapTlsMvplsMgmtMsti indicates the
MST-instance in the mVPLS instance specified in
tnSapTlsMvplsMgmtService that is controlling this SAP. A
value of 0 ind… | column | TN-SERV-MIBMstiInstanceIdOrZero | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.57 |
| tnSapTlsMacMoveNextUpTime The value of the object tnSapTlsMacMoveNextUpTime counts down
the time in seconds until a SAP that has been brought down
due to exceeding the TLS tnSvcTlsMacMoveMaxRate, tnSapOper… | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.58 |
| tnSapTlsMacMoveRateExcdLeft The value of the object tnSapTlsMacMoveRateExcdLeft
counts down the number of times this SAP can exceed the
TLS tnSvcTlsMacMoveMaxRate and still be automatically
brought up. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.59 |
| tnSapTlsStpBpduEncap The value of the object tnSapTlsStpBpduEncap specifies the
type of encapsulation used on BPDUs sent out and received
on this SAP. | column | Enumeration | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.6 |
| tnSapTlsRestProtSrcMacAction The value of the object tnSapTlsRestProtSrcMacAction
indicates the action to take whenever a relearn request
for a protected MAC is received on a restricted SAP.
When the value of… | column | Enumeration | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.60 |
| tnSapTlsL2ptForceBoundary The value of tnSapTlsL2ptForceBoundary specifies if
tnSapTlsL2ptTermination is enforced for its managed SAP's.
Setting the value of the object tnSapTlsL2ptForceBoundary of
a SAP i… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.61 |
| tnSapTlsLimitMacMoveLevel The value of the object tnSapTlsLimitMacMoveLevel
specifies the hierarchy in which SAPs are
blocked when a MAC-move limit is exceeded. When a MAC is
moving among multiple SAPs or … | column | TN-SERV-MIBTlsLimitMacMoveLevel | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.62 |
| tnSapTlsBpduTransOper The value of the object tnSapTlsBpduTransOper indicates
the operational bpdu encapsulation used for BPDU
translated frames. | column | Enumeration | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.63 |
| tnSapTlsDefMtnSapPolicy The value of tnSapTlsDefMtnSapPolicy specifies the
default Managed SAP policy to use to create
Managed SAPs when the response from the Radius
server does not specify a Managed SAP… | column | TN-TC-MIBTPolicyStatementNameOrEmpty | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.64 |
| tnSapTlsL2ptProtocols The value of the object tnSapTlsL2ptTermination specifies
which L2 Protocol Tunnel pdu's are terminated
on this port or tnSap. | column | TN-SERV-MIBL2ptProtocols | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.65 |
| tnSapTlsL2ptForceProtocols The value of the object tnSapTlsL2ptForceProtocols specifies
which L2 Protocol Tunnel pdu's must be terminated by
SAP's managed by this SAP.
This object is only relevant if the va… | column | TN-SERV-MIBL2ptProtocols | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.66 |
| tnSapTlsPppoeMtnSapTrigger The value of tnSapTlsPppoeMtnSapTrigger specifies whether
the receipt of PPPoE trigger packets on a VPLS SAP
with a tnSapSubType value of 'capture' will result in
a Radius authent… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.67 |
| tnSapTlsDhcpMtnSapTrigger The value of tnSapTlsDhcpMtnSapTrigger specifies whether
the receipt of DHCP trigger packets on this VPLS SAP
with a tnSapSubType value of 'capture' will result in
a Radius authen… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.68 |
| tnSapTlsMrpJoinTime The value of tnSapTlsMrpJoinTime specifies a timer value in
10ths of seconds which determines the maximum rate at
which attribute join messages can be sent on the SAP. | column | deci-seconds Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.69 |
| tnSapTlsStpPortState The value of the object tnSapTlsStpPortState indicates the
port's current state as defined by application of the
Spanning Tree Protocol. This state controls what action a
port tak… | column | TN-SERV-MIBTStpPortState | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.7 |
| tnSapTlsMrpLeaveTime The value of tnSapTlsMrpLeaveTime specifies a timer value in
10ths of seconds which determines the amount of time a
registered attribute is held in leave state before the
registra… | column | deci-seconds Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.70 |
| tnSapTlsMrpLeaveAllTime The value of tnSapTlsMrpLeaveAllTime specifies the a timer
value in 10ths of seconds which determines the frequency
where all attribute declarations on the SAP are all
refreshed. | column | deci-seconds Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.71 |
| tnSapTlsMrpPeriodicTime The value of tnSapTlsMrpPeriodicTime specifies a timer value
in 10ths of seconds which determines the frequency of
re-transmission of attribute declarations. | column | deci-seconds Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.72 |
| tnSapTlsMrpPeriodicEnabled The value of tnSapTlsMrpPeriodicEnabled specifies whether
re-transmission of attribute declarations is enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.73 |
| tnSapTlsPppoePolicy The value of tnSapTlsPppoePolicy specifies the PPPoE
policy (defined in TIMETRA-PPPOE-MIB::tmnxPppoePlcyTable)
to use to create Managed SAPs via PPPoE with PAP/CHAP
authentication… | column | TN-TC-MIBTNamedItemOrEmpty | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.74 |
| tnSapTlsArpMsapTrigger The value of tnSapTlsArpMsapTrigger specifies whether
the receipt of ARP trigger packets on this VPLS SAP
with a tnSapSubType value of 'capture' will result in
a Radius authentica… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.75 |
| tnSapTlsInTcBitBpdus The value of the object sapTlsInTcBitBpdus indicates the
number of BPDUs received on this SAP
with the Topology Change bit set. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.76 |
| tnSapTlsOutTcBitBpdus The value of the object sapTlsOutTcBitBpdus indicates the
number of BPDUs sent out this SAP
with the Topology Change bit set. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.77 |
| tnSapTlsStpDesignatedBridge The value of the object tnSapTlsStpDesignatedBridge
indicates the Bridge Identifier of the bridge which this
port considers to be the Designated Bridge for this port's
segment. | column | TN-SERV-MIBBridgeId | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.8 |
| tnSapTlsShcvRetryTimeout The value of the object sapTlsShcvRetryTimeout specifies
the timeout in seconds before a connectivity check
retransmission. | column | seconds Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.81 |
| tnSapTlsShcvRetryCount The value of the object sapTlsShcvRetryCount specifies
the number of connectivity check retransmissions.
Setting the value to n specifies that, for any given host,
… | column | Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.82 |
| tnSapTlsFdbTableSizeProfId deprecated The value of the object tnSapTlsFdbTableSizeProfId specifies
the row index in the tnPacketSwitchFdbTableSizeProfileTable
corresponding to this Fdb Table Size Profile, or one if no… | column | TN-TC-MIBTFdbTableSizeProfileID | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.83 |
| tnSapTlsStpDesignatedPort The value of the object tnSapTlsStpDesignatedPort indicates
the Port Identifier of the port on the Designated Bridge
for this port's segment. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.6.1.2.4.3.3.1.9 |