RAPID-CITY-VSP Table View

Management access policy table.  This table is 
used to permit or deny access to this device via
the specified source Id.

rcSysAccessPolicyEntry row .1.3.6.1.4.1.2272.1.1.61.1

An access policy table entry.

Indexes

rcSysAccessPolicyId

Column	Syntax	OID
rcSysAccessPolicyId Policy Id.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.2272.1.1.61.1.1
rcSysAccessPolicyName Name of this policy.	OctetStringr/w Constraints: range: 0-15	.1.3.6.1.4.1.2272.1.1.61.1.2
rcSysAccessPolicyPolicyEnable Indicate whether this policy is currently active.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.1.61.1.3
rcSysAccessPolicyMode Used to indicate whether a packet having a source IP address that matches this entry should be permitted to enter the device or denied access.	Enumerationr/w Enumerated Values: 1 allow 2 deny	.1.3.6.1.4.1.2272.1.1.61.1.4
rcSysAccessPolicyService Is represented as bitset to indicate which protocol this entry should be applied to. Value is one of multiple(logical 'OR') of the following values: telnet(1), snmp(2), tftp(4), ftp(8), …	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.1.61.1.5
rcSysAccessPolicyPrecedence Used to indicate the precedence of this policy. The Lower the number the higher the precedence.	Integer32r/w Constraints: range: 1-128	.1.3.6.1.4.1.2272.1.1.61.1.6
rcSysAccessPolicyTrustedHostUserName User name on the trusted host performing a rlogin into the device.	OctetStringr/w Constraints: range: 0-30	.1.3.6.1.4.1.2272.1.1.61.1.10
rcSysAccessPolicyAccessLevel Access level of trusted host.	Enumerationr/w Enumerated Values: 1 readOnly 2 readWrite 3 readWriteAll	.1.3.6.1.4.1.2272.1.1.61.1.11
rcSysAccessPolicyLog Used to indicate whether logging should be performed if this policy was applied.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.1.61.1.12
rcSysAccessPolicyUsage Usage Counter	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.1.61.1.13
rcSysAccessPolicyRowStatus Used to create/delete an entry	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.1.61.1.14
rcSysAccessPolicyAccessStrict Used to restrict the access level specified in the system access policy table to exactly the same access level as specified by user. If TRUE then only the access level in the policy table is allowed access. If FALSE, th…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.1.61.1.15
rcSysAccessPolicyNetInetAddrType Source network Inet Address Type.	Enumerationr/w Enumerated Values: 0 any 1 ipv4 2 ipv6	.1.3.6.1.4.1.2272.1.1.61.1.16
rcSysAccessPolicyNetInetAddress Source network Inet Address (prefix/network).	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.1.61.1.17
rcSysAccessPolicyNetInetAddrPrefixLen Source network Inet Address Prefix-Length/Mask.	INET-ADDRESS-MIBInetAddressPrefixLengthr/w Type Constraints: range: 0..2040	.1.3.6.1.4.1.2272.1.1.61.1.18
rcSysAccessPolicyTrustedHostInetAddress Trusted Inet address of host performing a rlogin into the device.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.1.61.1.19

The trap sender table (0 to 25 entries).  This
table lists the addresses of Network Management
Stations and the Source Address that should receive 
trap messages from this entity when an exception 
condition occurs.

rcSysTrapSenderEntry row .1.3.6.1.4.1.2272.1.1.62.1

A trap sender table entry.

Indexes

rcSysTrapSenderRecvAddress

Column	Syntax	OID
rcSysTrapSenderRecvAddress IP address for trap receiver.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.1.62.1.1
rcSysTrapSenderSrcAddress IP address for trap sender.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.1.62.1.2

DNS serever list table used to store the 
details of the DNS server configured.

rcSysDnsServerListEntry row .1.3.6.1.4.1.2272.1.1.64.1

table entry.

Indexes

rcSysDnsServerListType

Column	Syntax	OID
rcSysDnsServerListType Type of the DNS server	Enumeration Enumerated Values: 0 primary 1 secondary 2 tertiary	.1.3.6.1.4.1.2272.1.1.64.1.1
rcSysDnsServerListStatus Status of DNS server	Enumeration Enumerated Values: 0 active 1 in-active	.1.3.6.1.4.1.2272.1.1.64.1.3
rcSysDnsServerListRequestCount Number of request send to this server	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.1.64.1.4
rcSysDnsServerListSuccessCount Number of request send to this server which are successful	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.1.64.1.5
rcSysDnsServerListRowStatus Used to create/delete DNS server entries in rcSysDnsServerListTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.1.64.1.6
rcSysDnsServerListAddressType The address type of DNS Server.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.1.64.1.7
rcSysDnsServerListAddress The address of the DNS Server	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.1.64.1.8

DNS Host table.

rcSysDnsHostEntry row .1.3.6.1.4.1.2272.1.1.65.1

table entry.

Indexes

rcSysDnsHostData

Column	Syntax	OID
rcSysDnsHostData Host Name or Host IP Address.	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.2272.1.1.65.1.1
rcSysDnsHostName Host Name.	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.2272.1.1.65.1.2
rcSysDnsHostSourceobsolete DNS Server IP or /etc/host file.	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.2272.1.1.65.1.4
rcSysDnsHostAddressType Address Type of the Host.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.2272.1.1.65.1.5
rcSysDnsHostAddress Address of the Host.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.1.65.1.6

Management Force-msg Control table. This table is used to
          
specify the pattern for Force-msg Control

rcSysFrcMsgControlEntry row .1.3.6.1.4.1.2272.1.1.94.1

A Force-msg Control table entry.

Indexes

rcSysFrcMsgControlPatternId

Column	Syntax	OID
rcSysFrcMsgControlPatternId Pattern Id.	Integer32 Constraints: range: 1-32	.1.3.6.1.4.1.2272.1.1.94.1.1
rcSysFrcMsgControlPattern Pattern for filtering the force-msg for msg control	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.2272.1.1.94.1.2
rcSysFrcMsgControlRowStatus Used to create/delete an entry	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.1.94.1.3

SNMP group list for access policy

rcSysAccPolSnmpGrpEntry row .1.3.6.1.4.1.2272.1.1.95.1

The table entry which covers the groups under snmp service.

Indexes

rcSysAccessPolicyId rcSysAccPolSnmpGrpName rcSysAccPolSnmpGrpModel

Column	Syntax	OID
rcSysAccPolSnmpGrpName The snmp-v3 group name	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.2272.1.1.95.1.1
rcSysAccPolSnmpGrpModel The snmp model	SNMP-FRAMEWORK-MIBSnmpSecurityModel Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.2272.1.1.95.1.2
rcSysAccPolSnmpGrpRowStatus Row status	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.1.95.1.3

A list of Virtual LAN entries. The number of entries
is given by rcVlanNumVlans.

rcVlanEntry row .1.3.6.1.4.1.2272.1.3.2.1

Entry containing configuration information for a
particular Virtual LAN.

The relationship between the various port sets in a
VLAN Entry are :

o The set of ports defined by PortMembers must be…

Indexes

rcVlanId

Column	Syntax	OID
rcVlanId A value that uniquely identifies the Virtual LAN associated with this entry. This value corresponds to the lower 12 bits in the IEEE 802.1Q VLAN Tag.	RcVlanIdOrNone Type Constraints: range: 1..4084	.1.3.6.1.4.1.2272.1.3.2.1.1
rcVlanName An administratively-assigned name for this VLAN.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.3.2.1.2
rcVlanColor An administratively-assigned color code for this VLAN. The value of this object is used by the VLAN Manager GUI tool to select a color when it draws this VLAN on the screen.	Integer32r/w Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.3.2.1.3
rcVlanIfIndex When rcVlanRoutingEnable is set to true(1), this value indicates the 'logical' ifIndex assigned to this VLAN. Otherwise, this value is meaningless and should be set to zero.	InterfaceIndex	.1.3.6.1.4.1.2272.1.3.2.1.6
rcVlanAction VLAN related actions.	Enumerationr/w Enumerated Values: 1 none 2 flushMacFdb 3 flushArp 4 flushIp 5 flushDynMemb 6 all 7 flushSnoopMemb 8 triggerRipUpdate 9 flushSnoopMRtr 10 flushIpRsmltEdgePeer	.1.3.6.1.4.1.2272.1.3.2.1.7
rcVlanResult The result from the last VLAN action.	Enumeration Enumerated Values: 1 none 2 inProgress 3 success 4 fail	.1.3.6.1.4.1.2272.1.3.2.1.8
rcVlanStgId Indicates the Spanning Tree Group (STG) used by this VLAN to determine the state of its ports. If this VLAN is not associated with any STG, this value should be set to zero.	Integer32r/w Constraints: range: 0-128	.1.3.6.1.4.1.2272.1.3.2.1.9
rcVlanPortMembers The set of ports that are members (static or dynamic) of this VLAN.	PortSetr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.3.2.1.11
rcVlanActiveMembers The set of ports that are currently active in this VLAN. Active ports include all static ports and any dynamic ports where the VLAN policy was met.	PortSet Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.3.2.1.12
rcVlanStaticMembers The set of ports that are static members of this VLAN. A static member of a VLAN is always active and is never aged out.	PortSetr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.3.2.1.13
rcVlanNotAllowToJoin The set of ports that are not allowed to become members of this VLAN.	PortSetr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.3.2.1.14
rcVlanProtocolId The protocol identifier of this VLAN. This value is meaningful only if rcVlanType is equal to byProtocolId(3). For other VLAN types it should have the value none(0).	Enumerationr/w Enumerated Values: 0 none 1 ip 2 ipx802dot3 3 ipx802dot2 4 ipxSnap 5 ipxEthernet2 6 appleTalk 7 decLat 8 decOther 9 sna802dot2 10 snaEthernet2 11 netBios 12 xns 13 vines 14 ipV6 15 usrDefined 16 rarp 17 pPPoE	.1.3.6.1.4.1.2272.1.3.2.1.15
rcVlanSubnetAddr The IP subnet address of this VLAN. This value is meaningful only if rcVlanType is equal to byIpSubnet(2). For other VLAN types it should have the value 0.0.0.0.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.3.2.1.16
rcVlanSubnetMask The IP subnet mask of this VLAN. This value is meaningful only if rcVlanType is equal to byIpSubnet(2). For other VLAN types it should have the value 0.0.0.0.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.3.2.1.17
rcVlanAgingTime The timeout period (in seconds) used for aging out dynamic members of this VLAN. This field is only relevant for policy-based VLANs.	Integer32r/w Constraints: range: 0-0 range: 10-1000000	.1.3.6.1.4.1.2272.1.3.2.1.18
rcVlanMacAddress The MAC address assigned to the virtual router interface of this VLAN. This field is meaningful only if rcVlanRoutingEnable is equal to true(1).	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.3.2.1.19
rcVlanRowStatus Used to create/delete entries in the rcVlanTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.3.2.1.20
rcVlanUserDefinedPid When rcVlanProtocolId is set to usrDefined(15) in a protocol-based VLAN, this field represents the 16-bit user defined protocol identifier.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.3.2.1.26
rcVlanProtocolIds Bitfield of protocol ids.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.3.2.1.28
rcVlanTosValue Tos value.	Integer32r/w Constraints: range: 1-64	.1.3.6.1.4.1.2272.1.3.2.1.34
rcVlanEncap This is the encapsulation type for userdefined protocol based vlans. This is not meaningful for other types of vlan. The default value is null.	Enumerationr/w Enumerated Values: 1 ethernet2 2 llc 3 snap 4 all 5 notapplicable	.1.3.6.1.4.1.2272.1.3.2.1.35
rcVlanFdbAging The timeout period (in seconds) used for aging out fdb entries of this VLAN.	Integer32r/w Constraints: range: 0-0 range: 10-1000000	.1.3.6.1.4.1.2272.1.3.2.1.37
rcVlanOspfPassivePortMember The set of ports in the vlan that are designated as ospf passive	PortSetr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2272.1.3.2.1.44
rcVlanNlbMode NLB mode set on a VLAN.	Enumerationr/w Enumerated Values: 0 nlbAdminDisable 1 nlbAdminIgmpMcast 2 nlbAdminMulticast 4 nlbAdminUnicast	.1.3.6.1.4.1.2272.1.3.2.1.46
rcVlanVrfId Indicates the Virtual Router to which the VLAN belongs	VrfIdentifierr/w Type Constraints: range: 0..512	.1.3.6.1.4.1.2272.1.3.2.1.48
rcVlanVrfName The Name of the Virtual Router to which the VLAN belongs	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.3.2.1.49
rcVlanNodalMepList List of nodal Meps assigned to this vlan. A mep consists of Domain Name, Association name and Mep Id separated by '.'. Each meps is separated by ',': <md1>.<ma1>.<mepid1>,<md2>.<ma2>.<mepid2>,... The maximum number of n…	OctetStringr/w Constraints: range: 0-408	.1.3.6.1.4.1.2272.1.3.2.1.54
rcVlanNumOfNodalMep Number of nodal meps assigned to this vlan	Integer32 Constraints: range: 0-8	.1.3.6.1.4.1.2272.1.3.2.1.55
rcVlanNodalMipLevelList List of nodal Mip levels assigned to this vlan that allows Mip functionality to be enabled on a per level per vlan basis. A mip level is represented by an integer ranging from 0 to 7. The mip levels are separated by ','…	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.2272.1.3.2.1.56
rcVlanNumOfNodalMipLevel Number of nodal mip levels assigned to this vlan that allows MIP functionality to be enabled on a per level per vlan basis.	Integer32 Constraints: range: 0-8	.1.3.6.1.4.1.2272.1.3.2.1.57
rcVlanPlsbIsid Plsb i-sid number assigned to a C-vlan. Default 0 value indicates that no i-sid has been assinged.	Integer32r/w Constraints: range: 0-16777215	.1.3.6.1.4.1.2272.1.3.2.1.61

A table used to maintain VLAN port related 
information.

rcVlanPortEntry row .1.3.6.1.4.1.2272.1.3.3.1

Entry containing VLAN information regarding a
particular port.

Indexes

rcVlanPortIndex

Column	Syntax	OID
rcVlanPortIndex An unique index used to identify a particular port in the system. This index is equal to the ifIndex of the port.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.3.3.1.1
rcVlanPortNumVlanIds Used to indicate the number of VLAN IDs that are stored in the rcVlanPortVlanIds variable.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.3.3.1.2
rcVlanPortType The type of port: access(1) or trunk(2).	Enumerationr/w Enumerated Values: 1 access 2 trunk	.1.3.6.1.4.1.2272.1.3.3.1.4
rcVlanPortDiscardTaggedFrames A flag used to determine how to process tagged frames received on this access port. When the flag is set, these frames are discarded by the forwarding process. When the flag is reset, these frames are processed normall…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.3.3.1.5
rcVlanPortDiscardUntaggedFrames A flag used to determine how to process untagged frames received on this trunk port. When the flag is set, these frames are discarded by the forwarding process. When the flag is reset, these frames are assigned to the…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.3.3.1.6
rcVlanPortDefaultVlanId The VLAN ID assigned to untagged frames received on this trunk port. This field is meaningless when the port is not a trunk port.	Integer32r/w Constraints: range: 0-4084	.1.3.6.1.4.1.2272.1.3.3.1.7
rcVlanPortPerformTagging Enable/disable the port on the current vlan to perform tagging on the incoming and outgoing traffic.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.3.3.1.8
rcVlanPortLoopDetect Enable/disable loop detection on this port	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.3.3.1.10
rcVlanPortFirstPortInOpid This value gives the IfIndex of the first port in the octapid. This value is used to generate an error message when changing port type from normal to uni/nni and viceversa	InterfaceIndex	.1.3.6.1.4.1.2272.1.3.3.1.11
rcVlanPortLastPortInOpid This value gives the IfIndex of the first port in the octapid. This value is used to generate an error message when changing port type from normal to uni/nni and viceversa	InterfaceIndex	.1.3.6.1.4.1.2272.1.3.3.1.12
rcVlanPortUntagDefaultVlan enable/disable Egress Tagging on the Default Vlan of the port.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.3.3.1.13
rcVlanPortLoopDetectAction This value is used to specify the action which needs to be taken once a loop is detected on a specific port. VlanBlock is not supported in VSP9000.	Enumerationr/w Enumerated Values: 1 portDown 2 vlanBlock 3 macDiscard	.1.3.6.1.4.1.2272.1.3.3.1.14
rcVlanPortArpDetect Enable/disable Arp detection on this port	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.3.3.1.15
rcVlanPortSpoofDetect Enable/disable spoof detection on this port	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.3.3.1.16
rcVlanPortClassificationSubnet Enable/disable Subnet based Vlan packets on this port.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.3.3.1.18
rcVlanPortClassificationProtocol Enable/disable Protocol based Vlan packets on this port.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.3.3.1.19
rcVlanPortClassificationPrec Sets the precedence for vlan classification. A value of 1 puts classification of packets to source mac vlans ahead of subnet based vlans. A value of 2 puts subnet based vlans ahead of source mac vlans. Classification…	Enumerationr/w Enumerated Values: 1 sourceMac 2 subnet	.1.3.6.1.4.1.2272.1.3.3.1.20
rcVlanPortVlanIdList This bitfield is used to identify which VLANs this port is assigned to. Each VLAN ID is stored as a bit. The most-significant (left-most) bit represents Vlan Id 1.	OctetStringr/w Constraints: range: 0-512	.1.3.6.1.4.1.2272.1.3.3.1.21
rcVlanPortClassificationSourceMac Enable/disable SourceMac based Vlan packets on this port.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.3.3.1.22

A table used to maintain MAC addresses assigned 
to a particular VLAN by MAC address.

rcVlanMacEntry row .1.3.6.1.4.1.2272.1.3.4.1

Entry containing VLAN information regarding a
particular port.

Indexes

rcVlanMacVlanId rcVlanMacAddr

Column	Syntax	OID
rcVlanMacVlanId An unique index used to identify a VLAN (by MAC address) in the system.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.3.4.1.1
rcVlanMacAddr An unique index used to identify a MAC address assigned to a particular VLAN.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.3.4.1.2
rcVlanMacRowStatus Row status for this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.3.4.1.3

A list of Vlans the port belongs to
and the 
corresponding loop detected status.

rcVlanLoopDetectedEntry row .1.3.6.1.4.1.2272.1.3.10.1

Loop-Detected Entry.

Indexes

rcVlanLoopDetectedPortIndex rcVlanLoopDetectedVlanId

Column	Syntax	OID
rcVlanLoopDetectedPortIndex Port Number.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.3.10.1.1
rcVlanLoopDetectedVlanId Gives the VlanId to which the port belongs.	Integer32 Constraints: range: 0-4084	.1.3.6.1.4.1.2272.1.3.10.1.2
rcVlanLoopDetectedValue Gives the Loop Detected status of the port in a vlan.	Enumeration Enumerated Values: 0 no 1 yes	.1.3.6.1.4.1.2272.1.3.10.1.3

A table used to maintain DSAP/SSAP values 
assigned to a sna802dot2 or userdefined vlan.

rcVlanDsapSsapEntry row .1.3.6.1.4.1.2272.1.3.11.1

An entry in the rcVlanDsapSsap table.

Indexes

rcVlanDsapSsapVlanId rcVlanDsapSsapPid

Column	Syntax	OID
rcVlanDsapSsapVlanId A unique index to identify a vlan.	Integer32 Constraints: range: 0-4084	.1.3.6.1.4.1.2272.1.3.11.1.1
rcVlanDsapSsapPid Values of DSAP/SSAP assigned to a particular vlan.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.3.11.1.2
rcVlanDsapSsapRowStatus Row Status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.3.11.1.3

A list of Vlans the port belongs to and the 
corresponding loop detected status.

rcVlanNewLoopDetectedEntry row .1.3.6.1.4.1.2272.1.3.12.1

Loop-Detected Entry.

Indexes

rcVlanNewLoopDetectedPortIndex rcVlanNewLoopDetectedVlanId rcVlanNewLoopDetectedMac

Column	Syntax	OID
rcVlanNewLoopDetectedPortIndex Port Number.	InterfaceIndex	.1.3.6.1.4.1.2272.1.3.12.1.1
rcVlanNewLoopDetectedVlanId Gives the VlanId to which the port belongs.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.3.12.1.2
rcVlanNewLoopDetectedMac Mac address	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.3.12.1.3
rcVlanNewLoopDetectedAction This value is used to specify the action which needs to be taken once a loop is detected on a specific port.	Enumeration Enumerated Values: 1 portDown 2 vlanBlock 3 macDiscard	.1.3.6.1.4.1.2272.1.3.12.1.4
rcVlanNewLoopDetectedSmltRemote A MAC address indicate for remote learnt, either local or remote.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.3.12.1.5

Table for the zones available on the chassis

rcChasFanZoneEntry row .1.3.6.1.4.1.2272.1.4.7.2.1

Contains information regarding a zone unit

Indexes

rcChasFanZoneType

Column	Syntax	OID
rcChasFanZoneType Type of the fan zone.	Enumeration Enumerated Values: 1 front 2 rear	.1.3.6.1.4.1.2272.1.4.7.2.1.1
rcChasFanZoneMode Functional mode of the fan zone.	Enumeration Enumerated Values: 1 normal 2 alarm	.1.3.6.1.4.1.2272.1.4.7.2.1.2
rcChasFanZoneModeStatus Bit set indicates the alarm type(s)	Bits Enumerated Values: 0 normal 1 fanFault 2 alarmThresholdExceeded	.1.3.6.1.4.1.2272.1.4.7.2.1.3
rcChasFanZoneAlarmTimer Alarm timer indicates the remaining time before system checks and shutdown module when fan is in the alarm state. Zero means the fan i snot in an alarm state	secondsSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.4.7.2.1.4
rcChasFanZoneTemperature Highest temperature measured in celsius degree from all the sensors (inlet and outlet) in the zone	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.4.7.2.1.5
rcChasFanZoneTray1LedColor Led color indicate fans operation status on tray off: Indicates no tray or power off. green: Indicates all fans are operational in a tray. red: Front Zone Tray: more than one fans in a tray are not opertional. …	Enumeration Enumerated Values: 1 off 2 green 3 red 4 amber	.1.3.6.1.4.1.2272.1.4.7.2.1.6
rcChasFanZoneTray2LedColor Led color indicate fans operation status on tray off: Indicates no tray or power off. green: Indicates all fans are operational in a tray. red: Front Zone Tray: more than one fans in a tray are not opertional. …	Enumeration Enumerated Values: 1 off 2 green 3 red 4 amber	.1.3.6.1.4.1.2272.1.4.7.2.1.7

This table contains information for 
all the fans on the chassis

rcChasFanInfoEntry row .1.3.6.1.4.1.2272.1.4.7.3.1

Contains information regarding a fan unit

Indexes

rcChasFanZoneType rcChasFanInfoTray rcChasFanInfoFan

Column	Syntax	OID
rcChasFanInfoTray Number of trays per zone in chassis	Integer32 Constraints: range: 1-2	.1.3.6.1.4.1.2272.1.4.7.3.1.1
rcChasFanInfoFan Number of fans per tray	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.2272.1.4.7.3.1.2
rcChasFanInfoExpectedSpeed The administrative setting for the fan speed low: Low speed set by software medium: Medium speed set by software high: High speed set by software hardware: Speed controlled by hardware	Enumeration Enumerated Values: 1 low 2 medium 3 high 4 hardware	.1.3.6.1.4.1.2272.1.4.7.3.1.3
rcChasFanInfoOperSpeed Actual speed of the fan	Enumeration Enumerated Values: 1 low 2 medium 3 high 4 hardware	.1.3.6.1.4.1.2272.1.4.7.3.1.4
rcChasFanInfoStatus The operational status of the fan. Details below: ok(1): Fan operating under normal condition(s) faulty(2): Fan not operating as expected	Enumeration Enumerated Values: 1 ok 2 faulty	.1.3.6.1.4.1.2272.1.4.7.3.1.5

This table contains information about power 
supplies.

rcChasPowerSupplyEntry row .1.3.6.1.4.1.2272.1.4.8.1.1

Contains information regarding a power supply
unit.

Indexes

rcChasPowerSupplyId

Column	Syntax	OID
rcChasPowerSupplyId The power supply Id.	Integer32 Constraints: range: 1-6	.1.3.6.1.4.1.2272.1.4.8.1.1.1
rcChasPowerSupplyOperStatus Actual status of the power supply: - unknown(1) - status can not be determined. - empty(2) - power supply not installed. - up(3) - present and supplying power. - down(4) - present, but failure indicated.	Enumeration Enumerated Values: 1 unknown 2 empty 3 up 4 down	.1.3.6.1.4.1.2272.1.4.8.1.1.2

This table contains detailed information about
power supplies.

rcChasPowerSupplyDetailEntry row .1.3.6.1.4.1.2272.1.4.8.2.1

Contains detailed info regarding a power supply
unit.

Indexes

rcChasPowerSupplyDetailId

Column	Syntax	OID
rcChasPowerSupplyDetailId The power supply Id.	Integer32 Constraints: range: 1-6	.1.3.6.1.4.1.2272.1.4.8.2.1.1
rcChasPowerSupplyDetailType The power supply type.	Enumeration Enumerated Values: 0 unknown 1 ac 2 dc	.1.3.6.1.4.1.2272.1.4.8.2.1.2
rcChasPowerSupplyDetailSerialNumber The power supply serial number.	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.2272.1.4.8.2.1.3
rcChasPowerSupplyDetailHardwareRevision The hardware revision of the power supply.	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.2272.1.4.8.2.1.4
rcChasPowerSupplyDetailPartNumber The power supply part number.	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.2272.1.4.8.2.1.5
rcChasPowerSupplyDetailDescription The detail description of power supply.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.4.8.2.1.6
rcChasPowerSupplyDetailInputLineVoltage The power supply Input Line voltage.	Enumeration Enumerated Values: 0 unknown 1 low110v 2 high220v 3 minus48v	.1.3.6.1.4.1.2272.1.4.8.2.1.8
rcChasPowerSupplyDetailOutputWatts The output power of this power supply	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.4.8.2.1.10

A table that contains information about the 
cards in this chassis.  For those slots that 
do not contain a physical card, the table may 
 be implemented to contain a conceptual row 
with the type of physical module set to 
 'chasCardEmpty', or it may be implemented to 
 have no conceptual row instance.

rcCardEntry row .1.3.6.1.4.1.2272.1.4.9.1.1

Card attributes

Indexes

rcCardIndex

Column	Syntax	OID
rcCardIndex A unique value for each module within the chassis. This value is determined by the chassis slot number where the module is inserted. Valid entries are 1 to the value of rcChasNumSlots	Integer32 Constraints: range: 1-26	.1.3.6.1.4.1.2272.1.4.9.1.1.1
rcCardType Used to indicate the card type. The value returned is defined by the description in rc2kCardTable.	Enumeration Enumerated Values: 1 other 1073873665 cbCP-CSC 1075708672 cbSF3200 1075712768 cbSF9600 1075970864 cb48x1000BaseTX 1075974960 cb48x1000BaseTXPOE 1077044016 cb48x1000SFP 1077109528 cb24x10GBaseSFP 1077109552 cb48x10GBaseSFP 1084097280 cbACPowerSupply 1085145856 cbCPFanTray 1085149952 cbIOFanTray 1090388736 cbMidplane-28 1091437312 cbAUX	.1.3.6.1.4.1.2272.1.4.9.1.1.2
rcCardOxateCpld Oxate CPLD version for CP card	OctetString Constraints: range: 0-8	.1.3.6.1.4.1.2272.1.4.9.1.1.9
rcCardOxideFpga Oxide FGPA version for CP card	OctetString Constraints: range: 0-8	.1.3.6.1.4.1.2272.1.4.9.1.1.10
rcCardCatskillFpga Catskill FPGA version for CP card	OctetString Constraints: range: 0-8	.1.3.6.1.4.1.2272.1.4.9.1.1.11
rcCardQE QE version for CP card	OctetString Constraints: range: 0-8	.1.3.6.1.4.1.2272.1.4.9.1.1.12
rcCardK2Fpga K2 FPGA version for IO card	OctetString Constraints: range: 0-8	.1.3.6.1.4.1.2272.1.4.9.1.1.13
rcCardIoDateDC IO Date DC CPLD for IO card	OctetString Constraints: range: 0-8	.1.3.6.1.4.1.2272.1.4.9.1.1.14
rcCardIoDateBB IO Date BaseBoard CPLD for IO card	OctetString Constraints: range: 0-8	.1.3.6.1.4.1.2272.1.4.9.1.1.15
rcCardIoPimCpld IO PIM CPLD for IO card	OctetString Constraints: range: 0-8	.1.3.6.1.4.1.2272.1.4.9.1.1.16
rcCardLed0Cpld LED0 CPLD for IO card	OctetString Constraints: range: 0-8	.1.3.6.1.4.1.2272.1.4.9.1.1.17
rcCardLed1Cpld LED1 CPLD for IO card	OctetString Constraints: range: 0-8	.1.3.6.1.4.1.2272.1.4.9.1.1.18
rcCardZagrosFpga Zagros FPGA for IO card	OctetString Constraints: range: 0-8	.1.3.6.1.4.1.2272.1.4.9.1.1.19
rcCardRsp RSP for IO card	OctetString Constraints: range: 0-8	.1.3.6.1.4.1.2272.1.4.9.1.1.20
rcCardBcmMac BCM Mac for IO card	OctetString Constraints: range: 0-8	.1.3.6.1.4.1.2272.1.4.9.1.1.21
rcCardPhosphideFpga Phosphide FPGA for IO card	OctetString Constraints: range: 0-8	.1.3.6.1.4.1.2272.1.4.9.1.1.22
rcCardSulfideFpga Sulfide FPGA for IO card	OctetString Constraints: range: 0-8	.1.3.6.1.4.1.2272.1.4.9.1.1.23
rcCardFluorateCpld Fluorate Cpld for SF card	OctetString Constraints: range: 0-8	.1.3.6.1.4.1.2272.1.4.9.1.1.24
rcCardBme BME for SF card	OctetString Constraints: range: 0-8	.1.3.6.1.4.1.2272.1.4.9.1.1.25

Port table

rcPortEntry row .1.3.6.1.4.1.2272.1.4.10.1.1

Entry containing info. for a particular port

Indexes

rcPortIndex

Column	Syntax	OID
rcPortIndex An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2.	InterfaceIndex	.1.3.6.1.4.1.2272.1.4.10.1.1.1
rcPortType Port type	Enumeration Enumerated Values: 0 other 1 rc100BaseTX 2 rc100BaseT2 3 rc100BaseF 4 rc1000BaseF 5 rc1000BaseDualF 6 rc10BaseF 7 rcPosMMF 8 rcPosSMF 9 rcAtm 10 rcGbicLx 11 rcGbicSx 12 rcGbicXd 13 rcGbicCu 14 rcGbicOther 15 rcOc3cSM 16 rcOc3cMM 17 rcOc3cCOPPER 18 rcOc12cSM 19 rcOc12cMM 20 rcDs3 21 rcE3 22 rcGbicNone 23 rc1000BaseT 24 rcGbicZx 25 rcOc3cAtmSM 26 rcOc3cAtmMM 27 rcOc12cAtmSM 28 rcOc12cAtmMM 29 rcOc3cPosSM 30 rcOc3cPosMM 31 rcOc12cPosSM 32 rcOc12cPosMM 33 rcGbic1470 34 rcGbic1490 35 rcGbic1510 36 rcGbic1530 37 rcGbic1550 38 rcGbic1570 39 rcGbic1590 40 rcGbic1610 41 rcRmon 42 rcGbic1470APD 43 rcGbic1490APD 44 rcGbic1510APD 45 rcGbic1530APD 46 rcGbic1550APD 47 rcGbic1570APD 48 rcGbic1590APD 49 rcGbic1610APD 50 rc10GbLW 51 rc10GbLR 53 rc1000BaseTX 55 rcGbicBx 56 rc10GbNone 58 rc10GbSR 59 rc10GbSW 60 rc10GbER 61 rc10GbEW 62 rc10GbOther 63 rc1000BaseTXPOE 64 rc10GbZR 65 rc10GbZW 66 rcGbic1310Xd 67 rcGbic1470Xd 68 rcGbic1490Xd 69 rcGbic1510Xd 70 rcGbic1530Xd 71 rcGbic1550Xd 72 rcGbic1570Xd 73 rcGbic1590Xd 74 rcGbic1610Xd 75 rcGbic1470Zx 76 rcGbic1490Zx 77 rcGbic1510Zx 78 rcGbic1530Zx 79 rcGbic1550Zx 80 rcGbic1570Zx 81 rcGbic1590Zx 82 rcGbic1610Zx 83 rcGbic1690Zx 84 rcGbic1310Bx 85 rcGbic1490Bx 86 rcGbicEx 87 rcGbic850Sx 88 rcGbic1200Lx 89 rcGbic1300Lx 90 rcGbic1310Lx 91 rcGbic1490Lx 92 rcGbic1550Lx 93 rcGbic1550Ex 94 rc1GbFD 95 rc10GbLRM 96 rc10GbDWDMR 97 rc10GbDWDMW 98 rc100BaseSX 99 rc100BaseLX 100 rc100BaseFX 101 rc100BaseBX 102 rc100BaseZX 103 rcGbicMTRJ 104 rcGbic1300SeFx 105 rcGbicCx 106 rc10GbCX	.1.3.6.1.4.1.2272.1.4.10.1.1.2
rcPortAction Port related actions.	Enumerationr/w Enumerated Values: 1 none 2 flushMacFdb 3 flushArp 4 flushIp 5 flushAll 6 triggerRipUpdate 7 clearLoopDetectAlarm	.1.3.6.1.4.1.2272.1.4.10.1.1.6
rcPortResult Result from the last Vlan action.	Enumeration Enumerated Values: 1 none 2 inProgress 3 success 4 fail	.1.3.6.1.4.1.2272.1.4.10.1.1.7
rcPortAutoNegotiate Indicate whether this port enabled for auto negotiations or not.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.11
rcPortAdminDuplex Indicates the port duplex type	Enumerationr/w Enumerated Values: 1 half 2 full	.1.3.6.1.4.1.2272.1.4.10.1.1.12
rcPortOperDuplex Indicate this port's current duplex value.	Enumeration Enumerated Values: 1 half 2 full	.1.3.6.1.4.1.2272.1.4.10.1.1.13
rcPortAdminSpeed Indicate this port's speed.	Enumerationr/w Enumerated Values: 0 none 1 mbps10 2 mbps100 3 mbps1000 4 mbps10000	.1.3.6.1.4.1.2272.1.4.10.1.1.14
rcPortOperSpeed Indicate this port's current speed value.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.4.10.1.1.15
rcPortMltId Indicate which multi-link trunk (MLT) this port is assigned to. If this port is not associated with any MLT, this value will be set to zero(0).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2272.1.4.10.1.1.16
rcPortLocked Indicate whether this port is locked.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.17
rcPortAutoNegotiationSupported Indicate whether this port can support auto-negotiation.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.18
rcPortSingleRoutablePort Indicate whether this port is a single routable port. If this value is true, the port functions like a traditional router port.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.19
rcPortUnknownMacDiscard If rcUnknownMacDiscard is set to True, then a packet with an unknown source MAC address is dropped on that port, and other ports then will discard any packets with this MAC address in the destination field. For examp…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.20
rcPortNumStateTransition # state transitions.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.4.10.1.1.21
rcPortQosLevel Used to specify the Qos level packets, carried on this port, should be processed with.	Enumerationr/w Enumerated Values: 0 level0 1 level1 2 level2 3 level3 4 level4 5 level5 6 level6 7 level7	.1.3.6.1.4.1.2272.1.4.10.1.1.30
rcPortDiffServEnable Used to enable/disable the Differentiated Service feature on this port.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.31
rcPortDiffServType Used to specify the Differentiated Service type for this port.	Enumerationr/w Enumerated Values: 0 none 1 access 2 core	.1.3.6.1.4.1.2272.1.4.10.1.1.32
rcPortVendorDescr Used to show the name of the vendor of this port's connector. Only applicable to ports on a GBIC cards.	OctetString Constraints: range: 16-16	.1.3.6.1.4.1.2272.1.4.10.1.1.34
rcPortName This port's name.	OctetStringr/w Constraints: range: 0-42	.1.3.6.1.4.1.2272.1.4.10.1.1.35
rcPortAdminRouting Indicate whether the port is routable.	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.4.10.1.1.43
rcPortOperRouting The status of the port whether is routable.	EnableValue Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.4.10.1.1.44
rcPortIeee8021POverrideEnable Used to enable/disable IEEE 802.1P override. If it is enabled, 802.1p value from a tagged frame may not be honored.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.46
rcPortHighSecureEnable Enable/Disable high secure feature.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.51
rcPortMrouteStrLimit maximum number of multicast streams that are allowed to ingress to CPU through this port.	Integer32r/w Constraints: range: 1-32768	.1.3.6.1.4.1.2272.1.4.10.1.1.55
rcPortMrouteStrTimerCheck sampling period to check number of multicast streams that has ingressed CPU through this port in seconds.	Integer32r/w Constraints: range: 1-3600	.1.3.6.1.4.1.2272.1.4.10.1.1.56
rcPortMrouteStrLimitEnable enable or disable mroute stream limit on port.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.57
rcPortAutoNegAd This object is used to specify the port speed and duplex abilities to be advertised during link negotiation. bit 0 - 10 half duplex advertised bit 1 - 10 full duplex advertised bit 2 - 100 half duplex adv…	Bitsr/w Enumerated Values: 0 advertise10Half 1 advertise10Full 2 advertise100Half 3 advertise100Full 5 advertise1000Full 6 advertiseMacPause 7 advertiseAsymPause 8 advertiseNone	.1.3.6.1.4.1.2272.1.4.10.1.1.62
rcPortAutoRecoverPort enable or disable auto recovery of port from action taken by cp-limit, link flap or loop detect features	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.64
rcPortEgressRateLimit Egress Rate Limit. for VSP 9000, range is 10000 to 10000000	Integer32r/w Constraints: range: 0-0 range: 10000-10000000	.1.3.6.1.4.1.2272.1.4.10.1.1.67
rcPortEgressRateLimitState Used to enable/disable shape/egress-rate-limit functionality.	EnableValuer/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.4.10.1.1.68
rcPortIngressRateLimit Limits the amount of traffic from this Ingress port.	Integer32r/w Constraints: range: 1000-10000000	.1.3.6.1.4.1.2272.1.4.10.1.1.85
rcPortVrfIdList The set of VRF ids to which this port belongs.	OctetString Constraints: range: 0-512	.1.3.6.1.4.1.2272.1.4.10.1.1.87
rcPortVrfNameList The set of VRF names to which this port belongs.	OctetString	.1.3.6.1.4.1.2272.1.4.10.1.1.96
rcPortBrouterVrfId Gives the VRF Id for this Brouter port.	VrfIdentifierr/w Type Constraints: range: 0..512	.1.3.6.1.4.1.2272.1.4.10.1.1.97
rcPortBrouterVrfName Gives the VRF Name for this Brouter port.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.2272.1.4.10.1.1.98
rcPortVrfCount The total number of VRFs this port is associated to.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2272.1.4.10.1.1.99
rcPortIngressRatePeak Peak rate limit for this port. 0 means disable	Integer32r/w Constraints: range: 0-0 range: 64-10000000	.1.3.6.1.4.1.2272.1.4.10.1.1.108
rcPortIngressRateSvc Service rate limit for this port. 0 mean deisable	Integer32r/w Constraints: range: 0-0 range: 64-10000000	.1.3.6.1.4.1.2272.1.4.10.1.1.109
rcPortCpLimitPktRate Used to limit Control packets on the port to qos-levels 6 and 7. Sets the limit in packets per second.	Integer32r/w Constraints: range: 1000-20000	.1.3.6.1.4.1.2272.1.4.10.1.1.110
rcPortCpLimitShutDownEnable Used to indicate if the port should be shutdown when the CpLimitPktRate is exceeded.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.1.1.111

Port pcap Table

rcPortPcapEntry row .1.3.6.1.4.1.2272.1.4.10.2.1

Entry containing pcap info. for a particular port

Indexes

rcPortPcapIndex

Column	Syntax	OID
rcPortPcapIndex An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2.	InterfaceIndex	.1.3.6.1.4.1.2272.1.4.10.2.1.1
rcPortPcapEnable To enable pcap for the port	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.2.1.2
rcPortPcapMode Mode in which pcap is enabled	Enumerationr/w Enumerated Values: 1 tx 2 rx 3 both	.1.3.6.1.4.1.2272.1.4.10.2.1.3

Port LACP table

rcPortLacpEntry row .1.3.6.1.4.1.2272.1.4.10.4.1

Entry containing info. for a particular port

Indexes

rcPortIndex

Column	Syntax	OID
rcPortLacpAdminEnable Administratively enable/disable LACP on a port	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.4.1.1
rcPortLacpOperEnable Indicates if LACP is operationally enabled or disabled on a port	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.4.1.2
rcPortLacpFastPeriodicTime The number of miliseconds between periodic transmissions using Short Timeouts.	Integer32r/w Constraints: range: 200-20000	.1.3.6.1.4.1.2272.1.4.10.4.1.3
rcPortLacpSlowPeriodicTime The number of miliseconds between periodic transmissions using LONG Timeouts.	Integer32r/w Constraints: range: 10000-30000	.1.3.6.1.4.1.2272.1.4.10.4.1.4
rcPortLacpTimeoutScale Scalar value used to calculate timeout time from periodic time. Timeout = PeriodicTime * TimeoutScale	Integer32r/w Constraints: range: 1-10	.1.3.6.1.4.1.2272.1.4.10.4.1.5
rcPortLacpAggrWaitTime The number of mili seconds to delay aggregation to allow multiple links to aggregate simultaneously.	Integer32r/w Constraints: range: 200-2000	.1.3.6.1.4.1.2272.1.4.10.4.1.6
rcPortLacpFastPeriodicTimeOper The operating value of fast periodic timer on the port.	Integer32 Constraints: range: 200-20000	.1.3.6.1.4.1.2272.1.4.10.4.1.7
rcPortLacpSlowPeriodicTimeOper The operating value of slow periodic timer on the port.	Integer32 Constraints: range: 10000-30000	.1.3.6.1.4.1.2272.1.4.10.4.1.8
rcPortLacpTimeoutScaleOper The operating value of timeout scale on the port.	Integer32 Constraints: range: 1-10	.1.3.6.1.4.1.2272.1.4.10.4.1.9
rcPortLacpAggrWaitTimeOper The operating value of aggreagate wait time on port.	Integer32 Constraints: range: 200-2000	.1.3.6.1.4.1.2272.1.4.10.4.1.10

Port Virtual LACP table

rcPortVLacpEntry row .1.3.6.1.4.1.2272.1.4.10.5.1

Entry containing info. for a particular port

Indexes

rcPortIndex

Column	Syntax	OID
rcPortVLacpAdminEnable Administratively enable/disable Virtual LACP on a port	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.5.1.1
rcPortVLacpOperEnable Indicates if Virtual LACP is operationally enabled or disabled on a port	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.5.1.2
rcPortVLacpFastPeriodicTimer The number of miliseconds between periodic transmissions using Short Timeouts	Integer32r/w Constraints: range: 100-20000	.1.3.6.1.4.1.2272.1.4.10.5.1.3
rcPortVLacpSlowPeriodicTimer The number of miliseconds between periodic transmissions using LONG Timeouts.	Integer32r/w Constraints: range: 10000-30000	.1.3.6.1.4.1.2272.1.4.10.5.1.4
rcPortVLacpTimeout Timeout control value. Long or Short Timeout	Enumerationr/w Enumerated Values: 1 short 2 long	.1.3.6.1.4.1.2272.1.4.10.5.1.5
rcPortVLacpTimeoutScale Scalar value used to calculate timeout time from periodic time. Timeout = PeriodicTime * TimeoutScale	Integer32r/w Constraints: range: 1-10	.1.3.6.1.4.1.2272.1.4.10.5.1.6
rcPortVLacpEtherType VLACP Protocol Identification. The id value is in Hex. Range in hex (0x600..0xffff)	Integer32r/w Constraints: range: 1536-65535	.1.3.6.1.4.1.2272.1.4.10.5.1.7
rcPortVLacpEtherMacAddress Multicast Mac Address exclusively used for VLACPDU's	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.4.10.5.1.8
rcPortVLacpPortState Display the Vlacp Port State.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.2272.1.4.10.5.1.9

Port Remote Mirroring Table

rcPortRemoteMirroringEntry row .1.3.6.1.4.1.2272.1.4.10.6.1

Entry containing remote mirroring info. for a
particular port

Indexes

rcPortRemoteMirroringIndex

Column	Syntax	OID
rcPortRemoteMirroringIndex An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2.	InterfaceIndex	.1.3.6.1.4.1.2272.1.4.10.6.1.1
rcPortRemoteMirroringEnable To enable remote Mirroring for the port	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.6.1.2
rcPortRemoteMirroringMode Mode in which remote mirroring is enabled	Enumerationr/w Enumerated Values: 1 source 2 termination	.1.3.6.1.4.1.2272.1.4.10.6.1.3
rcPortRemoteMirroringSrcMac Source Mac of the remote mirrored packet. Remote mirroring packet will be send with this source mac address	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.4.10.6.1.4
rcPortRemoteMirroringDstMac Destination Mac of the remote mirrored packet. Packets will be bridged to this mac address. Remote mirroring packet will be send to this mac address	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2272.1.4.10.6.1.5
rcPortRemoteMirroringEtherType Ethertype of the remote mirrored packet. Packets will be send with this ethertype	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.4.10.6.1.6
rcPortRemoteMirroringVlanIdListSize Used to indicate the number of VLAN IDs that are assigned to this port.	Integer32 Constraints: range: 0-2000	.1.3.6.1.4.1.2272.1.4.10.6.1.7
rcPortRemoteMirroringVlanIdList This field is used only if the port is assigned as remote mirroring termination port. Represents zero or more filter lists vlan in which the Destination Mac address resides. Each VLAN ID is stored as two bytes in th…	OctetStringr/w Constraints: range: 4096-4096	.1.3.6.1.4.1.2272.1.4.10.6.1.8
rcPortRemoteMirroringRowStatus RowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.4.10.6.1.9

Port Lossless Ethernet Table

rcPortLosslessEnetEntry row .1.3.6.1.4.1.2272.1.4.10.13.1

Entry containing lossless Ethernet information
for a particular port.

Indexes

rcPortLosslessEnetIndex

Column	Syntax	OID
rcPortLosslessEnetIndex An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2. Lossless Ethernet will be limited to 10Gig ports.	InterfaceIndex	.1.3.6.1.4.1.2272.1.4.10.13.1.1
rcPortLosslessEnetConfigured To enable lossless mode for the port	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.4.10.13.1.2
rcPortLosslessEnetPauseType Pause frame type. fc - Pause, pfc - priority-based flow control.	Enumerationr/w Enumerated Values: 1 fc 2 pfc	.1.3.6.1.4.1.2272.1.4.10.13.1.3
rcPortLosslessEnetPfcBandwidth Guaranteed bandwidth in Gbps when rcPortLosslessEnetPauseType is set to pfc(2).	Integer32r/w Constraints: range: 2-8	.1.3.6.1.4.1.2272.1.4.10.13.1.4

A table used to maintain IP routing information 
for a particular interface.

rcIpConfEntry row .1.3.6.1.4.1.2272.1.8.1.1.1

Entry containing IP routing information. An entry
is automatically created in this table when routing
is enabled for an interface -or- when an ip address
is configured on an interface.

Indexes

rcIpConfIfIndex

Column	Syntax	OID
rcIpConfIfIndex An unique value to identify a physical interface or a logical interface (VLAN).	Integer32 Constraints: range: 0-6142	.1.3.6.1.4.1.2272.1.8.1.1.1.1
rcIpConfAdvertDefRte Used to indicate whether this interface should advertize a RIP default route.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.2
rcIpConfAcceptDefRte Used to indicate whether this interface should accept a RIP default route.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.3
rcIpConfRowStatus Row status for this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.1.1.1.4
rcIpConfRipEnable Enable or disable RIP routing on the specified interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.5
rcIpConfOspfEnable Enable or disable OSPF routing on the specified interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.6
rcIpConfIgmpEnable Enable or disable IGMP on the specified interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.7
rcIpConfAddrAssigned Indicate whether IpAddress has been assigned for this interface.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.8
rcIpConfDhcpEnable Enable or disable DHCP on the specified interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.9
rcIpConfTriggeredUpdateEnable Used to indicate whether the RIP triggered update feature should be enabled on this interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.10
rcIpConfAutoAggrerateEnable Used to indicate whether the auto aggregation feature should be enabled on this interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.11
rcIpConfGenerateDefaultRoute Used to indicate whether to generate a default RIP route on this interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.12
rcIpConfAdvertiseWhenDown The value is used indicated whether vlan state change should be notified to layer 3 or not, provided the vlan is configured as routable interface. Also used for single routable ports, in that case the criteria for state…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.13
rcIpConfDirectBroadcastEnable Used to indicate whether this interface should forward direct broadcast traffic	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.14
rcIpConfRipInPolicy Used to indicate whether this interface should advertize a RIP default route.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.8.1.1.1.15
rcIpConfRipOutPolicy Used to indicate whether this interface should accept a RIP default route.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.2272.1.8.1.1.1.16
rcIpConfOspfIfType OSPF Interface Type.	Enumerationr/w Enumerated Values: 1 broadcast 2 nbma 3 pointToPoint 5 pointToMultipoint 99 passive	.1.3.6.1.4.1.2272.1.8.1.1.1.17
rcIpConfRipCost Used to indicate the rip cost for this interface.	Integer32r/w Constraints: range: 1-15	.1.3.6.1.4.1.2272.1.8.1.1.1.18
rcIpConfRipHolddown Used to indicate the rip holddown timer for this interface	Integer32r/w Constraints: range: 0-360	.1.3.6.1.4.1.2272.1.8.1.1.1.19
rcIpConfRipTimeout Used to indicate the rip timeout interval for this interface	Integer32r/w Constraints: range: 15-259200	.1.3.6.1.4.1.2272.1.8.1.1.1.20
rcIpConfRsmltEnable Used to enable Route Smlt feature.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.21
rcIpConfReversePathCheckEnable Used to indicate whether this interface should perform Reverse Path Check	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.22
rcIpConfReversePathCheckMode Reverse Path Checking mode.	Enumerationr/w Enumerated Values: 1 exist-only 2 strict	.1.3.6.1.4.1.2272.1.8.1.1.1.23
rcIpConfIpVpnLiteEnable Enable or disable ipvpn-lite capability on the specified circuitless ip interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2272.1.8.1.1.1.26

A table used to maintain OSPF information
for a particular interface.

rcIpConfOspfEntry row .1.3.6.1.4.1.2272.1.8.1.2.1

Entry containing OSPF information. An entry is
automatically created in this table when routing
is enabled for an interface -or- when an ip address
is configured on an interface.

Indexes

rcIpConfOspfIfIndex

Column	Syntax	OID
rcIpConfOspfIfIndex An unique value to identify a physical interface or a logical interface (VLAN).	Integer32 Constraints: range: 0-6142	.1.3.6.1.4.1.2272.1.8.1.2.1.1
rcIpConfOspfRtrPriority The priority of this interface. Used in multi- access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on …	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2272.1.8.1.2.1.2
rcIpConfOspfMetric The metric for this type of service (TOS) on this interface. The default value of the TOS 0 Metric is (10^9 / ifSpeed). The value FFFF means 'no route via this TOS'. A value of 0 means the interface speed (rcIpConfO…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2272.1.8.1.2.1.3
rcIpConfOspfAuthKey The Authentication Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. Note that unauthenticated i…	OctetStringr/w Constraints: range: 0-8	.1.3.6.1.4.1.2272.1.8.1.2.1.4
rcIpConfOspfRowStatus Row status for this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2272.1.8.1.2.1.5
rcIpConfOspfHelloInterval The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2272.1.8.1.2.1.6
rcIpConfOspfRtrDeadInterval The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers at…	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.8.1.2.1.7
rcIpConfOspfIfAreaId A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2272.1.8.1.2.1.8
rcIpConfOspfAuthType The authentication type specified for an interface. Additional authentication types may be assigned locally.	Enumerationr/w Enumerated Values: 0 none 1 simplePassword 2 md5	.1.3.6.1.4.1.2272.1.8.1.2.1.9
rcIpConfOspfPollInterval OSPF NBMA Interface Poll Interval.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.2272.1.8.1.2.1.10
rcIpConfOspfIfMtuIgnore Mtu-ignore flag is for ignoring the mtu checking in ospf bdb	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2272.1.8.1.2.1.11